1. //
  2. Start
  3. //
  4. Publications
  5. //
  6. Browse
  7. //

Browse by research area

701 - 800 out of 1,645Page size: 100

  1. Magnesium melt protection

    Hort, N., Wiese, B., Dieringa, H. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 78-81 4 p. (Materials Science Forum; vol. 828-829).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  2. Mechanical and corrosive properties of two magnesium wires: Mg4Gd and Mg6Ag

    Maier, P., Szakács, G., Wala, M. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 393-398 6 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  3. Published

    Mechanical characterisation and modelling of electrospun materials for biomedical applications

    Polak, K., Georgiadis, A. & Heikkila, P., 2015, 2015 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2015 - Proceedings. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 507-511 5 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  4. Microstructure and properties of magnesium alloy Mg-1Zn-1Ca (Zx11)

    Katsarou, L., Suresh, K., Rao, K. P., Hort, N., Blawert, C., Mendis, C. L. & Dieringa, H., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 419-423 5 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  5. Powder metallurgical synthesis of biodegradable mg-hydroxyapatite composites for biomedical applications

    Stüpp, C. A., Mendis, C. L., Mohedano, M., Szakács, G., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, M. C. & Hort, N., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 165-171 7 p. (Materials Science Forum; vol. 828-829).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  6. Powder metallurgical synthesis of biodegradable Mg-Hydroxyapatite composites for biomedical applications

    Stüpp, C. A., Szakács, G., Mendis, C. L., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, M. C. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 425-429 5 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  7. Simulationsbasierte Optimierung der Reihenfolgeplanung am Beispiel eines Liniensorters in der Automobilindustrie

    Heger, J. & Hildebrandt, T., 2015, Simulation in Production and Logistics 2015. Rabe, M. & Clausen, U. (eds.). Stuttgart: Fraunhofer Verlag, p. 11-20 10 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  8. Published

    Speichersimulation der regionalen Speicherkomponente unter Zuhilfenahme eines künstlichen Lastprofiles

    Plenz, M., 2015, Pumpspeicher an Bundeswasserstraßen: Technische, wirtschaftliche und rechtliche Rahmenbedingungen am Beispiel des Elbe-Seitenkanals. Degenhart, H., Schomerus, T. & Schulz, D. (eds.). Wiesbaden: Springer Fachmedien, p. 97-100 4 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  9. Published

    Technische Grundlagen und Umsetzungsvarianten eines Pumpspeichers am Elbe-Seitenkanal

    Plenz, M., Mattner, S., Koch, R., Weiß, T. & Schulz, D., 2015, Pumpspeicher an Bundeswasserstraßen: Technische, wirtschaftliche und rechtliche Rahmenbedingungen am Beispiel des Elbe-Seitenkanals. Degenhart, H., Schomerus, T. & Schulz, D. (eds.). Wiesbaden: Springer Vieweg, p. 7-40 34 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  10. Twinning assisted crack propagation of magnesium-rare earth casting and wrought alloys under bending

    Maier, P., Mendis, C., Wolff, M., Müller, S. & Hort, N., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 311-317 7 p. (Materials Science Forum; vol. 828-829).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  11. Twin-roll casting after intensive melt shearing and subsequent rolling of an am30 magnesium alloy with addition of cao and sic

    Dieringa, H., Das, S., Eskin, D., Fan, Z. Y., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 35-40 6 p. (Materials Science Forum; vol. 828-829).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  12. Published

    Umbau des Energiesystems, virtuelle Kraftwerke und Kanalpumpspeicher

    Plenz, M., Holstenkamp, L. & Grumm, F., 2015, Pumpspeicher an Bundeswasserstraßen: Technische, wirtschaftliche und rechtliche Rahmenbedingungen am Beispiel des Elbe-Seitenkanals. Degenhart, H., Schomerus, T. & Schulz, D. (eds.). Wiesbaden: Springer Fachmedien, p. 1-6 6 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  13. Umformen faserverstärkter thermoplastischer Kunststoff-Halbzeuge mit metallischen Deckblechen für den Leichtbau

