Browse by research area

  1. Introducing parametric uncertainty into a nonlinear friction model

    Seibel, A. & Schlattmann, J., 12.2014, In: PAMM. 14, 1, p. 285-286 2 p.

    Research output: Journal contributionsConference abstract in journalResearchpeer-review

  2. Intramedullary Mg2Ag nails augment callus formation during fracture healing in mice

    Jähn, K., Saito, H., Taipaleenmäki, H., Gasser, A., Hort, N., Feyerabend, F., Schlüter, H., Rueger, J. M., Lehmann, W., Willumeit-Römer, R. & Hesse, E., 01.05.2016, In: Acta Biomaterialia. 36, p. 350-360 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  3. Published

    Internal forces in robotic manipulation and in general mechanisms using a geometric approach

    Mercorelli, P., 2012, In: International Journal of Pure and Applied Mathematics. 79, 2, p. 293-301 9 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  4. Intermetallics in magnesium alloys

    Hort, N., Huong, Y. & Kainer, K. U., 01.04.2006, In: Advanced Engineering Materials. 8, 4, p. 235-240 6 p.

    Research output: Journal contributionsScientific review articlesResearch

  5. Intermetallic phase characteristics in the Mg–Nd–Zn system

    Tolnai, D., Hill, S. A., Gavras, S., Subroto, T., Buzolin, R. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 391-397 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  6. Interference of magnesium corrosion with tetrazolium-based cytotoxicity assays

    Fischer, J., Prosenc, M. H., Wolff, M., Hort, N., Willumeit, R. & Feyerabend, F., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1813-1823 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  7. Published

    Interdisciplinary engineering education in the context of digitalization and global transformation prozesses.

    Block, B-M., Haus, B., Stenken, A. & von Geyso, T., 11.2020, Engaging Engineering Education : Books of Abstracts - SEFI 48th Annual Conference Proceedings. Veen, J. V. D., Hattum-Janssen, N. V., Järvinen, H-M., Leat, T. D. & Dam, I. T. (eds.). Enschede : European Society for Engineering Education (SEFI), p. 617-627 11 p. (SEFI 48th Annual Conference Engaging Engineering Education, Proceedings).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  8. Published

    Interdiffusion and atomic mobility in hcp Mg–Al–Sn alloys

    Zhang, Y., Du, C., Liu, Y., Wen, S., Liu, S., Huang, Y., Hort, N. & Du, Y., 05.08.2021, In: Journal of Alloys and Compounds. 871, 11 p., 159517.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  9. Published

    Intelligent software system for replacing a force sensor in the case of clearance measurement

    Meier, N., Papadoudis, J. & Georgiadis, A., 13.03.2019, In: Procedia CIRP. 79, p. 517-522 6 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  10. Published

    Intelligent Diagnostics of Radial Internal Clearance in Ball Bearings with Machine Learning Methods

    Ambrożkiewicz, B., Syta, A., Georgiadis, A., Gassner, A., Litak, G. & Meier, N., 25.06.2023, In: Sensors. 23, 13, 16 p., 5875.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  11. Integrierte Simulationsmethodik zur Investitionsbewertung von Mikroproduktionssystemen

    Scholz-Reiter, B., Lütjen, M. & Heger, J., 2007, Kolloquium Mikroproduktion - Fortschritte, Verfahren, Anwendungen: Eine Kooperation der Sonderforschungsbereiche 440, 499, 516 und 747. Universität Karlsruhe, p. 237-242 6 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  12. Published

    Integration of laboratory experiments into introductory electrical engineering courses: concept, implementation and competence-based evaluation

    Block, B-M., 2014, 2014 IEEE Global Engineering Education Conference: Engineering Education Towards Openness and Sustainability, IEEE EDUCON 2014. I. O. E. A. E. E. & B. U. (eds.). IEEE - Institute of Electrical and Electronics Engineers Inc., p. 23-29 7 p. 6826062. (IEEE Global Engineering Education Conference, EDUCON).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  13. Published

    Integrating a piezoelectric actuator with mechanical and hydraulic devices to control camless engines

