1. //
  2. Start
  3. //
  4. Publications
  5. //
  6. Browse
  7. //

Browse by research area

901 - 1000 out of 1,666Page size: 100
Sort by: Title

  1. Investigations on thermal fatigue of aluminum- and magnesium-alloy based composites

    Huang, Y. D., Hort, N., Dieringa, H., Maier, P. & Kainer, K. U., 10.2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1399-1405 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  2. Published

    Investigations on the tensile deformation of pure Mg and Mg–15Gd alloy by in-situ X-ray synchrotron radiation and visco-plastic self-consistent modeling

    Xu, Y., Huang, Y., Wang, Y., Gan, W., Wang, S., Maawad, E., Schell, N. & Hort, N., 01.02.2023, In: Journal of Magnesium and Alloys. 11, 2, p. 607-613 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  3. In vitro corrosion and cytocompatibility properties of Mg-2Gd-X(Ag, Ca) alloys

    Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 347-351 5 p. (Magnesium Technology; vol. 2016-January).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  4. In vitro mechanical and corrosion properties of biodegradable Mg-Ag alloys

    Tie, D., Feyerabend, F., Hort, N., Hoeche, D., Kainer, K. U., Willumeit, R. & Mueller, W. D., 06.2014, In: Materials and Corrosion. 65, 6, p. 569-576 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  5. In vivo assessment of biodegradable magnesium alloy ureteral stents in a pig model

    Tie, D., Liu, H., Guan, R., Holt-Torres, P., Liu, Y., Wang, Y. & Hort, N., 15.10.2020, In: Acta Biomaterialia. 116, p. 415-425 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  6. Published

    In vivo degradability and biocompatibility of a rheo-formed Mg–Zn–Sr alloy for ureteral implantation

    Tie, D., Guan, R., Liu, H., Chen, M., Ulasevich, S. A., Skorb, E. V., Holt-Torres, P., Lu, X. & Hort, N., 01.06.2022, In: Journal of Magnesium and Alloys. 10, 6, p. 1631-1639 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  7. In vivo degradation of binary magnesium alloys - A long-term study

    Myrissa, A., Martinelli, E., Szakács, G., Berger, L., Eichler, J., Fischerauer, S. F., Kleinhans, C., Hort, N., Schäfer, U. & Weinberg, A. M., 01.09.2016, In: BioNanoMaterials. 17, 3-4, p. 121-130 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  8. Published

    In vivo urinary compatibility of Mg-Sr-Ag alloy in swine model

    Tie, D., Hort, N., Chen, M., Guan, R., Ulasevich, S., Skorb, E. V., Zhao, D., Liu, Y., Holt-Torres, P. & Liu, H., 01.01.2022, In: Bioactive Materials. 7, p. 254-262 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  9. Ion release from magnesium materials in physiological solutions under different oxygen tensions

    Feyerabend, F., Drücker, H., Laipple, D., Vogt, C., Stekker, M., Hort, N. & Willumeit, R., 01.2012, In: Journal of Materials Science: Materials in Medicine. 23, 1, p. 9-24 16 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  10. ISOVECTOR AND ISOTENSOR COULOMB ENERGIES FOR 61-LESS-THAN-OR-EQUAL-TO-A-LESS-THAN-OR-EQUAL-TO-209

    Pape, A., Antony, M. S. & Georgiadis, A., 01.10.1988, In: Physical Review C: covering nuclear physics. 38, 4, p. 1952-1954 3 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  11. Published

    Jordan Canonical Form for Solving the Fault Diagnosis and Estimation Problems

    Sergiyenko, O., Zhirabok, A., Mercorelli, P., Zuev, A., Filaretov, V. & Tyrsa, V., 03.06.2023, In: Technologies. 11, 3, 13 p., 72.

