1. //
  2. Start
  3. //
  4. Publications
  5. //
  6. Browse
  7. //

Browse by research area

401 - 500 out of 1,666Page size: 100

  1. Formation mechanism of the abnormal texture during extrusion in Mg-Y-Sm-Zn-Zr alloy

    Lyu, S., Xiao, W., Li, G., Xia, D., Huang, Y., Gavras, S., Hort, N., Zheng, R. & Ma, C., 25.04.2020, In: Journal of Alloys and Compounds. 821, 153477.

    Research output: Journal contributions › Journal articles › Research › peer-review

  2. Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance

    Buzolin, R. H., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 01.03.2020, In: Materials and Corrosion. 71, 3, p. 339-351 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  3. Investigation and Modelling of the Influence of Cooling Rates on the Microstructure of AZ91 Alloys

    Gavras, S., Bilal, M. U., Tolnai, D. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 281-287 7 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  4. Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary Alloys

    Xu, Y., Yang, L., Liu, W., Sun, J., Xiao, L., Jiang, X. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 79-85 7 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  5. In-situ synchrotron investigation of the phasesand their morphology-development in Mg-Nd-Zn alloys

    Tolnai, D., Sosro, T., Gavras, S., Buzolin, R. H. & Hort, N., 01.2020, In: International Journal of Materials Research. 111, 1, p. 4-10 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  6. Achieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatment

    Wang, K., Dou, X., Wang, J., Huang, Y., Gavras, S., Hort, N., Liu, S., Hu, H., Wang, J. & Pan, F., 14.07.2020, In: Materials Science and Engineering A. 790, 139635.

    Research output: Journal contributions › Journal articles › Research › peer-review

  7. Biodegradable Materials for Medical Applications II

    Drelich, J. W., Sikora-Jasinska, M., Mostaed, E., Liu, H., Maier, P., Seitz, J. M. & Hort, N., 01.05.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 5, p. 1830-1832 3 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  8. Influence of Solution Heat Treatment on the Microstructure, Hardness and Stress Corrosion Behavior of Extruded Resoloy®

    Maier, P., Steinacker, A., Clausius, B. & Hort, N., 01.05.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 5, p. 1870-1879 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  9. Microstructure and mechanical properties of large-scale Mg-Gd-Y-Zn-Mn alloys prepared through semi-continuous casting

    Wang, K., Wang, J., Dou, X., Huang, Y., Hort, N., Gavras, S., Liu, S., Cai, Y., Wang, J. & Pan, F., 01.09.2020, In: Journal of Materials Science and Technology. 52, p. 72-82 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  10. Microstructural, mechanical and corrosion characterization of an as-cast Mg–3Zn–0.4Ca alloy for biomedical applications

    Pulido-González, N., Torres, B., Rodrigo, P., Hort, N. & Rams, J., 01.06.2020, In: Journal of Magnesium and Alloys. 8, 2, p. 510-522 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  11. Characterization of an extruded Mg-Dy-Nd alloy during stress corrosion with C-ring tests

    Maier, P., Clausius, B., Wicke, J. & Hort, N., 05.2020, In: Metals. 10, 5, 16 p., 584.

    Research output: Journal contributions › Journal articles › Research › peer-review

  12. Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates

    Yu, J., Song, B., Xia, D., Zeng, X., Huang, Y., Hort, N., Mao, P. & Liu, Z., 01.09.2020, In: Journal of Magnesium and Alloys. 8, 3, p. 849-859 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  13. Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature

    Xia, D., Zhang, J., Chen, X., Huang, G., Jiang, B., Tang, A., Gavras, S., Huang, Y., Hort, N. & Pan, F., 03.07.2020, In: Materials Science and Engineering A. 789, 139599.

    Research output: Journal contributions › Journal articles › Research › peer-review

  14. Effects of Intermetallic Microstructure on Degradation of Mg-5Nd Alloy

    Zhang, Y., Huang, Y., Feyerabend, F., Gavras, S., Xu, Y., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 01.10.2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 10, p. 5498-5515 18 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  15. Predicting the interfacial heat transfer coefficient of cast Mg-Al alloys using Beck's inverse analysis

    Bilal, M. U. & Hort, N., 12.06.2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 8 p., 012027.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  16. In vivo assessment of biodegradable magnesium alloy ureteral stents in a pig model

    Tie, D., Liu, H., Guan, R., Holt-Torres, P., Liu, Y., Wang, Y. & Hort, N., 15.10.2020, In: Acta Biomaterialia. 116, p. 415-425 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  17. Magnesium alloys for biomedical applications

    Maier, P. & Hort, N., 05.10.2020, In: Metals. 10, 10, p. 1-3 3 p., 1328.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  18. Restoration mechanisms at moderate temperatures for As-Cast ZK40 magnesium alloys modified with individual Ca and Gd additions

    Buzolin, R. H., Guimaraes, L. H. M., Díaz, J. A. Á., Silva, E. P. D., Tolnai, D., Mendis, C. L., Hort, N. & Pinto, H. C., 16.12.2020, In: Crystals. 10, 12, p. 1-22 22 p., 1140.

