1. //
  2. Start
  3. //
  4. Publications
  5. //
  6. Browse
  7. //

Browse by research area

101 - 200 out of 1,660Page size: 100
  1. Published

    Influencing Parameters in the Deep Drawing of Fiber Metal Laminates with Low Viscous Matrix

    Kruse, M. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 2: ICTP 2023. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer, Vol. 2. p. 124-134 11 p. (Lecture Notes in Mechanical Engineering (LNME)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  2. Published

    Control of Permanent Magnet Synchronous Motors for Track Applications

    Mercorelli, P., 08.2023, In: Electronics (Switzerland). 12, 15, 20 p., 3285.

    Research output: Journal contributions › Scientific review articles › Research

  3. Published

    Metastable–Stable

    Hort, N., 02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 11-13 3 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  4. Genetic Implications of Chemical and Textural Properties of Some Fra Mauro Breccias (Apollo 14)

    Knöll, H-D., Stöffler, D., Bierhaus, E. & Liening, M., 1980, Cosmic Mineralogy: Proceedings of the XI Geneal Meeting of IMA, Nvosibirsk, 4.-10. September 1978. Leningrad: USSR Academy of Science, p. 15-24 10 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  5. Published

    The Use of Genetic Algorithm for PID Controller Auto-Tuning in ARM CORTEX M4 Platform

    Teixeira, D. P., Do Carmo, M. J., Santos, M. F. & Mercorelli, P., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 331-336 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  6. Published

    Design, Modeling and Control of an Over-actuated Hexacopter Tilt-Rotor

    Pimentel, G. O., Dos Santos, M. F., Honorio, L. D. M., Mercorelli, P., Da Silva, M. F. & Moreira, A. P. G. M., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 315-320 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  7. Published

    The Use of Anti-Windup Techniques in Didactic Level Systems: An Interesting Application

    Silva, V. B. E., Arce, B. R., De Souza Vieira, P. A., Dos Santos, M. F., Neto, A. F. S. & Mercorelli, P., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 49-53 5 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  8. Published

    Cascade MIMO P-PID Controllers Applied in an Over-actuated Quadrotor Tilt-Rotor

    Dos Santos, M. F., De Mello Honorio, L., Da Silva, M. F., Silva, W. R., De Magalhaes Lima, J. L. S., Mercorelli, P. & Do Carmo, M. J., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 135-140 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  9. Published

    rSOESGOPE Method Applied to Four-Tank System Modeling

    Dos Santos Neto, A. F., Dos Santos, M. F., De Mello Honorio, L. & Mercorelli, P., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 141-146 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  10. Published

    The Lotka-Volterra Model for Competition Controlled by a Sliding Mode Approach

    Mercorelli, P., Santos, M. F., Carvalho, E. F. V., Santos Neto, A. F. & Fernandes, F. M., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 273-278 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  11. Published

    Case Study: Optimization of PI Controller Gains with Anti-Windup Applied on a Level System

    De Almeida Machareth, G., Dos Santos, M. F., Da Silva, J. L., Franklin, L. R. & Mercorelli, P., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 4-9 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  12. Published

    Modelling and Optimization of Commuter Flows as Queuing System Considering Customer and Environmental Costs: a Case Study

    Hering, L. Z., Mercorelli, P., Dos Santos, M. F. & Fernandes, F. M., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 495-500 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  13. Published

    Refill friction stir spot welding of thermoplastic composites: Case study on Carbon-fiber-reinforced polyphenylene sulfide

    Schäfer, H., Blaga, L. A., Stöver, E. & Klusemann, B., 01.10.2023, In: Thin-Walled Structures. 191, 111037.

    Research output: Journal contributions › Journal articles › Research

  14. Published

    Fast template match algorithm for spatial object detection using a stereo vision system for autonomous navigation

    Real-Moreno, O., Rodríguez-Quiñonez, J. C., Sergiyenko, O., Flores-Fuentes, W., Mercorelli, P., Valdez-Rodríguez, J. A., Trujillo-Hernández, G. & Miranda-Vega, J. E., 01.10.2023, In: Measurement: Journal of the International Measurement Confederation. 220, 113299.

