Professorship for materials mechanics
Organisational unit: Section
Organisation profile
The professorship "materials mechanics“ focuses on the development of suitable models for different classes of materials based on the physical deformation mechanisms as well as on the modeling and simulation of local production processes. The development of these material models is crucial for the application of new materials, since these models are able to describe the deformation behavior in industrial production processes which allows for their optimization. In particular, local engineering in the context of production processes is of high technological relevance in adjusting local properties. For example, laser material processing and friction stir welding are relevant processes which are investigated. A targeted heat input into the material can be used to control and adjust the properties near the surface. As a result, improved properties, particularly in terms of damage tolerance can be achieved. The complexity of the interaction between the process parameters and material properties leads to high experimental effort, with sophisticated experimental techniques required to determine the influence of the process on the component. Therefore, reliable models are required to reduce the experimental effort. The developed material and process models are used to identify optimal process parameters that produce the desired properties inside the material and structure. The main objective of the professorship is to develop realistic and efficient numerical models which are formulated on basis of the underlying physical mechanisms. The identification of these mechanisms requires interdisciplinary collaborations with scientists from materials science, mechanics and production.The cooperation between the University of Lüneburg and the Helmholtz-Zentrum Geesthacht provides an ideal opportunity to accomplish the goals of this shared professorship.
Topics
modeling of microstructures
process modeling ans simulation of laser shock peening
process modeling and simulation of laser welding
modeling of metallic glasses
modeling of residual stresses
modeling of nano materials
development of homogenization approaches for heterogeneous materials
- 2024
- Published
Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys
Antunes Duda, E., Kallien, Z., da Silva Soares, S., Hernandez Schneider, T., Ribeiro Piaggio Cardoso, H., Vieira Braga Lemos, G., Falcade, T., Reguly, A. & Klusemann, B., 12.2024, In: Scientific Reports. 14, 10 p., 9882.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems
Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 p., 102692.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Numerical simulation of friction extrusion: process characteristics and material deformation due to friction
Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 05.2024, In: International Journal of Material Forming. 17, 3, 13 p., 26.Research output: Journal contributions › Journal articles › Research › peer-review
- E-pub ahead of print
Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases
de Castro, C. C., Neves, A. M. & Klusemann, B., 17.04.2024, (E-pub ahead of print) In: Journal of Magnesium and Alloys. 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6
Becker, N., dos Santos, J. F. & Klusemann, B., 16.04.2024, In: Engineering Fracture Mechanics. 300, 11 p., 109963.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Investigation of microstructural and mechanical properties in AA2024-T351 multi-layer friction surfacing
Hoffmann, M., Roos, A. & Klusemann, B., 30.03.2024, In: Surface and Coatings Technology. 480, 11 p., 130610.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy
Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, In: Journal of Materials Research and Technology. 29, p. 4895-4901 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, In: Additive Manufacturing Letters. 8, 8 p., 100184.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy
Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, In: Journal of Magnesium and Alloys. 12, 2, p. 516-529 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditions
Examilioti, T. N., Karanikolas, D., Riekehr, S., Al-Hamdany, N., Papanikos, P., Klusemann, B., Kashaev, N. & Alexopoulos, N. D., 23.01.2024, In: Engineering Fracture Mechanics. 295, 20 p., 109811.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing
Bock, F. E., Kallien, Z., Huber, N. & Klusemann, B., 01.01.2024, In: Computer Methods in Applied Mechanics and Engineering. 418, Part A, 26 p., 116453.Research output: Journal contributions › Journal articles › Research
- Published
Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals
Lehmann, J., Keller, S., Esterl, F., Kashaev, N., Klusemann, B. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 352-362 11 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024
Chan, C. Y. C., Suhuddin, U. F. H. R., Rath, L., Bachiega, F. L. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 422-428 7 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Processability of Mg-Gd Powder via Friction Extrusion
Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 431-441 11 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- 2023
- E-pub ahead of print
Deformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen forming
Sala, S. T., Bock, F. E., Pöltl, D., Klusemann, B., Huber, N. & Kashaev, N., 08.12.2023, (E-pub ahead of print) In: Journal of Intelligent Manufacturing. 21 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 (Scientific Reports, (2023), 13, 1, (10669), 10.1038/s41598-023-37913-4)
Amavisca, C. V., Bergmann, L., de, C. R., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 1 p., 11959.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625
Amavisca, C. V., Bergmann, L., Lessa, C. R. D. L., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 10 p., 10669.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Friction Stir Welding of Various Aluminium Alloys to Titanium
Grassel, S. F., Bergmann, L. & Klusemann, B., 29.11.2023, In: Key Engineering Materials. 966, p. 49-54 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Friction surfacing of aluminum to steel: Influence of different substrate surface topographies
Roos, A., Metternich, F., Kallien, Z., Baumann, J., Ehrich, J., Kipp, M., Hanke, S., Biermann, D. & Klusemann, B., 01.11.2023, In: Materials and Design. 235, 12 p., 112390.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion
Suhuddin, U. F. H., Rath, L., Halak, R. M. & Klusemann, B., 01.11.2023, In: Materials Characterization. 205, 13 p., 113252.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Process parameter assessment on the dissimilar deposition of AA2024-T351 on AA7475-T761 by friction surfacing
Brandes, A. C., Roos, A., Klusemann, B., Martins, J. D. P., dos Santos, J. F. & Carvalho, A. L. M., 01.11.2023, In: Journal of Materials Research and Technology. 27, p. 7593-7605 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Refill friction stir spot welding of thermoplastic composites: Case study on Carbon-fiber-reinforced polyphenylene sulfide
Schäfer, H., Blaga, L. A., Stöver, E. & Klusemann, B., 01.10.2023, In: Thin-Walled Structures. 191, 111037.Research output: Journal contributions › Journal articles › Research
- Published
Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys
Kallien, Z., Hoffmann, M., Roos, A. & Klusemann, B., 10.2023, In: JOM: Journal of The Minerals, Metals & Materials Society. 75, 10, p. 4212-4222 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Microstructural development of as-cast AM50 during Constrained Friction Processing: grain refinement and influence of process parameters
de Castro, C. C., Shen, J., dos Santos, J. F. & Klusemann, B., 01.09.2023, In: Journal of Materials Processing Technology. 318, 11 p., 118018.Research output: Journal contributions › Journal articles › Research
- Published
Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing
Escobar, J., Gwalani, B., Silverstein, J., Ajantiwalay, T., Roach, C., Bergmann, L., dos Santos, J. F., Maawad, E., Klusemann, B. & Devaraj, A., 01.08.2023, In: Materials Characterization. 202, 112999.Research output: Journal contributions › Journal articles › Research
- Published
Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy
Li, G., Chen, T., Fu, B., Shen, J., Bergmann, L., Zhou, L., Chen, K., Santos, J. F. D. & Klusemann, B., 01.08.2023, In: Journal of Materials Processing Technology. 317, 117984.Research output: Journal contributions › Journal articles › Research
- Published
Fatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealant
Bernardi, M., Suhuddin, U. F. H., Fu, B., Gerber, J. P., Bianchi, M., Ostrovsky, I., Sievers, B., Faes, K., Maawad, E., Lazzeri, L., dos Santos, J. F. & Klusemann, B., 01.07.2023, In: International Journal of Fatigue. 172, 107539.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing
Kallien, Z., Knothe-Horstmann, C. & Klusemann, B., 01.07.2023, In: Additive Manufacturing Letters. 6, 7 p., 100154.Research output: Journal contributions › Comments / Debate / Reports › Research
- Published
Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process
Jin, F., Fu, B., Shen, J., Li, J., Li, W., Santos, J. F. D. & Klusemann, B., 01.06.2023, In: Materials Characterization. 200, 112911.Research output: Journal contributions › Journal articles › Research
- Published
Friction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint properties
Rodrigues, C. F., Blaga, L. & Klusemann, B., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 4639-4649 11 p.Research output: Journal contributions › Journal articles › Research
- Published
On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions
Examilioti, T. N., Li, W., Kashaev, N., Ventzke, V., Klusemann, B., Tiryakioğlu, M. & Alexopoulos, N. D., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 895-908 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing
Kallien, Z., Roos, A., Knothe-Horstmann, C. & Klusemann, B., 26.04.2023, In: Materials Science & Engineering A. 871, 11 p., 144872.Research output: Journal contributions › Journal articles › Research