    Research output: Journal contributions › Journal articles › Research › peer-review

  19. Published

    3D Simulation of Electric Arcing and Pressure increase in an Automotive HVDC Relay During a Short Circuit Situation

    Ewuntomah, C. M. & Oberrath, J., 30.09.2020, ELECTRICAL CONTACTS 2020 - Proceedings of the 66th IEEE Holm Conference on Electrical Contacts and Intensive Course, HLM 2020. San Antonio: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 58-64 7 p. 9307918. (Electrical contacts (IEEE Holm Conference on Electrical Contacts Online); no. 66).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  20. Published

    Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel

    Batistao, B. F., Bergmann, L., Gargarella, P., de Alcantara, N. G., dos Santos, J. F. & Klusemann, B., 01.11.2020, In: Journal of Materials Research and Technology. 9, 6, p. 15132-15142 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  21. Published

    New ways in engineering education for a sustainable and smart future

    Block, B. M. & Haus, B., 21.10.2020, 2020 IEEE Frontiers in Education Conference: FIE 2020 - Proceedings. Uppsala: IEEE - Institute of Electrical and Electronics Engineers Inc., 9 p. 9273900. (IEEE Frontiers in Education Conference; vol. 1539-4565).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  22. Published

    A Dual Kalman Filter to Identify Parameters of a Permanent Magnet Synchronous Motor

    Zwerger, T. & Mercorelli, P., 08.10.2020, 2020 24th International Conference on System Theory, Control and Computing (ICSTCC) : October 8-10, 2020 Sinaia, Romania, Proceedings . Bărbulescu, L-F. (ed.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 619-623 5 p. 9259686

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  23. Published

    Analysis and Implementation of a Resistance Temperature Estimator Based on Bi-Polynomial Least Squares Method and Discrete Kalman Filter

    Schimmack, M., Rehbein, J. P. & Mercorelli, P., 08.10.2020, 2020 24th International Conference on System Theory, Control and Computing (ICSTCC) : October 8-10, 2020 Sinaia, Romania, Proceedings . Bărbulescu, L-F. (ed.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 614-618 5 p. 9259767

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  24. Published

    Combining a PI Controller with an Adaptive Feedforward Control in PMSM

    Zwerger, T. & Mercorelli, P., 27.10.2020, Proceedings of the 2020 21st International Carpathian Control Conference (ICCC): Virtual Conference, Košice, Slovak Republic October 27 - 29, 2020 . Petráš, I. & Kačur, J. (eds.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 5 p. 9257288

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  25. Published

    Controlling a Bank Model Economy by Using an Adaptive Model Predictive Control with Help of an Extended Kalman Filter

    Samson, H. R. & Mercorelli, P., 27.10.2020, Proceedings of the 2020 21st International Carpathian Control Conference (ICCC): Virtual Conference, Košice, Slovak Republic October 27 - 29, 2020 . Petráš, I. & Kačur, J. (eds.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. 9257221

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  26. Published

    Case Study: Application of NNARX Networks in the Identification of a Small-Scale Level System

    Santos Neto, A. F. D., Santos, M. F. D., Santiago, A. C., Vidal, V. F. & Mercorelli, P., 2019, 2019 3rd European Conference on Electrical Engineering and Computer Science, EECS 2019: Athens, Greece 28-30 December 2019, Proceedings . Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 15-18 4 p. 9257574

    Research output: Contributions to collected editions/works › Conference contribution › peer-review

  27. Published

    PI and Fuzzy Controllers for Non-Linear Systems: A Case Study

    Machado, C. M., Santos, M. F. D., Carvalho, J. R. D. & Mercorelli, P., 2019, 2019 3rd European Conference on Electrical Engineering and Computer Science, EECS 2019: Athens, Greece 28-30 December 2019, Proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 11-14 4 p. 9257571

    Research output: Contributions to collected editions/works › Conference contribution › peer-review