    Research output: Journal contributions › Journal articles › Research › peer-review

  12. Published

    Kalman Filter for Predictive Maintenance and Anomaly Detection

    Hovsepyan, S., Papadoudis, J. & Mercorelli, P., 31.05.2021, 22nd International Carpathian Control Conference, ICCC 2021. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. 9454654. (International Carpathian Control Conference, ICCC; no. 22).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  13. Kennlinienorientiertes Lagermanagement

    Nyhuis, P., Schmidt, M. & Wriggers, F. S., 2008, Netzwerklogistik: 13. wissenschaftliche Fachtagung, Magdeburg. Inderfurth, K., Neumann, G., Schenk, M., Wäscher, G. & Ziems, D. (eds.). LOGiSCH Verl., p. 279-293 15 p. (Magdeburger Logistik - Logistik aus technischer und ökonomischer Sicht).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  14. Published

    KI-Kanban-Behälter: Mobile, dezentrale Logistikdatenerfassung mittels Edge-ML

    Rokoss, A., Popkes, L., Kramer, K., Green, T. & Schmidt, M., 11.02.2023, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 118, 1-2, p. 59-63 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  15. Published

    Kinematic self-calibration of non-contact five-axis measuring machine using improved genetic algorithm.

    Zhigen, F., Xiaojie, X., Yanqiu, X., Meier, N. & Georgiadis, A., 02.2016, In: Measurement Science and Technology. 27, 2, 13 p., 025903.

    Research output: Journal contributions › Journal articles › Research › peer-review

  16. Published

    Kinetic damping in the admittance and impedance spectra of the spherical impedance probe

    Oberrath, J., 09.07.2017, Proceedings of the 33rd International Conference on Phenomena in Ionized Gases: Estoril, Portugal. 9-14 July 2017. Alves, L. L. & Tejero-del-Caz, A. (eds.). Universidade de Lisboa, p. 353 1 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  17. Published

    Kinetic damping in the spectra of the spherical impedance probe

    Oberrath, J., 05.04.2018, In: Plasma Sources Science and Technology. 27, 4, 16 p., 045003.

    Research output: Journal contributions › Journal articles › Research › peer-review

  18. Published

    Kinetic Damping in the Spectrum of the Spherical Impedance Probe

    Oberrath, J. & Brinkmann, R. P., 10.2015, In: Bulletin of the American Physical Society. 60, 9, 1 p.

    Research output: Journal contributions › Conference abstract in journal › Research › peer-review

  19. Published

    Kinetic modeling of active plasma resonance spectroscopy

    Oberrath, J., 10.2016, In: Bulletin of the American Physical Society. 61, 9, p. 11 1 p.

    Research output: Journal contributions › Conference abstract in journal › Research › peer-review

  20. Published

    Kinetic Spectra of the Planar Multipole Resonance Probe

    Friedrichs, M. & Oberrath, J., 09.11.2018, In: Bulletin of the American Physical Society. 2018, 1 p., TF3.00007.

    Research output: Journal contributions › Conference abstract in journal › Research › peer-review

  21. Kit based motion generator for a soft walking robot

    Schiller, L., Maruthavanan, D., Seibel, A. & Schlattmann, J., 16.11.2020, ASME 2020 International Mechanical Engineering Congress and Exposition : Volume 7A: Dynamics, Vibration, and Control: Control Theory and Applications. The American Society of Mechanical Engineers(ASME), 8 p. V07AT07A009. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7A-2020).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  22. Kompaktes induktives Energieübertragungssystem mit mehreren Spulen und passivem Spitzenspannungsdetektor für drahtlose Sensorknoten

    Bouattour, G., Kallel, B., Viehweger, C. & Kanoun, O., 01.09.2022, In: Technisches Messen. 89, 9, p. 612-624 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  23. Published

    Kompetenzorientierte Hochschullehre in den Ingenieurwissenschaften am Beispiel der theorie- und forschungsbasierten Entwicklung, der Implementierung und der Wirksamkeitsanalyse des Lehr-Lernkonzeptes "Projektmentoring"

    Block, B-M., 2012, Göttingen: Sierke Verlag. 244 p. (Schriftenreihe zur Produkt- und Prozessinnovation; no. 3)