    Research output: Journal contributions › Journal articles › Research › peer-review

  15. Published

    Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 (Scientific Reports, (2023), 13, 1, (10669), 10.1038/s41598-023-37913-4)

    Amavisca, C. V., Bergmann, L., de, C. R., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 1 p., 11959.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  16. Published

    Intelligent Diagnostics of Radial Internal Clearance in Ball Bearings with Machine Learning Methods

    Ambrożkiewicz, B., Syta, A., Georgiadis, A., Gassner, A., Litak, G. & Meier, N., 25.06.2023, In: Sensors. 23, 13, 16 p., 5875.

    Research output: Journal contributions › Journal articles › Research › peer-review

  17. Published

    Identification of Parameters and States in PMSMs

    Mercorelli, P., 11.06.2023, In: Electronics (Switzerland). 12, 12, 15 p., 2625.

    Research output: Journal contributions › Scientific review articles › Research

  18. Published

    Jordan Canonical Form for Solving the Fault Diagnosis and Estimation Problems

    Sergiyenko, O., Zhirabok, A., Mercorelli, P., Zuev, A., Filaretov, V. & Tyrsa, V., 03.06.2023, In: Technologies. 11, 3, 13 p., 72.

    Research output: Journal contributions › Journal articles › Research › peer-review

  19. Published

    Design of an Over-Actuated Hexacopter Tilt-Rotor for Landing and Coupling in Power Transmission Lines

    Leal Lopes, V. M., Honório, L. M., Santos, M. F., Pancoti, A. A. N., Silva, M. F., Diniz, L. F. & Mercorelli, P., 01.06.2023, In: Drones. 7, 6, 26 p., 341.

    Research output: Journal contributions › Journal articles › Research › peer-review

  20. Published

    Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625

    Amavisca, C. V., Bergmann, L., Lessa, C. R. D. L., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 10 p., 10669.

    Research output: Journal contributions › Journal articles › Research › peer-review

  21. Published

    Compressive creep behavior and microstructural evolution of sand-cast and peak-aged Mg–12Gd–0.4Zr alloy at 250 °C

    Shi, H., Huang, Y., Yang, L., Liu, C., Dieringa, H., Lu, C., Xiao, L., Willumeit-Römer, R. & Hort, N., 24.08.2023, In: Materials Science & Engineering A. 882, 145422.

    Research output: Journal contributions › Journal articles › Research

  22. Published

    Simulationsbasierte Untersuchung von Energieflexibilität bei der Optimierung in der Hinterlandentwässerung

    Hempel, M. C. & Heger, J., 01.01.2023, ASIM Workshop 2023: STS/GMMS/EDU : Proceedings Langbeiträge : ASIM Fachgruppenworkshop 2023, STS Simulation Technischer Systeme, GMMS Grundlagen und Methoden in Modellbildung und Simulation, EDU Simulation und Edukation, 6.3.-7.3.2023, Universität Magdeburg. Krull, C., Commerell, W., Durak, U., Körner, A. & Pawletta, T. (eds.). Wien: ARGESIM Verlag , p. 143-149 7 p. (ASIM Mitteilung ; vol. 185)(ARGESIM Report; vol. 21).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  23. Genetic Implications of Chemical and Textural Properties of Some Fra Mauro Breccias (Apollo 14)

    Knöll, H-D. & Stöffler, D., 1978, XI GENERAL MEETING OF INTERNATIONAL MINERALOGICAL ASSOCIATION : Abstracts, Volum III, Nvosibirsk, 4.-10. September 1978. Novosibirsk: USSR Academy of Science, p. 28-29 2 p. III

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

  24. Published

    Optimization Analysis for an Uncovered Wagon Transportation with an Interactive Animated Simulation-Based Platform for Multidisciplinary Learning

    Wohlstein, M. H., Zakharova, E., Block, B. M. & Mercorelli, P., 2023, Proceedings of the 15th International Conference on Computer Supported Education - Volume 2, CSEDU 2023. Jovanovic, J., Chounta, I-A., Uhomoibhi, J. & McLaren, B. (eds.). Science and Technology Publications, Lda (SciTePress), p. 451-457 7 p. (International Conference on Computer Supported Education, CSEDU - Proceedings; vol. 2).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  25. Published