  28. Published

    Patient Positioning in Radiotherapy

    Guo, W., Müller-Polyzou, R., Chen, Z., Meier, N. & Georgiadis, A., 01.06.2020, IEEE Medical Measurements and Applications, MeMeA 2020 - Conference Proceedings: IEEE Medical Measurements and Applications, June 1-3, 2020, Bari, Italy. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. 9137355. (IEEE Medical Measurements and Applications, MeMeA 2020 - Conference Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  29. Published

    Efficiency and usability of industrial laser assistance systems in composite preforming: a comparativ user study

    Dammers, H., Schlesinger, Y., Müller-Polyzou, R., Kehr, M., Wiche, M-K., Huber, P. & Gries, T., 2020, SAMPE Europe Conference 2020. Amsterdamm: Society for the Advancement of Material and Process Engineering, 8 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  30. Published

    Dynamically changing sequencing rules with reinforcement learning in a job shop system with stochastic influences

    Heger, J. & Voß, T., 14.12.2020, Proceedings of the 2020 Winter Simulation Conference, WSC 2020. Bae, K-H., Feng, B., Kim, S., Lazarova-Molnar, S., Zheng, Z., Roeder, T. & Thiesing, R. (eds.). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1608 - 1618 11 p. 9383903. (Proceedings - Winter Simulation Conference; vol. 2020-December).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  31. Published

    Investigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel (R) 625

    Landell, R. M., de Lima Lessa, C. R., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F. & Klusemann, B., 01.03.2021, In: Welding in the World. 65, 3, p. 393-403 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  32. Published

    Digitalisierung aus der Perspektive Fachdidaktischer Forschung und Ingenieurwissenschaftlicher Lehrpraxis

    Block, B-M. & Klusemann, B., 2020, 14. Ingenieurpädagogischen Regionaltagung 2019: Technische Bildung im Kontext von 'Digitalisierung' / 'Automatisierung' - Tendenzen, Möglichkeiten, Perspektiven. Petersen, M. & Kammasch, G. (eds.). Berlin: Ingenieur-Pädagogische Wissenschaftsgesellschaft, p. 147-155 8 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  33. Published

    Multiphase-field modeling of temperature-driven intermetallic compound evolution in an Al-Mg system for application to solid-state joining processes

    Raza, S. H. & Klusemann, B., 12.2020, In: Modelling and Simulation in Materials Science and Engineering. 28, 8, 085003.

    Research output: Journal contributions › Journal articles › Research › peer-review

  34. Published

    Single Robust Proportional-Derivative Control for Friction Compensation in Fast and Precise Motion Systems With Actuator Constraint

    Zheng, C., Su, Y. & Mercorelli, P., 01.11.2020, In: Journal of Dynamic Systems, Measurement and Control. 142, 11, 10 p., 114505.

    Research output: Journal contributions › Journal articles › Research › peer-review

  35. Published

    Case Study: Aspects of Fuzzy Controller Implementation in Embedded Systems

    Muniz, L. M., Carmo, M. J., Santos, M. F., Santos Neto, A. F. & Mercorelli, P., 2020, 2nd International Conference on Mathematics and Computers in Science and Engineering (MACISE 2020): Proceedings, Madrid, Spain 18-20 January 2020 . Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 155-158 4 p. 9195570

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  36. Published

    Classical PI Controllers with Anti-Windup Techniques Applied on Level Systems: An Interesting Case Study

    Costa, K. C., MacHareth, G. A., Santos, M. F. & Mercorelli, P., 2020, 2nd International Conference on Mathematics and Computers in Science and Engineering (MACISE): Proceedings, Madrid, Spain 18-20 January 2020 . Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 163-166 4 p. 9195569

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  37. Published

    Emerging Technologies for Improving Access to Radiation Therapy

    Wirtz, H., Müller-Polyzou, R., Engbert, A., Bücker, R., Azangwe, P. G., Kron, T., Petrovic, M., Hasan, M. & Okonkwo, E. C. N., 09.2020, The Modern Technology of Radiation Oncology: A Compendium for Medical Physicists and Radiation Oncologists. van Dyk, J. (ed.). Madison : Medical Physics Publishing, Vol. 4. p. 461-487