    Research output: Books and anthologies › Monographs › Research

  24. Published

    Kompetenzorientierte Lehre in den Ingenieurwissenschaften- ein Verbundprojekt zwischen Universität und Gymnasien

    Block, B-M., 2014, In: Das Hochschulwesen. 62, 1-2, p. 24-31 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  25. Published

    Konfiguration der PPS: Der Weg von der Theorie zur Praxis

    Hillnhagen, S., Schulz, J., Mütze, A., Nyhuis, P. & Schmidt, M., 30.11.2022, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 117, 11, p. 728-732 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  26. Konstruktive Maßnahmen zur Reduzierung der Haftreibung in tribologischen Systemen

    Seibel, A., 01.07.2016, In: Konstruktion. 68, 7-8, p. 72-74 3 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  27. Published

    Kontinuierliche Gestaltung skalierbarer Produktionsstufen

    Wagner, C., 2012, Garbsen: PZH Verlag. 153 p. (Berichte aus dem IFA; vol. 2012, no. 3)

    Research output: Books and anthologies › Monographs › Research

  28. Published

    Kundenintegration durch Additive Fertigung

    Wagner, C. & Georgiadis, A., 05.2017, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 112, 5, p. 317-321 5 p.

    Research output: Journal contributions › Journal articles › Research

  29. Laser in situ keratomileusis

    Pallikaris, L. G., Papatzanaki, M. E., Stathi, E. Z., Frenschock, O. & Georgiadis, A., 01.01.1990, In: Lasers in Surgery and Medicine. 10, 5, p. 463-468 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  30. Published

    Laser Scanning Point Cloud Improvement by Implementation of RANSAC for Pipeline Inspection Application

    Sepulveda-Valdez, C., Sergiyenko, O., Alaniz-Plata, R., Nunez-Lopez, J. A., Tyrsa, V., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Mercorelli, P., Kolendovska, M., Kartashov, V., Miranda-Vega, J. E. & Murrieta-Rico, F. N., 2023, IECON 2023 - 49th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. (IECON Proceedings (Industrial Electronics Conference)).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  31. Published

    Laser shock peening process modelling and experimental validation of AA2198-T3 and AA2198-T8

    Keller, S., Kashaev, N. & Klusemann, B., 2017, In: Proceedings in applied mathematics and mechanics. 17, 1, p. 423 - 424 2 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  32. Published

    Learning Rotation Sensitive Neural Network for Deformed Objects' Detection in Fisheye Images

    Chen, Z. & Georgiadis, A., 11.2019, 2019 4th International Conference on Robotics and Automation Engineering (ICRAE 2019): November 22-24, 2019, Singapore . Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 125-129 5 p. 9043800. (International Conference on Robotics and Automation Engineering, ICRAE ; vol. 4).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  33. Lengthscale-dependent modelling of ductile failure in metallic microstructures

    Svendsen, B., Klusemann, B. & Hortig, C., 09.2010, In: International Journal of Materials and Structural Integrity. 4, 2-4, p. 141-159 19 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  34. Lightweight construction by means of profiles

    Chatti, S., Pietzka, D., Ben Khalifa, N., Jäger, A., Selvaggio, A. & Tekkaya, A. E., 2012, Material Forming ESAFORM 2012. Merklein, M. & Hagenah, H. (eds.). Trans Tech Publications, Vol. 504-506. p. 369-374 6 p. (Key Engineering Materials; vol. 504-506).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  35. Linear free vibrations with uncertain initial conditions

    Seibel, A. & Schlattmann, J., 2014, Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics. Sas, P., Moens, D. & Denayer, H. (eds.). KU Leuven, p. 4467-4480 14 p. (Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  36. Published

    Linear Generalised Model Predictive Control to Avoid Input Saturation through Matrix Conditions

    Mercorelli, P., 2017, In: WSEAS Transactions on Systems. 16, p. 313-322 10 p., 35.