    Remote Labs in Electrical Engineering to address heterogeneous student competencies in undergraduate Engineering Education

    Block, B-M., Haus, B., von Geyso, T. & Steenken, A., 22.05.2023, EDUCON 2023 - IEEE Global Engineering Education Conference, Proceedings: Salmiya, Kuwait, 1-4 May 2023, American University of Kuwait; Conference proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 7 p. (IEEE Global Engineering Education Conference; vol. 2023).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  26. Published

    Process characteristics of constrained friction processing of AM50 magnesium alloy

    de Castro, C. C., Shen, J., Dos Santos, J. F. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 3. p. 1739-1746 8 p. 188. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  27. Published

    Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

    Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  28. Published

    Process simulation of friction extrusion of aluminum alloys

    Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  29. Published

    Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing

    Kallien, Z., Knothe-Horstmann, C. & Klusemann, B., 01.07.2023, In: Additive Manufacturing Letters. 6, 7 p., 100154.

    Research output: Journal contributions › Comments / Debate / Reports › Research

  30. Published

    Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing

    Escobar, J., Gwalani, B., Silverstein, J., Ajantiwalay, T., Roach, C., Bergmann, L., dos Santos, J. F., Maawad, E., Klusemann, B. & Devaraj, A., 01.08.2023, In: Materials Characterization. 202, 112999.

    Research output: Journal contributions › Journal articles › Research

  31. Published

    Permeability and fabric compaction in forming of fiber metal laminates

    Kruse, M., Poppe, C. T., Henning, F. & Ben Khalifa, N., 07.2023, In: Journal of Composite Materials. 57, 16, p. 2593-2608 16 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  32. Published

    Microstructural development of as-cast AM50 during Constrained Friction Processing: grain refinement and influence of process parameters

    de Castro, C. C., Shen, J., dos Santos, J. F. & Klusemann, B., 01.09.2023, In: Journal of Materials Processing Technology. 318, 11 p., 118018.

    Research output: Journal contributions › Journal articles › Research

  33. Published

    ML-basierte Absatzprognose mit Frühindikatoren

    Lopez, D. H., Kramer, K. & Schmidt, M., 16.05.2023, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 118, 5, p. 324-329 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  34. Published

    Circular Supply Chain Management in the Wind Energy Industry - A Systematic Literature Review

    Kramer, K. & Schmidt, M., 26.04.2023, Manufacturing Driving Circular Economy: Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin. Kohl, H., Seliger, G. & Dietrich, F. (eds.). Cham: Springer Schweiz, p. 85-93 9 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  35. Published

    Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring Tests

    Maier, P., Pamidi, E., Clausius, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 73-80 8 p. (The Minerals, Metals & Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  36. Published

    Barrel Finishing of Magnesium Alloys

    Petersen, N., Wiese, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 101-106 6 p. (The Minerals, Metals & Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  37. Published

    Modeling Interactions and Dependencies in Production Planning and Control: An Approach for a Systematic Description

    Mütze, A., Lebbing, S., Hillnhagen, S., Schmidt, M. & Nyhuis, P., 04.03.2023, Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA ’22) . von Leipzig, K., Sacks, N. & Clelland, M. M. (eds.). Cham: Springer Schweiz, p. 31-44 14 p. (Lecture Notes in Production Engineering; vol. Part F1162).

    Research output: Contributions to collected editions/works › Chapter › peer-review

  38. Published

    Analysis of a phase‐field finite element implementation for precipitation

    Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, In: PAMM. 22, 1, 6 p., e202200238.

    Research output: Journal contributions › Conference article in journal › Research

  39. Published

    Modeling of 3D fluid-structure-interaction during in-situ hybridization of double-curved fiber-metal-laminates

    Poppe, C. T., Kruse, M. & Kärger, L., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Krakow: MaterialsResearchForum LLC, p. 219-230 12 p. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  40. Published

    Experimental investigation of the fluid-structure interaction during deep drawing of fiber metal laminates in the in-situ hybridization process

    Kruse, M. & Ben Khalifa, N., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). MaterialsResearchForum LLC, Vol. 28. p. 977-986 10 p. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  41. Published

    Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy

    Li, G., Chen, T., Fu, B., Shen, J., Bergmann, L., Zhou, L., Chen, K., Santos, J. F. D. & Klusemann, B., 01.08.2023, In: Journal of Materials Processing Technology. 317, 117984.

