Browse by research area

  1. Published

    Revealing the aging mechanisms of solketal, oxymethylene ether, and mixtures thereof as promising e-fuels

    Lichtinger, A., Poller, M. J., Schröder, O., Türck, J., Garbe, T., Krahl, J., Jakob, M. & Albert, J., 15.06.2025, In: Fuel. 390, 13 p., 134738.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  2. Published
  3. Published

    Comprehensive analysis of the forming zone and improvement of diameter reduction prediction in the dieless wire drawing process

    Braatz, M., Bohlen, J. & Ben Khalifa, N., 15.04.2025, In: Journal of Manufacturing Processes. 139, p. 210-223 14 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  4. Published

    Impact of friction stir welding-like heat cycles on precipitates in AA7050 analysed by SAXS and numerical modelling

    Henninger, S., Chafle, R., Maawad, E., Klusemann, B., Müller, M. & Staron, P., 01.03.2025, In: Materialia. 39, 8 p., 102343.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  5. E-pub ahead of print

    Improving mechanical properties of constrained friction processing Mg-Zn-Ca alloys by modifying texture using multiple pass processing

    Chen, T., Fu, B., Suhuddin, U. F. H. R., Shen, T., Li, G., Maawad, E., Shen, J., Santos, J. F. D., Bergmann, J. P. & Klusemann, B., 01.03.2025, (E-pub ahead of print) In: Journal of Materials Science and Technology.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  6. E-pub ahead of print

    Study on AZ31 magnesium alloy-based surface composite through friction stir processing: a review

    Patel, V. K., Rana, H. & Patel, D. K., 06.02.2025, (E-pub ahead of print) In: Welding International.

    Research output: Journal contributionsScientific review articlesResearch

  7. Published

    Inner loop model predictive control and outer loop PI reference governor for PMSMs with input and state saturation for torque control

    Zwerger, T. & Mercorelli, P., 01.02.2025, In: Mathematics and Computers in Simulation. 228, p. 178-201 24 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  8. Published

    Connecting texture development to die design in extruded flat products

    Esterl, F., Nienaber, M., Bohlen, J. & Ben Khalifa, N., 31.01.2025, In: Journal of Manufacturing Processes. 134, p. 891-903 13 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  9. E-pub ahead of print

    Mechanical behavior, microstructural evolution and texture analysis of AA2024-T351 processed by multi-layer friction surfacing with high build rates

    Hoffmann, M., Roos, A. & Klusemann, B., 29.01.2025, (E-pub ahead of print) In: Progress in Additive Manufacturing. 15 p., 146582.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  10. Published

    Evaluating the impact of COVID-19 protection measures and staff absence on radiotherapy practice: A simulation study

    Jambor, E., Viana, J., Reuter-Oppermann, M. & Müller-Polyzou, R., 16.01.2025, In: PLoS ONE. 20, 1, 26 p., e0314190.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  11. Published

    An Over-Actuated Hexacopter Tilt-Rotor UAV Prototype for Agriculture of Precision: Modeling and Control

    Pimentel, G. O., Santos, M. F. D., Lima, J., Mercorelli, P. & Fernandes, F. M., 15.01.2025, In: Sensors. 25, 2, 27 p., 479.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  12. Accepted/In press

    Processing of reactive acrylic thermoplastic resin at elevated temperatures for rapid composite and fiber metal laminate manufacturing

    Kruse, M., Balk, M., Neffe, A. T. & Ben Khalifa, N., 13.01.2025, (Accepted/In press) In: Journal of Thermoplastic Composite Materials. 19 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  13. E-pub ahead of print

    Neural Network-Based Finite-Time Control for Stochastic Nonlinear Systems with Input Dead-Zone and Saturation

    Kharrat, M., Krichen, M., Alhazmi, H. & Mercorelli, P., 11.01.2025, (E-pub ahead of print) In: Arabian Journal for Science and Engineering. 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  14. Published

    Enhancement of the mechanical properties of semi-stationary bobbin tool friction stir welded joints in AA2219 through post-weld heat treatment

    Rezende, G. N., Bernardi, M., Hoffmann, M., Bergmann, L., Zepon, G. & Klusemann, B., 01.01.2025, In: Materials Science and Engineering: A. 920, 11 p., 147498.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  15. Published

