Institute for production technology and systems
Organisational unit: Institute
- Professorship for Engineering, in particular Modelling and Simulation of Technical Systems and Processes
- Professorship for Machine Tools
- Professorship for Manufacturing – Innovative Manufacturing
- Professorship for materials mechanics
- Professorship for Materials Technology, in particular of Magnesium Materials
- Professorship for Process Measurement Technology and Intelligent Systems
- Professorship for Product Development and Design
- Professorship of Control and Drive Systems
- Professorship of Production Management
Organisation profile
The members of the Institute for Production Technology and Systems (IPTS) carry out work on a wide range of engineering-related research questions.
When it comes to subjects, the members of the Institute concentrate on the topics of supply chain management and production management, as well as on measurement, control, plasma, production and material technology. Within these fields, we aim to answer current research questions through both experimental work and the use of digital modelling. Our overarching goal here is to provide better solution strategies for complex problems within the field of engineering.
- 2023
- Published
Design of an Over-Actuated Hexacopter Tilt-Rotor for Landing and Coupling in Power Transmission Lines
Leal Lopes, V. M., Honório, L. M., Santos, M. F., Pancoti, A. A. N., Silva, M. F., Diniz, L. F. & Mercorelli, P., 01.06.2023, In: Drones. 7, 6, 26 p., 341.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process
Jin, F., Fu, B., Shen, J., Li, J., Li, W., Santos, J. F. D. & Klusemann, B., 01.06.2023, In: Materials Characterization. 200, 112911.Research output: Journal contributions › Journal articles › Research
- Published
Remote Labs in Electrical Engineering to address heterogeneous student competencies in undergraduate Engineering Education
Block, B-M., Haus, B., von Geyso, T. & Steenken, A., 22.05.2023, EDUCON 2023 - IEEE Global Engineering Education Conference, Proceedings: Salmiya, Kuwait, 1-4 May 2023, American University of Kuwait; Conference proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 7 p. (IEEE Global Engineering Education Conference; vol. 2023).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
ML-basierte Absatzprognose mit Frühindikatoren
Lopez, D. H., Kramer, K. & Schmidt, M., 16.05.2023, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 118, 5, p. 324-329 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Friction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint properties
Rodrigues, C. F., Blaga, L. & Klusemann, B., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 4639-4649 11 p.Research output: Journal contributions › Journal articles › Research
- Published
On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions
Examilioti, T. N., Li, W., Kashaev, N., Ventzke, V., Klusemann, B., Tiryakioğlu, M. & Alexopoulos, N. D., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 895-908 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Circular Supply Chain Management in the Wind Energy Industry - A Systematic Literature Review
Kramer, K. & Schmidt, M., 26.04.2023, Manufacturing Driving Circular Economy: Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin. Kohl, H., Seliger, G. & Dietrich, F. (eds.). Cham: Springer Schweiz, p. 85-93 9 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing
Kallien, Z., Roos, A., Knothe-Horstmann, C. & Klusemann, B., 26.04.2023, In: Materials Science & Engineering A. 871, 11 p., 144872.Research output: Journal contributions › Journal articles › Research
- Published
Experimental investigation of the fluid-structure interaction during deep drawing of fiber metal laminates in the in-situ hybridization process
Kruse, M. & Ben Khalifa, N., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). MaterialsResearchForum LLC, Vol. 28. p. 977-986 10 p. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties
Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Modeling of 3D fluid-structure-interaction during in-situ hybridization of double-curved fiber-metal-laminates
Poppe, C. T., Kruse, M. & Kärger, L., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Krakow: MaterialsResearchForum LLC, p. 219-230 12 p. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Process characteristics of constrained friction processing of AM50 magnesium alloy
de Castro, C. C., Shen, J., Dos Santos, J. F. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 3. p. 1739-1746 8 p. 188. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Process simulation of friction extrusion of aluminum alloys
Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Modeling Interactions and Dependencies in Production Planning and Control: An Approach for a Systematic Description
Mütze, A., Lebbing, S., Hillnhagen, S., Schmidt, M. & Nyhuis, P., 04.03.2023, Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA ’22) . von Leipzig, K., Sacks, N. & Clelland, M. M. (eds.). Cham: Springer Schweiz, p. 31-44 14 p. (Lecture Notes in Production Engineering; vol. Part F1162).Research output: Contributions to collected editions/works › Chapter › peer-review
- Published
Analysis of a phase‐field finite element implementation for precipitation
Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, In: PAMM. 22, 1, 6 p., e202200238.Research output: Journal contributions › Conference article in journal › Research
