Browse by research area

  1. Magnesium pistons in engines: Fiction or fact?

    Hort, N., Dieringa, H. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 349-353 5 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  2. Magnesium recycling system prepared by permanent mould- and high pressure die casting

    Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  3. Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen

    Salfeld, V., Matthias, T., Krimm, R., Behrens, B-A., Sieczkarek, P., Ben Khalifa, N., Tekkaya, A. E., Hetzner, H., Tremmel, S. & Wartzack, S., 13.11.2013, Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013: 2. Workshop Blechmassivumformung. Merklein, M., Behrens, B. A. & Tekkaya, A. E. (eds.). Meisenbach GmbH Verlag, p. 13-35 23 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  4. Material flow analysis for the incremental sheet-bulk gearing by rotating tools

    Wernicke, S., Sieczkarek, P., Grodotzki, J., Gies, S., Ben Khalifa, N. & Tekkaya, A. E., 2017, Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017 : Processes. The American Society of Mechanical Engineers, Vol. 1. V001T02A061

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  5. Mechanical and corrosion properties of as-cast and extruded MG10GD alloy for biomedical application

    Maier, P., Müller, S., Dieringa, H. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S., Sillekens, W. & Neelameggham, N. (eds.). The Minerals, Metals & Materials Society, p. 253-259 7 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  6. Mechanical and corrosive properties of two magnesium wires: Mg4Gd and Mg6Ag

    Maier, P., Szakács, G., Wala, M. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 393-398 6 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  7. Mechanical behaviour and corrosion performance of thin film magnesium WE alloys

    Schlüter, K., Reverey, J., Hort, N., Zamponi, C. & Quandt, E., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 286-289 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  8. Published

    Mechanical characterisation and modelling of electrospun materials for biomedical applications

    Polak, K., Georgiadis, A. & Heikkila, P., 2015, 2015 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2015 - Proceedings. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 507-511 5 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  9. Mechanical properties and microstructures of nano SiC reinforced ZE10 composites prepared with ultrasonic vibration

    Song, J. F., Dieringa, H., Huang, Y. D., Gan, W. M., Kainer, K. U. & Hort, N., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1019).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  10. Metallography of Mg Alloys

    Hort, N., Floss, V., Gavras, S., Wiese, G. & Tolnai, D., 2019, Magnesium Technology 2019. Neelameggham, N. R., Jordon, J. B., Joshi, V. V. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 267-276 10 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  11. Published

    Metal-Polymer Hybrid Embroidered Microwave Multiresonator for High-Frequency Sensing: Modelling, Simulation, and Experimental Analysis

    Schimmack, M., Taute, W. & Höft, M., 20.11.2018, 2018 48th European Microwave Conference, EuMC 2018. IEEE Xplore: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 495-498 4 p. 8541718. (2018 48th European Microwave Conference, EuMC 2018).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  12. Published

    Metastable–Stable

    Hort, N., 02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 11-13 3 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  13. Published

    Method of Artificial Vision in Guide Cane for Visually Impaired People

    Medina-Madrazo, L. D., Rodríguez-Quiñonez, J. C., Real-Moreno, O., Ortiz-Villaseñor, D., Flores-Fuentes, W., Sergiyenko, O., Castro-Toscano, M. J. & Mercorelli, P., 19.06.2023, 2023 IEEE 32nd International Symposium on Industrial Electronics, ISIE 2023 : Proceedings. Piscataway: Institute of Electrical and Electronics Engineers Inc., 6 p. (IEEE International Symposium on Industrial Electronics; vol. 2023-June).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  14. Methodological support for the selection of simplified equations of state for modeling technical fluids

    Schimanowski, A., Seibel, A. & Schlattmann, J., 03.11.2017, ASME 2017 International Mechanical Engineering Congress and Exposition: Volume 11: Systems, Design, and Complexity. The American Society of Mechanical Engineers(ASME), 9 p. V011T15A027. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 11).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  15. Methodology for Integrating Biomimetic Beams in Abstracted Topology Optimization Results