    Stepwise-based optimizing approaches for arrangements of loudspeaker in multi-zone sound field reproduction

    Zhou, T., Yasueda, K., Bouattour, G., Georgiadis, A. & Kataoka, A., 01.01.2025, In: Acoustical Science and Technology. 46, 1, p. 11-21 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  16. Published

    Deformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen forming

    Sala, S. T., Bock, F. E., Pöltl, D., Klusemann, B., Huber, N. & Kashaev, N., 01.2025, In: Journal of Intelligent Manufacturing. 36, 1, p. 639-659 21 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  17. Published

    Die geometry influence on the texture and microstructure development during extrusion of AZ31 and ZK60 magnesium alloy chips

    Hendriok, L., Nienaber, M., Kurz, G. & Ben Khalifa, N., 01.2025, In: Materials and Design. 249, 13 p., 113545.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  18. Published

    Neural network-based adaptive fault-tolerant control for strict-feedback nonlinear systems with input dead zone and saturation

    Kharrat, M., Krichen, M., Alhazmi, H. & Mercorelli, P., 01.2025, In: Journal of the Franklin Institute. 362, 2, 21 p., 107471.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  19. Published

    Resilient Privacy Preservation Through a Presumed Secrecy Mechanism for Mobility and Localization in Intelligent Transportation Systems

    Alanazi, M. D., Albekairi, M., Abbas, G., Alanazi, T. M., Kaaniche, K., Elsayed, G. & Mercorelli, P., 01.2025, In: Sensors. 25, 1, 20 p., 115.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  20. Published

    Effect of ambient conditions in friction surfacing

    Hoffmann, M., Duda, E. A., Aspes, P. & Klusemann, B., 2025, In: Welding in the World. 69, 2, p. 397-406 10 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  21. Accepted/In press

    Noninteracting optimal and adaptive torque control using an online parameter estimation with help of polynomials in EKF for a PMSM

    Zwerger, T. & Mercorelli, P., 2025, (Accepted/In press) In: ISA Transactions. 16 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  22. Accepted/In press

    Thermal Degradation and Decomposition of FR4 Laminate PCB Substrates Joined by Friction Riveting

    Rodrigues, C. F., Blaga, L. & Klusemann, B., 2025, (Accepted/In press) In: Applied Composite Materials. 15 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  23. Published

    Innovative Solid-State Recycling of Aluminum Alloy AA6063 Chips Through Direct Hot Rolling Process

    Carta, M., Ben Khalifa, N., Buonadonna, P., El Mohtadi, R., Bertolino, F. & El Mehtedi, M., 17.12.2024, In: Metals. 14, 12, 19 p., 1442.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  24. Influence of zinc and silver additions on hot tearing susceptibility of Mg-14Gd-0.4Zr alloy

    Yang, L., Wang, S., Huang, Y., Hou, Z., Wu, H., Dong, X., Shi, H., Zou, W., Li, D., Li, F., Sun, B., Li, Z., Hort, N. & Xiao, L., 01.12.2024, In: Journal of Rare Earths. 42, 12, p. 2231-2238 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  25. Published

    Point Cloud Optimization Employing Multisensory Vision

    Sepulveda-Valdez, C., Alaniz-Plata, R., Núñez-López, J. A., Alba-Corpus, I. Y., Andrade-Collazo, H., Flores-Fuentes, W., Rodríguez-Quiñonez, J. C., Mercorelli, P., Tyrsa, V., Camacho-López, S. & Sergiyenko, O., 01.12.2024, Scanning Technologies for Autonomous Systems. Rodríguez-Quiñonez, J. C., Flores-Fuentes, W., Castro-Toscano, M. J. & Sergiyenko, O. (eds.). Springer Nature AG, p. 275-302 28 p.