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  38. Published

    Datenbasierte Ursachenanalysen zur Verbesserung der logistischen Zielerreichung

    Schmidt, M., Maier, J. T. & Härtel, L., 09.2020, Mensch-Technik-Interaktion in der digitalisierten Arbeitswelt. Freitag, M. (ed.). Berlin: GITO mbH Verlag, p. 171-191 21 p. (Schriftenreihe der Wissenschaftlichen Gesellschaft für Arbeits- und Betriebsorganisation (WGAB) e.V.).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  39. Published

    Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints

    Wen, Q., Li, W., Patel, V., Bergmann, L., Klusemann, B. & dos Santos, J. F., 01.01.2021, In: Acta Metallurgica Sinica (English Letters). 34, 1, p. 125-134 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  40. Published

    Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding

    Yamin, M. F., Awang, M., Suhuddin, U. F. H., Sallih, N., Klusemann, B. & dos Santos, J. F., 01.06.2020, In: Materialwissenschaft und Werkstofftechnik. 51, 6, p. 830-835 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  41. Published

    Experimentally established correlation of friction surfacing process temperature and deposit geometry

    Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 15.09.2020, In: Surface and Coatings Technology. 397, 7 p., 126040.

    Research output: Journal contributions › Journal articles › Research › peer-review

  42. Published

    Fusion of knowledge bases for better navigation of wheeled mobile robotic group with 3D TVS

    Sergiyenko, O., Tyrsa, V., Ivanov, M., Mercorelli, P., Hernandez, W. & Kolendovska, M., 01.06.2020, 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 532-537 6 p. 9161957

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  43. Published

    Decision-making models for Robotic Warehouse

    Tsymbal, O., Bronnikov, A. & Mercorelli, P., 01.06.2020, 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020. Sorrento, Italy: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 544-549 6 p. 9161933

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  44. Published

    Study of non-linear systems: Pi and fuzzy controllers performances

    Machado, C. M., Santos, M. F., Carvalho, J. R. & Mercorelli, P., 11.05.2020, In: WSEAS Transactions on Power Systems. 15, p. 79-86 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  45. Published

    Study of fuzzy controllers performance: application on embedded systems

    Muniz, L. M., Carmo, M. J., Santos, M. F., Santos Neto, A. F. & Mercorelli, P., 12.05.2020, In: WSEAS Transactions on Power Systems. 15, p. 87-93 7 p., 10.

    Research output: Journal contributions › Journal articles › Research › peer-review

  46. Published

    Comments on “Modular-Controller-Design-Based Fast Terminal Sliding Mode for Articulated Exoskeleton Systems”

    Su, Y., Zheng, C. & Mercorelli, P., 01.07.2020, In: IEEE Transactions on Control Systems Technology. 28, 4, p. 1621-1623 3 p., 8673618.

    Research output: Journal contributions › Comments / Debate / Reports › Research

  47. Published

    On the influence of laser beam welding parameters for autogenous AA2198 welded joints

    Examilioti, T., Kashaev, N., Enz, J., Klusemann, B. & Alexopoulos, N. D., 01.09.2020, In: The International Journal of Advanced Manufacturing Technology. 110, 7-8, p. 2079-2092 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  48. Published

    Identifying user assistance systems for radiotherapy to increase efficiency and help saving lives

    Müller-Polyzou, R., Reuter-Oppermann, D. M., Engbert, A. & Schmidt, R., 02.10.2021, In: Health Systems. 10, 4, p. 318-336 19 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  49. Published

    Geometric analysis of a laser scanner functioning based on dynamic triangulation

    Sepulveda-Valdez, C., Sergiyenko, O., Tyrsa, V., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Murrienta-Rico, F. N., Miranda-Vega, J. E., Mercorelli, P. & Kolendovska, M., 01.06.2020, 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE 2020): 17 - 19 June, 2020, Delft, Netherlands, Proceedings . IEEE. I. E. S. (ed.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1398-1403 6 p. 9152268. (IEEE International Symposium on Industrial Electronics (ISIE); vol. 2020).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  50. Published

    The Use of Factorization and Multimode Parametric Spectra in Estimating Frequency and Spectral Parameters of Signal

    Semenets, V., Kartashov, V., Sergiyenko, O., Tikhonov, V., Mercorelli, P., Sheiko, S., Kudriavtseva, N. C., Rodriguez-Quinonez, J. C. & Flores-Fuentes, W., 01.06.2020, 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE): 17 - 19 June, 2020, Delft, Netherlands, Proceedings . IEEE. I. E. S. (ed.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 215-219 5 p. 9152238. (IEEE International Symposium on Industrial Electronics (ISIE); vol. 2020).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  51. Published

