1. //
  2. Start
  3. //
  4. Publications
  5. //
  6. Browse
  7. //

Browse by research area

201 - 300 out of 1,645Page size: 100

  1. Hot workability characteristics of cast and homogenized Mg-3Sn-1Ca alloy

    Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 26.05.2008, In: Journal of Materials Processing Technology. 201, 1-3, p. 359-363 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  2. Published

    On the stabilization of parallel-chord girders for timber constructions

    Eilering, S. & Hente, C., 06.2008, In: Bauingenieur. 83, JUNE, p. 288-296 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  3. Progress and challenge for magnesium alloys as biomaterials

    Zeng, R., Dietzel, W., Witte, F., Hort, N. & Blawert, C., 08.2008, In: Advanced Engineering Materials. 10, 8, p. B3-B14 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  4. Evolution of microstructure and hardness of AE42 alloy after heat treatments

    Huang, Y. D., Dieringa, H., Hort, N., Maier, P., Kainer, K. U. & Liu, Y. L., 08.09.2008, In: Journal of Alloys and Compounds. 463, 1-2, p. 238-245 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  5. Friction analyses in twisted and helical profile extrusion of aluminum alloys

    Ben Khalifa, N., Schikorra, M. & Erman Tekkaya, A., 24.09.2008, Metal Forming 2008. The 12th International Conference. : Akademia Gorniczo-Hutnicza Krakow, Poland. September 21.-24. 2008.. Verlag Stahleisen GmbH, p. 102-107 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  6. Degradable biomaterials based on magnesium corrosion

    Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R. & Feyerabend, F., 10.2008, In: Current Opinion in Solid State and Materials Science. 12, 5-6, p. 63-72 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  7. Hot working parameters and mechanisms in as-cast Mg-3Sn-1Ca alloy

    Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 15.10.2008, In: Materials Letters. 62, 26, p. 4207-4209 3 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  8. Integrated simulation method for investment decisions of micro production systems

    Scholz-Reiter, B., Lütjen, M. & Heger, J., 11.2008, In: Microsystem Technologies. 14, 12, p. 2001-2005 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  9. An EKF-based observer for sensorless valve control in camless internal combustion engine

    Doretti, D., Fabbrini, A., Braune, S., Garulli, A. & Mercorelli, P., 01.11.2008, Proceedings - 34th Annual Conference of the IEEE Industrial Electronics Society, IECON 2008. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 85-90 6 p. 4757933. (IEEE Industrial Electronics).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  10. Published

    Zinc and cadmium accumulation in single zebrafish (Danio rerio) embryos - A total reflection X-ray fluorescence spectrometry application

    Mages, M., Bandow, N., Küster, E., Brack, W. & von Tümpling, W., 12.2008, In: Spectrochimica Acta - Part B Atomic Spectroscopy. 63, 12, p. 1443-1449 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  11. Analysis And Comparison Of Dispatching RuleBased Scheduling In Dual-Resource Constrained Shop-Floor Scenarios

    Scholz-Reiter, B., Heger, J. & Hildebrandt, T., 2009, Proceedings of the World Congress on Engineering and Computer Science 2009 Vol II. Ao, S. I., Douglas, C., Grundfest, W. S. & Burgstone, J. (eds.). Newswood Limited, Vol. 2. 7 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  12. Automatische Konsolidierung von Seecontainern: Beschleunigung des Beladevorganges mittels dynamischer Beladungsplanung und automatischer Beladung

    Scholz-Reiter, B., Burwinkel, M., Isenberg, M-A., Heger, J. & Lampe, W., 2009, In: wt Werkstattstechnik online. 99, 3, p. 166-171 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  13. Bauteilgetrieben Montagesteuerung und Fabrikstrukturierung durch Nutzung Gentelligenter Technologie

    Nyhuis, P., Schulze, C. P., Hartmann, W., Schmidt, M. & Herde, F., 2009, In: Industrie Management. 25, 2, p. 13-16 4 p.

    Research output: Journal contributions › Journal articles › Research

  14. Eigenschaften von kaltumgeformten Bauteilen

    Ben Khalifa, N., Meidert, M. & Tekkaya, A. E., 2009, In: Schmiede-Journal. 2009, 1, p. 23-25 3 p.