    Mercorelli, P. & Werner, N., 01.10.2016, In: Mechanical Systems and Signal Processing. 78, p. 55-70 16 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  14. Integrated simulation method for investment decisions of micro production systems

    Scholz-Reiter, B., Lütjen, M. & Heger, J., 11.2008, In: Microsystem Technologies. 14, 12, p. 2001-2005 5 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  15. Integrated curvature sensing of soft bending actuators using inertial measurement units

    Seibel, A. & Schiller, L., 09.11.2018, ASME 2018 International Mechanical Engineering Congress and Exposition : Volume 9: Mechanics of Solids, Structures, and Fluids. The American Society of Mechanical Engineers (ASME), 6 p. V009T12A034. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  16. Integrated Concept for the Selection of Process-improving and Competence-increasing Methods for the Shopfloor

    Bellmann, V. K. & Schmidt, M., 01.10.2016, In: Universal Journal of Management. 4, 10, p. 587-592 6 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  17. In situ tensile texture analysis of a new Mg-RE alloy

    Gan, W. M., Huang, Y. D., Xu, Y. L., Hofmann, M., Kainer, K. U. & Hort, N., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 779-783 5 p. (Materials Science Forum; vol. 879).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  18. Published

    In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

    Tolnai, D., Gavras, S., Stark, A., Bartosch, M., Witte, F. & Hort, N., 01.01.2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 143-148 6 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  19. In situ synchrotron radiation diffraction study of the role of Gd, Nd on the elevated temperature compression behavior of ZK40

    Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 29.07.2015, In: Materials Science and Engineering A. 640, p. 129-136 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  20. In situ synchrotron radiation diffraction investigation of the compression behaviour at 350 °C of ZK40 alloys with addition of CaO and Y

    Buzolin, R. H., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 10.05.2016, In: Materials Science and Engineering A. 664, p. 2-9 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  21. In situ synchrotron radiation diffraction during solidification of Mgl5Gd: Effect of cooling rate

    Szakács, G., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, K. U., Grobner, J., Schmid-Fetzer, R. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 79-84 6 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  22. In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)

    Szakacs, G., Wiese, B., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Naira, M., Kainer, K. U. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 213-218 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  23. In situ synchrotron radiation diffraction during melting and solidification of Mg-Al alloys containing CaO

    Wiese, B., Mendis, C. L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H. P., Bruckner, R., Kainer, K. U. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 191-195 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  24. In-situ synchrotron investigation of the phasesand their morphology-development in Mg-Nd-Zn alloys

    Tolnai, D., Sosro, T., Gavras, S., Buzolin, R. H. & Hort, N., 01.2020, In: International Journal of Materials Research. 111, 1, p. 4-10 7 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  25. In situ synchrotron diffraction of the solidification of Mg-RE alloys

    Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 253-257 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  26. In situ synchrotron diffraction of the solidification of Mg4Y3Nd

    Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 07.2013, In: Materials Letters. 102-103, p. 62-64 3 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  27. In situ studies of light metals with synchrotron radiation and neutrons

    Staron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M., Hort, N., Eckerlebe, H., Kainer, K. U., Müller, M. & Schreyer, A., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 192-197 6 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  28. In situ investigation of microstructure evolution during solidification of Mg10CaxGd (x = 5, 10, 20) alloys

    Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 01.10.2015, In: Acta Physica Polonica A. 128, 4, p. 606-610 5 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  29. In situ compressive investigations on the effects of solid solution Gd on the texture and lattice strain evolution of Mg

    Xu, Y., Huang, Y., Zhong, Z., You, S., Gan, W., Xiao, B., Maawad, E., Schell, N., Gensch, F., Pan, F. & Hort, N., 13.02.2020, In: Materials Science and Engineering A. 774, 138938.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  30. Published

    Insights into creep behavior of Mg–14Gd–1Zn–0.4Zr (wt.%) alloy containing β- and γ-type precipitates

    Shi, H., Yang, L., Huang, Y., Zhou, S., Wang, K., Liu, C., Gavras, S., Xiao, L., Willumeit-Römer, R., Dieringa, H. & Hort, N., 01.02.2024, In: Materials Science and Engineering: A. 893, 10 p., 146065.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  31. Published

