1. //
  2. Start
  3. //
  4. Publications
  5. //
  6. Browse
  7. //

Browse by research area

301 - 400 out of 1,653Page size: 100
Sort by: Type

  1. Finite element based determination and optimization of seam weld positions in porthole die extrusion of double hollow profile with asymmetric cross section

    Schwane, M., Kloppenborg, T., Ben Khalifa, N., Jäger, A. & Tekkaya, A. E., 2014, Advances in Hot Metal Extrusion and Simulation of Light Alloys. Erman Tekkaya, A. & Jäger, A. (eds.). Trans Tech Publications, Vol. 585. p. 95-102 8 p. (Key Engineering Materials; vol. 585).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  2. Published

    Flexible Manufacturing of Concave–Convex Parts by Incremental Sheet Forming with Active Medium

    Thiery, S. & Ben Khalifa, N., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). Cham: Springer, p. 549-561 13 p. (The Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  3. Published

    Flow Behavior Investigation during Miniaturized Extrusion of Aluminum (AA6082) and Magnesium (AZ31)

    Nienaber, M., Esterl, F., Lehmann, J., Bohlen, J. & Ben Khalifa, N., 2024, Thirteenth International Aluminum Extrusion Technology Seminar (ET'24): April 30 - May 02 2024, Orlando, Florida, USA. Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 1-7 7 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  4. Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling

    Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Dharmendra, C. & Hort, N., 2019, Magnesium Technology 2019. Neelameggham, N. R., Joshi, V. V., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 313-318 6 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  5. Friction analyses in twisted and helical profile extrusion of aluminum alloys

    Ben Khalifa, N., Schikorra, M. & Erman Tekkaya, A., 24.09.2008, Metal Forming 2008. The 12th International Conference. : Akademia Gorniczo-Hutnicza Krakow, Poland. September 21.-24. 2008.. Verlag Stahleisen GmbH, p. 102-107 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  6. Published

    Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

    Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  7. Published

    Friction hysteresis compensation using phase correction of periodic trajectories

    Haus, B., Mercorelli, P. & Werner, N., 19.09.2017, 22nd International Conference on Methods and Models in Automation and Robotics, MMAR 2017: 28-31 Aug. 2017. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 325-330 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  8. Friction-induced vibrations during tightening of bolted joints: Insights from a multi-body model

    Baramsky, N., Seibel, A. & Schlattmann, J., 11.2017, ASME 2017 International Mechanical Engineering Congress and Exposition : Volume 4A: Dynamics, Vibration, and Control. The American Society of Mechanical Engineers(ASME), 8 p. V04AT05A064. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 4A-2017).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  9. Published

    Fulfillment of Heterogeneous Customer Delivery Times through Decoupling the Production and Accelerating Production Orders

    Heuer, T., Maier, J. T., Schmidt, M. & Nyhuis, P., 2022, Conference on Production Systems and Logistics: International Conference, CPSL 2022, hosted at the University of British Columbia in Vancouver, Canada, 17th May 2022 – 20th May 2022, Proceedings. Herberger, D. & Hübner, M. (eds.). Hannover: publish-Ing., p. 564-573 10 p. (Proceedings of the Conference on Production Systems and Logistics; vol. 3).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  10. Published

    Fusion of knowledge bases for better navigation of wheeled mobile robotic group with 3D TVS

    Sergiyenko, O., Tyrsa, V., Ivanov, M., Mercorelli, P., Hernandez, W. & Kolendovska, M., 01.06.2020, 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2020. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 532-537 6 p. 9161957

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  11. Published

    Fuzzy based control of a nonholonomic car-like robot for drive assistant systems

    Mercorelli, P., 27.06.2018, Proceedings of the 2018 19th International Carpathian Control Conference (ICCC): La Contessa Castle Hotel, Szilvásvárad, Hungary, May 28-31, 2018. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 434-439 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  12. Gaussian processes for dispatching rule selection in production scheduling: Comparison of learning techniques

    Scholz-Reiter, B., Heger, J. & Hildebrandt, T., 2010, Proceedings - IEEE International Conference on Data Mining, ICDM. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 631-638 8 p. (IEEE International Conference on Data Mining Workshops).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  13. Published