    Research output: Journal contributions › Journal articles › Research

  15. Elevated temperature and varied load response of AS41 at bolted joint

    Anopuo, O., Shen, G., Xu, S., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Dargusch, M. S. & Keay, S. M. (eds.). Scientific.Net , p. 509-514 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  16. Extrusion Benchmark 2007

    Pietzka, D., Ben Khalifa, N., Donati, L. & Tomesani, L., 2009, NAFEMS Wold Congress: The Analysis Advantage : Perspectives on Engineering Simulation for Today and Beyond. Proceedings. International Association for the Engineering Modelling, Analysis and Simulation Community, 12 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  17. Extrusion Benchmark 2009 – A Step Ahead in Virtual Process Optimization

    Ben Khalifa, N., Tekkaya, A. E., Donati, L. & Tomesani, L., 2009, In: Light Metal Age. 67, 2, p. 54-57 4 p.

    Research output: Journal contributions › Journal articles › Research

  18. Gentelligent Factory Structures and Assembly Control

    Nyhuis, P., Fisser, F. & Schmidt, M., 2009, Innovative production machines and systems: third I*PROMS virtual international conference. Soroka, A. J., Pham, D. T. & Eldukhri, E. E. (eds.). Whittles Publishing, p. 460-465 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  19. Influence of strontium, silicon and calcium additions on the properties of the AM50 alloy

    Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 459-462 4 p. (Materials Science Forum; vol. 618 619).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  20. Inversion of Fuzzy Neural Networks for the Reduction of Noise in the Control Loop for Automotive Applications

    Nentwig, M. & Mercorelli, P., 2009, In: JAMRIS, Journal of Automation, Mobile Robotics & Intelligent Systems. 3, 3, p. 83-89 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  21. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

    Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 105-110 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  22. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

    Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Ulrich Kainer, K., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 105-110 6 p. (TMS Annual Meeting).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  23. Magnesium recycling system prepared by permanent mould- and high pressure die casting

    Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  24. Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processing

    Pinheiro, G., Santos, J. D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 191-196 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  25. Modeling and simulation of the heterogenous material behavior in thermal-sprayed coatings

    Klusemann, B., Hortig, C. & Svendsen, B., 2009, Computational Plasticity X - Fundamentals and Applications: Fundamentals and Applications (CD-ROM). Onate, E., Owen, D. R. J. & Suarez, B. (eds.). International Center for Numerical Methods in Engineering (CIMNE), 2 p. (Computational Plasticity X - Fundamentals and Applications).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  26. Modeling and simulation of the microstructural behaviour in thermal sprayed coatings

    Klusemann, B., Hortig, C. & Svendsen, B., 2009, PAMM 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics . Kalinski, K. J. (ed.). 1 ed. John Wiley & Sons Inc., Vol. 9. p. 421–422 2 p. (PAMM - Proceedings in Applied Mathematics and Mechanics; vol. 9, no. 1).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  27. Modellierung und simulation des heterogenen materialverhaltens in thermisch gespritzten schichten

    Klusemann, B., 2009, SFB708 - 3. öffentliches Kolloquium: Praxiswissen (3D-Surface Engineering für Werkzeugsysteme der Blechformteilefertigung). Tillmann, W. (ed.). Verlag Praxiswissen, Vol. 3. p. 107 – 115 9 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  28. On the influence of settling of (ZrB2)P inoculants on Grain Refinement of Mg-alloys: Experiment and Theoretical Calculation

    Günther, R., Hartig, C., Hort, N. & Bormann, R., 2009, Linking Science and Technology for Global Solution: Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 309-313 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  29. PD/PID-switching control as a human-machine interface for a semi-autonomous driver in automobiles

    Nentwig, M. & Mercorelli, P., 2009, 12th IFAC Symposium on Transpotaton Systems, CT'09 - Final Program. Chassiakos, A. G. (ed.). Elsevier B.V., p. 497-504 8 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 42, no. 15).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  30. Quantitative determination on hot tearing in Mg-Al binary alloys

    Zhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 533-540 8 p. (Materials Science Forum; vol. 618 619).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  31. Published

    Sauberkeit ist messbar: Einfache Sauberkeitskontrolle vor der Beschichtung von Metallteilen

    Lechner, F. & Adami, W., 2009, In: Metalloberfläche. 63, 5, p. 35-36 2 p.