    Input-Output Linearization of a Thermoelectric Cooler for an Ice Clamping System Using a Dual Extended Kalman Filter

    Van Rossum, F., Haus, B., Mercorelli, P. & Aschemann, H., 2023, 2023 27th International Conference on Methods and Models in Automation and Robotics, MMAR 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 199-204 6 p. (International Conference on Methods and Models in Automation and Robotics).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  32. Innovative hybrid process in metal forming

    Jäger, A., Selvaggio, A., Hänisch, S., Haase, M., Becker, C., Kolbe, J., Ben Khalifa, N. & Tekkaya, A. E., 2013, North American Manufacturing Research Conference 2013. North American Manufacturing Research Institute of SME, Vol. 41. p. 205-214 10 p. (Transactions of the North American Manufacturing Research Institution of SME).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  33. Published

    Innovation in Continuing Engineering Education with focus on gender and non-traditional students' pathways

    Block, B. M., 2017, SEFI Annual Conference 2017: 18-21 September 2017, Azores, Portugal; Proceedings; Education Excellence for Sustainability. Bernardino, J., Rocha, J. & Quadrado, J. C. (eds.). European Society for Engineering Education, p. 276-283 8 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  34. Innovation by forming technology: Motivation for research

    Brosius, A., Hermes, M., Ben Khalifa, N., Trompeter, M. & Tekkaya, A. E., 01.08.2009, In: International Journal of Material Forming. 2, SUPPL. 1, p. 29-38 10 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  35. Inherent and induced anisotropic finite visco-plasticity with applications to the forming of DC06 sheets

    Behrouzi, A., Soyarslan, C., Klusemann, B. & Bargmann, S., 12.2014, In: International Journal of Mechanical Sciences. 89, p. 101-111 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  36. Published

    Influencing Parameters in the Deep Drawing of Fiber Metal Laminates with Low Viscous Matrix

    Kruse, M. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 2: ICTP 2023. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer, Vol. 2. p. 124-134 11 p. (Lecture Notes in Mechanical Engineering (LNME)).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  37. Influences of yttrium content on microstructure and mechanical properties of as-cast Mg–Ca–Y–Zr alloys

    You, S., Huang, Y., Kainer, K. U. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 91-97 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  38. Influences of Y additions on the hot tearing susceptibility of Mg-1.5wt.%Zn alloys

    Wang, Z., Huang, Y. D., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 306-310 5 p. (Materials Science Forum; vol. 765).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  39. Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn Alloys

    Huang, Y., Gu, J., You, S., Kainer, K. U. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 331-338 8 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  40. Published

    Influences of RVE topology, discretization and boundary conditions in practical multiscaling - a comparison

    Schneider, K., Klusemann, B. & Bargmann, S., 2016, Book of Abstract for Joint Annual Meeting of GAMM and DMV: March 7-11, 2016; Braunschweig, Germany. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 175 1 p.

    Research output: Contributions to collected editions/worksPublished abstract in conference proceedingsResearchpeer-review

  41. Influences of AlN/Al Nanoparticles on the Creep Properties of Elektron21 Prepared by High Shear Dispersion Technology

    Yang, H., Huang, Y., Gavras, S., Kainer, K. U., Hort, N. & Dieringa, H., 15.07.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 7, p. 2245-2252 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  42. Influence of Ultrasound on Friction Induced Vibrations during Tightening of Bolted Joints

    Baramsky, N., Seibel, A. & Schlattmann, J., 01.12.2017, In: PAMM. 17, 1, p. 361-362 2 p.

    Research output: Journal contributionsConference abstract in journalResearchpeer-review

  43. Influence of Torsion on Precipitation and Hardening Effects during Aging of an Extruded AZ91 Alloy

    Song, B., Liu, T., Xin, R., Yang, H., Guo, N., Chai, L., Huang, Y. & Hort, N., 15.07.2019, In: Journal of Materials Engineering and Performance. 28, 7, p. 4403-4414 12 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  44. Published

    Influence of the pandemic dissemination of COVID-19 on radiotherapy practice: A flash survey in Germany, Austria and Switzerland