    A Lean Convolutional Neural Network for Vehicle Classification

    Sanchez-Castro, J. J., Rodriguez-Quinonez, J. C., Ramirez-Hernandez, L. R., Galaviz, G., Hernandez-Balbuena, D., Trujillo-Hernandez, G., Flores-Fuentes, W., Mercorelli, P., Hernandez-Perdomo, W., Sergiyenko, O. & Gonzalez-Navarro, F. F., 01.06.2020, 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE): 17 - 19 June, 2020, Delft, Netherlands, Proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1365-1369 5 p. 9152274. (IEEE International Symposium on Industrial Electronics (ISIE); vol. 2020).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  52. Published

    Machine Learning-Supported Planning of Lead Times in Job Shop Manufacturing

    Kramer, K., Wagner, C. & Schmidt, M., 2020, Advances in Production Management Systems. The Path to Digital Transformation and Innovation of Production Management Systems - IFIP WG 5.7 International Conference, APMS 2020, Proceedings: The Path to Digital Transformation and Innovation of Production Management Systems IFIP WG 5.7 International Conference, APMS 2020 Novi Sad, Serbia, August 30 – September 3, 2020 Proceedings, Part I. Lalic, B., Marjanovic, U., Majstorovic, V., von Cieminski, G. & Romero, D. (eds.). Cham: Springer, Vol. 1. p. 363-370 8 p. (IFIP Advances in Information and Communication Technology; vol. 591 IFIP).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  53. Published

    Supporting the Decision of the Order Processing Strategy by Using Logistic Models: A Case Study

    Maier, J. T., Heuer, T., Nyhuis, P. & Schmidt, M., 2020, Advances in Production Management Systems: The Path to Digital Transformation and Innovation of Production Management Systems; IFIP WG 5.7 International Conference, APMS 2020 Novi Sad, Serbia, August 30 – September 3, 2020 Proceedings, Part I. Lalic, B., Marjanovic, U., Majstorovic, V., von Cieminski, G. & Romero, D. (eds.). Cham: Springer, Vol. 1. p. 343-350 8 p. (IFIP Advances in Information and Communication Technology; vol. 591).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  54. Published

    Business and Economics: Metrics and Peer Review in the journal: "WSEAS Transactions on Business and Economics"

    Bardis, N., Ekonomou, L., Borne, P., Ntalianis, K., Mercorelli, P., Katehakis, M. N., Kintzios, N., Bulucea, C. A. & Planas, M. I. G., 29.06.2020, In: Journal of Physics: Conference Series. 1564, 3 p., 012025.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  55. Published

    Feedforward and repetitive control of a servo piezo-mechanical hydraulic actuator

    Mercorelli, P., 29.06.2020, In: Journal of Physics: Conference Series. 1564, 5 p., 012005.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  56. Published

    Dual Kalman Filters Analysis for Interior Permanent Magnet Synchronous Motors

    Zwerger, T. & Mercorelli, P., 01.01.2020, Advanced, Contemporary Control : Proceedings of KKA 2020—The 20th Polish Control Conference, Łódź, Poland, 2020. Bartoszewicz, A., Kabziński, J. & Kacprzyk, J. (eds.). Cham: Springer, Vol. 1. p. 424-435 12 p. (Advances in Intelligent Systems and Computing; vol. 1196).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  57. Published

    Advances in Dynamics, Optimization and Computation: A volume dedicated to Michael Dellnitz on the occasion of his 60th birthday

    Junge, O. (ed.), Schütze, O. (ed.), Froyland, G. (ed.), Ober-Blöbaum, S. (ed.) & Padberg-Gehle, K. (ed.), 2020, Cham: Springer. 392 p. (Studies in Systems, Decision and Control; vol. 304)

    Research output: Books and anthologies › Collected editions and anthologies › Research

  58. Published

    Auslegung der Auftragsabwicklungsstrategie: Modellbasierte Entscheidungsunterstützung zur Sicherung der Wettbewerbsfähigkeit produzierender Unternehmen

    Heuer, T., Maier, J. T., Seitz, M., Schmidt, M. & Nyhuis, P., 06.2020, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 115, 6, p. 399-404 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  59. Published

    Combined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peening

    Sandmann, P., Nielsen, M. A., Keller, S., Maawad, E., Staron, P. & Klusemann, B., 01.08.2020, In: Strain. 56, 4, 17 p., e12338.