    Research output: Contributions to collected editions/worksChapterpeer-review

  26. Published

    Assistance systems for patient positioning in radiotherapy practice

    Müller-Polyzou, R., Reuter-Oppermann, M., Feger, J., Meier, N. & Georgiadis, A., 12.2024, In: Health Systems. 13, 4, p. 332-360 29 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  27. Published

    Case study on delivery time determination using a machine learning approach in small batch production companies

    Rokoss, A., Syberg, M., Tomidei, L., Hülsing, C., Deuse, J. & Schmidt, M., 12.2024, In: Journal of Intelligent Manufacturing. 35, 8, p. 3937-3958 22 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  28. Published

    Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys

    Antunes Duda, E., Kallien, Z., da Silva Soares, S., Hernandez Schneider, T., Ribeiro Piaggio Cardoso, H., Vieira Braga Lemos, G., Falcade, T., Reguly, A. & Klusemann, B., 12.2024, In: Scientific Reports. 14, 1, 10 p., 9882.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  29. Published

    Improving the surface quality of AlMgSi1 alloy with the selection of the appropriate vibration grinding stones

    Engler, C., Georgiadis, A., Lange, D. & Meier, N., 12.2024, In: Journal of Engineering and Applied Science. 71, 20 p., 35.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  30. Published

    Insight into layer formation during friction surfacing: Relationship between deposition behavior and microstructure

    Hoffmann, M., Kallien, Z., Antunes Duda, E. & Klusemann, B., 12.2024, In: Materials Today Communications. 41, 13 p., 110337.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  31. Published

    Nonlinear recurrence analysis of piezo sensor placement for unmanned aerial vehicle motor failure diagnosis

    Koszewnik, A., Ambroziak, L., Ołdziej, D., Dzienis, P., Ambrożkiewicz, B., Syta, A., Bouattour, G. & Kanoun, O., 12.2024, In: Scientific Reports. 14, 1, 17 p., 8289.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  32. Published

    Precision Denoising in Medical Imaging via Generative Adversarial Network-Aided Low-Noise Discriminator Technique

    Alanazi, T. M. & Mercorelli, P., 12.2024, In: Mathematics. 12, 23, 21 p., 3705.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  33. Published

    Impulsive Feedback Linearization for Decoupling of a Constant Disturbance with Low Relative Degree to Control Maglev Systems

    Diab, M., Mercorelli, P. & Haus, B., 11.11.2024, 2024 28th International Conference on System Theory, Control and Computing (ICSTCC): October 10 - 12, 2024 Sinaia, Romania; Proceedings. Barbulescu, L.-F. (ed.). Piscataway: Institute of Electrical and Electronics Engineers Inc., p. 470-476 7 p. (International Conference on System Theory, Control and Computing, Proceedings; vol. 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  34. Published

    Inductance Estimation Using an EKF for the Robust Control of PMSMs in the Presence of Saturation

    Van Rossum, F. M., Mercorelli, P., Haus, B. & Aschemann, H., 11.11.2024, 2024 28th International Conference on System Theory, Control and Computing (ICSTCC) : October 10 - 12, 2024 Sinaia, Romania; Proceedings . Barbulescu, L.-F. (ed.). Piscataway: Institute of Electrical and Electronics Engineers Inc., p. 463-469 7 p. (International Conference on System Theory, Control and Computing, ICSTCC - Proceedings; vol. 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  35. Published

    Analysis of mechanical properties and microstructure of single and double-pass friction stir welded T-joints for aluminium stiffened Panels

    Wagner, D., Bernardi, M., Grassel, F., Chen, T., Schimanski, K., Bergmann, L. & Klusemann, B., 11.2024, In: Materials and Design. 247, 11 p., 113438.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  36. Published

    Paraphrasing Method for Controlling a Robotic Arm Using a Large Language Model

    Yasuda, S., Komori, Y., Nakajima, K., Tanabe, R., Uemura, W. & Walter, N., 11.2024, GCCE 2024 - 2024 IEEE 13th Global Conference on Consumer Electronics. Institute of Electrical and Electronics Engineers Inc., p. 943-945 3 p. (GCCE - IEEE Global Conference on Consumer Electronics).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  37. Published

    Dynamic Inversion-Enhanced U-Control of Quadrotor Trajectory Tracking

    Lone, A., Zhu, Q., Nemati, H. & Mercorelli, P., 18.10.2024, In: Drones. 8, 10, 24 p., 599.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  38. Published

    Feasibility Study of Solid-State Recycling through Direct Hot Rolling of AA5754 Aluminum Chips for Automotive Applications

    El Mehtedi, M., Buonadonna, P., El Mohtadi, R., Loi, G., Aymerich, F., Ben Khalifa, N. & Carta, M., 01.10.2024, Aluminum, Polymers, Composites and Additive Manufacturing. Omatsu, T., Donati, L., Alin Sirbu, N. & Ali, A. (eds.). Trans Tech Publications Ltd, p. 3-12 10 p. (Materials Science Forum; vol. 1130).