- Published
Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties
Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Process characteristics of constrained friction processing of AM50 magnesium alloy
de Castro, C. C., Shen, J., Dos Santos, J. F. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 3. p. 1739-1746 8 p. 188. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Process simulation of friction extrusion of aluminum alloys
Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Analysis of a phase‐field finite element implementation for precipitation
Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, In: PAMM. 22, 1, 6 p., e202200238.Research output: Journal contributions › Conference article in journal › Research
- Published
Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing
Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion
Taghipour, A., Mazaheri, Y., McDavid, J., Sheikhi, S., Braun, M., Shen, J., Klusemann, B. & Ehlers, S., 02.2023, In: Advanced Engineering Materials. 25, 4, 16 p., 2201230.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy
Wang, J., Fu, B., Bergmann, L., Liu, F. & Klusemann, B., 01.2023, In: Journal of Materials Engineering and Performance. 32, 2, p. 577-586 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- 2022
- Published
Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy
Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Ajantiwalay, T., Overman, N., Fu, W., Li, Y., Bergmann, L., Maawad, E., Klusemann, B., Santos, J. F. D. & Devaraj, A., 20.12.2022, In: Journal of Alloys and Compounds. 928, 9 p., 167007.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study
Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.Research output: Journal contributions › Journal articles › Research
- Published
Modeling of temperature- and strain-driven intermetallic compound evolution in an Al-Mg system via a multiphase-field approach with application to refill friction stir spot welding
Raza, S. H., Mittnacht, T., Diyoke, G., Schneider, D., Nestler, B. & Klusemann, B., 01.12.2022, In: Journal of the Mechanics and Physics of Solids. 169, 105059.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences
Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, In: Materials Science & Engineering A. 859, 144227.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
A multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloy
Wang, J., Fu, B., Shen, J., Bergmann, L., Lu, X., dos Santos, J. F. & Klusemann, B., 01.09.2022, In: Journal of Materials Processing Technology. 307, 117679.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steel
Bergmann, L. A., Batistão, B. F., de Alcântara, N. G., Gargarella, P. & Klusemann, B., 01.09.2022, In: Welding in the World. 66, 9, p. 1747-1756 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Tool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheets
Castro, C. C. D., Shen, J., Plaine, A. H., Suhuddin, U. F. H., Alcântara, N. G. D., Santos, J. F. D. & Klusemann, B., 01.09.2022, In: Journal of Materials Research and Technology. 20, p. 857-866 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparison of Friction Extrusion Processing from Bulk and Chips of Aluminum-Copper Alloys
Rath, L., Suhuddin, U. F. H. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 471-480 10 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN
Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental Investigation of Efficiency and Deposit Process Temperature During Multi-Layer Friction Surfacing
Kallien, Z., Roos, A. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 187-193 7 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens
Pöltl, D., Keller, S., Chupakhin, S., Sala, S. T., Kashaev, N. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 2293-2302 10 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheets
Sala, S. T., Keller, S., Chupakhin, S., Pöltl, D., Klusemann, B. & Kashaev, N., 01.07.2022, In: Journal of Materials Processing Technology. 305, 16 p., 117578.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimental and numerical investigation of laser beam-welded Al-Cu-Li joints using micro-mechanical characteristics
Examilioti, T. N., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.07.2022, In: Journal of Materials Research and Technology. 19, p. 2431-2446 16 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing
Soujon, M., Kallien, Z., Roos, A., Zeller-Plumhoff, B. & Klusemann, B., 01.07.2022, In: Materials and Design. 219, 15 p., 110786.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing
Kallien, Z. & Klusemann, B., 15.05.2022, In: Surface and Coatings Technology. 437, 11 p., 128350.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum
Halak, R. M., Rath, L., Suhuddin, U. F. H. R., dos Santos, J. F. & Klusemann, B., 01.05.2022, In: International Journal of Material Forming. 15, 3, 14 p., 24.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Tailoring powder strengths for enhanced quality of cold sprayed Al6061 deposits