    Research output: Journal contributions › Journal articles › Research › peer-review

  60. Published

    Two-pass friction stir welding of cladded API X65

    de Lima Lessa, C. R., Landell, R. M., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F., Reguly, A. & Klusemann, B., 01.05.2020, In: Procedia Manufacturing. 47, p. 1010-1015 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  61. Published

    Friction riveting of 3D printed polyamide 6 with AA 6056-T6

    dos Santos Mallmann, P. H., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 05.2020, In: Procedia Manufacturing. 47, p. 406-412 7 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  62. Published

    Mechanical performance prediction for friction riveting joints of dissimilar materials via machine learning

    Bock, F. E., Blaga, L. A. & Klusemann, B., 05.2020, In: Procedia Manufacturing. 47, p. 615-622 8 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  63. Published

    NNARX networks on didactic level system identification

    Santos Neto, A. F., Santos, M. F., Santiago, A. C., Vidal, V. F. & Mercorelli, P., 2020, In: WSEAS Transactions on Systems and Control. 15, p. 184-190 7 p., 19.

    Research output: Journal contributions › Journal articles › Research › peer-review

  64. Published

    Eine bibliometrische Analyse: Produktionsplanung und -steuerung und maschinelles Lernen

    Schmidt, M., Maier, J. T. & Grothkopp, M., 14.05.2020, In: wt Werkstattstechnik online. 110, 4, p. 220-225 6 p.

    Research output: Journal contributions › Journal articles › Research

  65. Published

    Influence of the pandemic dissemination of COVID-19 on radiotherapy practice: A flash survey in Germany, Austria and Switzerland

    Reuter-Oppermann, M., Müller-Polyzou, R., Wirtz, H. & Georgiadis, A., 21.05.2020, In: PLoS ONE. 15, 5, 17 p., e0233330.

    Research output: Journal contributions › Journal articles › Research › peer-review

  66. Published

    Analysis of PI controllers with anti-windup techniques on level systems

    Mariquito, K. C. C., Machareth, G. A., Santos, M. F., Mercorelli, P. & Rocha, L. G., 01.01.2020, In: WSEAS Transactions on Environment and Development. 16, p. 243-249 7 p., 25.

    Research output: Journal contributions › Journal articles › Research › peer-review

  67. Published

    Anomaly detection in formed sheet metals using convolutional autoencoders

    Heger, J., Desai, G. & Zein El Abdine, M., 01.01.2020, In: Procedia CIRP. 93, p. 1281-1285 5 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  68. Published

    The influence of laser shock peening on fatigue properties of AA2024-T3 alloy with a fastener hole

    Sikhamov, R., Fomin, F., Klusemann, B. & Kashaev, N., 09.04.2020, In: Metals. 10, 4, 13 p., 495.

    Research output: Journal contributions › Journal articles › Research › peer-review

  69. Published

    Regulation of a servo piezo mechanical hydraulic actuator for intake valves in camless combustion engines

    Mercorelli, P., 02.05.2020, In: WSEAS Transactions on Applied and Theoretical Mechanics. 15, p. 46-51 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  70. Published

    On the application of laser shock peening for retardation of surface fatigue cracks in laser beam-welded AA6056

    Kashaev, N., Ushmaev, D., Ventzke, V., Klusemann, B. & Fomin, F., 01.07.2020, In: Fatigue and Fracture of Engineering Materials and Structures. 43, 7, p. 1500-1513 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  71. Published

    2D Simulations of the NS-Laser Shock Peening

    Pozdnyakov, V. & Oberrath, J., 06.2019, 2019 IEEE Pulsed Power and Plasma Science, PPPS 2019. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 4 p. 9009984. (IEEE International Pulsed Power Conference; vol. 2019-June).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  72. Published

    Editorial: Machine Learning and Data Mining in Materials Science

    Huber, N., Kalidindi, S. R., Klusemann, B. & Cyron, C. J., 28.02.2020, In: Frontiers in Materials. 7, 3 p., 51.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  73. Published

    Influence of data clouds fusion from 3D real-time vision system on robotic group dead reckoning in unknown terrain

    Ivanov, M., Sergyienko, O., Tyrsa, V., Lindner, L., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Hernandez, W. & Mercorelli, P., 01.03.2020, In: IEEE/CAA Journal of Automatica Sinica. 7, 2, p. 368-385 18 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  74. Published

    Extended Kalman Filter for Temperature Estimation and Control of Peltier Cells in a Novel Industrial Milling Process

    Mironova, A., Haus, B., Zedler, A. & Mercorelli, P., 01.03.2020, In: IEEE Transactions on Industry Applications. 56, 2, p. 1670-1678 9 p., 8954802.