    Research output: Journal contributions › Journal articles › Research

  32. Strangpressen - Innovative Verfahren für Leichtbau und Ressourcenschonung

    Ben Khalifa, N., Becker, D., Pietzka, D. & Tekkaya, A. E., 2009, In: International Aluminium Journal. 85, 1/2, p. 95-100 6 p.

    Research output: Journal contributions › Journal articles › Research

  33. Verbraucherorientierter Servicegrad: Kostenoptimale Kapitalallokation vor dem Hintergrund eines „Verbraucherorientierten Servicegrads“

    Wriggers, F. S., Schmidt, M., Eickemeyer, S. C. & Nyhuis, P., 2009, In: wt Werkstattstechnik online. 99, 4, p. 255-259 5 p.

    Research output: Journal contributions › Journal articles › Research

  34. Wärmebehandlungsstrategie zur Herstellung eigenschaftsgradierter Aluminiumprofile der Legierung EN AW-6082

    Jäger, A., Ben Khalifa, N. & Tekkaya, A. E., 2009, In: International Aluminium Journal. 85, 5, p. 68-72 5 p.

    Research output: Journal contributions › Journal articles › Research

  35. Recycling of magnesium drive train components

    Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 01.2009, In: Science in China, Series E: Technological Sciences. 52, 1, p. 148-154 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  36. Published

    Determination of the construction and the material identity values of outside building components with the help of in-situ measuring procedures and FEM-simulation calculations

    Beißner, E. & Eilering, S., 02.2009, In: Bautechnik. 86, 2, p. 94-98 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  37. Microstructure and corrosion behavior of Mg-Sn-Ca alloys after extrusion

    ABU LEIL, T., HORT, N., DIETZEL, W., BLAWERT, C., HUANG, Y., KAINER, K. U. & RAO, K. P., 02.2009, In: Transactions of Nonferrous Metals Society of China (English Edition). 19, 1, p. 40-44 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  38. Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg-3Sn-1Ca alloy

    Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 25.02.2009, In: Materials Science and Engineering A. 502, 1-2, p. 25-31 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  39. Numerical determination of heat distribution and castability simulations of as cast Mg-Al alloys

    Khan, S. S., Hort, N., Eiken, J., Steinbach, I. & Schmauder, S., 03.2009, In: Advanced Engineering Materials. 11, 3, p. 162-168 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  40. Springback compensation by superposition of stress in air bending

    Weinrich, A., Ben Khalifa, N., Chatti, S., Dirksen, U. & Tekkaya, A. E., 01.03.2009, In: Key Engineering Materials. 410-411, p. 621-628 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  41. Published

    Analysis of nutrition-relevant trace elements in human blood and serum by means of total reflection X-ray fluorescence (TXRF) spectroscopy

    Stosnach, H. & Mages, M., 04.2009, In: Spectrochimica Acta - Part B Atomic Spectroscopy. 64, 4, p. 354-356 3 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  42. Mechanical properties and corrosion performance of AZ-Mg alloy modified with Ca and Sr

    Anopuo, O., Huang, Y., Dieringa, H., Hort, N., Kainer, K. U. & Khan, A. K., 04.2009, In: SAE International Journal of Materials and Manufacturing. 1, 1, p. 103-110 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  43. Published

    Das Verfahren sowie das Mikrosystem für gleichzeitige Messung und Bestimmung von Konzentrationen in 3-Komponentenlösungen

    Georgiadis, A. & Ivanova, T., 02.04.2009, IPC No. G01N 27/22, Deutsches Patent- und Markenamt, Patent No. DE102007045203A1, 21.09.2007

    Research output: Patents › Patent

  44. Published

    Product Variety: An Auto Industry Analysis and a Benchmarking Study

    Scavarda, L. F., Schaffer, J., Scavarda, A. J., da Cunha Reis, A. & Schleich, H-H., 29.05.2009, In: Benchmarking: An International Journal. 16, 3, p. 387 - 400 14 p.