    Gaussian trajectories in motion control for camless engines

    Haus, B., Mercorelli, P. & Werner, N., 11.07.2017, Proceedings of the 2017 21st International Conference on Process Control (PC). Fikar, M. & Kvasnica, M. (eds.). 1 ed. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 76-80 5 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  14. Published

    Gender and Diversity aspects in Engineering Education and their impact on the design of engineering curricula

    Block, B-M. & Guerne, M. G., 18.06.2021, Proceedings of the 2021 IEEE Global Engineering Education Conference, EDUCON 2021: Women in Engineering. Klinger, T., Kollmitzer, C. & Pester, A. (eds.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 738-744 7 p. 9454043. (IEEE Global Engineering Education Conference, EDUCON; vol. 2021-April).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  15. Generating dispatching rules for semiconductor manufacturing to minimize weighted tardiness

    Pickardt, C., Branke, J., Hildebrandt, T., Heger, J. & Scholz-Reiter, B., 2010, Proceedings - Winter Simulation Conference. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 2504-2515 12 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  16. Published

    Generating Energy Optimal Powertrain Force Trajectories with Dynamic Constraints

    Mercorelli, P. & Schmidt, S., 2013, Mathematical Methods and Optimization Techniques in Engineering. Biolek, D., Walter, H., Utu, I. & von Lucken, C. (eds.). World Scientific and Engineering Academy and Society - WSEAS, p. 228-233 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  17. Genetic Implications of Chemical and Textural Properties of Some Fra Mauro Breccias (Apollo 14)

    Knöll, H-D., Stöffler, D., Bierhaus, E. & Liening, M., 1980, Cosmic Mineralogy: Proceedings of the XI Geneal Meeting of IMA, Nvosibirsk, 4.-10. September 1978. Leningrad: USSR Academy of Science, p. 15-24 10 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  18. Published

    Geometrical Accuracy in Two-Stage Incremental Sheet Forming with Active Medium

    Thiery, S. & Ben Khalifa, N., 2022, Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Behrens, B-A., Brosius, A., Drossel, W-G., Hintze, W., Ihlenfeldt, S. & Nyhuis, P. (eds.). Cham: Springer, p. 65-74 10 p. (Lecture Notes in Production Engineering; vol. Part F1160).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  19. Published

    Geometric analysis of a laser scanner functioning based on dynamic triangulation

    Sepulveda-Valdez, C., Sergiyenko, O., Tyrsa, V., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Murrienta-Rico, F. N., Miranda-Vega, J. E., Mercorelli, P. & Kolendovska, M., 01.06.2020, 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE 2020): 17 - 19 June, 2020, Delft, Netherlands, Proceedings . IEEE. I. E. S. (ed.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1398-1403 6 p. 9152268. (IEEE International Symposium on Industrial Electronics (ISIE); vol. 2020).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  20. Geometric control techniques for manipulation systems

    Prattichizzo, D., Mercorelli, P., Bicchi, A. & Vicino, A., 01.05.1997, Proceedings of the IFAC International Conference on Control of Industrial Systems. Elsevier B.V., p. 1599-1604 6 p. (IFAC Proceedings; vol. 30, no. 6).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  21. Geometric control tools for robotic manipulators

    Prattichizzo, D. & Mercorelli, P., 01.08.1999, Proceedings of the ECC 1999 European Conference on Control. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 3298-3303 6 p. 15108302

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  22. Geometric disturbance decoupling control of vehicles with active suspensions

    Prattichizzo, D., Mercorelli, P., Bicchi, A. & Vicino, A., 1998, Proceedings of the IEEE International Conference on Control Applications. IEEE - Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 253-257 5 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  23. Published

    Geometric Properties on the Perfect Decoupling Disturbance Control in Manufacturing Systems

    Mercorelli, P. & Schimmack, M., 2016, Proceedings of the 2nd International Afro-European Conference for Industrial Advancement, AECIA 2015. Snasel, V., Alimi, A. M., Abraham, A., Wegrzyn-Wolska, K. & Hassanien, A. E. (eds.). Wiesbaden: Springer, p. 283-292 10 p. (Advances in Intelligent Systems and Computing; vol. 427, no. 1).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  24. Grain refinement of Mg-Al alloys by carbon inoculation

    Huang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K. U. & Kim, G. S., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 419-424 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  25. Published

    Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024

    Chan, C. Y. C., Suhuddin, U. F. H. R., Rath, L., Bachiega, F. L. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 422-428 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  26. Published