    Tekkaya, A. E., Hahn, M., Hiegemann, L. & Ben Khalifa, N., 2015, Intermezzo der hybriden Werkstofflösungen - Hat Blech eine Zukunft?, : Tagungsband des 35. EFB-Kolloquiums Blechverarbeitung 2015 am 24. und 25. März 2015 in Bad Boll . Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, p. 185-199 15 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  14. Published

    Using a decoupling technique to identify the magnetic flux in a permanent magnet synchronous motor

    Mercorelli, P., 2015, In: International Journal of Circuits, Systems and Signal Processing. 9, p. 1-8 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  15. Published

    Using a Seminorm for Wavelet Denoising of sEMG Signals for Monitoring during Rehabilitation with Embedded Orthosis System

    Schimmack, M., Hand, A., Mercorelli, P. & Georgiadis, A., 2015, 2015 IEEE International Symposium on Medical Measurements and Applications (MeMeA). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 467-472 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  16. Zentrale Faktoren in der regionalen Standortplanung: Ergebnisse einer Unternehmensbefragung in der Metropolregion Hannover-Braunschweig-Göttingen-Wolfsburg

    Richter, L., Schmidt, M. & Nyhuis, P., 2015, In: Industrie 4.0 Management. 31, 5, p. 53-56 4 p.

    Research output: Journal contributions › Journal articles › Research

  17. An analytical approach to evaluating nonmonotonic functions of fuzzy numbers

    Seibel, A. & Schlattmann, J., 01.01.2015, In: Advances in Fuzzy Systems. 2015, 7 p., 898651.

    Research output: Journal contributions › Journal articles › Research › peer-review

  18. Published

    A robust adaptive self-tuning sliding mode control for a hybrid actuator in camless internal combustion engines

    Haus, B., Mercorelli, P. & Werner, N., 01.01.2015, Advances and Applications in Sliding Mode Control systems. Azar, A. T. & Zhu, Q. (eds.). Cham: Springer International Publishing AG, p. 107-136 30 p. (Studies in Computational Intelligence; vol. 576).

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  19. Chip extrusion with integrated equal channel angular pressing

    Haase, M. & Ben Khalifa, N., 01.01.2015, 60 Excellent Inventions in Metal Forming. Tekkaya, A. E., Homberg, W. & Brosius, A. (eds.). Heidelberg: Springer, p. 261-266 6 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  20. Comparative study of microstructure and texture of cast and homogenized TX32 magnesium alloy after hot deformation

    Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 01.01.2015, In: Metals and Materials International. 21, 1, p. 134-146 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  21. Introduction

    Tekkaya, A. E., Ben Khalifa, N., Hölker, R. & Hiegemann, L., 01.01.2015, 60 Excellent Inventions in Metal Forming. Tekkaya, A. E., Homberg, W. & Brosius, A. (eds.). Berlin, Heidelberg: Springer Vieweg, p. vii-ix 3 p.

    Research output: Contributions to collected editions/works › Other › Research

  22. CaO dissolution during melting and solidification of a Mg-10 wt.% CaO alloy detected with in situ synchrotron radiation diffraction

    Wiese, B., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Reichel, H. P., Brückner, R., Kainer, K. U. & Hort, N., 05.01.2015, In: Journal of Alloys and Compounds. 618, p. 64-66 3 p.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  23. Fabrication of a high strength Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy by thermomechanical treatments

    Yu, Z., Huang, Y., Qiu, X., Wang, G., Meng, F., Hort, N. & Meng, J., 12.01.2015, In: Materials Science and Engineering A. 622, p. 121-130 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  24. Characterization of the microstructure evolution in IF-Steel and AA6016 during plane-strain tension and simple shear

    Gerstein, G., Klusemann, B., Bargmann, S. & Schaper, M., 15.01.2015, In: Materials. 8, 1, p. 285-301 17 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  25. Published

    A review on the use of calcium chloride in applied thermal engineering

    N'Tsoukpoe, K. E., Rammelberg, H., Fopah Lele, A., Korhammer, K., Watts, B. A., Schmidt, T. & Ruck, W., 22.01.2015, In: Applied Thermal Engineering. 75, p. 513-531 19 p.