    Research output: Journal contributions › Journal articles › Research

  45. New incremental methods for springback compensation by stress superposition

    Kleiner, M., Tekkaya, A. E., Chatti, S., Hermes, M., Weinrich, A., Ben-Khalifa, N. & Dirksen, U., 06.2009, In: Production Engineering. 3, 2, p. 137-144 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  46. Experimental and theoretical investigation of the microstructural evolution in aluminium alloys during extrusion

    Kayser, T., Parvizian, F., Klusemann, B. & Svendsen, B., 10.06.2009, Materials Characterisation IV: Computational Methods and Experiments. Mammoli, A. A. & Brebbia, C. A. (eds.). Southampton: WIT Press, p. 209–216 8 p. (WIT Transactions on Engineering Sciences; vol. 64).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  47. Investigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42

    Dieringa, H., Hort, N. & Kainer, K. U., 15.06.2009, In: Materials Science and Engineering A. 510-511, C, p. 382-386 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  48. Magnesium recycling: State-of-the-Art developments, part I

    Fechner, D., Hort, N., Blawert, C., Dietzel, W. & Kainer, K. U., 07.2009, In: Light Metal Age. 67, 4, p. 42-46 5 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  49. Hot tearing behaviour of binary Mg-1Al alloy using a contraction force measuring method

    Zhen, Z. S., Hort, N., Huang, Y. D., Utke, O., Petri, N. & Kainer, K. U., 08.2009, In: International Journal of Cast Metals Research. 22, 1-4, p. 331-334 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  50. Innovation by forming technology: Motivation for research

    Brosius, A., Hermes, M., Ben Khalifa, N., Trompeter, M. & Tekkaya, A. E., 01.08.2009, In: International Journal of Material Forming. 2, SUPPL. 1, p. 29-38 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  51. Magnesium recycling: State-of-the-Art developments, part II

    Fechner, D., Hort, N., Blawert, C., Dietzel, W. & Kainer, K. U., 09.2009, In: Light Metal Age. 67, 5, p. 34-36 3 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  52. Efficient supplies to assembly areas from storage stages

    Schmidt, M., Eickemeyer, S. C. & Nyhuis, P., 11.2009, In: World Academy of Science, Engineering and Technology. 59, p. 303-307 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  53. New incremental methods for springback compensation by stress superposition

    Chatti, S., Hermes, M., Weinrich, A., Ben-Khalifa, N. & Tekkaya, A. E., 12.2009, In: International Journal of Material Forming. 2, SUPPL. 1, p. 817-820 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  54. Robust feedback linearization using an adaptive PD regulator for a sensorless control of a throttle valve

    Mercorelli, P., 01.12.2009, In: Mechatronics. 19, 8, p. 1334-1345 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  55. Accurate welding line prediction in extrusion processes

    Kloppenborg, T., Ben Khalifa, N. & Tekkaya, A. E., 2010, Advances on hot extrusion and simulation of light alloys: selected, peer reviewed papers from the International Conference on Extrusion and Benchmark (ICEB). Tekkaya, A. E. & Ben Khalifa, N. (eds.). Trans Tech Publications, Vol. 424. p. 87-95 9 p. (Key Engineering Materials; vol. 424).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  56. Published

    Aesthetic Design of Masonry Arch Bridges

    Ohler, A. & Kirschner, U., 2010, Proceedings of the Eight International Masonry Conference 2010. Jäger, W., Haseltine, B. & Fried, A. (eds.). The Masonry Society, p. 383-392 9 p. (Masonry : Proceedings of the British Masonry Society; vol. 11).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  57. Aluminium-rich coring structures in Mg-Al alloys with carbon inoculation

    Huang, Y., Zheng, X., Okechukwu, A., Kim, G. S., Kainer, K. U. & Hort, N., 2010, PRICM7. Nie, J-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 675-678 4 p. (Materials Science Forum; vol. 654-656).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  58. Analysis of priority rule-based scheduling in dual-resource-constrained shop-floor scenarios

    Scholz-Reiter, B., Heger, J. & Hildebrandt, T., 2010, Machine Learning and Systems Engineering. Ao, S., Rieger, B. & Amouzegar, M. A. (eds.). Springer Netherlands, Vol. 68 LNEE. p. 269-281 13 p. (Lecture Notes in Electrical Engineering; vol. 68 LNEE).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  59. An assessment of the grain structure evolution during hot forward extrusion of aluminum alloy 7020