    Research output: Journal contributions › Journal articles › Research › peer-review

  37. Published

    Linked Accomplishment Of Order Management And Production Planning And Control. An Integrated Model-based Approach

    Hillnhagen, S., Mütze, A., Nyhuis, P. & Schmidt, M., 2021, Conference on Production Systems and Logistics: International Conference, CPSL 2021, Digital Event hosted via publish-Ing; August 10-11, 202;1 Proceedings. Herberger, D. & Hübner, M. (eds.). Offenburg: publish-Ing., p. 688 - 698 11 p. (Proceedings of the ... Conference on Production Systems and Logistics; vol. 2).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  38. Published

    Linux-based Embedded System for Wavelet Denoising and Monitoring of sEMG Signals using an Axiomatic Seminorm

    Schimmack, M. & Mercorelli, P., 01.06.2015, In: IFAC-PapersOnLine. 48, 4, p. 278-283 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  39. Published

    Localization of Passengers Inside Intelligent Vehicles by the Use of Ultra Wideband Radars

    Galdia, P., Carsten, K. & Georgiadis, A., 2011, Signal processing, image processing and pattern recognition: international conference, SIP 2011. Kim, T., Adeli, H., Ramos, C. & Kang, B-H. (eds.). Springer, p. 92-102 11 p. (Communications in Computer and Information Science; vol. 260 CCIS).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  40. Locomotive drive control by using Haar wavelet packets

    Mercorelli, P., Terwiesch, P. & Prattichizzo, D., 2002, Open Problems on the Mathematical Theory of Systems: 2002 MTNS Problem Book, August 12-16, 2002. Blondel, V. D. & Megretski, A. (eds.). South Bend: University of Notre Dame, p. 37-40 4 p. (MTNS; vol. 2002).

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

  41. Published

    Logistical Potentials of Load Balancing via the Build-up and Reduction of Stock

    Heuer, T., Maier, J. T., Busse, T. D., Schmidt, M. & Nyhuis, P., 2021, 2021 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2021: 13 - 16 December 2021. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 264-269 6 p. (2021 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2021).

    Research output: Contributions to collected editions/works › Chapter › peer-review

  42. Logistic Operating Curves in Theory and Practice

    Schmidt, M. (ed.) & Nyhuis, P., 22.03.2011, Advances in Computer Science and Engineering. Schmidt, M. (ed.). Rijeka: InTech Open Access Publisher, p. 371-390 19 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  43. Logistikcontrolling der unternehmensinternen Lieferkette: Entwicklung eines Vorgehensmodells zur quantitativen Analyse und Bewertung der Ursachen einer geringen logistischen Performance

    Härtel, L., Schmidt, M. & Nyhuis, P., 28.04.2017, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 112, 4, p. 238-242 5 p.

    Research output: Journal contributions › Journal articles › Research

  44. Published

    Logistik-Leitstände in Industrieunternehmen

    Boos, J., Czenskowsky, T., Harland, J. & Wagner, C., 2018, In: Der Betriebswirt . 59, 2, p. 15-20 6 p., 2.

    Research output: Journal contributions › Journal articles › Transfer

  45. Logistische Kennlinien für Lagerprozesse

    Wriggers, F. S., Schmidt, M., Grapentin, J. & Nyhuis, P., 2007, In: wt Werkstattstechnik online. 97, 9, p. 657-662 6 p.

    Research output: Journal contributions › Journal articles › Research

  46. Logistische Lageranalyse und Methodenvalidierung: Projektergebnisse aus dem Elektronikwerk Amberg der Siemens AG

    Busse, T. D., Schmidt, M. & Wriggers, F. S., 2007, In: Industrie Management. 23, 5, p. 75-78 4 p.

    Research output: Journal contributions › Journal articles › Research

  47. Logistische Modelle für die Analyse innerbetrieblicher Lieferketten

    Nyhuis, P., Schmidt, M. & Becker, J., 2013, Produzieren in Deutschland - Wettbewerbsfähigkeit im 21. Jahrhundert. Friedewald, A. & Lödding, H. (eds.). Berlin: GITO mbH Verlag, p. 185-203 19 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  48. Logistische Modellierung von Lagerprozessen

    Schmidt, M. & Wriggers, F. S., 2008, Beiträge zu einer Theorie der Logistik. Nyhuis, P. (ed.). Berlin: Springer, p. 139-155 17 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research

  49. Logistisches Controlling von Montageprozessen: Ein modellbasierter Ansatz zur Effizienzsteigerung

    Schmidt, M., Münzberg, B. & Nyhuis, P., 2011, In: wt Werkstattstechnik online. 101, 9, p. 574-579 6 p.