    Röver, T., Lau, R. J., Lange, F., Struve, A., Fuchs, C., Bartsch, K., Seibel, A. & Emmelmann, C., 30.10.2022, Proceedings of ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022): Volume 4: Biomedical and Biotechnology; Design, Systems, and Complexity. New York: The American Society of Mechanical Engineers(ASME), 7 p. IMECE2022-94299, V004T06A012. (Proceedings of ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022); vol. 4).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  16. Mg alloys: Challenges and achievements in controlling performance, and future application perspectives

    Dieringa, H., Hort, N., Letzig, D., Bohlen, J., Höche, D., Blawert, C., Zheludkevich, M. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 3-14 12 p. (Minerals, Metals and Materials Series; vol. Part F7).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  17. Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processing

    Pinheiro, G., Santos, J. D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 191-196 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  18. Microstructural approaches of engineering materials: Influences of Dy content and heat treatments on the formation of hydrides in Mg-Dy alloys

    Huang, Y., Yang, L., Wang, Z., Kainer, K. U. & Hort, N., 2013, Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013. University of Patras, p. 971-980 10 p. (Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  19. Microstructural development in tension and compression creep of magnesium alloy AE42

    Dieringa, H., Bowles, A., Hort, N. & Kainer, K. U., 15.04.2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. Pokluda, J. (ed.). Trans Tech Publications Ltd, p. 271-274 4 p. (Materials Science Forum; vol. 482).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  20. Microstructural investigations of MG-AL alloys containing small amount of SiC nucleants

    Huang, Y., Hort, N., Anopuo, O., Kainer, K. U., Vidrich, G., Schiffl, A. & Liu, Y., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 421-426 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  21. Microstructural investigations of the Mg-Sn and Mg-Sn-Al alloy systems

    Bewies, A. L., Blawert, C., Hort, N. & Kainer, K. U., 2004, Magnesium Technology 2004. Luo, A. A. (ed.). The Minerals, Metals & Materials Society, p. 307-310 4 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  22. Microstructure and compression creep strength of the newly developed magnesium alloy DieMag422

    Dieringa, H., Hort, N. & Kainer, K. U., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 177-183 7 p. (Advanced Materials Research; vol. 1019).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  23. Microstructure and corrosion of AZ91 with small amounts of cerium

    Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Grbbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 187-191 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  24. Microstructure and creep properties of MEZ magnesium alloy processed by thixocasting

    Morales Garza, E. D., Dieringa, H., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). Cham: Springer Schweiz, p. 385-389 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  25. Published

    Microstructure and Fracture Toughness of an Extruded Mg-Dy-Nd-Zn-Zr Alloy Influenced by Heat Treatment

    Maier, P., Clausius, B., Joy, C., Menze, R., Bittner, B. & Hort, N., 2021, Magnesium Technology 2021. Miller, V. M., Maier, P., Jordon, J. B. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 19-26 8 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  26. Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce

    Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 149-154 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  27. Microstructure and mechanical properties of mg-gd alloys as biodegradable implant materials

    Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 253-262 10 p. (Minerals, Metals and Materials Series; vol. Part F12).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  28. Microstructure and properties of magnesium alloy Mg-1Zn-1Ca (Zx11)

    Katsarou, L., Suresh, K., Rao, K. P., Hort, N., Blawert, C., Mendis, C. L. & Dieringa, H., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 419-423 5 p. (Magnesium Technology; vol. 01/2015).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  29. Microstructure and thermal response of Mg-Sn alloys

    Anopuo, O., Huang, Y., Blawert, C., Hort, N. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 529-534 6 p. (Magnesium Technology; vol. 2006).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  30. Microstructure, corrosion and creep of as-cast magnesium alloys Mg-2Sn-2Ca and Mg-4Sn-2Ca

    Abu Leil, T., Rao, K. P., Hort, N., Huang, Y., Blawert, C., Dieringa, H. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 257-262 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  31. Microstructure, mechanical and corrosion properties of Mg-Gd-Zn alloys

    Srinivasa, A., Huang, Y., Mendis, C. L., Dieringa, H., Blawert, C., Kainer, K. U. & Hort, N., 2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 28-32 5 p. (Materials Science Forum; vol. 765).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  32. Microstructures, Corrosion and Mechanical Properties of Mg–Si Alloys as Biodegradable Implant Materials