    Foydl, A., Ben Khalifa, N., Brosius, A. & Tekkaya, A. E., 2010, Advances on hot extrusion and simulation of light alloys: selected, peer reviewed papers from the International Conference on Extrusion and Benchmark (ICEB). Tekkaya, A. E. & Ben Khalifa, N. (eds.). Trans Tech Publications, Vol. 424. p. 35-41 7 p. (Key Engineering Materials; vol. 424).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  60. An observer for sensorless variable valve control in camless internal combustion engines

    Mercorelli, P., 2010, 6th IFAC Symposium Advances in Automotive Control, AAC 2010. Trächtler, A. & Abel, D. (eds.). International Federation of Automatic Control, p. 306-311 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 43, no. 7).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  61. Application of crystal plasticity to modeling the deformation behavior of sheet metal mesocrystals

    Klusemann, B., Svendsen, B. & Vehoff, H., 2010, Fifth International Conference Multiscale Materials Modeling - MMM 2010: Proceedings : October 4-8, 2010, Freiburg, Germany. Fraunhofer Verlag, Vol. 5. p. 447 – 450 4 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  62. Approaching bolt load retention behaviour of AS41 through compliance and creep deformation

    Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 215-220 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  63. Arc spraying of WCFeCSiMn cored wires. Part 2: E-Module measurement and simulation

    Nebel, J., Klusemann, B., Tillmann, W. & Svendsen, B., 2010, Thermal Spray 2010: Global Solutions for Future Applications: Proceedings of the International Thermal Spray Conference. Marple, B. R., Agarwal, A., Hyland, M. M., Li, Y-C., Lima, R. S. & Montavon, G. (eds.). New York: Springer, p. 782–789 18 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  64. Published

    Bildung für nachhaltige Entwicklung: Projektmentoring als innovatives Lehr-Lernkonzept in den Ingenieurwissenschaften

    Block, B-M., 2010, IngenieurBildung für nachhaltige Eintwicklung. Kammasch, G., Wieneke-Toutaoui, A. & Schwenk, B. (eds.). Beuth Verlag, p. 45-50 7 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  65. Composite extrusion and threading of continuously reinforced aluminium profiles

    Engbert, T., Biermann, D., Zabel, A., Pietzka, D., Tekkaya, A. E. & Ben Khalifa, N., 2010, In: International Aluminium Journal. 86, 4, p. 36-41 6 p.

    Research output: Journal contributions › Journal articles › Research

  66. Development of recyclable Mg-based alloys: Az91d and Azc1231 phase information derived from heating/cooling curve analysis

    Gesing, A. J., Reade, N. D., Sokolowski, J. H., Blawert, C., Fechner, D. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 97-105 9 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  67. Effect of minor additions of Al and Si on the mechanical properties of cast Mg-3Sn-2Ca alloys in low temperature range

    Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 2010, PRICM7. Nie, J-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 635-638 4 p. (Materials Science Forum; vol. 654-656).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  68. Extrusion benchmark 2009 experimental analysis of deflection in extrusion dies

    Pietzka, D., Ben Khalifa, N., Lorenzo, D., Tomesani, L. & Tekkaya, A. E., 2010, Advances on hot extrusion and simulation of light alloys: selected, peer reviewed papers from the International Conference on Extrusion and Benchmark (ICEB). Tekkaya, A. E. & Ben Khalifa, N. (eds.). Trans Tech Publications, Vol. 424. p. 19-26 8 p. (Key Engineering Materials; vol. 424).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  69. Friction model selection in FEM simulations of aluminium extrusion

    Donati, L., Tomesani, L., Schikorra, M., Ben Khalifa, N. & Tekkaya, A. E., 2010, In: International Journal of Surface Science and Engineering. 4, 1, p. 27-41 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  70. Gaussian processes for dispatching rule selection in production scheduling: Comparison of learning techniques

    Scholz-Reiter, B., Heger, J. & Hildebrandt, T., 2010, Proceedings - IEEE International Conference on Data Mining, ICDM. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 631-638 8 p. (IEEE International Conference on Data Mining Workshops).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  71. Generating dispatching rules for semiconductor manufacturing to minimize weighted tardiness

    Pickardt, C., Branke, J., Hildebrandt, T., Heger, J. & Scholz-Reiter, B., 2010, Proceedings - Winter Simulation Conference. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 2504-2515 12 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  72. Geometric structures for the parameterization of non-interacting dynamics for multi-body mechanisms