    Research output: Journal contributions › Scientific review articles › Research

  26. Published

    Comparing data scaling based recursive least squares algorithms with Kalman Filter for nano parameters identification

    Schimmack, M., Mercorelli, P. & Georgiadis, A., 23.01.2015, Proceedings of 2014 International Conference on Modelling, Identification and Control, ICMIC 2014: ICMIC 2014 Melbourne, Australia December 3rd - 5th , 2014; Proceedings . IEEE - Institute of Electrical and Electronics Engineers Inc., p. 316 - 321 6 p. 7020772. (Proceedings of 2014 International Conference on Modelling, Identification and Control, ICMIC 2014).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  27. Published

    Modelling of a servo piezo mechanical hydraulic actuator and its feed-forward control

    Haus, B., Mercorelli, P. & Werner, N., 23.01.2015, Proceedings of 2014 International Conference on Modelling, Identification and Control, ICMIC 2014: ICMIC 2014 Melbourne, Australia December 3rd - 5th, 2014. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 117 - 122 6 p. 7020738. (Proceedings of 2014 International Conference on Modelling, Identification and Control, ICMIC 2014).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  28. Microstructural evolution and mechanical properties of Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr alloy prepared via pre-ageing and hot extrusion

    Yu, Z., Huang, Y., Mendis, C. L., Hort, N. & Meng, J., 29.01.2015, In: Materials Science and Engineering A. 624, p. 23-31 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  29. Published

    Mathematical Modelling of molecular adsorption in zeolite coated frequency domain sensors

    Murrieta-Rico, F. N., Mercorelli, P., Sergiyenko, O. Y., Petranovskii, V., Hernandez-Balbuena, D. & Tyrsa, V., 01.02.2015, In: IFAC-PapersOnLine. 48, 1, p. 41-46 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  30. Published

    Some model properties to control a permanent magnet machine using a controlled invariant subspace

    Mercorelli, P., Sergiyenko, O., Hernandez-Balbuena, D., Rodriguez-Quiñonez, J., Flores-Fuentes, W. & Basaca-Preciado, L., 01.02.2015, In: IFAC-PapersOnLine. 48, 1, p. 366-371 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  31. The plastic yield and flow behavior in metallic glasses

    Thamburaja, P., Klusemann, B., Adibi, S. & Bargmann, S., 02.02.2015, In: Applied Physics Letters. 106, 5, 051903.

    Research output: Journal contributions › Journal articles › Research › peer-review

  32. Published

    A new didactic approach in Engineering Education for conceptual understanding of Euler's Formula

    Block, B-M. & Mercorelli, P., 17.02.2015, 2014 Frontiers in Education Conference: October 22-25, 2014; Opening innovations and Internationalization in engineering education ; Proceedings. February ed. IEEE - Institute of Electrical and Electronics Engineers Inc., Vol. 2015-February. p. 3040-3047 7 p. (Proceedings - Frontiers in Education Conference, FIE).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  33. Dispatching rule selection with Gaussian processes

    Heger, J., Hildebrandt, T. & Scholz-Reiter, B., 03.2015, In: Central European Journal of Operations Research. 23, 1, p. 235-249 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  34. Prediction of roughness after ball burnishing of thermally coated surfaces

    Hiegemann, L., Weddeling, C., Ben Khalifa, N. & Tekkaya, A. E., 03.2015, In: Journal of Materials Processing Technology. 217, p. 193-201 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  35. Cytotoxicity of the ga-containing coatings on biodegradable magnesium alloys

    Nguyen, A., Kunert, M., Hort, N., Schrader, C., Weisser, J. & Schmidt, J., 01.03.2015, In: Surface Innovations. 3, 1, p. 10-19 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  36. Published

    Digital ultraviolet therapy: A novel therapeutic approach for the targeted treatment of psoriasis vulgaris

    Werfel, T., Holiangu, F., Niemann, K. H., Schmerling, O., Lüllau, F., Zedler, A., Sträter, H. D. & Niebuhr, M., 01.03.2015, In: British Journal of Dermatology. 172, 3, p. 746-753 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  37. Thermomechanical characterization of Portevin-Le Châtelier bands in AlMg3 (AA5754) and modeling based on a modified Estrin-McCormick approach