    High resolution measurement of physical variables change for INS

    Murrieta-Rico, F. N., Hernandez-Balbuena, D., Rodriguez-Quiñonez, J. C., Mercorelli, P., Petranovskii, V., Raymond-Herrera, O., Nieto-Hipolito, J. I., Tyrsa, V., Sergiyenko, O., Lindner, L. & Hernández, W., 17.11.2016, Proceedings - 2016 IEEE 25th International Symposium on Industrial Electronics, ISIE 2016. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 912-917 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  27. High temperature deformation mechanisms and processing map for hot working of cast-homogenized Mg-3Sn-2Ca alloy

    Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2010, THERMEC 2009. Chandra, T., Wanderka, N., Reimers, W. & Ionescu, M. (eds.). Trans Tech Publications Ltd, p. 3616-3621 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  28. High temperature deformation of cast ZW11 magnesium alloy with very large grain size

    Rao, K. P., Bagheripoor, M., Dieringa, H. & Hort, N., 2017, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 232-237 6 p. (Key Engineering Materials; vol. 725 KEM).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  29. High temperature deformation of magnesium alloy TX32-0.4Al-0.8Si

    Dharmendra, C., Rao, K. P., Hort, N. & Kainer, K. U., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 41-45 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  30. Homogenization approach based on laminates

    Klusemann, B. & Svendsen, B., 16.10.2010, PAMM: 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Wieners, C. (ed.). 1 ed. Wiley-VCH Verlag, Vol. 10. p. 419–420 2 p. (PAMM; vol. 10, no. 1).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  31. Hot forging behavior of Mg−8Al−4Ba−4Ca (ABaX844) alloy and validation of processing map

    Rao, K. P., Dharmendra, C., Prasad, Y. V. R. K., Dieringa, H. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 289-296 8 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  32. Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulation

    Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 449-454 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  33. Hot rolling and deep drawing of AM50 sheet

    Göken, J., Hort, N., Blawert, C., Steinhoff, K. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 205-210 6 p. (Magnesium Technology; vol. 2006).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  34. Hot tearing susceptibility of Mg-5Nd-xZn alloys

    D'Elia, F., Tolnai, D., Mendis, C. L. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 129-134 6 p. (Magnesium Technology; vol. 2016-January).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  35. Published

    Hybrid Hydraulic Piezo Actuator and its Control for Camless Internal Combustion Engines

    Mercorelli, P., Werner, N., Becker, U. & Harndorf, H., 2012, 7th International Conference on Integrated Power Electronics Systems (CIPS), 2012 : 7th International Conference on Integrated Power Electronics Systems ; proceedings ; March, 6 - 8, 2012 Nuremberg/Germany. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 189-194 6 p. 6170683. (ETG-Fachbericht; vol. 133).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  36. Published

    Hysteresis compensation in a piezo-hydraulic actuator using heuristic phase correction of periodic trajectories

    Haus, B., Mercorelli, P. & Werner, N., 21.12.2016, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 565-570 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  37. Published

    Image compression based on periodic principal components

    Hernandez, W., Mendez, A., Quezada-Sarmiento, P. A., Jumbo-Flores, L. A., Mercorelli, P., Tyrsa, V., Acosta-Vargas, P., Camejo, I. M., Muñoz Cagua, J. R. & Cevallos Cevallos, W. B., 01.10.2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 5634-5641 8 p. 8926747. (IECON Proceedings (Industrial Electronics Conference); vol. 2019-October).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  38. Increased productivity in hot aluminum extrusion by using extrusion dies with inner cooling channels manufactured by rapid tooling

    Hölker, R., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, Material Forming ESAFORM 2014: 17th Conference of the European Scientific Association on Material Forming. Larkiola, J. (ed.). Trans Tech Publications, Vol. 611-612. p. 981-988 8 p. (Key Engineering Materials; vol. 611-612).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  39. Published

    Individual Scans Fusion in Virtual Knowledge Base for Navigation of Mobile Robotic Group with 3D TVS

    Ivanov, M., Sergiyenko, O., Tyrsa, V. V., Mercorelli, P., Kartashov, V. M., Hernandez, W., Sheiko, S. & Kolendovska, M., 26.12.2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society: Proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 3187-3192 6 p. 8591442. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  40. Influence of cerium on stress corrosion cracking in AZ91D

    Heilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 305-309 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  41. Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91

    Zander, D., Heilig, M., Hort, N., Klaus, G., B̈hrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 381-384 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  42. Published

    Influence of Equal-Channel Angular Pressing on the Microstructure and Texture of Mg-Zn-Y-Zr-RE Alloy Sheets

    Böhm, V., Gruber, M., Abele, E., Steinbauer, C., Victoria-Hernández, J., Letzig, D., Ben Khalifa, N. & Volk, W., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 456-466 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  43. Influence of Nd in extruded Mg10Gd base alloys on fatigue strength

    Maier, P., Tober, G., Mendis, C. L., Müller, S. & Hort, N., 23.05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 419-424 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  44. Published

    Influence of Process Parameters and Die Design on the Microstructure and Texture Development of Direct Extruded Magnesium Flat Products

    Nienaber, M., Safieh, N., Bohlen, J. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 511-521 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  45. Influence of strontium, silicon and calcium additions on the properties of the AM50 alloy

    Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 459-462 4 p. (Materials Science Forum; vol. 618 619).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  46. Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn Alloys

    Huang, Y., Gu, J., You, S., Kainer, K. U. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 331-338 8 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  47. Influences of Y additions on the hot tearing susceptibility of Mg-1.5wt.%Zn alloys

    Wang, Z., Huang, Y. D., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 306-310 5 p. (Materials Science Forum; vol. 765).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  48. Influences of yttrium content on microstructure and mechanical properties of as-cast Mg–Ca–Y–Zr alloys

    You, S., Huang, Y., Kainer, K. U. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 91-97 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  49. Published

    Influencing Parameters in the Deep Drawing of Fiber Metal Laminates with Low Viscous Matrix

    Kruse, M. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 2: ICTP 2023. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer, Vol. 2. p. 124-134 11 p. (Lecture Notes in Mechanical Engineering (LNME)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  50. Published

    Innovation in Continuing Engineering Education with focus on gender and non-traditional students' pathways

    Block, B. M., 2017, SEFI Annual Conference 2017: 18-21 September 2017, Azores, Portugal; Proceedings; Education Excellence for Sustainability. Bernardino, J., Rocha, J. & Quadrado, J. C. (eds.). European Society for Engineering Education, p. 276-283 8 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  51. Innovative hybrid process in metal forming

    Jäger, A., Selvaggio, A., Hänisch, S., Haase, M., Becker, C., Kolbe, J., Ben Khalifa, N. & Tekkaya, A. E., 2013, North American Manufacturing Research Conference 2013. North American Manufacturing Research Institute of SME, Vol. 41. p. 205-214 10 p. (Transactions of the North American Manufacturing Research Institution of SME).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  52. Published

    Input-Output Linearization of a Thermoelectric Cooler for an Ice Clamping System Using a Dual Extended Kalman Filter

    Van Rossum, F., Haus, B., Mercorelli, P. & Aschemann, H., 2023, 2023 27th International Conference on Methods and Models in Automation and Robotics, MMAR 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 199-204 6 p. (International Conference on Methods and Models in Automation and Robotics).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  53. In situ studies of light metals with synchrotron radiation and neutrons

    Staron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M., Hort, N., Eckerlebe, H., Kainer, K. U., Müller, M. & Schreyer, A., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 192-197 6 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  54. In situ synchrotron diffraction of the solidification of Mg-RE alloys

    Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 253-257 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  55. In situ synchrotron radiation diffraction during melting and solidification of Mg-Al alloys containing CaO

    Wiese, B., Mendis, C. L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H. P., Bruckner, R., Kainer, K. U. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 191-195 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  56. In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)

    Szakacs, G., Wiese, B., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Naira, M., Kainer, K. U. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 213-218 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  57. In situ synchrotron radiation diffraction during solidification of Mgl5Gd: Effect of cooling rate

    Szakács, G., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, K. U., Grobner, J., Schmid-Fetzer, R. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 79-84 6 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  58. Published

    In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

    Tolnai, D., Gavras, S., Stark, A., Bartosch, M., Witte, F. & Hort, N., 01.01.2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 143-148 6 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  59. In situ tensile texture analysis of a new Mg-RE alloy

    Gan, W. M., Huang, Y. D., Xu, Y. L., Hofmann, M., Kainer, K. U. & Hort, N., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 779-783 5 p. (Materials Science Forum; vol. 879).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  60. Integrated curvature sensing of soft bending actuators using inertial measurement units