    Wang, W., Gao, M., Huang, Y., Tan, L., Yang, K. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 151-157 7 p. (Minerals, Metals and Materials Series).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  33. Published

    Mirrored piezo servo hydraulic actuators for use in camless combustion engines and its Control with mirrored inputs and MPC

    Haus, B., Mercorelli, P. & Werner, N., 16.11.2015, 2015 European Control Conference, ECC 2015. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1686 - 1692 7 p. 7330780. (2015 European Control Conference, ECC 2015).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  34. Published

    Model and Validation of the Electromagnetic Interference Produced by Power Transmission Lines in Robotic Systems

    Silva, M. F., Honorio, L. M., Santos, M. F., Vidal, V. F. & Mercorelli, P., 2021, 2021 25th International Conference on System Theory, Control and Computing (ICSTCC): October 20 – 23, 2021 Iași, Romania, Proceedings. Ferariu, L., Matcovschi, M-H. & Ungureanu, F. (eds.). Piscataway: Institute of Electrical and Electronics Engineers Inc., p. 519-524 6 p. (International Conference on System Theory, Control and Computing; no. 25).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  35. Modeling and numerical simulation of multiscale behavior in polycrystals via extended crystal plasticity

    Klusemann, B., Bargmann, S. & Svendsen, B., 2011, 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Brenn, G., Holzapfel, G. A., Schanz, M. & Steinbach, O. (eds.). Wiley-VCH Verlag, Vol. 11. p. 531–532 3 p. (PAMM - Procedings in Applied Mathematics and Mechanics; vol. 11, no. 1).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  36. Modeling and simulation of inelastic microstructure development and inhomogeneous material behavior via non-convex rate dependent gradient plasticity

    Klusemann, B., Yalçinkaya, T., Geers, M. & Svendsen, B., 2012, ECCOMAS 2012: Proceedings of the 6th EUROPEAN CONGRESS ON COMPUTATIONAL METHODS IN APPLIED SCIENCES AND ENGINEERING. Yalcinkaya, T. & Svendsen, B. (eds.). Technische Universität Wien, p. 1005-1015 11 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  37. Modeling and simulation of the heterogenous material behavior in thermal-sprayed coatings

    Klusemann, B., Hortig, C. & Svendsen, B., 2009, Computational Plasticity X - Fundamentals and Applications: Fundamentals and Applications (CD-ROM). Onate, E., Owen, D. R. J. & Suarez, B. (eds.). International Center for Numerical Methods in Engineering (CIMNE), 2 p. (Computational Plasticity X - Fundamentals and Applications).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  38. Modeling and simulation of the microstructural behaviour in thermal sprayed coatings

    Klusemann, B., Hortig, C. & Svendsen, B., 2009, PAMM 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics . Kalinski, K. J. (ed.). 1 ed. John Wiley & Sons Inc., Vol. 9. p. 421–422 2 p. (PAMM - Proceedings in Applied Mathematics and Mechanics; vol. 9, no. 1).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  39. Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation

    Schwane, M., Gagliardi, F., Jäger, A., Ben Khalifa, N. & Tekkaya, A. E., 2013, The Current State-of-the-Art on Material Forming. de Sousa, R. A. & Valente, R. (eds.). Scientific.Net , Vol. 554-557. p. 787-793 7 p. (Key Engineering Materials; vol. 554-557).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  40. Published

    Modeling approach of thermal decomposition of salt-hydrates for heat storage systems

    Fopah Lele, A., Kuznik, F., Rammelberg, H., Schmidt, T. & Ruck, W., 14.07.2013, ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology: Heat Transfer in Energy Systems; Thermophysical Properties; Theory and Fundamental Research in Heat Transfer. ASME. (ed.). The American Society of Mechanical Engineers, Vol. 1. p. Paper No. HT2013-17022, pp. V001T01A010; 10 pages 10 p. V001T01A010. (ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology; vol. 1).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  41. Modeling Bolt Load Retention of Ca modified AS41 using compliance-creep method

    Anopuo, O., Huang, Y., Hort, N., Kainer, K. U. & Maier, P., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 278-281 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  42. Modeling Converging Material Flows In The Supply Chain