    Research output: Journal contributions › Journal articles › Research

  42. Published

    Friction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint properties

    Rodrigues, C. F., Blaga, L. & Klusemann, B., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 4639-4649 11 p.

    Research output: Journal contributions › Journal articles › Research

  43. Published

    Fatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealant

    Bernardi, M., Suhuddin, U. F. H., Fu, B., Gerber, J. P., Bianchi, M., Ostrovsky, I., Sievers, B., Faes, K., Maawad, E., Lazzeri, L., dos Santos, J. F. & Klusemann, B., 01.07.2023, In: International Journal of Fatigue. 172, 107539.

    Research output: Journal contributions › Journal articles › Research › peer-review

  44. Published

    Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process

    Jin, F., Fu, B., Shen, J., Li, J., Li, W., Santos, J. F. D. & Klusemann, B., 01.06.2023, In: Materials Characterization. 200, 112911.

    Research output: Journal contributions › Journal articles › Research

  45. Published

    Research Perspectives and Innovative Applications for Sustainable Engineering Education

    Block, B. M. & Guerne, M. G., 23.02.2023, Learning in the Age of Digital and Green Transition: Proceedings of the 25th International Conference on Interactive Collaborative Learning (ICL2022). Auer, M. E., Pachatz, W. & Rüütmann, T. (eds.). Cham: Springer, Vol. Volume 2. p. 505-515 11 p. (Lecture Notes in Networks and Systems; vol. 634).

    Research output: Contributions to collected editions/works › Chapter › peer-review

  46. Published

    Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn

    Zhou, S., Tang, A., Liu, T., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R. & Pan, F., 25.06.2023, In: Journal of Alloys and Compounds. 947, 169669.

    Research output: Journal contributions › Journal articles › Research › peer-review

  47. Published

    On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions

    Examilioti, T. N., Li, W., Kashaev, N., Ventzke, V., Klusemann, B., Tiryakioğlu, M. & Alexopoulos, N. D., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 895-908 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  48. Published

    Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing

    Kallien, Z., Roos, A., Knothe-Horstmann, C. & Klusemann, B., 26.04.2023, In: Materials Science & Engineering A. 871, 11 p., 144872.

    Research output: Journal contributions › Journal articles › Research

  49. Published

    FILTEREINRICHTUNG MIT MIKROWELLENRESONATOR

    Schimmack, M., Taute, W. & Höft, M., 04.04.2019, IPC No. B01D46/00 , B01D46/44 , G01N22/00, Europäisches Patentamt, Patent No. WO2019063618A1; DE102017122809B3, 26.09.2018, Priority date 29.09.2017, Priority No. DE102017122809A

    Research output: Patents › Patent

  50. Published

    Robust and Optimal Control Designed for Autonomous Surface Vessel Prototypes

    Dos Santos, M. F., Dos Santos Neto, A. F., De Mello Honorio, L., Da Silva, M. F. & Mercorelli, P., 25.01.2023, In: IEEE Access. 11, p. 9597-9612 16 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  51. Published

    KI-Kanban-Behälter: Mobile, dezentrale Logistikdatenerfassung mittels Edge-ML

    Rokoss, A., Popkes, L., Kramer, K., Green, T. & Schmidt, M., 11.02.2023, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 118, 1-2, p. 59-63 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  52. Published

    Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates

    Kruse, M., Lehmann, J. & Ben Khalifa, N., 01.01.2023, Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Liewald, M., Verl, A., Bauernhansl, T. & Möhring, H-C. (eds.). Cham: Springer, p. 122-130 9 p. (Lecture Notes in Production Engineering; vol. Part F1163).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  53. Published

    Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing

    Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  54. Published

    A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems

    Maier, J. T., Schmidt, M., Galizia, F. G., Bortolini, M. & Ferrari, E., 01.01.2023, Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Scholz, S. G., Howlett, R. J. & Setchi, R. (eds.). Springer Singapur, p. 21-32 12 p. (Smart Innovation, Systems and Technologies; vol. 338).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  55. Published

    Designing Mg alloys with high strength and ductility by reducing the strength difference between the basal and non-basal slips

    Zhou, S., Liu, T., Tang, A., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R. & Pan, F., 01.01.2023, In: Materials and Design. 225, 14 p., 111476.