    Mercorelli, P., 2010, In: International Journal of Pure and Applied Mathematics. 59, 3, p. 257-273 17 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  73. Grain refinement of Mg-Al alloys by carbon inoculation

    Huang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K. U. & Kim, G. S., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 419-424 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  74. High temperature deformation mechanisms and processing map for hot working of cast-homogenized Mg-3Sn-2Ca alloy

    Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2010, THERMEC 2009. Chandra, T., Wanderka, N., Reimers, W. & Ionescu, M. (eds.). Trans Tech Publications Ltd, p. 3616-3621 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  75. Homogenization methods for multi-phase elastic composites: Comparisons and Benchmarks

    Svendsen, B. & Klusemann, B., 2010, In: Technische Mechanik. 30, 4, p. 374-386 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  76. Influence of cerium on stress corrosion cracking in AZ91D

    Heilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 305-309 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  77. Investigation and modeling of the material behavior due to evolving dislocation microstructures in fcc and bcc metals

    Clausmeyer, T., Klusemann, B., Bargmann, S. & Svendsen, B., 2010, Proceedings of the Fifth International Conference Multiscale Materials Modeling MMM2010: Conference Proceedings. Gumbsch, P. & van der Giessen, E. (eds.). Fraunhofer Verlag, p. 384 – 387 4 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  78. Investigations on microstructure and properties of Mg-Sn-Ca alloys with 3% Al additions

    Elsayed, F. R., Leil, T. A., El-Aziz, A. A., Kainer, K. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  79. Materialklassifizierung unter Einbeziehung von Bedarfsprognosen

    Scholz-Reiter, B., Heger, J., Meinecke, C. & Bergmann, J., 2010, In: Productivity Management. 15, 1, p. 57-60 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  80. Median Based Algorithm as an Entropy Function for Noise Detection in Wavelet Trees for Data Reconciliation

    Mercorelli, P., 2010, In: International Journal of Mathematics, Game Theory and Algebra. 19, 5-6, p. 319-333 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  81. Microstructure and corrosion of AZ91 with small amounts of cerium

    Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Grbbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 187-191 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  82. Modellierung logistischer Prozesse der Montage

    Schmidt, M., 2010, Garbsen: PZH Verlag. 146 p. (Berichte aus dem IFA; vol. 1/2011)

    Research output: Books and anthologies › Monographs › Research

  83. Modellierung und simulation des material- und mikrostrukturverhaltens thermisch gespritzter schichten

    Klusemann, B. & Svendsen, B., 2010, 3D-Surface Engineering für Werkzeug- systeme der Blechformteilefertigung - Erzeugung, Modellierung, Bearbeitung.: SFB708 - Berichtsband 2007-2010. Tillmann, W. & Nebel, J. (eds.). Verlag Praxiswissen, p. 163–178 163 p. (Sonderforschungsbereich SFB 708).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  84. Multiscale material modeling

    Palnau, V., Hortig, C., Klusemann, B., Bartel, T., Svendsen, B. & Menzel, A., 2010, 1st International Conference on Product Property Prediction. Biermann, D., Tekkaya, A. E. & Tillmann, W. (eds.). Dortmund: Technische Universität Dortmund, p. 45-57 13 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  85. Neuere Entwicklungen zur Herstellung von Schraubenrotoren mittels innovativer Umformverfahren

    Ben Khalifa, N., Tekkaya, A. E., Hauser, J. & Brümmer, A., 2010, Schrauben-Machinen: 8. VDI - Fachtagung. VDI Verlag GmbH & Co. KG, p. 55-66 12 p. (VDI Berichte; no. 2101).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  86. Numerische Beschreibung der Mikrostrukturentwicklung beim Strangpressen am Beispiel der Aluminiumlegierungen EN AW-6082 und EN AW 7020

    Foydl, A., Ben Khalifa, N., Tekkaya, A. E. & Broisius, A., 2010, In: International Aluminium Journal. 86, 4, p. 56-60 5 p.