    Research output: Journal contributions › Journal articles › Research

  50. Logistisches Montagecontrolling: Entwicklung eines Controllinginstruments zur Analyse von Montageprozessen

    Münzberg, B., Schmidt, M., Rochow, P. & Nyhuis, P., 18.12.2011, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 106, 12, p. 969-973 5 p.

    Research output: Journal contributions › Journal articles › Research

  51. Published

    Logotoaster

    Sander, H., Menge, A., Filter, J., Hillmer, T., Müller, S., Georgiadis, A. & Koch, C., 23.11.2006, IPC No. A47J 37/08, Deutsches Patent- und Markenamt, Patent No. DE102005023267A1, 20.05.2005

    Research output: Patents › Patent

  52. Low cycle fatigue properties of extruded Mg10GdxNd alloys

    Tober, G., Maier, P., Müller, S. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 115-120 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  53. Published

    Lyapunov approach for a pi-controller with anti-windup in a permanent magnet synchronous motor using chopper control

    Mercorelli, P., 2014, In: International Journal of Mathematical Models and Methods in Applied Sciences . 8, 1, p. 49-56 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  54. Published

    Lyapunov control strategy for thermoelectric cooler activating an ice-clamping system

    Mironova, A., Mercorelli, P. & Zedler, A., 01.08.2018, In: Journal of Thermal Science and Engineering Applications. 10, 4, 9 p., 041020.

    Research output: Journal contributions › Journal articles › Research › peer-review

  55. Published

    Lyapunov Convergence Analysis for Asymptotic Tracking Using Forward and Backward Euler Approximation of Discrete Differential Equations

    Mercorelli, P., 2013, In: International Journal of Pure and Applied Mathematics. 89, 5, p. 761-767 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  56. Published

    Lyapunov stability analysis to set up a PI controller for a mass flow system in case of a non-saturating input

    Mercorelli, P., 11.12.2016, In: International Journal of Pure and Applied Mathematics. 111, 2, p. 281-286 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  57. Published

    Lyapunov stability analysis to set up a saturating PI controller with anti-windup for a mass flow system

    Mercorelli, P., 06.12.2016, In: International Journal of Pure and Applied Mathematics. 111, 1, p. 121-128 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  58. Published

    Machine Learning-Supported Planning of Lead Times in Job Shop Manufacturing

    Kramer, K., Wagner, C. & Schmidt, M., 2020, Advances in Production Management Systems. The Path to Digital Transformation and Innovation of Production Management Systems - IFIP WG 5.7 International Conference, APMS 2020, Proceedings: The Path to Digital Transformation and Innovation of Production Management Systems IFIP WG 5.7 International Conference, APMS 2020 Novi Sad, Serbia, August 30 – September 3, 2020 Proceedings, Part I. Lalic, B., Marjanovic, U., Majstorovic, V., von Cieminski, G. & Romero, D. (eds.). Cham: Springer, Vol. 1. p. 363-370 8 p. (IFIP Advances in Information and Communication Technology; vol. 591 IFIP).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  59. Published

    Machine Vision and Navigation

    Sergiyenko, O. (ed.), Flores-Fuentes, W. (ed.) & Mercorelli, P. (ed.), 30.09.2019, Cham: Springer International Publishing AG. 851 p.