    Klusemann, B., Fischer, G., Böhlke, T. & Svendsen, B., 04.2015, In: International Journal of Plasticity. 67, p. 192-216 25 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  38. Published

    Conceptual understanding of complex components and Nyquist-Shannon sampling theorem: A design based research in Engineering

    Block, B. M. & Mercorelli, P., 27.04.2015, 2015 IEEE Global Engineering Education Conference (EDUCON). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 462-470 9 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  39. An Investigation on Hot Tearing of Mg-4.5Zn-(0.5Zr) Alloys with Y Additions

    Wang, Z., Song, J., Huang, Y., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.05.2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 5, p. 2108-2118 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  40. Published

    Wavelet based Fault Detection and RLS Parameter Estimation of Conductive Fibers with a Simultaneous Estimation of Time-Varying Disturbance

    Schimmack, M., McGaw, D. & Mercorelli, P., 01.05.2015, In: IFAC-PapersOnLine. 48, 3, p. 1773-1778 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  41. Published

    Numerical investigations of a thermochemical heat storage system during the discharging

    Fopah Lele, A., Hu, J., Kuznik, F., Osterland, T. & Ruck, W., 19.05.2015, ASME-ATI-UIT 2015 Conference on Thermal Energy Systems: Production, Storage, Utilization and the Environment: Heat and Mass transfer in porous media. Napoli: Unione Italiana Termofluidodinamica, 8 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  42. Published

    Development of a temperature controlled weathering test box to evaluate the life cycle behaviour of interior automotive components

    Zindove, T., Van Niekerk, T., Wilm, T. & Mercorelli, P., 01.06.2015, In: IFAC-PapersOnLine. 48, 4, p. 117-122 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  43. Published

    Linux-based Embedded System for Wavelet Denoising and Monitoring of sEMG Signals using an Axiomatic Seminorm

    Schimmack, M. & Mercorelli, P., 01.06.2015, In: IFAC-PapersOnLine. 48, 4, p. 278-283 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  44. Published

    Using haar wavelets for fault detection in technical processes

    Mercorelli, P., 01.06.2015, In: IFAC-PapersOnLine. 48, 4, p. 37-42 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  45. On the Inclusion of Parameter Uncertainties into Engineering Design Computations

    Seibel, A., 06.06.2015, Uelvesbüll: Der Andere Verlag. 92 p. (Konstruktionsmethodik und Produktentwicklung ; vol. 7)

    Research output: Books and anthologies › Monographs › Research › peer-review

  46. Published

    Watermills in the historic irrigation system 'Palmeral de Elche', Spain: An example of early hydropower exploitation

    Melendez-Pastor, I., Pedreño, J. N. & Wittenberg, H., 08.06.2015, In: Water Supply. 15, 5, p. 1140-1151 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  47. A directional modification of the Levkovitch-Svendsen cross-hardening model based on the stress deviator

    Soyarslan, C., Klusemann, B. & Bargmann, S., 07.2015, In: Mechanics of Materials. 86, p. 21-30 10 p., 2391.

    Research output: Journal contributions › Journal articles › Research › peer-review

  48. Mechanical properties and corrosion behavior of Mg-Gd-Ca-Zr alloys for medical applications

    Shi, L. L., Huang, Y., Yang, L., Feyerabend, F., Mendis, C., Willumeit, R., Ulrich Kainer, K. & Hort, N., 01.07.2015, In: Journal of the Mechanical Behavior of Biomedical Materials. 47, p. 38-48 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  49. Acceleration of material-dominated calculations via phase-space simplicial subdivision and interpolation

    Klusemann, B. & Ortiz, M., 27.07.2015, In: International Journal for Numerical Methods in Engineering. 103, 4, p. 256-274 19 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  50. In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40

    Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 29.07.2015, In: Materials Science and Engineering A. 640, p. 129-136 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  51. Verfahren zur Herstellung thermoplastischer Faser-Metall-Laminat-Bauteile mittels Umformverfahren sowie entsprechend hergestellte Faser-Metall-Laminat-Bauteile

    André, K., Ben Khalifa, N., Güner, A., Henning, F., Mennecart, T., Rösner, A. & Tekkaya, A. E., 30.07.2015, IPC No. B32B 15/14 , Deutsches Patent- und Markenamt, Patent No. 10 2014 001 132, 27.01.2014, Priority date 30.07.2015, Priority No. DE102014001132A1