    Research output: Journal contributions › Journal articles › Research › peer-review

  75. Published

    Polynomial Augmented Extended Kalman Filter to Estimate the State of Charge of Lithium-Ion Batteries

    Haus, B. & Mercorelli, P., 02.2020, In: IEEE Transactions on Vehicular Technology. 69, 2, p. 1452-1463 12 p., 8933348.

    Research output: Journal contributions › Journal articles › Research › peer-review

  76. Published

    Data based root cause analysis for improving logistic key performance indicators of a company’s internal supply chain

    Schmidt, M., Maier, J. T. & Härtel, L., 2020, In: Procedia CIRP. 86, p. 276-281 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  77. Published

    Production of aluminum AA7075/6060 compounds by die casting and hot extrusion

    Greß, T., Mittler, T., Chen, H., Stahl, J., Schmid, S., Ben Khalifa, N. & Volk, W., 01.06.2020, In: Journal of Materials Processing Technology. 280, 12 p., 116594.

    Research output: Journal contributions › Journal articles › Research › peer-review

  78. Published

    Diffusion-driven microstructure evolution in OpenCalphad

    Herrnring, J., Sundman, B. & Klusemann, B., 01.04.2020, In: Computational Materials Science. 175, 10 p., 109236.

    Research output: Journal contributions › Journal articles › Research › peer-review

  79. Published

    Robust approximate fixed-time tracking control for uncertain robot manipulators

    Su, Y., Zheng, C. & Mercorelli, P., 01.01.2020, In: Mechanical Systems and Signal Processing. 135, 1, 17 p., 106379.

    Research output: Journal contributions › Journal articles › Research › peer-review

  80. Published

    Fatigue crack propagation influenced by laser shock peening introduced residual stress fields in aluminium specimens

    Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.01.2020, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing: Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Niepokolczycki, A. & Komorowski, J. (eds.). Cham, Schweiz: Springer, p. 617-631 15 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  81. Verfahren zur Herstellung thermoplastischer Faser-Metall-Laminat-Bauteile mittels Umformverfahren sowie entsprechend hergestellte Faser-Metall-Laminat-Bauteile

    André, K., Ben Khalifa, N., Güner, A., Henning, F., Mennecart, T., Rösner, A. & Tekkaya, A. E., 30.07.2015, IPC No. B32B 15/14 , Deutsches Patent- und Markenamt, Patent No. 10 2014 001 132, 27.01.2014, Priority date 30.07.2015, Priority No. DE102014001132A1

    Research output: Patents › Patent

  82. Energy management based on fractional open circuit and P-SSHI techniques for piezoelectric energy harvesting

    Zouari, M., Naifar, S., Bouattour, G., Derbel, N. & Kanoun, O., 01.01.2019, In: Technisches Messen. 86, 1, p. 14-24 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  83. Passive Peak Voltage Sensor for Multiple Sending Coils Inductive Power Transmission System

    Bouattour, G., Kallel, B., Derbel, H. B. J. & Kanoun, O., 07.2019, 2019 IEEE International Symposium on Measurements and Networking, M and N 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 8804989. (2019 IEEE International Symposium on Measurements and Networking, M and N 2019 - Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  84. Multi-Parallel Sending Coils for Movable Receivers in Inductive Charging Systems

    Bouattour, G., Ben Jemaa Derbel, H. & Kanoun, O., 03.2019, 16th International Multi-Conference on Systems, Signals and Devices, SSD 2019. Institute of Electrical and Electronics Engineers Inc., p. 758-762 5 p. 8893249. (International Multi-Conference on Systems, Signals and Devices, SSD 2019; vol. 18).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  85. Investigation on Flexible Coils Geometries for Inductive Power Transmission Systems

    Bouattour, G., Chen, X., Ben Jmeaa Derbel, H. & Kanoun, O., 30.10.2019, 2019 5th International Conference on Nanotechnology for Instrumentation and Measurement, NanofIM 2019. Institute of Electrical and Electronics Engineers Inc., 9233478. (2019 5th International Conference on Nanotechnology for Instrumentation and Measurement, NanofIM 2019).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  86. Elastomeric Prepregs for Soft Robotics Applications

    Wienzek, T. & Seibel, A., 05.2019, In: Advanced Engineering Materials. 21, 5, 6 p., 1801200.

    Research output: Journal contributions › Journal articles › Research › peer-review

  87. On-board pneumatic pressure generation methods for soft robotics applications

    Adami, M. & Seibel, A., 23.12.2018, In: Actuators. 8, 1, 35 p., 2.