    Research output: Contributions to collected editions/worksChapterpeer-review

  39. Published

    Local and global mechanical properties of orbital friction stir welding on API X65 PSL2 steel / Inconel 625 clad pipes

    Volff Amavisca, C., Vieira Braga Lemos, G., Dornelles Ramos, F., Bergmann, L., Reguly, A. & Klusemann, B., 10.2024, In: International Journal of Advanced Manufacturing Technology. 134, 7-8, p. 3325-3336 12 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  40. Published

    Beschleunigte Erstellung von Simulationsmodellen für Produktions- und Logistikprozesse mithilfe von GPT-basierten Large Language Models

    Krämer, R. & Heger, J., 01.09.2024, ASIM SST 2024 Tagungsband Kurzbeiträge: 27. ASIM Symposium Simulationstechnik, 4.9.-6.9.2024, Universität der Bundeswehr München. Rose, O. & Uhlig, T. (eds.). Wien: ARGESIM Verlag , p. 21 - 24 4 p. (ARGESIM Report; vol. 46)(ASIM Mitteilung; vol. 189).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  41. Published

    Online Estimation of Insulin Sensitivity in Diabetes Type 1 Patients during Menstrual Cycles using Extended Kalman Filtering

    Kunkelmoor, J., Klinger, A. K., Mercorelli, P. & Haus, B., 01.09.2024, In: IFAC-PapersOnLine. 58, 24, p. 315-320 6 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  42. Published

    Quantifying circular economy pathways of decommissioned onshore wind turbines: The case of Denmark and Germany

    Kramer, K. J., Abrahamsen, A. B., Beauson, J., Hansen, U. E., Clausen, N. E., Velenturf, A. P. M. & Schmidt, M., 01.09.2024, In: Sustainable Production and Consumption. 49, p. 179-192 14 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  43. Published

    Process window and mechanical properties for thin magnesium- and zinc-wires in dieless wire drawing

    Braatz, M., Bohlen, J. & Ben Khalifa, N., 09.2024, In: International Journal of Material Forming. 17, 5, 17 p., 46.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  44. Published

    Visual Detection of Traffic Incident through Automatic Monitoring of Vehicle Activities

    Karim, A., Raza, M. A., Alharthi, Y. Z., Abbas, G., Othmen, S., Hossain, M. S., Nahar, A. & Mercorelli, P., 09.2024, In: World Electric Vehicle Journal. 15, 9, 19 p., 382.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  45. Published

    A Study on the Performance of Adaptive Neural Networks for Haze Reduction with a Focus on Precision

    Alshahir, A., Kaaniche, K., Abbas, G., Mercorelli, P., Albekairi, M. & Alanazi, M. D., 15.08.2024, In: Mathematics. 12, 16, 25 p., 2526.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  46. Published

    Localized accelerated degradation of magnesium: A new insight into the mechanism of its biomedical degradation

    Zhang, Y., Yan, K., Xu, W., Wang, C., Qian, K., Shao, Y., Jiang, G., Liu, H., Ju, J., Höche, D., Chu, C., Huang, Y., Willumeit-Römer, R., Xue, F., Hort, N. & Bai, J., 15.08.2024, In: Corrosion Science. 237, 13 p., 112335.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  47. Published

    Measurement in Machine Vision Editorial Paper

    Sergiyenko, O., Flores-Fuentes, W., Rodríguez-Quiñonez, J. C., Mercorelli, P., Kawabe, T. & Bhateja, V., 15.08.2024, In: Measurement: Journal of the International Measurement Confederation. 236, 4 p.