    Research output: Patents › Patent

  52. Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Microstructure, Tensile Properties, and Creep Resistance

    Zhu, S., Easton, M. A., Abbott, T. B., Nie, J. F., Dargusch, M. S., Hort, N. & Gibson, M. A., 25.08.2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 8, p. 3543-3554 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  53. Published

    A Two-Stage Sliding-Mode High-Gain Observer to Reduce Uncertainties and Disturbances Effects for Sensorless Control in Automotive Applications

    Mercorelli, P., 09.2015, In: IEEE Transactions on Industrial Electronics. 62, 9, p. 5929-5940 12 p., 7138581.

    Research output: Journal contributions › Journal articles › Research › peer-review

  54. Published

    Optimization of a gaseous multitube detector for soft X-ray detection

    Oberrath, J., Georgiadis, A. & Dumchev, M., 09.2015, 12th SPARC Workshop and Collaboration Meeting: BOOK of Abstracts. Lüttges, S., Gumberidze, A. & Braeuning-Demian, A. (eds.). Crete: GSI Helmholtzzentrum für Schwerionenforschung, p. 48 1 p.

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

  55. Histological Comparison of New Biodegradable Magnesium-Based Implants for Maxillofacial Applications

    Charyeva, O., Thormann, U., Lips, K. S., Heimann, L., Sommer, U., Szalay, G., Alt, V., Hort, N., Schnettler, R., Rauschmann, M. & Schmidt, S., 01.09.2015, In: Journal of Maxillofacial and Oral Surgery. 14, 3, p. 637-645 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  56. Published

    Identification of conductive fiber parameters with transcutaneous electrical nerve stimulation signal using RLS algorithm

    Schimmack, M. & Mercorelli, P., 01.09.2015, In: IFAC-PapersOnLine. 48, 20, p. 389-394 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  57. Published

    Pressure fault recognition and compensation with an adaptive feedforward regulator in a controlled hybrid actuator within engine applications

    Mercorelli, P., Haus, B. & Werner, N., 01.09.2015, In: IFAC-PapersOnLine. 48, 21, p. 925-930 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  58. Published

    Thermal decomposition kinetic of salt hydrates for heat storage systems

    Fopah Lele, A., Kuznik, F., Rammelberg, H., Osterland, T. & Ruck, W., 15.09.2015, In: Applied Energy. 154, p. 447-458 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  59. Published

    Continuous 3D scanning mode using servomotors instead of stepping motors in dynamic laser triangulation

    Lindner, L., Sergiyenko, O., Rodriguez-Quinonez, J. C., Tyrsa, V., Mercorelli, P., Fuentes, W. F., Murrieta-Rico, F. N. & Nieto-Hipolito, J. I., 28.09.2015, 2015 IEEE 24th International Symposium on Industrial Electronics (ISIE). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 944-949 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  60. Published

    Simulation und Optimierung einer Ink-Jet druckbaren Vivaldi-Antenne für ein UWB-Impulsradar

    Goerke, D., Oberrath, J. & Georgiadis, A., 28.09.2015, Kleinheubacher Tagung 2015: Book of Abstracts. Union Radio-Scientifique Internationale, Landesausschuss in der Bundesrepublik Deutschland e. V, p. 61-62

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

  61. A generalized α-level decomposition concept for numerical fuzzy calculus

    Seibel, A. & Schlattmann, J., 10.2015, Proceedings of the 16th World Congress of the International Fuzzy Systems Association (IFSA) and 9th Conference of the European Society for Fuzzy Logic and Technology (EUSFLAT) 2015. Alonso, J. M., Reformat, M. & Bustince, H. (eds.). Atlantis Press, p. 137-140 4 p. (Advances in Intelligent Systems Research; vol. 89).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  62. Published

    Kinetic Damping in the Spectrum of the Spherical Impedance Probe

    Oberrath, J. & Brinkmann, R. P., 10.2015, In: Bulletin of the American Physical Society. 60, 9, 1 p.

