Professur für Werkstoffmechanik
Organisation: Professur
Organisationsprofil
Die Professur „Werkstoffmechanik" beschäftigt sich maßgeblich mit der Entwicklung von geeigneten Materialmodellen für verschiedene Werkstoffklassen auf Basis der physikalischen Verformungsmechanismen sowie auf der Prozessmodellierung und -simulation von lokal wirkenden Fertigungsverfahren. Die Entwicklung solcher Materialmodelle ist entscheidend für die Anwendung von neuen Werkstoffen in der Praxis, da diese Modelle erlauben, das Verformungsverhalten in technologischen Produktionsprozessen zu beschreiben und in diesem Sinne zu optimieren. Lokal wirkende Fertigungsverfahren sind hierbei von hoher technologischer Bedeutung. Diese erlauben durch ihren gezielten Einsatz die lokale Einstellung von Eigenschaften. In diesem Zusammenhang sind beispielhaft die Lasermaterialbearbeitung und das Rührreibschweißen zu nennen. Durch einen gezielten Wärmeeintrag in das Material lassen sich die Eigenschaften nahe der Randschicht des Werkstücks maßgeblich beeinflussen und gesteuert verändern. Hierdurch sind verbesserte Eigenschaften, insbesondere in Hinblick auf die Schadenstoleranz, zu erreichen. Die Komplexität der Wechselwirkung zwischen Prozessparametern und Werkstoffeigenschaften führt zu einem hohen experimentellen Aufwand mit hoch entwickelten experimentellen Techniken, um den Einfluss auf das Bauteil bewerten zu können. Daher ist es unbedingt notwendig, diese Wechselwirkungen mit Hilfe der Modellierung abzusichern und im Optimalfall den experimentellen Aufwand auf ein Minimum zu reduzieren. Die entwickelten Prozess- und Materialmodelle werden anschließend dazu eingesetzt, um optimale Prozessparameter und -bedingungen zu identifizieren, die ein gewünschtes Eigenschaftsprofil im Werkstoff und in der Struktur erzeugen. Hierzu bedarf es belastbarer und numerisch effizienter Material- und Prozessmodelle, die anhand des Verständnisses der zugrundeliegenden physikalischen Mechanismen formuliert werden, was Hauptaufgabe der Professur darstellt. Die Identifizierung dieser Mechanismen bedarf der intensiven interdisziplinären Zusammenarbeit mit Wissenschaftlern der Materialwissenschaft, Mechanik und Produktionstechnik. Die Verknüpfung im Rahmen dieser Professur zwischen der Leuphana Universität Lüneburg mit dem Helmholtz-Zentrum Geesthacht bietet hierfür eine ideale Möglichkeit.
Themen
Modellierung von Mikrostrukturen
Prozessmodellierung und Simulation des Laser-shock-Peenings
Prozessmodellierung und Simulation des Laserstrahlschweißens
Modellierung metallischer Flässer
Modellierung von Eigenspannungen
Modellierung von Nanomaterialien
Entwicklung von Homogenisierungsansätzen für heterogene Materialien
- Kommentare / Debatten / Berichte › Forschung
- Erschienen
Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing
Kallien, Z., Knothe-Horstmann, C. & Klusemann, B., 01.07.2023, in: Additive Manufacturing Letters. 6, 7 S., 100154.Publikation: Beiträge in Zeitschriften › Kommentare / Debatten / Berichte › Forschung
- Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Application of Adaptive Element-Free Galerkin Method to Simulate Friction Stir Welding of Aluminum
Talebi, H., Froend, M. & Klusemann, B., 01.01.2017, in: Procedia Engineering. 207, S. 580-585 6 S., 137838.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Experimental investigation of temperature distribution during wire-based laser metal deposition of the Al-Mg alloy 5087
Frönd, M., Bock, F. E., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 01.12.2018, in: Materials Science Forum. 941, S. 988-994 7 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Finite element modeling of laser beam welding for residual stress calculation
Herrnring, J. & Klusemann, B., 2017, in: Proceedings in applied mathematics and mechanics. 17, 1, S. 415 - 416 2 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Friction riveting of 3D printed polyamide 6 with AA 6056-T6
dos Santos Mallmann, P. H., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 05.2020, in: Procedia Manufacturing. 47, S. 406-412 7 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer deposition
Shen, J., Hanke, S., Roos, A., Santos, J. F. D. & Klusemann, B., 02.07.2019, in: AIP Conference Proceedings. 2113, 1, 6 S., 150015.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Laser shock peening process modelling and experimental validation of AA2198-T3 and AA2198-T8
Keller, S., Kashaev, N. & Klusemann, B., 2017, in: Proceedings in applied mathematics and mechanics. 17, 1, S. 423 - 424 2 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding
Yamin, M. F., Awang, M., Suhuddin, U. F. H., Sallih, N., Klusemann, B. & dos Santos, J. F., 01.06.2020, in: Materialwissenschaft und Werkstofftechnik. 51, 6, S. 830-835 6 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Mechanical performance prediction for friction riveting joints of dissimilar materials via machine learning