    Reuter-Oppermann, M., Müller-Polyzou, R., Wirtz, H. & Georgiadis, A., 21.05.2020, In: PLoS ONE. 15, 5, 17 p., e0233330.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  45. Influence of the Microstructure and Silver Content on Degradation, Cytocompatibility, and Antibacterial Properties of Magnesium-Silver Alloys in Vitro

    Liu, Z., Schade, R., Luthringer, B., Hort, N., Rothe, H., Müller, S., Liefeith, K., Willumeit-Römer, R. & Feyerabend, F., 22.06.2017, In: Oxidative Medicine and Cellular Longevity. 2017, 14 p., 8091265.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  46. Published

    Influence of the amount of intermetallics on the degradation of Mg-Nd alloys under physiological conditions

    Zhang, Y., Huang, Y., Feyerabend, F., Blawert, C., Gan, W., Maawad, E., You, S., Gavras, S., Scharnagl, N., Bode, J., Vogt, C., Zander, D., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 01.02.2021, In: Acta Biomaterialia. 121, p. 695-712 18 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  47. Influence of strontium, silicon and calcium additions on the properties of the AM50 alloy

    Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 459-462 4 p. (Materials Science Forum; vol. 618 619).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  48. Influence of Solution Heat Treatment on the Microstructure, Hardness and Stress Corrosion Behavior of Extruded Resoloy®

    Maier, P., Steinacker, A., Clausius, B. & Hort, N., 01.05.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 5, p. 1870-1879 10 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  49. Published

    Influence of Process Parameters and Die Design on the Microstructure and Texture Development of Direct Extruded Magnesium Flat Products

    Nienaber, M., Safieh, N., Bohlen, J. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 511-521 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  50. Influence of Precipitation Hardening in Mg-Y-Nd on Mechanical and Corrosion Properties

    Maier, P., Peters, R., Mendis, C. L., Müller, S. M. & Hort, N., 01.04.2016, In: JOM: Journal of The Minerals, Metals & Materials Society. 68, 4, p. 1183-1190 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  51. Influence of Nd in extruded Mg10Gd base alloys on fatigue strength

    Maier, P., Tober, G., Mendis, C. L., Müller, S. & Hort, N., 23.05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 419-424 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  52. Published

    Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits

    Ehrich, J., Roos, A., Klusemann, B. & Hanke, S., 05.07.2021, In: Materials Science and Engineering A. 819, 141407.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  53. Published

    Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study

    Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.

    Research output: Journal contributionsJournal articlesResearch

  54. Published

    Influence of kinetic effects on the spectrum of a parallel electrode probe

    Oberrath, J. & Brinkmann, R. P., 12.2016, In: Plasma Sources Science and Technology. 25, 6, p. 1-16 16 p., 065020.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  55. Published

    Influence of ISO 9001 on the configuration of production planning and control

    Hillnhagen, S., Mütze, A., Nyhuis, P. & Schmidt, M., 01.01.2023, In: Procedia CIRP. 120, p. 1292-1296 5 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  56. E-pub ahead of print

    Influence of implant base material on secondary bone healing: an in silico study

    Nayak, G. S., Roland, M., Wiese, B., Hort, N. & Diebels, S., 13.04.2024, (E-pub ahead of print) In: Computer Methods in Biomechanics and Biomedical Engineering. 9 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  57. Influence of heat treatment on microstructure of hot extruded AZ31

    Dzwonczyk, J., Bohlen, J., Hort, N. & Kainer, K. U., 01.03.2003, In: Materials Science Forum. 419-422, I, p. 297-302 6 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  58. Published

    Influence of Extrusion Rate on Microstructure and Mechanical Properties of Magnesium Alloy AM60 and an AM60-Based Metal Matrix Nanocomposite

    Giannopoulou, D., Bohlen, J., Ben Khalifa, N. & Dieringa, H., 04.08.2022, In: Nanomaterials. 12, 15, 12 p., 2682.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  59. Published

    Influence of Equal-Channel Angular Pressing on the Microstructure and Texture of Mg-Zn-Y-Zr-RE Alloy Sheets