Huang, C., List, A., Shen, J., Fu, B., Yin, S., Chen, T., Klusemann, B., Gärtner, F. & Klassen, T., 01.03.2022, In: Materials and Design. 215, 18 p., 110494.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Coupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress Prediction
Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 01.01.2022, In: Metals. 12, 1, 19 p., 107.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Numerical investigation of laser beam-welded AA2198 joints under different artificial ageing conditions
Examilioti, T., Germanou, A., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.01.2022, In: Procedia Structural Integrity. 42, p. 244-250 7 p.Research output: Journal contributions › Conference article in journal › Research
- 2021
- Published
Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy
Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Overman, N., Bergmann, L., dos Santos, J. F., Staron, P., Maawad, E., Klusemann, B., Mathaudhu, S. & Devaraj, A., 20.12.2021, In: Journal of Alloys and Compounds. 887, 13 p., 161351.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets
Janga, V. S. R., Awang, M., Yamin, M. F., Suhuddin, U. F. H., Klusemann, B. & dos Santos, J. F., 06.12.2021, In: Materials. 14, 23, 20 p., 7485.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Simulation of fatigue crack growth in residual‐stress‐afflicted specimen with a phase‐field model
Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.12.2021, In: PAMM. 21, 1, 2 p., e202100210.Research output: Journal contributions › Conference abstract in journal › Research
- Published
Effect of the gap width in AZ31 magnesium alloy joints obtained by friction stir welding
Chiuzuli, F. R., Batistão, B. F., Bergmann, L. A., Alcântara, N. G. D., dos Santos, J. F., Klusemann, B. & Gargarella, P., 01.11.2021, In: Journal of Materials Research and Technology. 15, p. 5297-5306 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel
Fu, B., Shen, J., Suhuddin, U. F. H. R., Pereira, A. A. C., Maawad, E., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.11.2021, In: Materials and Design. 209, 18 p., 109997.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Improved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot welding
Fu, B., Shen, J., Suhuddin, U. F. H. R., Chen, T., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.10.2021, In: Scripta Materialia. 203, 6 p., 114113.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Tailoring of residual stresses by specific use of defined prestress during laser shock peening
Schwab, K. C., Keller, S., Kashaev, N. & Klusemann, B., 01.09.2021, In: Journal of Materials Processing Technology. 295, 11 p., 117154.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints
Su, Y., Li, W., Shen, J., Fu, B., dos Santos, J. F., Klusemann, B. & Vairis, A., 17.08.2021, In: Materials Science and Engineering A. 823, 141698.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Modeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid technique
Herrnring, J., Sundman, B., Staron, P. & Klusemann, B., 15.08.2021, In: Acta Materialia. 215, 14 p., 117053.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Empowering materials processing and performance from data and AI
Chinesta, F., Cueto, E. & Klusemann, B., 06.08.2021, In: Materials. 14, 16, 4 p., 4409.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Effect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198
Examilioti, T. N., Kashaev, N., Ventzke, V., Klusemann, B. & Alexopoulos, N. D., 01.08.2021, In: Materials Characterization. 178, 14 p., 111257.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Phase-field modelling for fatigue crack growth under laser shock peening-induced residual stresses
Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.08.2021, In: Archive of Applied Mechanics. 91, 8, p. 3709-3723 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits
Ehrich, J., Roos, A., Klusemann, B. & Hanke, S., 05.07.2021, In: Materials Science and Engineering A. 819, 141407.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Microstructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery application
Gera, D., Fu, B., Suhuddin, U. F. H. R., Plaine, A., Alcantara, N., dos Santos, J. F. & Klusemann, B., 01.07.2021, In: Journal of Materials Research and Technology. 13, p. 2272-2286 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Compression behaviour of wire + arc additive manufactured structures
Abbaszadeh, M., Ventzke, V., Neto, L., Riekehr, S., Martina, F., Kashaev, N., Hönnige, J., Williams, S. & Klusemann, B., 01.06.2021, In: Metals. 11, 6, 18 p., 877.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Hybrid modelling by machine learning corrections of analytical model predictions towards high-fidelity simulation solutions
Bock, F. E., Keller, S., Huber, N. & Klusemann, B., 10.04.2021, In: Materials. 14, 8, 19 p., 1883.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Evaluation of mechanical property predictions of refill Friction Stir Spot Welding joints via machine learning regression analyses on DoE data