    Seibel, A. & Schiller, L., 09.11.2018, ASME 2018 International Mechanical Engineering Congress and Exposition : Volume 9: Mechanics of Solids, Structures, and Fluids. The American Society of Mechanical Engineers(ASME), 6 p. V009T12A034. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  61. Published

    Integration of laboratory experiments into introductory electrical engineering courses: concept, implementation and competence-based evaluation

    Block, B-M., 2014, 2014 IEEE Global Engineering Education Conference: Engineering Education Towards Openness and Sustainability, IEEE EDUCON 2014. I. O. E. A. E. E. & B. U. (eds.). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 23-29 7 p. 6826062. (IEEE Global Engineering Education Conference, EDUCON).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  62. Integrierte Simulationsmethodik zur Investitionsbewertung von Mikroproduktionssystemen

    Scholz-Reiter, B., Lütjen, M. & Heger, J., 2007, Kolloquium Mikroproduktion - Fortschritte, Verfahren, Anwendungen: Eine Kooperation der Sonderforschungsbereiche 440, 499, 516 und 747. Universität Karlsruhe, p. 237-242 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  63. Published

    Interdisciplinary engineering education in the context of digitalization and global transformation prozesses.

    Block, B-M., Haus, B., Stenken, A. & von Geyso, T., 11.2020, Engaging Engineering Education : Books of Abstracts - SEFI 48th Annual Conference Proceedings. Veen, J. V. D., Hattum-Janssen, N. V., Järvinen, H-M., Leat, T. D. & Dam, I. T. (eds.). Enschede : European Society for Engineering Education (SEFI), p. 617-627 11 p. (SEFI 48th Annual Conference Engaging Engineering Education, Proceedings).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  64. Intermetallic phase characteristics in the Mg–Nd–Zn system

    Tolnai, D., Hill, S. A., Gavras, S., Subroto, T., Buzolin, R. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 391-397 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  65. Inversion of fuzzy neural networks for the reduction of noise in the control loop

    Nentwig, M. & Mercorelli, P., 2008, Intelligent Manufacturing Systems. Pereira, C. E., Zaikin, O. & Banaszak, Z. A. (eds.). International Federation of Automatic Control, Vol. 9. p. 157-162 6 p. (IFAC Proceedings Volumes; vol. 41, no. 3).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  66. Investigation and Modelling of the Influence of Cooling Rates on the Microstructure of AZ91 Alloys

    Gavras, S., Bilal, M. U., Tolnai, D. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 281-287 7 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  67. Investigation of compression behavior of Mg-4Zn-2(Nd, Gd)-0.5Zr at 350°C by in situ synchrotron radiation diffraction

    Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 103-107 5 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  68. Investigation of interaction between forming processes and rotor geometries of screw machines

    Kauder, K., Brümmer, A., Hauser, J., Tekkaya, A. E., Schikorra, M. & Ben Khalifa, N., 30.09.2007, International Conference on Compressors and their Systems: Cass Business School, City University London, 10-12 September 2007. London: Chandos Publishing Ltd., p. 147-158 12 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  69. Published

    Investigation of temperature evolution and flash formation at AA5083 studs during friction surfacing

    Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 05.01.2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 660-665 6 p. (Materials Science Forum; vol. 1016 MSF).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  70. Investigation of the Controllability of Inductive Power Transmission Systems based on Flexible Coils

    Bouattour, G., Mhammedi, T., Yaakoubi, N., Adawi, A. & Kanoun, O., 22.03.2021, 18th IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2021. Institute of Electrical and Electronics Engineers Inc., p. 216-221 6 p. 9429428. (IEEE International Multi-Conference on Systems, Signals and Devices, SSD 2021; vol. 18).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  71. Investigation of the dynamic grain structure evolution during hot extrusion of En AW-6082

    Güzel, A., Ben Khalifa, N., Jäger, A. & Tekkaya, A. E., 2012, Proceedings of the Tenth International Aluminum Extrusion Technology Seminar: Success X Design - Volum I. Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 603-609 7 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  72. Investigation on Flexible Coils Geometries for Inductive Power Transmission Systems