    Böhm, V., Gruber, M., Abele, E., Steinbauer, C., Victoria-Hernández, J., Letzig, D., Ben Khalifa, N. & Volk, W., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 456-466 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  60. Influence of Dy in solid solution on the degradation behavior of binary Mg-Dy alloys in cell culture medium

    Yang, L., Ma, L., Huang, Y., Feyerabend, F., Blawert, C., Höche, D., Willumeit-Römer, R., Zhang, E., Kainer, K. U. & Hort, N., 01.06.2017, In: Materials Science and Engineering C. 75, p. 1351-1358 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  61. Published

    Influence of data clouds fusion from 3D real-time vision system on robotic group dead reckoning in unknown terrain

    Ivanov, M., Sergyienko, O., Tyrsa, V., Lindner, L., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Hernandez, W. & Mercorelli, P., 01.03.2020, In: IEEE/CAA Journal of Automatica Sinica. 7, 2, p. 368-385 18 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  62. Influence of composition on hot tearing in binary mg-zn alloys

    Zhou, L., Huang, Y. D., Mao, P. L., Kainer, K. U., Liu, Z. & Hort, N., 08.2011, In: International Journal of Cast Metals Research. 24, 3-4, p. 170-176 7 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  63. Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91

    Zander, D., Heilig, M., Hort, N., Klaus, G., B̈hrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 381-384 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  64. Influence of cerium on stress corrosion cracking in AZ91D

    Heilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 305-309 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  65. Influence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloy

    Mert, F., Blawert, C., Kainer, K. U. & Hort, N., 12.2012, In: Corrosion Science. 65, p. 145-151 7 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  66. Influence of Ce addition on microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy

    Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 01.2013, In: Transactions of Nonferrous Metals Society of China (English Edition). 23, 1, p. 66-72 7 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  67. Influence of carbon nanoparticle modification on the mechanical and electrical properties of epoxy in small volumes

    Leopold, C., Augustin, T., Schwebler, T., Lehmann, J., Liebig, W. V. & Fiedler, B., 15.11.2017, In: Journal of Colloid and Interface Science. 506, p. 620-632 13 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  68. Influence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg-Dy alloys

    Yang, L., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K. U. & Hort, N., 09.2012, In: Journal of the Mechanical Behavior of Biomedical Materials. 13, p. 36-44 9 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  69. Published

    Industry 4.0 more than a challenge in modeling, identification, and control for cyber-physical systems

    Mercorelli, P., Nemati, H. & Zhu, Q., 01.01.2024, Modeling, Identification, and Control for Cyber- Physical Systems Towards Industry 4.0. Mercorelli, P., Zhang, W., Nemati, H. & Zhang, Y. (eds.). Elsevier, p. 1-14 14 p.

    Research output: Contributions to collected editions/worksChapterpeer-review

  70. Industrial applications using wavelet packets for gross error detection

    Mercorelli, P. & Frick, A., 01.01.2007, Computational Intelligence in Information Assurance and Security. Nedjah, N., Macedo Mourelle, L. & Abraham, A. (eds.). Berlin, Heidelberg: Springer, p. 89-127 39 p. (Studies in Computational Intelligence; vol. 57).

    Research output: Contributions to collected editions/worksContributions to collected editions/anthologiesResearchpeer-review

  71. Published

    Industrial Application Study and Development of a Control Strategy for an Ice Clamping Device

    Mironova, A., 05.07.2018, 1 ed. Göttingen: Sierke Verlag. 167 p.

    Research output: Books and anthologiesMonographsResearchpeer-review

  72. Published

    Individual Scans Fusion in Virtual Knowledge Base for Navigation of Mobile Robotic Group with 3D TVS

    Ivanov, M., Sergiyenko, O., Tyrsa, V. V., Mercorelli, P., Kartashov, V. M., Hernandez, W., Sheiko, S. & Kolendovska, M., 26.12.2018, IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society: Proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 3187-3192 6 p. 8591442. (Proceedings: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  73. Published

    Incremental sheet forming with active medium

    Ben Khalifa, N. & Thiery, S., 2019, In: CIRP Annals - Manufacturing Technology. 68, 1, p. 313-316 4 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  74. Incremental analysis of springback and kinematic hardening by the variation of tension during deep drawing

    ul Hassan, H., Güner, A., Khalifa, N. B. & Tekkaya, A. E., 2013, In: AIP Conference Proceedings. 1567, 1, p. 709-712 4 p.