    Research output: Journal contributions › Journal articles › Research

  56. Published

    Using Decision Trees and Reinforcement Learning for the Dynamic Adjustment of Composite Sequencing Rules in a Flexible Manufacturing System

    Voß, T., Heger, J. & Zein El Abdine, M., 09.2022, In: Simulation Notes Europe. 32, 3, p. 169-175 7 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  57. Analytical and Experimental Performance Analysis of Enhanced Wake-Up Receivers Based on Low-Power Base-Band Amplifiers

    Schott, L., Fromm, R., Bouattour, G., Kanoun, O. & Derbel, F., 10.03.2022, In: Sensors. 22, 6, 24 p., 2169.

    Research output: Journal contributions › Journal articles › Research › peer-review

  58. Vibration Converter with Passive Energy Management for Battery‐Less Wireless Sensor Nodes in Predictive Maintenance

    Bradai, S., Bouattour, G., El Houssaini, D. & Kanoun, O., 08.03.2022, In: Energies. 15, 6, 17 p., 1982.

    Research output: Journal contributions › Journal articles › Research › peer-review

  59. Comparative Study of AC-DC Rectifiers for Vibration Energy Harvesters

    Hamza, K., Bouattour, G., Fakhfakh, A., Derbel, F. & Kanoun, O., 2022, Proceedings - 2022 5th International Conference on Power Electronics and their Applications, ICPEA 2022. Institute of Electrical and Electronics Engineers Inc., (Proceedings - 2022 5th International Conference on Power Electronics and their Applications, ICPEA 2022).

    Research output: Contributions to collected editions/works › Contributions in collection of commentaries › Research

  60. Kompaktes induktives Energieübertragungssystem mit mehreren Spulen und passivem Spitzenspannungsdetektor für drahtlose Sensorknoten

    Bouattour, G., Kallel, B., Viehweger, C. & Kanoun, O., 01.09.2022, In: Technisches Messen. 89, 9, p. 612-624 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  61. A Combination of Energy Harvesting and Wireless Power Transfer for Applications in Harsh Environments

    Hamza, K., Bouattour, G., Trigona, C., Rosa, R. L., Baglio, S., Fakhfakh, A. & Kanoun, O., 06.05.2022, 2022 19th IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2022. Institute of Electrical and Electronics Engineers Inc., p. 864-869 6 p. (IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2022).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  62. Comparative Study of Transmitter and Resonator Coils for Wireless Power Transfer

    Adawy, A., Bouattour, G., Ibbini, M. & Kanoun, O., 2022, 2022 19th IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2022. Institute of Electrical and Electronics Engineers Inc., p. 230-235 6 p. (IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2022; vol. 19).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  63. Recycling-oriented fabrication of soft robots

    Nguyen, A. M. & Seibel, A., 04.04.2022, 2022 IEEE 5th International Conference on Soft Robotics (RoboSoft 2022). Piscataway: Institute of Electrical and Electronics Engineers Inc., p. 571-576 6 p. (IEEE International Conference on Soft Robotics).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  64. Methodology for Integrating Biomimetic Beams in Abstracted Topology Optimization Results

    Röver, T., Lau, R. J., Lange, F., Struve, A., Fuchs, C., Bartsch, K., Seibel, A. & Emmelmann, C., 30.10.2022, Proceedings of ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022): Volume 4: Biomedical and Biotechnology; Design, Systems, and Complexity. New York: The American Society of Mechanical Engineers(ASME), 7 p. IMECE2022-94299, V004T06A012. (Proceedings of ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022); vol. 4).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  65. Published

    ROS and Stereovision Collaborative System

    Alaniz-Plata, R., Sergyienko, O., Flores-Fuentes, W., Tyrsa, V. V., Rodriguez Quinonez, J. C., Sepúlveda-Valdez, C. A., Andrade-Collazo, H., Mercorelli, P. & Lindner, L., 30.10.2022, Optoelectronic Devices in Robotic Systems. Sergiyenko, O. (ed.). Springer Nature Switzerland AG, p. 71-113 43 p.