Bock, F. E., Blaga, L. A. & Klusemann, B., 05.2020, in: Procedia Manufacturing. 47, S. 615-622 8 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Microstructure and hardness evolution of laser metal deposited AA5087 wall-structures
Frönd, M., Ventzke, V., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 03.09.2018, in: Procedia CIRP. 74, S. 131-135 5 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Numerical study of rolling process on the plastic strain distribution in wire + arc additive manufactured Ti-6Al-4V
Abbaszadeh, M., Hönnige, J., Martina, F., Kashaev, N., Williams, S. W. & Klusemann, B., 02.07.2019, in: AIP Conference Proceedings. 2113, 1, 6 S., 150019.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Precipitation Kinetics of AA6082: An Experimental and Numerical Investigation
Herrnring, J., Kashaev, N. & Klusemann, B., 12.2018, in: Materials Science Forum. 941, S. 1411-1417 7 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition
Klusemann, B. & Bambach, M., 02.05.2018, in: AIP Conference Proceedings. 1960, 1, 140012.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Surface modification methods for fatigue properties improvement of laser-beam-welded Ti-6Al-4V butt joints
Fomin, F., Klusemann, B. & Kashaev, N., 31.12.2018, in: Procedia Structural Integrity. 13, S. 273-278 6 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Two-pass friction stir welding of cladded API X65
de Lima Lessa, C. R., Landell, R. M., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F., Reguly, A. & Klusemann, B., 01.05.2020, in: Procedia Manufacturing. 47, S. 1010-1015 6 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Erschienen
Two-step simulation approach for laser shock peening
Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 11.2019, in: Proceedings in applied mathematics and mechanics. 19, 1, 2 S., e201900497.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung › begutachtet
- Konferenzaufsätze in Fachzeitschriften › Forschung › nicht begutachtet
- Erschienen
Analysis of a phase‐field finite element implementation for precipitation
Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, in: PAMM. 22, 1, 6 S., e202200238.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung
- Erschienen
Numerical investigation of laser beam-welded AA2198 joints under different artificial ageing conditions
Examilioti, T., Germanou, A., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.01.2022, in: Procedia Structural Integrity. 42, S. 244-250 7 S.Publikation: Beiträge in Zeitschriften › Konferenzaufsätze in Fachzeitschriften › Forschung
- Konferenz-Abstracts in Fachzeitschriften › Forschung › nicht begutachtet
- Erschienen
Simulation of fatigue crack growth in residual‐stress‐afflicted specimen with a phase‐field model
Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.12.2021, in: PAMM. 21, 1, 2 S., e202100210.Publikation: Beiträge in Zeitschriften › Konferenz-Abstracts in Fachzeitschriften › Forschung
- Übersichtsarbeiten › Forschung
- Erschienen
A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics
Bock, F. E., Aydin, R. C., Cyron, C. C., Huber, N., Kalidindi, S. R. & Klusemann, B., 15.05.2019, in: Frontiers in Materials. 6, 23 S., 110.Publikation: Beiträge in Zeitschriften › Übersichtsarbeiten › Forschung
- Erschienen
Generation of 3D representative volume elements for heterogeneous materials: A review
Bargmann, S., Klusemann, B., Schneider, K., Soyarslan, C., Markmann, J., Schnabel, J. E. & Wilmers, J., 01.07.2018, in: Progress in Materials Science. 96, S. 322-384 63 S.Publikation: Beiträge in Zeitschriften › Übersichtsarbeiten › Forschung
- Andere (Vorworte. Editoral u.ä.) › Forschung
- Erschienen
Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 (Scientific Reports, (2023), 13, 1, (10669), 10.1038/s41598-023-37913-4)
Amavisca, C. V., Bergmann, L., de, C. R., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, in: Scientific Reports. 13, 1, 1 S., 11959.Publikation: Beiträge in Zeitschriften › Andere (Vorworte. Editoral u.ä.) › Forschung
- Erschienen
Correction to: Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding
Fomin, F., Froend, M., Ventzke, V., Alvarez, P., Bauer, S. & Kashaev, N., 01.10.2018, in: The International Journal of Advanced Manufacturing Technology. 99, 1-4, S. 1059-1059 1 S., 99:1059.Publikation: Beiträge in Zeitschriften › Andere (Vorworte. Editoral u.ä.) › Forschung
- Erschienen
Editorial: Machine Learning and Data Mining in Materials Science
Huber, N., Kalidindi, S. R., Klusemann, B. & Cyron, C. J., 28.02.2020, in: Frontiers in Materials. 7, 3 S., 51.Publikation: Beiträge in Zeitschriften › Andere (Vorworte. Editoral u.ä.) › Forschung