    Research output: Journal contributions › Conference abstract in journal › Research › peer-review

  63. Published

    Spectral Kinetic Simulation of the Ideal Multipole Resonance Probe

    Gong, J., Wilczek, S., Szeremley, D., Oberrath, J., Eremin, D., Dobrygin, W., Schilling, C., Friedrichs, M. & Brinkmann, R. P., 10.2015, In: Bulletin of the American Physical Society. 60, 9, 1 p.

    Research output: Journal contributions › Conference abstract in journal › Research › peer-review

  64. Published

    A geometric approach for the model parameter estimation in a permanent magnet synchronous motor

    Mercorelli, P., 01.10.2015, Computational Problems in Science and Engineering. Mastorakis, N., Bulucea, A. & Tsekouras, G. (eds.). Switzerland: Springer, Vol. 343. p. 425-438 14 p. (Lecture Notes in Electrical Engineering; vol. 343).

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  65. Analytical model to determine the strength of form-fit connection joined by die-less hydroforming

    Weddeling, C., Gies, S., Ben Khalifa, N. & Tekkaya, A. E., 01.10.2015, In: Journal of Manufacturing Science and Engineering. 137, 5, 10 p., 051014.

    Research output: Journal contributions › Journal articles › Research › peer-review

  66. Published

    An Optimal and Stabilising PI Controller with an Anti-windup Scheme for a Purification Process of Potable Water

    Mercorelli, P., 01.10.2015, In: IFAC-PapersOnLine. 48, 25, p. 259-264 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  67. High temperature mechanical behavior of an extruded Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy

    Yu, Z., Huang, Y., Dieringa, H., Lakshi Mendis, C., Guan, R., Hort, N. & Meng, J., 01.10.2015, In: Materials Science and Engineering A. 645, p. 213-224 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  68. In situ investigation of microstructure evolution during solidification of Mg10CaxGd (x = 5, 10, 20) alloys

    Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 01.10.2015, In: Acta Physica Polonica A. 128, 4, p. 606-610 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  69. Process limits of extrusion of multimaterial components

    Ben Khalifa, N., Foydl, A., Pietzka, D. & Jager, A., 01.10.2015, In: Journal of Manufacturing Science and Engineering. 137, 5, 9 p., 051001.

    Research output: Journal contributions › Journal articles › Research › peer-review

  70. Published

    Thermal conductivity measurement of thermochemical storage materials

    Fopah Lele, A., N'Tsoukpoe, K. E., Osterland, T., Kuznik, F. & Ruck, W., 05.10.2015, In: Applied Thermal Engineering. 89, p. 916-926 11 p., 6771.

    Research output: Journal contributions › Journal articles › Research › peer-review

  71. High Strength Magnesium Alloys Through Precipitation Hardening and Micro Alloying: Considerations for Alloy Design

    Mendis, C. L., Kainer, K. U. & Hort, N., 23.10.2015, In: JOM: Journal of The Minerals, Metals & Materials Society. 67, 10, p. 2427-2432 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  72. Published

    Estimation of baseflow and water transfer in karst catchments in Mediterranean Turkey by nonlinear recession analysis

    Eris, E. & Wittenberg, H., 01.11.2015, In: Journal of Hydrology. 530, p. 500-507 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  73. Effect of erbium modification on the microstructure, mechanical and corrosion characteristics of binary Mg-Al alloys

    Seetharaman, S., Blawert, C., Ng, B. M., Wong, W. L. E., Goh, C. S., Hort, N. & Gupta, M., 05.11.2015, In: Journal of Alloys and Compounds. 648, p. 759-770 12 p., 34680.

    Research output: Journal contributions › Journal articles › Research › peer-review

  74. New prototype of the two-legged robot centaurob

    Du, S., Schlattmann, J., Schulz, S. & Seibel, A., 13.11.2015, ASME 2015 International Mechanical Engineering Congress and Exposition : Volum 11: Systems, Design, and Complexity. The American Society of Mechanical Engineers(ASME), 8 p. V011T14A041. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 11-2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  75. Published

    Mirrored piezo servo hydraulic actuators for use in camless combustion engines and its Control with mirrored inputs and MPC

    Haus, B., Mercorelli, P. & Werner, N., 16.11.2015, 2015 European Control Conference, ECC 2015. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1686 - 1692 7 p. 7330780. (2015 European Control Conference, ECC 2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  76. Published