Bock, F. E., Paulsen, T., Brkovic, N., Rieckmann, L., Kroeger, D., Wolgast, D., Zander, P., Suhuddin, U. F. H., dos Santos, J. F. & Klusemann, B., 02.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 11 p. 2589. (ESAFORM 2021 - 24th International Conference on Material Forming).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Deformation and Anchoring of AA 2024-T3 rivets within thin printed circuit boards
Antunes Viallas Boas, M. C., Rodrigues, C. F., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 01.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 12 p. 21.4327. (ESAFORM 2021).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloys
Bock, F. E., Herrnring, J., Froend, M., Enz, J., Kashaev, N. & Klusemann, B., 01.04.2021, In: Journal of Manufacturing Processes. 64, p. 982-995 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloy
Sun, R., Keller, S., Zhu, Y., Guo, W., Kashaev, N. & Klusemann, B., 01.04.2021, In: International Journal of Fatigue. 145, 13 p., 106081.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Investigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel (R) 625
Landell, R. M., de Lima Lessa, C. R., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F. & Klusemann, B., 01.03.2021, In: Welding in the World. 65, 3, p. 393-403 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of stress intensity factor superposition in residual stress fields considering crack closure
Keller, S. & Klusemann, B., 15.02.2021, In: Engineering Fracture Mechanics. 243, 13 p., 107415.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Investigation of temperature evolution and flash formation at AA5083 studs during friction surfacing
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 05.01.2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 660-665 6 p. (Materials Science Forum; vol. 1016 MSF).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints
Wen, Q., Li, W., Patel, V., Bergmann, L., Klusemann, B. & dos Santos, J. F., 01.01.2021, In: Acta Metallurgica Sinica (English Letters). 34, 1, p. 125-134 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- 2020
- Published
Multiphase-field modeling of temperature-driven intermetallic compound evolution in an Al-Mg system for application to solid-state joining processes
Raza, S. H. & Klusemann, B., 12.2020, In: Modelling and Simulation in Materials Science and Engineering. 28, 8, 085003.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel
Batistao, B. F., Bergmann, L., Gargarella, P., de Alcantara, N. G., dos Santos, J. F. & Klusemann, B., 01.11.2020, In: Journal of Materials Research and Technology. 9, 6, p. 15132-15142 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimentally established correlation of friction surfacing process temperature and deposit geometry
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 15.09.2020, In: Surface and Coatings Technology. 397, 7 p., 126040.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
On the influence of laser beam welding parameters for autogenous AA2198 welded joints
Examilioti, T., Kashaev, N., Enz, J., Klusemann, B. & Alexopoulos, N. D., 01.09.2020, In: The International Journal of Advanced Manufacturing Technology. 110, 7-8, p. 2079-2092 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Combined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peening
Sandmann, P., Nielsen, M. A., Keller, S., Maawad, E., Staron, P. & Klusemann, B., 01.08.2020, In: Strain. 56, 4, 17 p., e12338.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
On the application of laser shock peening for retardation of surface fatigue cracks in laser beam-welded AA6056
Kashaev, N., Ushmaev, D., Ventzke, V., Klusemann, B. & Fomin, F., 01.07.2020, In: Fatigue and Fracture of Engineering Materials and Structures. 43, 7, p. 1500-1513 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding
Yamin, M. F., Awang, M., Suhuddin, U. F. H., Sallih, N., Klusemann, B. & dos Santos, J. F., 01.06.2020, In: Materialwissenschaft und Werkstofftechnik. 51, 6, p. 830-835 6 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Two-pass friction stir welding of cladded API X65
de Lima Lessa, C. R., Landell, R. M., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F., Reguly, A. & Klusemann, B., 01.05.2020, In: Procedia Manufacturing. 47, p. 1010-1015 6 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Friction riveting of 3D printed polyamide 6 with AA 6056-T6
dos Santos Mallmann, P. H., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 05.2020, In: Procedia Manufacturing. 47, p. 406-412 7 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Mechanical performance prediction for friction riveting joints of dissimilar materials via machine learning
Bock, F. E., Blaga, L. A. & Klusemann, B., 05.2020, In: Procedia Manufacturing. 47, p. 615-622 8 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
The influence of laser shock peening on fatigue properties of AA2024-T3 alloy with a fastener hole
Sikhamov, R., Fomin, F., Klusemann, B. & Kashaev, N., 09.04.2020, In: Metals. 10, 4, 13 p., 495.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Diffusion-driven microstructure evolution in OpenCalphad