- Erschienen
Empowering materials processing and performance from data and AI
Chinesta, F., Cueto, E. & Klusemann, B., 06.08.2021, in: Materials. 14, 16, 4 S., 4409.Publikation: Beiträge in Zeitschriften › Andere (Vorworte. Editoral u.ä.) › Forschung
- Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
A multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloy
Wang, J., Fu, B., Shen, J., Bergmann, L., Lu, X., dos Santos, J. F. & Klusemann, B., 01.09.2022, in: Journal of Materials Processing Technology. 307, 117679.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing
Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, in: The International Journal of Advanced Manufacturing Technology. 125, 5-6, S. 2091-2102 12 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy
Examilioto, T., Klusemann, B., Kashaev, N., Riekehr, S., Enz, J. & Alexopoulos, N., 01.01.2017, in: Procedia Structural Integrity. 5, S. 13-18 6 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Application of design of experiments for laser shock peening process optimization
Chupakhin, S., Klusemann, B., Huber, N. & Kashaev, N., 19.06.2019, in: The International Journal of Advanced Manufacturing Technology. 102, 5-8, S. 1567-1581 15 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, in: Additive Manufacturing Letters. 8, 8 S., 100184.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy
Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, in: Journal of Magnesium and Alloys. 12, 2, S. 516-529 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Application of stress intensity factor superposition in residual stress fields considering crack closure
Keller, S. & Klusemann, B., 15.02.2021, in: Engineering Fracture Mechanics. 243, 13 S., 107415.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Artificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drilling
Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 01.04.2017, in: The Journal of Strain Analysis for Engineering Design. 52, 3, S. 137-151 15 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints
Wen, Q., Li, W., Patel, V., Bergmann, L., Klusemann, B. & dos Santos, J. F., 01.01.2021, in: Acta Metallurgica Sinica (English Letters). 34, 1, S. 125-134 10 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites
Schneider, K., Klusemann, B. & Bargmann, S., 01.09.2016, in: Advances in Engineering Software. 99, S. 177-188 12 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy
Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, in: Journal of Materials Research and Technology. 29, S. 4895-4901 7 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems
Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, in: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 S., 102692.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum
Halak, R. M., Rath, L., Suhuddin, U. F. H. R., dos Santos, J. F. & Klusemann, B., 01.05.2022, in: International Journal of Material Forming. 15, 3, 14 S., 24.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel
Batistao, B. F., Bergmann, L., Gargarella, P., de Alcantara, N. G., dos Santos, J. F. & Klusemann, B., 01.11.2020, in: Journal of Materials Research and Technology. 9, 6, S. 15132-15142 11 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing
Kallien, Z. & Klusemann, B., 15.05.2022, in: Surface and Coatings Technology. 437, 11 S., 128350.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Combined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peening
Sandmann, P., Nielsen, M. A., Keller, S., Maawad, E., Staron, P. & Klusemann, B., 01.08.2020, in: Strain. 56, 4, 17 S., e12338.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences
Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, in: Materials Science & Engineering A. 859, 144227.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints
Su, Y., Li, W., Shen, J., Fu, B., dos Santos, J. F., Klusemann, B. & Vairis, A., 17.08.2021, in: Materials Science and Engineering A. 823, 141698.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Compression behaviour of wire + arc additive manufactured structures
Abbaszadeh, M., Ventzke, V., Neto, L., Riekehr, S., Martina, F., Kashaev, N., Hönnige, J., Williams, S. & Klusemann, B., 01.06.2021, in: Metals. 11, 6, 18 S., 877.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Computational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive model
Raza, S. H., Soyarslan, C., Bargmann, S. & Klusemann, B., 01.02.2019, in: Computer Methods in Applied Mechanics and Engineering. 344, S. 887-909 23 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys
Kallien, Z., Hoffmann, M., Roos, A. & Klusemann, B., 10.2023, in: JOM: Journal of The Minerals, Metals & Materials Society. 75, 10, S. 4212-4222 11 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys
Antunes Duda, E., Kallien, Z., da Silva Soares, S., Hernandez Schneider, T., Ribeiro Piaggio Cardoso, H., Vieira Braga Lemos, G., Falcade, T., Reguly, A. & Klusemann, B., 12.2024, in: Scientific Reports. 14, 10 S., 9882.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Coupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress Prediction
Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 01.01.2022, in: Metals. 12, 1, 19 S., 107.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Crack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approach
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.11.2019, in: Engineering Fracture Mechanics. 221, 15 S., 106630.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Elektronische Veröffentlichung vor Drucklegung
Deformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen forming
Sala, S. T., Bock, F. E., Pöltl, D., Klusemann, B., Huber, N. & Kashaev, N., 08.12.2023, (Elektronische Veröffentlichung vor Drucklegung) in: Journal of Intelligent Manufacturing. 21 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Diffusion-driven microstructure evolution in OpenCalphad
Herrnring, J., Sundman, B. & Klusemann, B., 01.04.2020, in: Computational Materials Science. 175, 10 S., 109236.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditions
Examilioti, T. N., Karanikolas, D., Riekehr, S., Al-Hamdany, N., Papanikos, P., Klusemann, B., Kashaev, N. & Alexopoulos, N. D., 23.01.2024, in: Engineering Fracture Mechanics. 295, 20 S., 109811.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198
Examilioti, T. N., Kashaev, N., Ventzke, V., Klusemann, B. & Alexopoulos, N. D., 01.08.2021, in: Materials Characterization. 178, 14 S., 111257.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheets
Sala, S. T., Keller, S., Chupakhin, S., Pöltl, D., Klusemann, B. & Kashaev, N., 01.07.2022, in: Journal of Materials Processing Technology. 305, 16 S., 117578.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of laser peening process parameters and sequences on residual stress profiles
Kallien, Z., Keller, S., Ventzke, V., Kashaev, N. & Klusemann, B., 04.06.2019, in: Metals. 9, 6, 14 S., 655.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steel
Bergmann, L. A., Batistão, B. F., de Alcântara, N. G., Gargarella, P. & Klusemann, B., 01.09.2022, in: Welding in the World. 66, 9, S. 1747-1756 10 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of the gap width in AZ31 magnesium alloy joints obtained by friction stir welding
Chiuzuli, F. R., Batistão, B. F., Bergmann, L. A., Alcântara, N. G. D., dos Santos, J. F., Klusemann, B. & Gargarella, P., 01.11.2021, in: Journal of Materials Research and Technology. 15, S. 5297-5306 10 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Elektronische Veröffentlichung vor Drucklegung
Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases
de Castro, C. C., Neves, A. M. & Klusemann, B., 17.04.2024, (Elektronische Veröffentlichung vor Drucklegung) in: Journal of Magnesium and Alloys. 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy
Wang, J., Fu, B., Bergmann, L., Liu, F. & Klusemann, B., 01.2023, in: Journal of Materials Engineering and Performance. 32, 2, S. 577-586 10 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets
Janga, V. S. R., Awang, M., Yamin, M. F., Suhuddin, U. F. H., Klusemann, B. & dos Santos, J. F., 06.12.2021, in: Materials. 14, 23, 20 S., 7485.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimental and numerical investigation of laser beam-welded Al-Cu-Li joints using micro-mechanical characteristics
Examilioti, T. N., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.07.2022, in: Journal of Materials Research and Technology. 19, S. 2431-2446 16 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimental and numerical investigation of residual stresses in laser shock peened AA2198
Keller, S., Chupakhin, S., Staron, P., Maawad, E., Kashaev, N. & Klusemann, B., 01.05.2018, in: Journal of Materials Processing Technology. 255, S. 294-307 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloys
Bock, F. E., Herrnring, J., Froend, M., Enz, J., Kashaev, N. & Klusemann, B., 01.04.2021, in: Journal of Manufacturing Processes. 64, S. 982-995 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6
Becker, N., dos Santos, J. F. & Klusemann, B., 16.04.2024, in: Engineering Fracture Mechanics. 300, 11 S., 109963.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimentally established correlation of friction surfacing process temperature and deposit geometry
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 15.09.2020, in: Surface and Coatings Technology. 397, 7 S., 126040.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peening