    Research output: Journal contributionsConference article in journalResearch

  75. Increased productivity in hot aluminum extrusion by using extrusion dies with inner cooling channels manufactured by rapid tooling

    Hölker, R., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, Material Forming ESAFORM 2014: 17th Conference of the European Scientific Association on Material Forming. Larkiola, J. (ed.). Trans Tech Publications, Vol. 611-612. p. 981-988 8 p. (Key Engineering Materials; vol. 611-612).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  76. Published

    Improving the surface quality of AlMgSi1 alloy with the selection of the appropriate vibration grinding stones

    Engler, C., Georgiadis, A., Lange, D. & Meier, N., 12.2024, In: Journal of Engineering and Applied Science. 71, 1, 20 p., 35.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  77. Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP)

    Haase, M., Ben Khalifa, N., Tekkaya, A. E. & Misiolek, W. Z., 30.03.2012, In: Materials Science & Engineering A. 539, p. 194-204 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  78. Published

    Improved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot welding

    Fu, B., Shen, J., Suhuddin, U. F. H. R., Chen, T., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.10.2021, In: Scripta Materialia. 203, 6 p., 114113.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  79. Improved cytotoxicity testing of magnesium materials

    Fischer, J., Pröfrock, D., Hort, N., Willumeit, R. & Feyerabend, F., 25.06.2011, In: Materials Science and Engineering: B. 176, 11, p. 830-834 5 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  80. Published

    Improve a 3D distance measurement accuracy in stereo vision systems using optimization methods’ approach

    Rodríguez-Quiñonez, J. C., Sergiyenko, O., Flores-Fuentes, W., Rivas-lopez, M., Hernandez-Balbuena, D., Rascón, R. & Mercorelli, P., 01.05.2017, In: Opto-electronics Review. 25, 1, p. 24-32 9 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  81. Published

    Implemented Wavelet Packet Tree based Denoising Algorithm in Bus Signals of a Wearable Sensorarray

    Schimmack, M., Nguyen, S. & Mercorelli, P., 19.11.2015, In: Journal of Physics: Conference Series. 659, 1, 9 p., 012021.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  82. Published

    Image compression based on periodic principal components

    Hernandez, W., Mendez, A., Quezada-Sarmiento, P. A., Jumbo-Flores, L. A., Mercorelli, P., Tyrsa, V., Acosta-Vargas, P., Camejo, I. M., Muñoz Cagua, J. R. & Cevallos Cevallos, W. B., 01.10.2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 5634-5641 8 p. 8926747. (IECON Proceedings (Industrial Electronics Conference); vol. 2019-October).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  83. Published

    IEA SHC Task 42 / ECES Annex 29 WG A1: Engineering and Processing of PCMs, TCMs and Sorption Materials

    Ristić, A., Furbo, S., Moser, C., Schranzhofer, H., Lazaro, A., Delgado, M., Peñalosa, C., Zalewski, L., Diarce, G., Alkan, C., Gunasekara, S. N., Haussmann, T., Gschwander, S., Rathgeber, C., Schmit, H., Barreneche, C., Cabeza, L., Ferrer, G., Konuklu, Y., Paksoy, H., Rammelberg, H., Munz, G., Herzog, T., Jänchen, J. & Barrio, E. P. D., 01.06.2016, In: Energy Procedia. 91, p. 207-217 11 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  84. Published

    Identifying user assistance systems for radiotherapy to increase efficiency and help saving lives

    Müller-Polyzou, R., Reuter-Oppermann, D. M., Engbert, A. & Schmidt, R., 02.10.2021, In: Health Systems. 10, 4, p. 318-336 19 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  85. Identification of unexpected hydrides in Mg-20 wt% Dy alloy by high-brilliance synchrotron radiation

    Gan, W., Huang, Y., Yang, L., Kainer, K. U., Jiang, M., Brokmeier, H. G. & Hort, N., 02.2012, In: Journal of Applied Crystallography. 45, 1, p. 17-21 5 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  86. Published

    Identification of Parameters and States in PMSMs

    Mercorelli, P., 11.06.2023, In: Electronics (Switzerland). 12, 12, 15 p., 2625.