    A Decoupled MPC for Motion Control in Robotino Using a Geometric Approach

    Straßberger, D., Mercorelli, P. & Sergiyenko, O. Y., 19.11.2015, In: Journal of Physics: Conference Series. 659, 1, 10 p., 012029.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  77. Published

    A Geometric Approach to Decouple Robotino Motions and its Functional Controllability

    Straßberger, D., Mercorelli, P. & Sergiyenko, O. Y., 19.11.2015, In: Journal of Physics: Conference Series. 659, 1, 12 p., 012027.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  78. Published

    Implemented Wavelet Packet Tree based Denoising Algorithm in Bus Signals of a Wearable Sensorarray

    Schimmack, M., Nguyen, S. & Mercorelli, P., 19.11.2015, In: Journal of Physics: Conference Series. 659, 1, 9 p., 012021.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  79. Hot Tearing Susceptibility of Mg-Ca Binary Alloys

    Song, J., Wang, Z., Huang, Y., Srinivasan, A., Beckmann, F., Kainer, K. U. & Hort, N., 12.2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 12, p. 6003-6017 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  80. Published

    Performance analysis of a thermochemical based heat storage as an addition to cogeneration systems

    Fopah Lele, A., Kuznik, F., Opel, O. & Ruck, W. K. L., 01.12.2015, In: Energy Conversion and Management. 106, p. 1327-1344 18 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  81. Comparative study of resonant circuit for power transmission via inductive link

    Bouattour, G., Kallel, B., Sasmal, K., Kanoun, O. & Derbel, N., 04.12.2015, 12th International Multi-Conference on Systems, Signals and Devices, SSD 2015. Institute of Electrical and Electronics Engineers Inc., 7348236. (12th International Multi-Conference on Systems, Signals and Devices, SSD 2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  82. Published

    A luenberger observer for a quasi-static disturbance estimation in linear time invariant systems

    Mercorelli, P., 15.12.2015, In: International Journal of Pure and Applied Mathematics. 105, 3, p. 543-547 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  83. Published

    A lyapunov approach in the derivative approximation using a dynamic system

    Mercorelli, P., 15.12.2015, In: International Journal of Pure and Applied Mathematics. 105, 3, p. 523-528 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  84. Effect of Zn addition on hot tearing behaviour of Mg-0.5Ca-xZn alloys

    Song, J., Wang, Z., Huang, Y., Srinivasan, A., Beckmann, F., Kainer, K. U. & Hort, N., 15.12.2015, In: Materials and Design. 87, p. 157-170 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  85. Published

    Switching cascade controllers combined with a feedforward regulation for an aggregate actuator in automotive applications

    Mercorelli, P., Werner, N., Van Niekerk, T., Behre, L. & Becker, U., 16.12.2015, Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference (PRASA-RobMech), 2015 . p. 239 - 244 6 p. 7359529. (Proceedings of the 2015 Pattern Recognition Association of South Africa and Robotics and Mechatronics International Conference, PRASA-RobMech 2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  86. Entwicklung eines integrativen Logistikmodells für die unternehmensinterne Lieferkette: Verknüpfung der Aufgaben der Produktionsplanung und -steuerung mit logistischen Stell-, Regel- und Zielgrößen

    Schäfers, P. & Schmidt, M., 18.12.2015, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 110, 12, p. 775-778 4 p.

    Research output: Journal contributions › Journal articles › Research

  87. Published

    Active Plasma Resonance Spectroscopy: Evaluation of a fluiddynamic-model of the planar multipole resonance probe using functional analytic methods

    Friedrichs, M., Brinkmann, R. P. & Oberrath, J., 2016, In: Bulletin of the American Physical Society. 61, 9, p. 17 1 p.