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.07.2019, in: International Journal of Fatigue. 124, S. 265-276 12 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Experimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloy
Sun, R., Keller, S., Zhu, Y., Guo, W., Kashaev, N. & Klusemann, B., 01.04.2021, in: International Journal of Fatigue. 145, 13 S., 106081.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Fatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealant
Bernardi, M., Suhuddin, U. F. H., Fu, B., Gerber, J. P., Bianchi, M., Ostrovsky, I., Sievers, B., Faes, K., Maawad, E., Lazzeri, L., dos Santos, J. F. & Klusemann, B., 01.07.2023, in: International Journal of Fatigue. 172, 107539.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625
Amavisca, C. V., Bergmann, L., Lessa, C. R. D. L., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, in: Scientific Reports. 13, 1, 10 S., 10669.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Fiber laser welding of dissimilar titanium (Ti-6A1-4V/cp-Ti) T-joints and their laser forming process for aircraft application
Froend, M., Fomin, F., Riekehr, S., Alvarez, P., Zubiri, F., Bauer, S., Klusemann, B. & Kashaev, N., 01.11.2017, in: Optics and Laser Technology. 96, S. 123-131 9 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Fourth-order strain-gradient phase mixture model for nanocrystalline fcc materials
Klusemann, B., Bargmann, S. & Estrin, Y., 02.11.2016, in: Modelling and Simulation in Materials Science and Engineering. 24, 8, S. 1-23 23 S., 085016.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Friction Stir Welding of Various Aluminium Alloys to Titanium
Grassel, S. F., Bergmann, L. & Klusemann, B., 29.11.2023, in: Key Engineering Materials. 966, S. 49-54 6 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Friction surfacing of aluminum to steel: Influence of different substrate surface topographies
Roos, A., Metternich, F., Kallien, Z., Baumann, J., Ehrich, J., Kipp, M., Hanke, S., Biermann, D. & Klusemann, B., 01.11.2023, in: Materials and Design. 235, 12 S., 112390.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Fully periodic RVEs for technological relevant composites: Not worth the effort!
Schneider, K., Klusemann, B. & Bargmann, S., 07.2017, in: Journal of Mechanics of Materials and Structures. 12, 4, S. 471-484 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing
Soujon, M., Kallien, Z., Roos, A., Zeller-Plumhoff, B. & Klusemann, B., 01.07.2022, in: Materials and Design. 219, 15 S., 110786.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy
Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Ajantiwalay, T., Overman, N., Fu, W., Li, Y., Bergmann, L., Maawad, E., Klusemann, B., Santos, J. F. D. & Devaraj, A., 20.12.2022, in: Journal of Alloys and Compounds. 928, 9 S., 167007.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Hybrid modelling by machine learning corrections of analytical model predictions towards high-fidelity simulation solutions
Bock, F. E., Keller, S., Huber, N. & Klusemann, B., 10.04.2021, in: Materials. 14, 8, 19 S., 1883.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Improved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot welding
Fu, B., Shen, J., Suhuddin, U. F. H. R., Chen, T., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.10.2021, in: Scripta Materialia. 203, 6 S., 114113.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits
Ehrich, J., Roos, A., Klusemann, B. & Hanke, S., 05.07.2021, in: Materials Science and Engineering A. 819, 141407.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Investigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel (R) 625
Landell, R. M., de Lima Lessa, C. R., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F. & Klusemann, B., 01.03.2021, in: Welding in the World. 65, 3, S. 393-403 11 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Investigation of microstructural and mechanical properties in AA2024-T351 multi-layer friction surfacing
Hoffmann, M., Roos, A. & Klusemann, B., 30.03.2024, in: Surface and Coatings Technology. 480, 11 S., 130610.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding
Fomin, F., Frönd, M., Ventzke, V., Alvarez, P., Bauer, S. & Kashaev, N., 01.07.2018, in: The International Journal of Advanced Manufacturing Technology. 97, 5-8, S. 2019-2031 13 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Microstructure and Microhardness of Wire-based Laser Metal Deposited AA5087 using an Ytterbium Fibre Laser
Frönd, M., Ventzke, V., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 09.2018, in: Materials Characterization. 143, S. 59-67 9 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Microstructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal deposition