    Research output: Journal contributionsOther (editorial matter etc.)Research

  48. Published

    Advanced Neural Classifier-Based Effective Human Assistance Robots Using Comparable Interactive Input Assessment Technique

    Albekairi, M., Kaaniche, K., Abbas, G., Mercorelli, P., Alanazi, M. D. & Almadhor, A., 13.08.2024, In: Mathematics. 12, 16, 21 p., 2500.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  49. Published

    Fatigue crack initiation and propagation in plain and notched PBF-LB/M, WAAM, and wrought 316L stainless steel specimens

    Braun, M., Chen, T., Shen, J., Fassmer, H., Klusemann, B., Sheikhi, S., Ehlers, S., Müller, E., Sarmast, A. & Schubnell, J., 01.08.2024, In: Materials and Design. 244, 18 p., 113122.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  50. Published

    Application of Friction Riveting technique for the assembly of electronic components on printed circuit boards (PCB)

    Rodrigues, C. F., Boas, M. C. V., Blaga, L., Bartz, O. & Klusemann, B., 08.2024, In: International Journal of Advanced Manufacturing Technology. 133, 11-12, p. 5163-5173 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  51. Design guidelines for metal binder jetting

    Blunk, H. & Seibel, A., 08.2024, In: Progress in Additive Manufacturing. 9, 4, p. 725-732 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  52. Published

    Mathematics in Robot Control for Theoretical and Applied Problems

    Mercorelli, P., Sergiyenko, O. & Tsymbal, O., 18.07.2024, In: Mathematics. 12, 14, 3 p., 2240.

    Research output: Journal contributionsOther (editorial matter etc.)Research

  53. Published

    Interactions of CaO with pure Mg and Mg-Ca alloys—an in situ synchrotron radiation diffraction study

    Wiese, B., Mendis, C. L., Tolnai, D. & Hort, N., 04.07.2024, In: JPhys Materials. 7, 3, 11 p., 035008.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  54. Published

    Feasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic composite

    Malaske, L., Blaga, L. A., Bermann, L., Ahmad, B., Zhang, X. & Klusemann, B., 07.2024, In: Journal of Composite Materials. 58, 17, p. 1987-2003 17 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  55. Published

    How alloying and processing effects can influence the microstructure and mechanical properties of directly extruded thin zinc wires

    Nienaber, M., Bramkamp, S., Ben Khalifa, N. & Bohlen, J., 07.2024, In: Materials Science and Engineering: A. 905, 12 p., 146720.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  56. Published

    Investigation On The Influence Of Remanufacturing On Production Planning And Control – A Systematic Literature Review

    Schulz, J., Hillnhagen, S. & Schmidt, M., 07.2024, Proceedings of the CPSL 2024. Herberger, D. & Hübner, M. (eds.). publish-Ing., p. 13-27 15 p. (Proceedings of the Conference on Production Systems and Logistics; vol. 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  57. Published

    Mathematical Modeling for Robot 3D Laser Scanning in Complete Darkness Environments to Advance Pipeline Inspection

    Sepulveda-Valdez, C., Sergiyenko, O., Tyrsa, V., Mercorelli, P., Rodríguez-Quiñonez, J. C., Flores-Fuentes, W., Zhirabok, A., Alaniz-Plata, R., Núñez-López, J. A., Andrade-Collazo, H., Miranda-Vega, J. E. & Murrieta-Rico, F. N., 07.2024, In: Mathematics. 12, 13, 24 p., 1940.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  58. Published

    Mathematics in Robot Control for Theoretical and Applied Problems

    Mercorelli, P. (Editor), Sergiyenko, O. (Editor) & Tsymbal, O. (Editor), 07.2024, MDPI AG. (Mathematics; vol. 12, no. 14)

    Research output: Books and anthologiesSpecial Journal issueResearch

  59. Published

    Optimal control strategies for PMSM with a decoupling super twisting SMC and inductance estimation in the presence of saturation

    Zwerger, T. & Mercorelli, P., 07.2024, In: Journal of the Franklin Institute. 361, 11, 30 p., 106934.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  60. Published

    Energy Management Architectures for Dual Coil Electromagnetic Vibration Energy Harvesting Converter