    Research output: Journal contributions › Scientific review articles › Research

  88. Passive Rotation of Rotational Joints and Its Computation Method

    Du, S., Schlattmann, J., Schulz, S. & Seibel, A., 14.06.2019, Advances in Mechanism and Machine Science : Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science . Uhl, T. (ed.). Cham: Springer Schweiz, p. 357-366 10 p. (Mechanisms and Machine Science; vol. 73).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  89. Assembly Modes of General Planar 3-RPR Parallel Mechanisms when Using the Linear Actuators’ Orientations

    Schulz, S., Seibel, A. & Schlattmann, J., 06.2019, Advances in Mechanism and Machine Science: Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science . Uhl, T. (ed.). Cham: Springer Schweiz, p. 279-288 10 p. (Mechanisms and Machine Science; vol. 73).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  90. Toward a gecko-inspired, climbing soft robot

    Schiller, L., Seibel, A. & Schlattmann, J., 19.12.2019, In: Frontiers in Neurorobotics. 13, 9 p., 106.

    Research output: Journal contributions › Journal articles › Research › peer-review

  91. A simple control strategy for increasing the soft bending actuator performance by using a pressure boost

    Pinto, B. A., Schiller, L. & Seibel, A., 11.11.2019, ASME 2019 International Mechanical Engineering Congress and Exposition : Volume 4: Dynamics, Vibration, and Control. The American Society of Mechanical Engineers(ASME), 9 p. V004T05A065. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 4).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  92. Recycling-oriented design in soft robotics

    Nguyen, A. M. & Seibel, A., 09.2019, In: Actuators. 8, 3, 11 p., 62.

    Research output: Journal contributions › Journal articles › Research › peer-review

  93. Solution for the direct kinematics problem of the general stewart-gough platform by using only linear actuators’ orientations

    Schulz, S., Seibel, A. & Schlattmann, J., 2019, Advances in Robot Kinematics 2018 . Lenarcic, J. & Parenti-Castelli, V. (eds.). Springer Science and Business Media B.V., p. 56-64 9 p. (Springer Proceedings in Advanced Robotics; vol. 8).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  94. Published

    Learning Rotation Sensitive Neural Network for Deformed Objects' Detection in Fisheye Images

    Chen, Z. & Georgiadis, A., 11.2019, 2019 4th International Conference on Robotics and Automation Engineering (ICRAE 2019): November 22-24, 2019, Singapore . Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 125-129 5 p. 9043800. (International Conference on Robotics and Automation Engineering, ICRAE ; vol. 4).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  95. Microstructures and mechanical properties of a hot-extruded Mg−8Gd−3Yb−1.2Zn−0.5Zr (wt%) alloy

    Li, B., Guan, K., Yang, Q., Niu, X., Zhang, D., Lv, S., Meng, F., Huang, Y., Hort, N. & Meng, J., 05.03.2019, In: Journal of Alloys and Compounds. 776, p. 666-678 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  96. Mechanical and Corrosion Properties of Two Precipitation-Hardened Mg-Y-Nd-Gd-Dy Alloys with Small Changes in Chemical Composition

    Maier, P., Lauth, N., Mendis, C. L., Bechly, M. & Hort, N., 15.04.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 4, p. 1426-1435 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  97. Effects of samarium content on microstructure and mechanical properties of Mg–0.5Zn–0.5Zr alloy

    Guan, K., Meng, F., Qin, P., Yang, Q., Zhang, D., Li, B., Sun, W., Lv, S., Huang, Y., Hort, N. & Meng, J., 07.2019, In: Journal of Materials Science and Technology. 35, 7, p. 1368-1377 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  98. Microscopic deformation compatibility during biaxial tension in AZ31 Mg alloy rolled sheet at room temperature

    Xia, D., Huang, G., Liu, S., Tang, A., Gavras, S., Huang, Y., Hort, N., Jiang, B. & Pan, F., 22.05.2019, In: Materials Science and Engineering A. 756, p. 1-10 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  99. Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling

    Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Dharmendra, C. & Hort, N., 2019, Magnesium Technology 2019. Neelameggham, N. R., Joshi, V. V., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 313-318 6 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  100. Microstructures, Corrosion and Mechanical Properties of Mg–Si Alloys as Biodegradable Implant Materials

    Wang, W., Gao, M., Huang, Y., Tan, L., Yang, K. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 151-157 7 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next

Recently viewed