Herrnring, J., Sundman, B. & Klusemann, B., 01.04.2020, In: Computational Materials Science. 175, 10 p., 109236.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Editorial: Machine Learning and Data Mining in Materials Science
Huber, N., Kalidindi, S. R., Klusemann, B. & Cyron, C. J., 28.02.2020, In: Frontiers in Materials. 7, 3 p., 51.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Microstructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal deposition
Froend, M., Ventzke, V., Dorn, F., Kashaev, N., Klusemann, B. & Enz, J., 20.01.2020, In: Materials Science and Engineering A. 772, 13 p., 138635.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Fatigue crack propagation influenced by laser shock peening introduced residual stress fields in aluminium specimens
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.01.2020, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing: Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Niepokolczycki, A. & Komorowski, J. (eds.). Cham, Schweiz: Springer, p. 617-631 15 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Digitalisierung aus der Perspektive Fachdidaktischer Forschung und Ingenieurwissenschaftlicher Lehrpraxis
Block, B-M. & Klusemann, B., 2020, 14. Ingenieurpädagogischen Regionaltagung 2019: Technische Bildung im Kontext von 'Digitalisierung' / 'Automatisierung' - Tendenzen, Möglichkeiten, Perspektiven. Petersen, M. & Kammasch, G. (eds.). Berlin: Ingenieur-Pädagogische Wissenschaftsgesellschaft, p. 147-155 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- 2019
- Published
Crack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approach
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.11.2019, In: Engineering Fracture Mechanics. 221, 15 p., 106630.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Two-step simulation approach for laser shock peening
Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 11.2019, In: Proceedings in applied mathematics and mechanics. 19, 1, 2 p., e201900497.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Thermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiances
Froend, M., Ventzke, V., Kashaev, N., Klusemann, B. & Enz, J., 01.10.2019, In: Additive Manufacturing. 29, UNSP 100800.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures
Abbaszadeh, M., Hönnige, J. R., Martina, F., Neto, L., Kashaev, N., Colegrove, P., Williams, S. & Klusemann, B., 15.08.2019, In: Journal of Materials Engineering and Performance. 28, 8, p. 4931-4942 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer deposition
Shen, J., Hanke, S., Roos, A., Santos, J. F. D. & Klusemann, B., 02.07.2019, In: AIP Conference Proceedings. 2113, 1, 6 p., 150015.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Numerical study of rolling process on the plastic strain distribution in wire + arc additive manufactured Ti-6Al-4V
Abbaszadeh, M., Hönnige, J., Martina, F., Kashaev, N., Williams, S. W. & Klusemann, B., 02.07.2019, In: AIP Conference Proceedings. 2113, 1, 6 p., 150019.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Experimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peening
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.07.2019, In: International Journal of Fatigue. 124, p. 265-276 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of design of experiments for laser shock peening process optimization
Chupakhin, S., Klusemann, B., Huber, N. & Kashaev, N., 19.06.2019, In: The International Journal of Advanced Manufacturing Technology. 102, 5-8, p. 1567-1581 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of laser peening process parameters and sequences on residual stress profiles
Kallien, Z., Keller, S., Ventzke, V., Kashaev, N. & Klusemann, B., 04.06.2019, In: Metals. 9, 6, 14 p., 655.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics
Bock, F. E., Aydin, R. C., Cyron, C. C., Huber, N., Kalidindi, S. R. & Klusemann, B., 15.05.2019, In: Frontiers in Materials. 6, 23 p., 110.Research output: Journal contributions › Scientific review articles › Research
- Published
The scaled boundary finite element method for computational homogenization of heterogeneous media
Talebi, H., Silani, M. & Klusemann, B., 06.04.2019, In: International Journal for Numerical Methods in Engineering. 118, 1, p. 1-17 17 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Global modelling of the ns-laser shock peening
Pozdnyakov, V., Keller, S., Klusemann, B., Kashaev, N. & Oberrath, J., 03.2019, DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK) : mit den Fachverbänden (sektionszugehörig): Extraterrestrische Physik, Gravitation und Relativitätstheorie, Physik der Hadronenund Kerne, Theoretische und Mathematische Grundlagen der Physik sowie weiteren Fachverbänden: Geschichte der Physik, Kurzzeit- und angewandte Laserphysik, Plasmaphysik, Umweltphysik und den Arbeitskreisen bzw. der Arbeitsgruppe: Beschleunigerphysik, Chancengleichheit, Junge DPG, Philosophie der Physik. Bad Honnef: Deutsche Physikalische Gesellschaft, p. 151 1 p. K 6.1. (Verhandlung der Deutschen Physikalischen Gesellschaft, Reihe 6; vol. 54, no. 2).Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Computational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive model