    Research output: Journal contributionsScientific review articlesResearch

  87. Published

    Identification of multi-fault in rotor-bearing system using spectral kurtosis and EEMD

    Gong, X., Du, W., Georgiadis, A. & Zhao, B., 15.11.2017, In: Journal of Vibroengineering. 19, 7, p. 5036-5046 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  88. Published

    Identification of conductive fiber parameters with transcutaneous electrical nerve stimulation signal using RLS algorithm

    Schimmack, M. & Mercorelli, P., 01.09.2015, In: IFAC-PapersOnLine. 48, 20, p. 389-394 6 p.

    Research output: Journal contributionsConference article in journalResearchpeer-review

  89. Identification and description of intermetallic compounds in Mg-Si-Sr cast and heat-treated alloys

    Gil-Santos, A., Moelans, N., Hort, N. & Van Der Biest, O., 05.06.2016, In: Journal of Alloys and Compounds. 669, p. 123-133 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  90. Published

    Ideelle biegedrillknicklasten von seitlich am obergurt gestützten brettschichtträgern

    Eilering, S., 11.2006, In: Bauingenieur. 81, 11, p. 488-495 8 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  91. Published
  92. ICEB 2011: International conference on extrusion and benchmark

    Donati, L., Tomesani, L., Ben Khalifa, N. & Tekkaya, A. E., 2011, In: Light Metal Age. 69, 2

    Research output: Journal contributionsJournal articlesResearch

  93. Published

    Hysteresis compensation in a piezo-hydraulic actuator using heuristic phase correction of periodic trajectories

    Haus, B., Mercorelli, P. & Werner, N., 21.12.2016, Proceedings of the IECON 2016 - 42nd Annual Conference of the Industrial Electronics Society. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 565-570 6 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  94. Published

    Hysteresis Analysis and Control of a Metal-Polymer Hybrid Soft Actuator

    Schimmack, M., Feistauer, E. E., Amancio-Filho, S. T. & Mercorelli, P., 08.04.2017, In: Energies. 10, 4, 20 p., 508.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  95. Published

    Hydrograph analysis and basef low separation

    Aksoy, H., Wittenberg, H. & Eris, E., 01.01.2014, Handbook of Engineering Hydrology: Fundamentals and Applications. Eslamian, S. (ed.). CRC Press, p. 311-328 18 p.

    Research output: Contributions to collected editions/worksChapterpeer-review

  96. Published

    Hybrid modelling by machine learning corrections of analytical model predictions towards high-fidelity simulation solutions

    Bock, F. E., Keller, S., Huber, N. & Klusemann, B., 10.04.2021, In: Materials. 14, 8, 19 p., 1883.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  97. Published

    Hybrid Hydraulic Piezo Actuator and its Control for Camless Internal Combustion Engines

    Mercorelli, P., Werner, N., Becker, U. & Harndorf, H., 2012, 7th International Conference on Integrated Power Electronics Systems (CIPS), 2012 : 7th International Conference on Integrated Power Electronics Systems ; proceedings ; March, 6 - 8, 2012 Nuremberg/Germany. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 189-194 6 p. 6170683. (ETG-Fachbericht; vol. 133).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  98. Published

    How alloying and processing effects can influence the microstructure and mechanical properties of directly extruded thin zinc wires

    Nienaber, M., Bramkamp, S., Ben Khalifa, N. & Bohlen, J., 07.2024, In: Materials Science and Engineering: A. 905, 12 p., 146720.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  99. Hot working parameters and mechanisms in as-cast Mg-3Sn-1Ca alloy

    Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 15.10.2008, In: Materials Letters. 62, 26, p. 4207-4209 3 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

  100. Hot working mechanisms and texture development in Mg-3Sn-2Ca-0.4Al alloy

    Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 15.10.2012, In: Materials Chemistry and Physics. 136, 2-3, p. 1081-1091 11 p.

    Research output: Journal contributionsJournal articlesResearchpeer-review

Previous 1...5 6 7 8 9 10 11 12 ...17 Next