    Hamza, K., Bouattour, G., Fakhfakh, A. & Kanoun, O., 28.06.2024, I2MTC 2024 - Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Sustainable Future, Proceedings. Institute of Electrical and Electronics Engineers Inc., 6 p. (Conference Record - IEEE Instrumentation and Measurement Technology Conference).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  61. Published

    New method for assessing the repeatability of the measuring system for roughness measurements

    Engler, C., Georgiadis, A., Meier, N. & Lange, D., 11.06.2024, In: International Journal of Metrology and Quality Engineering. 15, 15 p., 10.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  62. Published

    Ductility and fracture behavior of cold spray additive manufactured zinc

    Huang, C. J., Chen, T., Fu, B. L., Zhang, Z. M., List, A., Wiehler, L., Klusemann, B., Li, W. Y., Gärtner, F. & Klassen, T., 05.06.2024, In: Additive Manufacturing. 89, 16 p., 104310.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  63. Published

    CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems

    Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 p., 102692.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  64. Published

    Quantifying ecosystem services of rewetted peatlands − the MoorFutures methodologies

    Tanneberger, F., Berghöfer, A., Brust, K., Hammerich, J., Holsten, B., Joosten, H., Michaelis, D., Moritz, F., Reichelt, F., Schäfer, A., Scheid, A., Trepel, M., Wahren, A. & Couwenberg, J., 01.06.2024, In: Ecological Indicators. 163, 10 p., 112048.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  65. Published

    Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases

    de Castro, C. C., Neves, A. M. & Klusemann, B., 06.2024, In: Journal of Magnesium and Alloys. 12, 6, p. 2298-2311 14 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  66. Published

    Automation in Clinical Laboratories: A Comprehensive Bibliography Review

    Fernandes, F. M., dos Santos, M. F. & Mercorelli, P., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  67. Published

    Comparison of Bio-Inspired Algorithms in a Case Study for Optimizing Capacitor Bank Allocation in Electrical Power Distribution

    Neto, W. A., dos Santos, M. F., Olivi, L. R., Costa, E. B. & Mercorelli, P., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  68. Published

    Comparison of Trajectory Estimation Methods Based on LIDAR and Monocular Camera in a Simulated Environment

    Evangelista, A. D., Schettino, V. B., dos Santos, M. F. & Mercorelli, P., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  69. Published

    Experimental Tests for an Innovative Catamaran Prototype: An Interesting Application Case

    dos Santos, M. F., de Mello Honório, L., Leal Lopes, V. M., Mercorelli, P., Araújo Neto, E. S. & Machado, R. A., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  70. Published

    PID Controller Application in a Gimbal Construction for Camera Stabilization and Tracking

    de Paula, P. A., dos Santos, M. F., Mercorelli, P. & Schettino, V. B., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  71. Published

    Project and Design of a Catamaran Prototype with Aerial Propulsion System

    Leal Lopes, V. M., De Mello Honório, L., Dos Santos, M. F., Mercorelli, P., Araújo Neto, E. S. & Machado, R. A., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  72. Published

    Vector Fields Autonomous Control for Assistive Mobile Robots

    Olivi, L. R., Neto, W. A., Costa, E. B., dos Santos, M. F., Mercorelli, P. & Cardozo, E., 22.05.2024, Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024. Kot, A. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. (Proceedings of the 2024 25th International Carpathian Control Conference, ICCC 2024).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  73. Published

    Behavior of volumetric core defects in friction extrusion of wire from Al-Cu alloy

    Rath, L., Suhuddin, U. F. H. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA: Association of American Publishers, p. 763-770 8 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  74. Published

    Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study

    Shen, T., Fu, B., Chen, T., Suhuddin, U. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA: Association of American Publishers, p. 1705-1713 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  75. Published

    Eigenstrain method in simulations of laser peen forming of curved surfaces

    Poltl, D., Teja Sala, S., Kashaev, N. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville: Association of American Publishers, p. 2355-2363 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  76. Published

    Neural network-based estimation and compensation of friction for enhanced deep drawing process control