    Research output: Contributions to collected editions/works › Chapter

  66. Published

    Visual-Inertial Navigation Systems and Technologies

    Valdez-Rodríguez, J. A., Rodríguez-Quiñonez, J. C., Flores-Fuentes, W., Ramírez-Hernández, L. R., Trujillo-Hernández, G., Real-Moreno, O., Castro-Toscano, M. J., Miranda-Vega, J. E. & Mercorelli, P., 30.10.2022, Optoelectronic Devices in Robotic Systems. Sergiyenko, O. (ed.). Springer Nature Switzerland AG, p. 137-166 30 p.

    Research output: Contributions to collected editions/works › Chapter

  67. Published

    An introductional lecture on chaotic systems through Lorenz attractor and forced Lotka Volterra equation for interdisciplinary education

    Kim, G., Block, B-M., Haus, B. & Mercorelli, P., 01.09.2022, SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings.  Jarvinen, H-M., Silvestre, S., Llorens, A. & Nagy, B. V. (eds.). Barcellona: Universitat Politecnica de Catalunya, p. 412-419 8 p. (SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  68. Published

    Analysis of Complexity Reduction in Kalman Filters Through Decoupling Control With Chattered Inputs in PMSM

    Kröger, D., Haus, B. & Mercorelli, P., 2022, 15th European Workshop on Advanced Control and Diagnosis (ACD 2019): Proceedings of the Workshop Held in Bologna, Italy, on November 21–22, 2019. Zattoni, E., Simani, S. & Conte, G. (eds.). Cham, Switzerland: Springer Nature Switzerland AG, p. 815-827 13 p. (Lecture Notes in Control and Information Sciences - Proceedings book series (LNCOINSPRO)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  69. Published

    Controlling a Bank Model Economy by Sliding Mode Control with Help of Kalman Filter

    Samson, H. R., Rech, C., Mercorelli, P. & Benz, K., 01.01.2022, 15th European Workshop on Advanced Control and Diagnosis (ACD 2019) : Proceedings of the Workshop Held in Bologna, Italy, on November 21–22, 2019. Zattoni, E., Simani, S. & Conte, G. (eds.). Cham, Switzerland: Springer Nature Switzerland AG, p. 995-1006 12 p. (Lecture Notes in Control and Information Sciences - Proceedings book series (LNCOINSPRO)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  70. Published

    Sustainable engineering education in research and practice

    Block, B-M. & Guerne, M. G., 01.09.2022, SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings. Jarvinen, H-M., Silvestre, S., Llorens, A. & Nagy, B. V. (eds.). Universitat Politecnica de Catalunya, p. 122-130 9 p. (SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  71. Published

    An introduction to sliding mode control for interdisciplinary education

    Block, B-M., Haus, B., Schitz, P., Dethmann, J., Rossum, F. M. V. & Mercorelli, P., 01.09.2022, SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings. Jarvinen, H-M., Silvestre, S., Llorens, A. & Nagy, B. V. (eds.). Universitat Politecnica de Catalunya, p. 131-139 9 p. (SEFI 2022 - 50th Annual Conference of the European Society for Engineering Education, Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  72. Published

    Numerical investigation of laser beam-welded AA2198 joints under different artificial ageing conditions

    Examilioti, T., Germanou, A., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.01.2022, In: Procedia Structural Integrity. 42, p. 244-250 7 p.

    Research output: Journal contributions › Conference article in journal › Research

  73. Published

    A short review on diffusion coefficients in magnesium alloys and related applications

    Shi, H., Huang, Y., Luo, Q., Gavras, S., Willumeit-Römer, R. & Hort, N., 01.12.2022, In: Journal of Magnesium and Alloys. 10, 12, p. 3289-3305 17 p.