Froend, M., Ventzke, V., Dorn, F., Kashaev, N., Klusemann, B. & Enz, J., 20.01.2020, in: Materials Science and Engineering A. 772, 13 S., 138635.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion
Suhuddin, U. F. H., Rath, L., Halak, R. M. & Klusemann, B., 01.11.2023, in: Materials Characterization. 205, 13 S., 113252.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Microstructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery application
Gera, D., Fu, B., Suhuddin, U. F. H. R., Plaine, A., Alcantara, N., dos Santos, J. F. & Klusemann, B., 01.07.2021, in: Journal of Materials Research and Technology. 13, S. 2272-2286 15 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Modeling of temperature- and strain-driven intermetallic compound evolution in an Al-Mg system via a multiphase-field approach with application to refill friction stir spot welding
Raza, S. H., Mittnacht, T., Diyoke, G., Schneider, D., Nestler, B. & Klusemann, B., 01.12.2022, in: Journal of the Mechanics and Physics of Solids. 169, 105059.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Modeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid technique
Herrnring, J., Sundman, B., Staron, P. & Klusemann, B., 15.08.2021, in: Acta Materialia. 215, 14 S., 117053.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy
Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Overman, N., Bergmann, L., dos Santos, J. F., Staron, P., Maawad, E., Klusemann, B., Mathaudhu, S. & Devaraj, A., 20.12.2021, in: Journal of Alloys and Compounds. 887, 13 S., 161351.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Multiphase-field modeling of temperature-driven intermetallic compound evolution in an Al-Mg system for application to solid-state joining processes
Raza, S. H. & Klusemann, B., 12.2020, in: Modelling and Simulation in Materials Science and Engineering. 28, 8, 085003.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Multiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082
Herrnring, J., Staron, P., Kashaev, N. & Klusemann, B., 11.2018, in: Materialia. 3, S. 243-255 13 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures
Abbaszadeh, M., Hönnige, J. R., Martina, F., Neto, L., Kashaev, N., Colegrove, P., Williams, S. & Klusemann, B., 15.08.2019, in: Journal of Materials Engineering and Performance. 28, 8, S. 4931-4942 12 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Numerical simulation of friction extrusion: process characteristics and material deformation due to friction
Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 05.2024, in: International Journal of Material Forming. 17, 3, 13 S., 26.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions
Examilioti, T. N., Li, W., Kashaev, N., Ventzke, V., Klusemann, B., Tiryakioğlu, M. & Alexopoulos, N. D., 01.05.2023, in: Journal of Materials Research and Technology. 24, S. 895-908 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
On the application of laser shock peening for retardation of surface fatigue cracks in laser beam-welded AA6056
Kashaev, N., Ushmaev, D., Ventzke, V., Klusemann, B. & Fomin, F., 01.07.2020, in: Fatigue and Fracture of Engineering Materials and Structures. 43, 7, S. 1500-1513 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
On the influence of laser beam welding parameters for autogenous AA2198 welded joints
Examilioti, T., Kashaev, N., Enz, J., Klusemann, B. & Alexopoulos, N. D., 01.09.2020, in: The International Journal of Advanced Manufacturing Technology. 110, 7-8, S. 2079-2092 14 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Phase-field modelling for fatigue crack growth under laser shock peening-induced residual stresses
Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.08.2021, in: Archive of Applied Mechanics. 91, 8, S. 3709-3723 15 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Process Development for Wire-based Laser Metal Deposition of 5087 Aluminium alloy by using Fibre Laser
Frönd, M., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 08.2018, in: Journal of Manufacturing Processes. 34, Part A, S. 721-732 12 S., 34.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Process parameter assessment on the dissimilar deposition of AA2024-T351 on AA7475-T761 by friction surfacing
Brandes, A. C., Roos, A., Klusemann, B., Martins, J. D. P., dos Santos, J. F. & Carvalho, A. L. M., 01.11.2023, in: Journal of Materials Research and Technology. 27, S. 7593-7605 13 S.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet
- Erschienen
Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel
Fu, B., Shen, J., Suhuddin, U. F. H. R., Pereira, A. A. C., Maawad, E., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.11.2021, in: Materials and Design. 209, 18 S., 109997.Publikation: Beiträge in Zeitschriften › Zeitschriftenaufsätze › Forschung › begutachtet