    Bouattour, G., Chen, X., Ben Jmeaa Derbel, H. & Kanoun, O., 30.10.2019, 2019 5th International Conference on Nanotechnology for Instrumentation and Measurement, NanofIM 2019. Institute of Electrical and Electronics Engineers Inc., 9233478. (2019 5th International Conference on Nanotechnology for Instrumentation and Measurement, NanofIM 2019).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  73. Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary Alloys

    Xu, Y., Yang, L., Liu, W., Sun, J., Xiao, L., Jiang, X. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 79-85 7 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  74. Investigations in the magnesium-tin system

    Bowles, A. L., Dieringa, H., Blawert, C., Hort, N. & Kainer, K. U., 15.07.2005, Magnesium - Science, Technology and Applications, Mg - Proceedings of the International Conference on Magnesium - Science, Technology and Applications. Ke, W., Han, E. H., Han, Y. F., Kainer, K. U. & Luo, A. A. (eds.). Trans Tech Publications Ltd, p. 135-138 4 p. (Materials Science Forum; vol. 488-489).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  75. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

    Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 105-110 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  76. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

    Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Ulrich Kainer, K., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 105-110 6 p. (TMS Annual Meeting).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  77. Investigations on hot tearing of Mg-Zn-(Al) alloys

    Zhou, L., Huang, Y., Mao, P., Kainer, K. U., Liu, Z. & Hort, N., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Nealameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 125-130 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  78. Investigations on microstructure and properties of Mg-Sn-Ca alloys with 3% Al additions

    Elsayed, F. R., Leil, T. A., El-Aziz, A. A., Kainer, K. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  79. In vitro corrosion and cytocompatibility properties of Mg-2Gd-X(Ag, Ca) alloys

    Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 347-351 5 p. (Magnesium Technology; vol. 2016-January).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  80. Published

    Kalman Filter for Predictive Maintenance and Anomaly Detection

    Hovsepyan, S., Papadoudis, J. & Mercorelli, P., 31.05.2021, 22nd International Carpathian Control Conference, ICCC 2021. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. 9454654. (International Carpathian Control Conference, ICCC; no. 22).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  81. Published

    Kinetic damping in the admittance and impedance spectra of the spherical impedance probe

    Oberrath, J., 09.07.2017, Proceedings of the 33rd International Conference on Phenomena in Ionized Gases: Estoril, Portugal. 9-14 July 2017. Alves, L. L. & Tejero-del-Caz, A. (eds.). Universidade de Lisboa, p. 353 1 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  82. Kit based motion generator for a soft walking robot

    Schiller, L., Maruthavanan, D., Seibel, A. & Schlattmann, J., 16.11.2020, ASME 2020 International Mechanical Engineering Congress and Exposition : Volume 7A: Dynamics, Vibration, and Control: Control Theory and Applications. The American Society of Mechanical Engineers(ASME), 8 p. V07AT07A009. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7A-2020).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  83. Published

    Laser Scanning Point Cloud Improvement by Implementation of RANSAC for Pipeline Inspection Application

    Sepulveda-Valdez, C., Sergiyenko, O., Alaniz-Plata, R., Nunez-Lopez, J. A., Tyrsa, V., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Mercorelli, P., Kolendovska, M., Kartashov, V., Miranda-Vega, J. E. & Murrieta-Rico, F. N., 2023, IECON 2023 - 49th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  84. Published

    Learning Rotation Sensitive Neural Network for Deformed Objects' Detection in Fisheye Images

    Chen, Z. & Georgiadis, A., 11.2019, 2019 4th International Conference on Robotics and Automation Engineering (ICRAE 2019): November 22-24, 2019, Singapore . Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 125-129 5 p. 9043800. (International Conference on Robotics and Automation Engineering, ICRAE ; vol. 4).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  85. Lightweight construction by means of profiles

    Chatti, S., Pietzka, D., Ben Khalifa, N., Jäger, A., Selvaggio, A. & Tekkaya, A. E., 2012, Material Forming ESAFORM 2012. Merklein, M. & Hagenah, H. (eds.). Trans Tech Publications, Vol. 504-506. p. 369-374 6 p. (Key Engineering Materials; vol. 504-506).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  86. Linear free vibrations with uncertain initial conditions

    Seibel, A. & Schlattmann, J., 2014, Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics. Sas, P., Moens, D. & Denayer, H. (eds.). KU Leuven, p. 4467-4480 14 p. (Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  87. Published