    Research output: Books and anthologies › Book

  60. Published

    Machine Vision Sensors: Editorial

    Sergiyenko, O., Tyrsa, V., Flores-Fuentes, W., Rodriguez-Quinonez, J. & Mercorelli, P., 27.02.2018, In: Journal of Sensors. 2018, 2 p., 3202761.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  61. Published

    Machine vision system errors for unmanned aerial vehicle navigation

    Lindner, L., Sergiyenko, O., Rivas-Lopez, M., Ivanov, M., Rodriguez-Quinonez, J. C., Hernandez-Balbuena, D., Flores-Fuentes, W., Tyrsa, V., Muerrieta-Rico, F. N. & Mercorelli, P., 03.08.2017, Proceedings: 2017 IEEE International Symposium on Industrial Electronics (ISIE). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1615-1620 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  62. Published

    Machine vision system for UAV navigation

    Lindner, L., Sergiyenko, O. Y., Rivas-Lopez, M., Valdez-Salas, B., Rodríguez-Quinonez, J. C., Hernández-Balbuena, D., Flores-Fuentes, W., Tyrsa, V., Barrera, M. M., Muerrieta-Rico, F. N., Mercorelli, P., Gurko, A. & Kartashov, V. M., 02.02.2017, 2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2016. IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. 7841356. (2016 International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles and International Transportation Electrification Conference, ESARS-ITEC 2016).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  63. Machining of hybrid reinforced Mg-MMCs using abrasive water jetting

    Aust, E., Elsäßer, M., Hort, N. & Limberg, W., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 345-349 5 p. (Magnesium Technology; vol. 2006).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  64. Macrostructure evolution in directionally solidified Mg-RE alloys

    Salgado-Ordorica, M. A., Punessen, W., Yi, S., Bohlen, J., Kainer, K. U. & Hort, N., 28.02.2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 113-118 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  65. Magnesium: An essential nutrient for a good biomaterial

    Manuel, M. V. & Hort, N., 04.2011, In: JOM: Journal of The Minerals, Metals & Materials Society. 63, 4, p. 99-99 1 p.

    Research output: Journal contributions › Comments / Debate / Reports › Research

  66. Magnesium alloy containing silver for degradable biomedical implants

    Lukáč, F., Vlček, M., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kekule, T., Szakács, G., Hort, N. & Kainer, K. U., 2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1086-1091 6 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  67. Magnesium alloys as implant materials-Principles of property design for Mg-RE alloys

    Hort, N., Huang, Y., Fechner, D., Störmer, M., Blawert, C., Witte, F., Vogt, C., Drücker, H., Willumeit, R., Kainer, K. U. & Feyerabend, F., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1714-1725 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  68. Magnesium alloys for biomedical applications

    Maier, P. & Hort, N., 05.10.2020, In: Metals. 10, 10, p. 1-3 3 p., 1328.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  69. Magnesium and Magnesium Alloys

    Sillekens, W. H. & Hort, N., 12.04.2013, Structural Materials and Processes in Transportation. Lehmhus, D., Busse, M., Herrmann, A. S. & Kayvantash, K. (eds.). Wiley-VCH Verlag, p. 113-150 38 p.

    Research output: Contributions to collected editions/works › Chapter › peer-review

  70. Magnesium-based metal matrix nanocomposites—processing and properties

    Dieringa, H. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 679-691 13 p. (Minerals, Metals and Materials Series; vol. Part F12).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  71. Magnesium melt protection

    Hort, N., Wiese, B., Dieringa, H. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 78-81 4 p. (Materials Science Forum; vol. 828-829).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  72. Magnesium (Mg) corrosion: A challenging concept for degradable implants

    Witte, F., Hort, N., Feyerabend, F. & Vogt, C., 03.2011, Corrosion of Magnesium Alloys. Song, G-L. (ed.). Elsevier Inc., p. 403-425 23 p.

    Research output: Contributions to collected editions/works › Chapter › peer-review

  73. Magnesium permanent mold Castings optimization

    Elsayed, F. R., Hort, N., Salgado-Ordorica, M. A. & Kainer, K., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 65-68 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  74. Magnesium pistons in engines: Fiction or fact?