Raza, S. H., Soyarslan, C., Bargmann, S. & Klusemann, B., 01.02.2019, In: Computer Methods in Applied Mechanics and Engineering. 344, p. 887-909 23 p.Research output: Journal contributions › Journal articles › Research › peer-review
- 2018
- Published
Surface modification methods for fatigue properties improvement of laser-beam-welded Ti-6Al-4V butt joints
Fomin, F., Klusemann, B. & Kashaev, N., 31.12.2018, In: Procedia Structural Integrity. 13, p. 273-278 6 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Experimental investigation of temperature distribution during wire-based laser metal deposition of the Al-Mg alloy 5087
Frönd, M., Bock, F. E., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 01.12.2018, In: Materials Science Forum. 941, p. 988-994 7 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Precipitation Kinetics of AA6082: An Experimental and Numerical Investigation
Herrnring, J., Kashaev, N. & Klusemann, B., 12.2018, In: Materials Science Forum. 941, p. 1411-1417 7 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Multiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082
Herrnring, J., Staron, P., Kashaev, N. & Klusemann, B., 11.2018, In: Materialia. 3, p. 243-255 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Correction to: Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding
Fomin, F., Froend, M., Ventzke, V., Alvarez, P., Bauer, S. & Kashaev, N., 01.10.2018, In: The International Journal of Advanced Manufacturing Technology. 99, 1-4, p. 1059-1059 1 p., 99:1059.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Microstructure and hardness evolution of laser metal deposited AA5087 wall-structures
Frönd, M., Ventzke, V., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 03.09.2018, In: Procedia CIRP. 74, p. 131-135 5 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Microstructure and Microhardness of Wire-based Laser Metal Deposited AA5087 using an Ytterbium Fibre Laser
Frönd, M., Ventzke, V., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 09.2018, In: Materials Characterization. 143, p. 59-67 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Process Development for Wire-based Laser Metal Deposition of 5087 Aluminium alloy by using Fibre Laser
Frönd, M., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 08.2018, In: Journal of Manufacturing Processes. 34, Part A, p. 721-732 12 p., 34.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Generation of 3D representative volume elements for heterogeneous materials: A review
Bargmann, S., Klusemann, B., Schneider, K., Soyarslan, C., Markmann, J., Schnabel, J. E. & Wilmers, J., 01.07.2018, In: Progress in Materials Science. 96, p. 322-384 63 p.Research output: Journal contributions › Scientific review articles › Research
- Published
Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding
Fomin, F., Frönd, M., Ventzke, V., Alvarez, P., Bauer, S. & Kashaev, N., 01.07.2018, In: The International Journal of Advanced Manufacturing Technology. 97, 5-8, p. 2019-2031 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Fatigue Life Extension of AA2024 Specimens and Integral Structures by Laser Shock Peening
Kashaev, N., Chupakhin, S., Ventzke, V., Horstmann, M., Riekehr, S., Barbini, A., dos Santos, J., Keller, S., Klusemann, B. & Huber, N., 25.05.2018, MATEC Web of Conferences: 12th International Fatigue Congress (FATIGUE 2018) . G, H. (ed.). EDP Sciences, Vol. 165. 6 p. 18001. (MATEC Web of Conferences; vol. 165).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition
Klusemann, B. & Bambach, M., 02.05.2018, In: AIP Conference Proceedings. 1960, 1, 140012.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Thermal analysis of laser additive manufacturing of aluminium alloys: Experiment and simulation
Bock, F. E., Frönd, M., Herrnring, J., Enz, J., Kashaev, N. & Klusemann, B., 02.05.2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018: ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). American Institute of Physics Inc., 6 p. 140004. (AIP Conference Proceedings; vol. 1960, no. 1).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental and numerical investigation of residual stresses in laser shock peened AA2198
Keller, S., Chupakhin, S., Staron, P., Maawad, E., Kashaev, N. & Klusemann, B., 01.05.2018, In: Journal of Materials Processing Technology. 255, p. 294-307 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- 2017
- Published
Fiber laser welding of dissimilar titanium (Ti-6A1-4V/cp-Ti) T-joints and their laser forming process for aircraft application
Froend, M., Fomin, F., Riekehr, S., Alvarez, P., Zubiri, F., Bauer, S., Klusemann, B. & Kashaev, N., 01.11.2017, In: Optics and Laser Technology. 96, p. 123-131 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Fully periodic RVEs for technological relevant composites: Not worth the effort!