    Research output: Journal contributions › Scientific review articles › Research

  74. Published

    A Quadrant Approach of Camera Calibration Method for Depth Estimation Using a Stereo Vision System

    Real-Moreno, O., Rodriguez-Quinonez, J. C., Sergiyenko, O., Flores-Fuentes, W., Castro-Toscano, M. J., Miranda-Vega, J. E., Mercorelli, P., Valdez-Rodriguez, J. A., Trujillo-Hernandez, G. & Sanchez-Castro, J. J., 17.10.2022, IECON 2022 - 48th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  75. Published

    Analysis of the construction of an autonomous robot to improve its energy efficiency when traveling through irregular terrain

    Santos-Sanchez, J. O., Rojas-Casas, M. A., Sergiyenko, O., Rodriguez-Quinonez, J. C., Flores-Fuentes, W., Sepulveda-Valdez, C., Alaniz-Plata, R., Tyrsa, V. & Mercorelli, P., 09.12.2022, IECON 2022 - 48th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  76. Published

    Robust Control as a Mathematical Paradigm for Innovative Engineering Applications

    Mercorelli, P., 01.12.2022, In: Mathematics. 10, 23, 4 p., 4399.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  77. Published

    Effect of Thermal Expansion on the Dynamics of Rolling-element Bearing

    Ambrozkiewicz, B., Gassner, A., Meier, N., Litak, G. & Georgiadis, A., 22.09.2022, In: Procedia CIRP. 112, p. 151-155 5 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  78. Published

    Parameters Estimation of a Lotka-Volterra Model in an Application for Market Graphics Processing Units

    Normatov, D. & Mercorelli, P., 26.09.2022, Proceedings of the 17th Conference on Computer Science and Intelligence Systems. Ganzha, M., Maciaszek, L., Paprzycki, M. & Slezak, D. (eds.). Warsaw: Polish Information Processing Society, p. 935-938 4 p. (Annals of Computer Science and Information System; vol. 30).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  79. Published

    Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion

    Taghipour, A., Mazaheri, Y., McDavid, J., Sheikhi, S., Braun, M., Shen, J., Klusemann, B. & Ehlers, S., 02.2023, In: Advanced Engineering Materials. 25, 4, 16 p., 2201230.

    Research output: Journal contributions › Journal articles › Research › peer-review

  80. Published

    Property profile development during wire extrusion and wire drawing of magnesium alloys AZ31 and ZX10

    Nienaber, M., Braatz, M., Ben Khalifa, N. & Bohlen, J., 01.12.2022, In: Materials and Design. 224, 13 p., 111355.

    Research output: Journal contributions › Journal articles › Research › peer-review

  81. Published

    Konfiguration der PPS: Der Weg von der Theorie zur Praxis

    Hillnhagen, S., Schulz, J., Mütze, A., Nyhuis, P. & Schmidt, M., 30.11.2022, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 117, 11, p. 728-732 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  82. Published

    PPC Task Plan Sourcing - Synchronization of Procurement and Production. A Model-based Observation

    Hillnhagen, S., Koller, S-H., Mütze, A., Nyhuis, P. D. P. & Schmidt, M., 2022, Conference on Production Systems and Logistics: International Conference, CPSL 2022, hosted at the University of British Columbia in Vancouver, Canada, 17th May 2022 – 20th May 2022, Proceedings. Herberger, D. & Hübner, M. (eds.). Offenburg: publish-Ing., p. 287-296 10 p. (Proceedings of the Conference on Production Systems and Logistics; vol. 3).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  83. Published

    Using a Bivariate Polynomial in an EKF for State and Inductance Estimations in the Presence of Saturation Effects to Adaptively Control a PMSM

    Zwerger, T. & Mercorelli, P., 19.10.2022, In: IEEE Access. 10, p. 111545-111553 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  84. Published

    Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences

    Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, In: Materials Science & Engineering A. 859, 144227.

    Research output: Journal contributions › Journal articles › Research › peer-review

  85. Published

    Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens

    Pöltl, D., Keller, S., Chupakhin, S., Sala, S. T., Kashaev, N. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 2293-2302 10 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  86. Published

    Process Stability and Reproducibility of the Dieless Drawing Process for AZ31 Magnesium Wires

    Braatz, M., Bohlen, J. & Khalifa, N. B., 2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 389-400 12 p. (Key Engineering Materials; vol. 926 ).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  87. Published

    Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN

    Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  88. Published

    Experimental Investigation of Efficiency and Deposit Process Temperature During Multi-Layer Friction Surfacing

    Kallien, Z., Roos, A. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 187-193 7 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  89. Published

    Modelling Interdependencies Within Production Planning and Control: An Application-Motivated Approach