    Hort, N., Dieringa, H. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 349-353 5 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  75. Magnesium recycling: State-of-the-Art developments, part I

    Fechner, D., Hort, N., Blawert, C., Dietzel, W. & Kainer, K. U., 07.2009, In: Light Metal Age. 67, 4, p. 42-46 5 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  76. Magnesium recycling: State-of-the-Art developments, part II

    Fechner, D., Hort, N., Blawert, C., Dietzel, W. & Kainer, K. U., 09.2009, In: Light Metal Age. 67, 5, p. 34-36 3 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  77. Magnesium recycling system prepared by permanent mould- and high pressure die casting

    Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  78. Published

    Make-by-Customer Supply Chains in der Schuhindustrie: Kundenintegration in individualisierten Massenmärkten

    Wagner, C., Decker, C. & Steblau, A., 2018, In: Fabriksoftware. 23, 3, p. 20-22 3 p., 2.

    Research output: Journal contributions › Journal articles › Transfer

  79. Manufacture of profiles with variable cross-sections, curvatures and twistings by influencing the material flow in hot extrusion

    Selvaggio, A., Ben Khalifa, N., Chatti, S. & Tekkaya, A. E., 2012, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012: Proceedings of the 14th International Conference on Metal forming. Kusiak, J. (ed.). John Wiley & Sons Ltd., Vol. SPL. ISSUE. p. 507-510 4 p. (Steel Research International; vol. 83.2012).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research

  80. Published

    Manufacturing as a challenge in Industry 4.0 process

    Mercorelli, P., Nemati, H. & Zhu, Q., 01.01.2024, Modeling, Identification, and Control for Cyber- Physical Systems Towards Industry 4.0. Mercorelli, P., Zhang, W., Nemati, H. & Zhang, Y. (eds.). Academic Press Inc., p. 15-17 3 p.

    Research output: Contributions to collected editions/works › Chapter › peer-review

  81. Manufacturing, control, and performance evaluation of a Gecko-inspired soft robot

    Schiller, L., Seibel, A. & Schlattmann, J., 10.06.2020, In: Journal of Visualized Experiments. 2020, 160, p. 1-15 15 p., e61422.

    Research output: Journal contributions › Journal articles › Research › peer-review

  82. Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen

    Salfeld, V., Matthias, T., Krimm, R., Behrens, B-A., Sieczkarek, P., Ben Khalifa, N., Tekkaya, A. E., Hetzner, H., Tremmel, S. & Wartzack, S., 13.11.2013, Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013: 2. Workshop Blechmassivumformung. Merklein, M., Behrens, B. A. & Tekkaya, A. E. (eds.). Meisenbach GmbH Verlag, p. 13-35 23 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  83. Published

    Materialbereitstellung in der Montage

    Nyhuis, P., Wiendahl, H-P. & Wagner, C., 2012, Montage in der industriellen Produktion. Lotter, B. & Wiendahl, H-P. (eds.). 2 ed. Berlin: Springer, p. 285-313 29 p.

    Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Education

  84. Material flow analysis for the incremental sheet-bulk gearing by rotating tools

    Wernicke, S., Sieczkarek, P., Grodotzki, J., Gies, S., Ben Khalifa, N. & Tekkaya, A. E., 2017, Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017 : Processes. The American Society of Mechanical Engineers, Vol. 1. V001T02A061

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  85. Materialklassifizierung unter Einbeziehung von Bedarfsprognosen

    Scholz-Reiter, B., Heger, J., Meinecke, C. & Bergmann, J., 2010, In: Productivity Management. 15, 1, p. 57-60 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  86. Materials by design: An experimental and computational investigation on the microanatomy arrangement of porous metallic glasses

    Sarac, B., Klusemann, B., Xiao, T. & Bargmann, S., 15.09.2014, In: Acta Materialia. 77, p. 411-422 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  87. Published

    Mathematical Modelling of molecular adsorption in zeolite coated frequency domain sensors

    Murrieta-Rico, F. N., Mercorelli, P., Sergiyenko, O. Y., Petranovskii, V., Hernandez-Balbuena, D. & Tyrsa, V., 01.02.2015, In: IFAC-PapersOnLine. 48, 1, p. 41-46 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