    Thiery, S., Zein El Abdine, M., Heger, J. & Ben Khalifa, N., 15.05.2024, Material Forming ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024 – held in Toulouse (France), at the Pierre Baudis Convention Center between 24-26th April, 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville: MaterialsResearchForum LLC, p. 1462-1471 10 p. 162. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  77. Published

    Achieving high mechanical performance of the large-scale sand-casting Mg–4Y–x nd–y Gd–0.4Zr alloys by tailoring Nd and Gd contents

    Yang, L., Shi, H., Huang, Y., Wang, K., Dong, X., Wu, H., Lu, C., Gan, W., Maawad, E., Sun, B., Li, Z., Hort, N. & Xiao, L., 05.2024, In: Materials Science and Engineering: A. 900, 10 p., 146476.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  78. Published

    Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

    Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 05.2024, In: International Journal of Material Forming. 17, 3, 13 p., 26.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  79. Published

    Zukunftslabor Produktion: Vernetzung, Modellierung und Optimierung in der industriellen Produktion

    Kallisch, J., Denkena, B., Kramer, K., Stürenburg, L., Pachandrin, S., Rokicki, M., Walter, J., Nein, M., Voss, M., Wunck, C., Niemann, K. H., Schmidt, M., Dilger, K., Niederée, C. & Hoffmann, N., 05.2024, In: ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb. 119, 5, p. 372-377 6 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  80. Published

    Recent Advances in Intelligent Algorithms for Fault Detection and Diagnosis

    Mercorelli, P., 22.04.2024, In: Sensors. 24, 8, 17 p., 2656.

    Research output: Journal contributionsScientific review articlesResearch

  81. Published

    Experimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6

    Becker, N., dos Santos, J. F. & Klusemann, B., 16.04.2024, In: Engineering Fracture Mechanics. 300, 11 p., 109963.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  82. E-pub ahead of print

    Influence of implant base material on secondary bone healing: an in silico study

    Nayak, G. S., Roland, M., Wiese, B., Hort, N. & Diebels, S., 13.04.2024, (E-pub ahead of print) In: Computer Methods in Biomechanics and Biomedical Engineering. 9 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  83. Published

    The Impact of AGVs and Priority Rules in a Real Production Setup – A Simulation Study

    Müller, K., Andrew, A. & Heger, J., 08.04.2024, Dynamics in Logistics : Proceedings of the 9th International Conference LDIC 2024, Bremen, Germany. Freitag, M., Kinra, A., Kotzab, H. & Megow, N. (eds.). Springer Science and Business Media B.V., p. 249-260 12 p. (Lecture Notes in Logistics; vol. Part F2520).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  84. Published

    Backward Extended Kalman Filter to Estimate and Adaptively Control a PMSM in Saturation Conditions

    Zwerger, T. & Mercorelli, P., 04.2024, In: Ieee Journal of Emerging and Selected Topics in Industrial Electronics. 5, 2, p. 462-474 13 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  85. Published

    Investigation of microstructural and mechanical properties in AA2024-T351 multi-layer friction surfacing

    Hoffmann, M., Roos, A. & Klusemann, B., 30.03.2024, In: Surface and Coatings Technology. 480, 11 p., 130610.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  86. Published

    Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy

    Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, In: Journal of Materials Research and Technology. 29, p. 4895-4901 7 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  87. Published

    Corrosion behaviour of electropolished magnesium materials

    Kloiber, J., Schultheiß, U., Sotelo, L., Sarau, G., Christiansen, S., Gavras, S., Hort, N. & Hornberger, H., 01.03.2024, In: Materials Today Communications. 38, 14 p., 107983.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  88. Published

    Phase Shift APOD and POD Control Technique in Multi-Level Inverters to Mitigate Total Harmonic Distortion

    Bano, K., Abbas, G., Hatatah, M., Touti, E., Emara, A. & Mercorelli, P., 03.2024, In: Mathematics. 12, 5, 26 p., 656.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  89. Published

    Simulation-based Investigation of Energy Flexibility in the Optimization of Hinterland Drainage

    Hempel, M. C. & Heger, J., 03.2024, In: Simulation Notes Europe. 34, 1, p. 35–42 8 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  90. Published

    Tree diversity and mycorrhizal type co-determine multitrophic ecosystem functions