    Mütze, A., Hillnhagen, S., Schmidt, M. & Nyhuis, P., 2022, Advances in Production Management Systems : Smart Manufacturing and Logistics Systems: Turning Ideas into Action; IFIP WG 5.7 International Conference, APMS 2022 Gyeongju, South Korea, September 25–29, 2022 Proceedings, Part I. Kim, D. Y., von Cieminski, G. & Romero, D. (eds.). Cham: Springer Schweiz, p. 518-525 8 p. (IFIP Advances in Information and Communication Technology; vol. 663).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  90. Published

    Comparison of Friction Extrusion Processing from Bulk and Chips of Aluminum-Copper Alloys

    Rath, L., Suhuddin, U. F. H. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 471-480 10 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  91. Published

    Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study

    Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.

    Research output: Journal contributions › Journal articles › Research

  92. Published

    Anatomy of Chua's System - Nonlinear Dynamic Electronics for Chaos in the Lab

    Schimmack, M. & Mercorelli, P., 01.07.2022, In: IFAC-PapersOnLine. 55, 17, p. 302-307 6 p.

    Research output: Journal contributions › Conference article in journal › Research

  93. Published

    Degradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preforms

    Casas-Luna, M., Montufar, E. B., Hort, N., Díaz-de-la-Torre, S., Méndez-García, J. C., Vištejnová, L., Brínek, A., Daňhel, A., Dvořak, K., Kaiser, J. & Čelko, L., 01.12.2022, In: Journal of Magnesium and Alloys. 10, 12, p. 3641-3656 16 p.

    Research output: Journal contributions › Journal articles › Research

  94. Published

    Four Methods to Distinguish between Fractal Dimensions in Time Series through Recurrence Quantification Analysis

    Tomashin, A., Leonardi, G. & Wallot, S., 19.09.2022, In: Entropy. 24, 9, 14 p., 1314.

    Research output: Journal contributions › Journal articles › Research › peer-review

  95. Published

    Experimental and numerical investigation of laser beam-welded Al-Cu-Li joints using micro-mechanical characteristics

    Examilioti, T. N., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.07.2022, In: Journal of Materials Research and Technology. 19, p. 2431-2446 16 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  96. Published

    Towards 3D Process Simulation for In Situ Hybridization of Fiber-Metal-Laminates (FML)

    Poppe, C. T., Werner, H. O., Kruse, M., Chen, H., Ben Khalifa, N., Henning, F. & Kärger, L., 22.07.2022, In: Key Engineering Materials. 926, p. 1399-1412 14 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  97. Published

    Experimental Verification of the Impact of Radial Internal Clearance on a Bearing's Dynamics

    Ambrozkiewicz, B., Syta, A., Georgiadis, A., Gassner, A. & Meier, N., 01.09.2022, In: Sensors. 22, 17, 20 p., 6366.

    Research output: Journal contributions › Journal articles › Research › peer-review

  98. Published

    Model Predictive Control for Energy Optimization in Generators/Motors as Well as Converters and Inverters for Futuristic Integrated Power Networks

    Mercorelli, P., 19.08.2022, In: Energies. 15, 16, 4 p., 6023.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  99. Published

    PI Control Applied to a Small-Scale Thermal System with Heating and Cooling Sources

    Rocha, L. G., Borges, L. D. M., Silva, W. R., Mariquito, K. C. C., Santos, M. F. & Mercorelli, P., 29.05.2022, 2022 23rd International Carpathian Control Conference, ICCC 2022: Palace Hotel Sinaia, Romania; May 29 - June 1, 2022. Popescu, D., Barbulescu, L-F., Popescu, E., Roman, M. & Sendrescu, D. (eds.). Piscataway: Institute of Electrical and Electronics Engineers Inc., p. 1-5 5 p. (International Carpathian Control Conference; no. 23).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  100. Published

    Circular supply chain management for the wind energy industry: Conceptional ideas towards more circularity

    Kramer, K. & Schmidt, M., 14.09.2022, Digitization of the work environment for sustainable production. Plapper, P. (ed.). Berlin: GITO mbH Verlag, p. 61-80 20 p. (Schriftenreihe der Wissenschaftlichen Gesellschaft für Arbeits- und Betriebsorganisation (WGAB) e. V.).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next