Schneider, K., Klusemann, B. & Bargmann, S., 07.2017, In: Journal of Mechanics of Materials and Structures. 12, 4, p. 471-484 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Artificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drilling
Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 01.04.2017, In: The Journal of Strain Analysis for Engineering Design. 52, 3, p. 137-151 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy
Examilioto, T., Klusemann, B., Kashaev, N., Riekehr, S., Enz, J. & Alexopoulos, N., 01.01.2017, In: Procedia Structural Integrity. 5, p. 13-18 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of Adaptive Element-Free Galerkin Method to Simulate Friction Stir Welding of Aluminum
Talebi, H., Froend, M. & Klusemann, B., 01.01.2017, In: Procedia Engineering. 207, p. 580-585 6 p., 137838.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Finite element modeling of laser beam welding for residual stress calculation
Herrnring, J. & Klusemann, B., 2017, In: Proceedings in applied mathematics and mechanics. 17, 1, p. 415 - 416 2 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Laser shock peening process modelling and experimental validation of AA2198-T3 and AA2198-T8
Keller, S., Kashaev, N. & Klusemann, B., 2017, In: Proceedings in applied mathematics and mechanics. 17, 1, p. 423 - 424 2 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- 2016
- Published
Fourth-order strain-gradient phase mixture model for nanocrystalline fcc materials
Klusemann, B., Bargmann, S. & Estrin, Y., 02.11.2016, In: Modelling and Simulation in Materials Science and Engineering. 24, 8, p. 1-23 23 p., 085016.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Modeling of microstructural pattern formation in crystal plasticity
Klusemann, B., 25.10.2016, In: Proceedings in applied mathematics and mechanics. 16, 1, p. 361-362 2 p.Research output: Journal contributions › Journal articles › Research
- Published
The effect of yield surface curvature change by cross hardening on forming limit diagrams of sheets
Soyarslan, C., Klusemann, B. & Bargmann, S., 01.10.2016, In: International Journal of Mechanical Sciences. 117, p. 53-66 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites
Schneider, K., Klusemann, B. & Bargmann, S., 01.09.2016, In: Advances in Engineering Software. 99, p. 177-188 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimental and numerical study of laser shock peening process of AA2198-T3 and AA2198-T8
Klusemann, B., Keller, S., Huber, N. & Kashaev, N., 2016, Book of Abstracts of the 6th International Conference on Laser Peening and Related Phenomena (6TH ICLPRP). Polese, C. (ed.). University of the Witwatersrand, p. 13 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Influences of RVE topology, discretization and boundary conditions in practical multiscaling - a comparison
Schneider, K., Klusemann, B. & Bargmann, S., 2016, Book of Abstract for Joint Annual Meeting of GAMM and DMV: March 7-11, 2016; Braunschweig, Germany. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 175 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Modeling of microstructural pattern formation in crystal plasticity
Klusemann, B., 2016, Book of Abstract of the Joint Annual Meeting of GAMM and DMV. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 621 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Study of intrinsic and extrinsic size effects on shear bands in metallic glasses
Klusemann, B., Soyarslan, C. & Bargmann, S., 2016, Contributions to the Foundations of Multidisciplinary Research in Mechanics: Papers presented during the 24th International Congress of Theoretical and Applied Mechanics ICTAM2016, Montreal, 22-26, 2016. Floryan, J. M. (ed.). International Union for Theoretical and Applied Mechanics, Vol. 3. p. 2524-2525 2 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review