    Yi, H., Eisenhauer, N., Austen, J. C., Rebollo, R., Ray, T., Bönisch, E., von Oheimb, G., Fichtner, A., Schuldt, A., Patoine, G. & Ferlian, O., 03.2024, In: Journal of Ecology. 112, 3, p. 528-546 19 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  91. Published

    Volume of Imbalance Container Prediction using Kalman Filter and Long Short-Term Memory

    Kim, G., Block, B. M. & Mercorelli, P., 28.02.2024, Artificial Intelligence: Theory and Applications - Proceedings of AITA 2023. Sharma, H., Chakravorty, A., Hussain, S. & Kumari, R. (eds.). Singapore: Springer Science and Business Media Deutschland GmbH, p. 53-63 11 p. (Lecture Notes in Networks and Systems; vol. 843).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  92. Published

    Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures

    Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, In: Additive Manufacturing Letters. 8, 8 p., 100184.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  93. Published

    Insights into creep behavior of Mg–14Gd–1Zn–0.4Zr (wt.%) alloy containing β- and γ-type precipitates

    Shi, H., Yang, L., Huang, Y., Zhou, S., Wang, K., Liu, C., Gavras, S., Xiao, L., Willumeit-Römer, R., Dieringa, H. & Hort, N., 01.02.2024, In: Materials Science and Engineering: A. 893, 10 p., 146065.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  94. Published

    Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy

    Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, In: Journal of Magnesium and Alloys. 12, 2, p. 516-529 14 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  95. Published

    Effect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditions

    Examilioti, T. N., Karanikolas, D., Riekehr, S., Al-Hamdany, N., Papanikos, P., Klusemann, B., Kashaev, N. & Alexopoulos, N. D., 23.01.2024, In: Engineering Fracture Mechanics. 295, 20 p., 109811.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  96. Published

    Novel Magnesium Nanocomposite for Wire-Arc Directed Energy Deposition

    Dieringa, H., Nienaber, M., Giannopoulou, D., Isakovic, J., Bohlen, J., Kujur, M. S., Ben Khalifa, N., Klein, T. & Gneiger, S., 20.01.2024, In: Materials. 17, 2, 11 p., 500.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  97. Published

    Thermal Analysis and Cooling Strategies of High-Efficiency Three-Phase Squirrel-Cage Induction Motors—A Review

    Konda, Y. R., Ponnaganti, V. K., Reddy, P. V. S., Singh, R. R., Mercorelli, P., Gundabattini, E. & Solomon, D. G., 04.01.2024, In: Computation. 12, 1, 21 p., 6.

    Research output: Journal contributionsScientific review articlesResearch

  98. Published

    Advanced ice-clamping control in the context of Industry 4.0

    Mironova, A., Mercorelli, P. & Zedler, A., 01.01.2024, Modeling, Identification, and Control for Cyber- Physical Systems Towards Industry 4.0. Mercorelli, P., Zhang, W., Nemati, H. & Zhang, Y. (eds.). Academic Press Inc., p. 19-40 22 p.

    Research output: Contributions to collected editions/worksChapterpeer-review

  99. Published

    A Theory-Based Concept for Fostering Sustainability Competencies in Engineering Programs

    Block, B. M. & Guerne, M. G., 01.01.2024, Towards a Hybrid, Flexible and Socially Engaged Higher Education - Proceedings of the 26th International Conference on Interactive Collaborative Learning ICL 2023. Auer, M. E., Cukierman, U. R., Vendrell Vidal, E. & Tovar Caro, E. (eds.). Springer Science and Business Media Deutschland GmbH, p. 208-217 10 p. (Lecture Notes in Networks and Systems; vol. 901).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  100. Published

    Control system strategy of a modular omnidirectional AGV

    Macfarlane, A. B. S., van Niekerk, T., Becker, U. & Mercorelli, P., 01.01.2024, Modeling, Identification, and Control for Cyber- Physical Systems Towards Industry 4.0. Marcorelli, P., Zhang, W., Nemati, H. & Zhang, Y. (eds.). Academic Press Inc., p. 169-197 29 p.

    Research output: Contributions to collected editions/worksChapterpeer-review

Previous 1 2 3 4 5 6 7 8 ...18 Next