    Research output: Journal contributions › Conference abstract in journal › Research › peer-review

  88. Published

    A discrete-time fractional order PI controller for a three phase synchronous motor using an optimal loop shaping approach

    Mercorelli, P., 2016, Theory and Applications of Non-integer Order Systems: 8th Conference on Non-integer Order Calculus and Its Applications, Zakopane, Poland. Babiarz, A., Czornik, A., Klamka, J. & Niezabitowski, M. (eds.). Springer, p. 477-487 11 p. (Lecture Notes in Electrical Engineering; vol. 407).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  89. Published

    An Adaptive Resonance Regulator for an Actuator using Periodic Signals in Camless Engine Systems

    Mercorelli, P. & Werner, N., 2016, In: IFAC-PapersOnLine. 49, 14, p. 176–181 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  90. Published

    Anatomy of Discrete Kalman Filter and Its Implementation for Sensorless Velocity Estimation of Organic Actuator

    Schimmack, M. & Mercorelli, P., 2016, In: IFAC-PapersOnLine. 49, 6, p. 110-114 5 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  91. Published

    Anatomy of Haar Wavelet Filter and Its Implementation for Signal Processing

    Schimmack, M., Nguyen, S. & Mercorelli, P., 2016, In: IFAC-PapersOnLine. 49, 6, p. 99-104 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  92. Published

    An Extended Kalman Filter as an Observer in a Sliding Mode Controller for a Metal-Polymer Composite Actuator

    Schimmack, M. & Mercorelli, P., 2016, Proceedings of the 2nd International Afro-European Conference for Industrial Advancement, AECIA 2015. Abraham, A., Wegrzyn-Wolska, K., Hassanien, A. E., Snasel, V. & Alimi, A. M. (eds.). Springer International Publishing AG, p. 305-314 10 p. (Advances in Intelligent Systems and Computing; vol. 427, no. 1).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  93. Application of neural network for correction of hole drilling plasticity effect when measuring LSP induced residual stresses

    Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 2016, Book of Abstracts of the 6th International Conference on Laser Peening and Related Phenomena (6TH ICLPRP). Polese, C. (ed.). University of the Witwatersrand, p. 15 1 p.

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

  94. Published

    A servo piezo mechanical hydraulic actuator and its control for camless internal combustion engines

    Mercorelli, P. & Werner, N., 2016, In: International Journal of Modelling, Identification and Control. 25, 3, p. 227-238 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  95. Published

    A Sliding Mode Control with a Bang-Bang Observer for Detection of Particle Pollution

    Schimmack, M. & Mercorelli, P., 2016, Variable-Structure Approaches: Analysis, Simulation, Robust Control and Estimation of Uncertain Dynamic Processes. Rauh, A. & Senkel, L. (eds.). Cham: Springer, p. 125-153 29 p. (Mathematical Engineering).

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  96. Published

    A Soft Piezo Mechanical Hydraulic Actuator with its Liquid Stiffness Identification and its Control

    Mercorelli, P., Werner, N. & Behre, L., 2016, In: IFAC-PapersOnLine. 49, 21, p. 367-372 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  97. As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloys

    Szakács, G., Mendis, C. L., Tolnai, D., Vlcek, M., Lukác, F., Stulíková, I., Smola, B., Wolff, M., Schmid-Fetzer, R., Schell, N., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 23-27 5 p. (Magnesium Technology; vol. 2016-January).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  98. Automatic generation and meshing of periodic representative volume elements for matrix-inclusions composites

    Schneider, K., Klusemann, B. & Bargmann, S., 2016, Data-driven modeling and numerical simulation of microstructured materials (GAMM AG DATA): Kick-Off Workshop, 26/27 September 2016, Stuttgart, Germany, Book of Abstracts . GAMM. A. G. (ed.). Universität Stuttgart, p. 8 1 p.

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

  99. Published

    Comparing Two Voltage Observers in a Sensorsystem using Repetitive Control

    Schimmack, M., da Costa, M. L. & Mercorelli, P., 2016, In: IFAC-PapersOnLine. 49, 14, p. 7-11 5 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  100. Database enhanced acceleration method based on multivariate simplicial interpolation for material-dominated calculations

    Klusemann, B. & Herrnring, J., 2016, Data-driven modeling and numerical simulation of microstructured materials: Kick-Off Workshop, 26/27 September 2016, Stuttgart, Germany, Book of abstracts. GAMM. A. G. (ed.). Universität Stuttgart, p. 18 1 p.

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

Previous 1...4 5 6 7 8 9 10 11 ...17 Next