    Beck, S., Schmidt, M. & Nyhuis, P., 2011, 21st International Conference on Production Research: Innovation in Product and Production, ICPR 2011 - Conference Proceedings. Spath, D., Ilg, R. & Krause, T. (eds.). Fraunhofer-Institut für Arbeitswirtschaft und Organisation, p. 966-970 5 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  43. Published

    Modeling of 3D fluid-structure-interaction during in-situ hybridization of double-curved fiber-metal-laminates

    Poppe, C. T., Kruse, M. & Kärger, L., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Krakow: MaterialsResearchForum LLC, p. 219-230 12 p. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  44. Modeling of sheet metals with coarse texture via crystal plasticity

    Klusemann, B., Knorr, A. F., Vehoff, H. & Svendsen, B., 2012, MEMS and Nanotechnology. Shaw, G. A., Prorok, B. C. & Starman, L. A. (eds.). Springer, Vol. 6. p. 101-110 10 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  45. Modellierung und simulation des heterogenen materialverhaltens in thermisch gespritzten schichten

    Klusemann, B., 2009, SFB708 - 3. öffentliches Kolloquium: Praxiswissen (3D-Surface Engineering für Werkzeugsysteme der Blechformteilefertigung). Tillmann, W. (ed.). Verlag Praxiswissen, Vol. 3. p. 107 – 115 9 p.

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  46. Modellierung und simulation des material- und mikrostrukturverhaltens thermisch gespritzter schichten

    Klusemann, B. & Svendsen, B., 2010, 3D-Surface Engineering für Werkzeug- systeme der Blechformteilefertigung - Erzeugung, Modellierung, Bearbeitung.: SFB708 - Berichtsband 2007-2010. Tillmann, W. & Nebel, J. (eds.). Verlag Praxiswissen, p. 163–178 163 p. (Sonderforschungsbereich SFB 708).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  47. Published

    Modelling and Optimization of Commuter Flows as Queuing System Considering Customer and Environmental Costs: a Case Study

    Hering, L. Z., Mercorelli, P., Dos Santos, M. F. & Fernandes, F. M., 12.06.2023, Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023. Drotos, D., Benotsmane, R., Varga, A. K., Trohak, A. & Vasarhelyi, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 495-500 6 p. (Proceedings of the 2023 24th International Carpathian Control Conference, ICCC 2023).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  48. Published

    Modelling Interdependencies Within Production Planning and Control: An Application-Motivated Approach

    Mütze, A., Hillnhagen, S., Schmidt, M. & Nyhuis, P., 2022, Advances in Production Management Systems : Smart Manufacturing and Logistics Systems: Turning Ideas into Action; IFIP WG 5.7 International Conference, APMS 2022 Gyeongju, South Korea, September 25–29, 2022 Proceedings, Part I. Kim, D. Y., von Cieminski, G. & Romero, D. (eds.). Cham: Springer Schweiz, p. 518-525 8 p. (IFIP Advances in Information and Communication Technology; vol. 663).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  49. Published

    Modelling of a servo piezo mechanical hydraulic actuator and its feed-forward control

    Haus, B., Mercorelli, P. & Werner, N., 23.01.2015, Proceedings of 2014 International Conference on Modelling, Identification and Control, ICMIC 2014: ICMIC 2014 Melbourne, Australia December 3rd - 5th, 2014. IEEE - Institute of Electrical and Electronics Engineers Inc., p. 117 - 122 6 p. 7020738. (Proceedings of 2014 International Conference on Modelling, Identification and Control, ICMIC 2014).

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

  50. Published

    Model predictive control for switching gain adaptation in a sliding mode controller of a DC drive with nonlinear friction

    Haus, B., Röhl, J. H., Mercorelli, P. & Aschemann, H., 01.11.2018, 2018 22nd International Conference on System Theory, Control and Computing (ICSTCC) 2018: Proceedings October 10 - 12, 2018 Sinaia, România. Barbu, M., Şolea, R. & Filipescu, A. (eds.). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 765-770 6 p. 8540681

    Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

Previous 1...5 6 7 8 9 10 11 12 ...34 Next