    Research output: Journal contributions › Journal articles › Research

  87. Planning and control of logistics for offshore wind farms

    Scholz-Reiter, B., Lütjen, M., Heger, J. & Schweizer, A., 2010, Advances in Mathematical and Computational Methods - 12th WSEAS International Conference on Mathematical and Computational Methods in Science and Engineering, MACMESE'10. World Scientific and Engineering Academy and Society - WSEAS, p. 242-247 6 p. (International Conference on Mathematical and Computational Methods in Science and Engineering - Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  88. Published

    Projektmentoring mit Schülerinnen-Roboterbau

    Block, B-M., 2010, Innovative Lehre : Grundsätze, Konzepte, Beispiele der Leuphana Universität Lüneburg. Cremer-Renz, C. & Jansen-Schulz, B. (eds.). Bielefeld: UniversitätsVerlagWebler, p. 193-209 17 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  89. Robust decoupling through algebraic output feedback in manipulation systems

    Mercorelli, P., 2010, In: Kybernetika. 46, 5, p. 850-869 20 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  90. Published

    Sensormikrosysteme zur Überwachung der Atemluftqualität basierend auf Polymer Nanofasern

    Fuhrhop, C., Georgiadis, A., Madeira Noguiera, C. & Ivanova, T., 2010, Sensoren und Messsysteme 2010: Vorträge der 15. ITG/GMA-Fachtagung vom 18. bis 19. Mai in Nürnberg. 1. ed. VDE Verlag GmbH, 7 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  91. Simulation of stresses during casting of binary magnesium-aluminum alloys

    Pokorny, M. G., Monroe, C. A., Beckermann, C., Zhen, Z. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 401-407 7 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  92. Simulation of the quench sensitivity of the aluminum alloy 6082

    Güzel, A., Jäger, A., Ben Khalifa, N. & Tekkaya, A. E., 2010, Advances on hot extrusion and simulation of light alloys: selected, peer reviewed papers from the International Conference on Extrusion and Benchmark (ICEB). Tekkaya, A. E. & Ben Khalifa, N. (eds.). Trans Tech Publications, Vol. 424. p. 51-56 6 p. (Key Engineering Materials; vol. 424).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  93. Solid state recycling of different chip types of aluminum alloy 6060 by hot extrusion

    Güley, V., Pantke, K., Ben Khalifa, N., Tekkaya, A. E. & Biermann, D., 2010, Sustainable Production for Resource Efficiency and Ecomobility: International Chemnitz Manufacturing Colloquium, 2010. Verlag Wissenschaftliche Scripten, p. 775-790 16 p. (Berichte aus dem IWU; vol. 54).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  94. Status of the development of creep resistant magnesium materials for automotive applications

    Karl, U. K., Yuanding, H., Hajo, D. & Norbert, H., 2010, In: Materials Science Forum. 638-642, p. 73-80 8 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  95. The influence of rotor designs suitable for industrial production on the performance of screw compressors

    Hauser, J., Brümmer, A., Ben Khalifa, N. & Tekkaya, A. E., 2010, Schrauben-Machinen: 8. VDI - Fachtagung. VDI Verlag GmbH & Co. KG, p. 67-78 12 p. (VDI Berichte; no. 2101).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  96. Towards Advanced Learning in Dispatching Rule-Based Scheuling

    Scholz-Reiter, B., Heger, J., Hildebrandt, T. & Rippel, D., 2010, LOGMS 2010: International Conference on Logistics and Maritime Systems. Pusan National University, p. 39-48 10 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  97. Towards improved dispatching rules for complex shop floor scenarios - A genetic programming approach

    Hildebrandt, T., Heger, J. & Scholz-Reiter, B., 2010, Proceedings of the 12th Annual Genetic and Evolutionary Computation Conference, GECCO '10. New York: Association for Computing Machinery, Inc, p. 257-264 8 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  98. Wavelet functions for rejecting spurious values

    Mercorelli, P., 2010, In: Recent Patents on Electrical and Electronic Engineering. 3, 2, p. 100-113 14 p.

    Research output: Journal contributions › Journal articles › Research

  99. Noise level estimation and detection

    Mercorelli, P., 01.2010, In: Recent Patents on Electrical and Electronic Engineering. 3, 1, p. 66-76 11 p.

    Research output: Journal contributions › Journal articles › Research

  100. Preparation and properties of high purity Mg-Y biomaterials

    Peng, Q., Huang, Y., Zhou, L., Hort, N. & Kainer, K. U., 01.2010, In: Biomaterials. 31, 3, p. 398-403 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next