  88. Published

    Mathematische Modellierung eines Raumes zur Nutzung in einem dynamischen Cyber-Physischen System

    Papadoudis, J., 2017, 1 ed. Göttingen: Sierke Verlag. 128 p. (Schriftenreihe zur Produkt - und Prozessinnovation; vol. 9)

    Research output: Books and anthologies › Monographs › Research

  89. Measurement and calculation of the viscosity of metals - A review of the current status and developing trends

    Cheng, J., Gröbner, J., Hort, N., Kainer, K. U. & Schmid-Fetzer, R., 06.2014, In: Measurement Science and Technology. 25, 6, 062001.

    Research output: Journal contributions › Scientific review articles › Research

  90. Measurement of the Lamb shift in hydrogenic sulfur by laser spectroscopy

    Georgiadis, A. P., Müller, D., Sträter, H-D., Gassen, J., von Brentano, P., Sens, J. C. & Pape, A. J., 31.03.1986, In: Physics Letters A: General, Atomic and Solid State Physics . 115, 3, p. 108-110 3 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  91. Published

    Mecanum wheel slip detection model implemented on velocity-controlled drives

    Gilfillan, C. L., van Niekerk, T., Mercorelli, P. & Sergiyenko, O., 01.01.2024, Modeling, Identification, and Control for Cyber- Physical Systems Towards Industry 4.0. Mercorelli, P., Zhang, W., Nemati, H. & Zhang, Y. (eds.). Elsevier, p. 199-213 15 p.

    Research output: Contributions to collected editions/works › Chapter › peer-review

  92. Mechanical and corrosion properties of as-cast and extruded MG10GD alloy for biomedical application

    Maier, P., Müller, S., Dieringa, H. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S., Sillekens, W. & Neelameggham, N. (eds.). The Minerals, Metals & Materials Society, p. 253-259 7 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  93. Mechanical and corrosion properties of binary Mg-Dy alloys for medical applications

    Yang, L., Huang, Y., Peng, Q., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1827-1834 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  94. Mechanical and Corrosion Properties of Two Precipitation-Hardened Mg-Y-Nd-Gd-Dy Alloys with Small Changes in Chemical Composition

    Maier, P., Lauth, N., Mendis, C. L., Bechly, M. & Hort, N., 15.04.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 4, p. 1426-1435 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  95. Mechanical and corrosive properties of two magnesium wires: Mg4Gd and Mg6Ag

    Maier, P., Szakács, G., Wala, M. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 393-398 6 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  96. Published

    Mechanical behaviors of extruded Mg alloys with high Gd and Nd content

    Xu, Y., Wang, S., Wang, Y., Chen, L., Yang, L., Xiao, L., Yang, L. & Hort, N., 01.08.2021, In: Progress in Natural Science: Materials International. 31, 4, p. 591-598 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  97. Mechanical behaviour and corrosion performance of thin film magnesium WE alloys

    Schlüter, K., Reverey, J., Hort, N., Zamponi, C. & Quandt, E., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 286-289 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  98. Published

    Mechanical characterisation and modelling of electrospun materials for biomedical applications

    Polak, K., Georgiadis, A. & Heikkila, P., 2015, 2015 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2015 - Proceedings. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 507-511 5 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  99. Published

    Mechanical characterization of as-cast AA7075/6060 and CuSn6/Cu99.5 compounds using an experimental and numerical push-out test

    Greß, T., Stahl, J., Mittler, T., Spano, L., Chen, H., Ben Khalifa, N. & Volk, W., 28.03.2019, In: Materials Science & Engineering A. 751, p. 214-225 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  100. Published

    Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding

    Yamin, M. F., Awang, M., Suhuddin, U. F. H., Sallih, N., Klusemann, B. & dos Santos, J. F., 01.06.2020, In: Materialwissenschaft und Werkstofftechnik. 51, 6, p. 830-835 6 p.

    Research output: Journal contributions › Conference article in journal › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...17 Next

Recently viewed