    Linked Accomplishment Of Order Management And Production Planning And Control. An Integrated Model-based Approach

    Hillnhagen, S., Mütze, A., Nyhuis, P. & Schmidt, M., 2021, Conference on Production Systems and Logistics: International Conference, CPSL 2021, Digital Event hosted via publish-Ing; August 10-11, 202;1 Proceedings. Herberger, D. & Hübner, M. (eds.). Offenburg: publish-Ing., p. 688 - 698 11 p. (Proceedings of the ... Conference on Production Systems and Logistics; vol. 2).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  88. Published

    Localization of Passengers Inside Intelligent Vehicles by the Use of Ultra Wideband Radars

    Galdia, P., Carsten, K. & Georgiadis, A., 2011, Signal processing, image processing and pattern recognition: international conference, SIP 2011. Kim, T., Adeli, H., Ramos, C. & Kang, B-H. (eds.). Springer, p. 92-102 11 p. (Communications in Computer and Information Science; vol. 260 CCIS).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  89. Low cycle fatigue properties of extruded Mg10GdxNd alloys

    Tober, G., Maier, P., Müller, S. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 115-120 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  90. Published

    Machine Learning-Supported Planning of Lead Times in Job Shop Manufacturing

    Kramer, K., Wagner, C. & Schmidt, M., 2020, Advances in Production Management Systems. The Path to Digital Transformation and Innovation of Production Management Systems - IFIP WG 5.7 International Conference, APMS 2020, Proceedings: The Path to Digital Transformation and Innovation of Production Management Systems IFIP WG 5.7 International Conference, APMS 2020 Novi Sad, Serbia, August 30 – September 3, 2020 Proceedings, Part I. Lalic, B., Marjanovic, U., Majstorovic, V., von Cieminski, G. & Romero, D. (eds.). Cham: Springer, Vol. 1. p. 363-370 8 p. (IFIP Advances in Information and Communication Technology; vol. 591 IFIP).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  91. Published

    Machine vision system errors for unmanned aerial vehicle navigation

    Lindner, L., Sergiyenko, O., Rivas-Lopez, M., Ivanov, M., Rodriguez-Quinonez, J. C., Hernandez-Balbuena, D., Flores-Fuentes, W., Tyrsa, V., Muerrieta-Rico, F. N. & Mercorelli, P., 03.08.2017, Proceedings: 2017 IEEE International Symposium on Industrial Electronics (ISIE). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1615-1620 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  92. Published

    Machine vision system for UAV navigation

    Lindner, L., Sergiyenko, O. Y., Rivas-Lopez, M., Valdez-Salas, B., Rodríguez-Quinonez, J. C., Hernández-Balbuena, D., Flores-Fuentes, W., Tyrsa, V., Barrera, M. M., Muerrieta-Rico, F. N., Mercorelli, P., Gurko, A. & Kartashov, V. M., 02.02.2017, 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2016. IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. 7841356. (2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2016).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  93. Machining of hybrid reinforced Mg-MMCs using abrasive water jetting

    Aust, E., Elsäßer, M., Hort, N. & Limberg, W., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 345-349 5 p. (Magnesium Technology; vol. 2006).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  94. Macrostructure evolution in directionally solidified Mg-RE alloys

    Salgado-Ordorica, M. A., Punessen, W., Yi, S., Bohlen, J., Kainer, K. U. & Hort, N., 28.02.2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 113-118 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  95. Magnesium alloy containing silver for degradable biomedical implants

    Lukáč, F., Vlček, M., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kekule, T., Szakács, G., Hort, N. & Kainer, K. U., 2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1086-1091 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  96. Magnesium-based metal matrix nanocomposites—processing and properties

    Dieringa, H. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 679-691 13 p. (Minerals, Metals and Materials Series; vol. Part F12).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  97. Magnesium melt protection

    Hort, N., Wiese, B., Dieringa, H. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 78-81 4 p. (Materials Science Forum; vol. 828-829).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  98. Magnesium permanent mold Castings optimization

    Elsayed, F. R., Hort, N., Salgado-Ordorica, M. A. & Kainer, K., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 65-68 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  99. Magnesium pistons in engines: Fiction or fact?

    Hort, N., Dieringa, H. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 349-353 5 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  100. Magnesium recycling system prepared by permanent mould- and high pressure die casting

    Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next