- Published
Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing
Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Research Perspectives and Innovative Applications for Sustainable Engineering Education
Block, B. M. & Guerne, M. G., 23.02.2023, Learning in the Age of Digital and Green Transition: Proceedings of the 25th International Conference on Interactive Collaborative Learning (ICL2022). Auer, M. E., Pachatz, W. & Rüütmann, T. (eds.). Cham: Springer, Vol. Volume 2. p. 505-515 11 p. (Lecture Notes in Networks and Systems; vol. 634).Research output: Contributions to collected editions/works › Chapter › peer-review
- Published
Barrel Finishing of Magnesium Alloys
Petersen, N., Wiese, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 101-106 6 p. (The Minerals, Metals & Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring Tests
Maier, P., Pamidi, E., Clausius, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 73-80 8 p. (The Minerals, Metals & Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research
- Published
KI-Kanban-Behälter: Mobile, dezentrale Logistikdatenerfassung mittels Edge-ML
Rokoss, A., Popkes, L., Kramer, K., Green, T. & Schmidt, M., 11.02.2023, In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb. 118, 1-2, p. 59-63 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Investigations on the tensile deformation of pure Mg and Mg–15Gd alloy by in-situ X-ray synchrotron radiation and visco-plastic self-consistent modeling
Xu, Y., Huang, Y., Wang, Y., Gan, W., Wang, S., Maawad, E., Schell, N. & Hort, N., 01.02.2023, In: Journal of Magnesium and Alloys. 11, 2, p. 607-613 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Investigation of the friction behavior between dry/infiltrated glass fiber fabric and metal sheet during deep drawing of fiber metal laminates
Kruse, M., Werner, H. O., Chen, H., Mennecart, T., Liebig, W. V., Weidenmann, K. A. & Ben Khalifa, N., 02.2023, In: Production Engineering. 17, 1, p. 37-46 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Metastable–Stable
Hort, N., 02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 11-13 3 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion
Taghipour, A., Mazaheri, Y., McDavid, J., Sheikhi, S., Braun, M., Shen, J., Klusemann, B. & Ehlers, S., 02.2023, In: Advanced Engineering Materials. 25, 4, 16 p., 2201230.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Robust and Optimal Control Designed for Autonomous Surface Vessel Prototypes
Dos Santos, M. F., Dos Santos Neto, A. F., De Mello Honorio, L., Da Silva, M. F. & Mercorelli, P., 25.01.2023, In: IEEE Access. 11, p. 9597-9612 16 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems
Maier, J. T., Schmidt, M., Galizia, F. G., Bortolini, M. & Ferrari, E., 01.01.2023, Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Scholz, S. G., Howlett, R. J. & Setchi, R. (eds.). Springer Singapur, p. 21-32 12 p. (Smart Innovation, Systems and Technologies; vol. 338).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Designing Mg alloys with high strength and ductility by reducing the strength difference between the basal and non-basal slips
Zhou, S., Liu, T., Tang, A., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R. & Pan, F., 01.01.2023, In: Materials and Design. 225, 14 p., 111476.Research output: Journal contributions › Journal articles › Research
- Published
Employing a Novel Metaheuristic Algorithm to Optimize an LSTM Model: A Case Study of Stock Market Prediction
Dastgerdi, A. K. & Mercorelli, P., 01.01.2023, Advances in Computing and Data Sciences: 7th International Conference, ICACDS 2023, Kolkata, India, April 27–28, 2023, Revised Selected Papers. Singh, M., Tyagi, V., Gupta, P. K., Flusser, J. & Ören, T. (eds.). Cham: Springer International Publishing AG, p. 478-489 12 p. (Communications in Computer and Information Science; vol. 1848).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Fostering Circularity: Building a Local Community and Implementing Circular Processes
Schulz, J., Hillnhagen, S. & Schmidt, M., 01.01.2023, How can industrial management contribute to a brighter future?. Deuse, J. (ed.). GITO mbH Verlag, p. 55-75 21 p. (Schriftenreihe der Wissenschaftlichen Gesellschaft für Arbeits- und Betriebsorganisation (WGAB) e. V., ).Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review
- Published
Influence of ISO 9001 on the configuration of production planning and control
Hillnhagen, S., Mütze, A., Nyhuis, P. & Schmidt, M., 01.01.2023, In: Procedia CIRP. 120, p. 1292-1296 5 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates
Kruse, M., Lehmann, J. & Ben Khalifa, N., 01.01.2023, Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Liewald, M., Verl, A., Bauernhansl, T. & Möhring, H-C. (eds.). Cham: Springer, p. 122-130 9 p. (Lecture Notes in Production Engineering; vol. Part F1163).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Simulationsbasierte Untersuchung von Energieflexibilität bei der Optimierung in der Hinterlandentwässerung
Hempel, M. C. & Heger, J., 01.01.2023, ASIM Workshop 2023: STS/GMMS/EDU : Proceedings Langbeiträge : ASIM Fachgruppenworkshop 2023, STS Simulation Technischer Systeme, GMMS Grundlagen und Methoden in Modellbildung und Simulation, EDU Simulation und Edukation, 6.3.-7.3.2023, Universität Magdeburg. Krull, C., Commerell, W., Durak, U., Körner, A. & Pawletta, T. (eds.). Wien: ARGESIM Verlag , p. 143-149 7 p. (ASIM Mitteilung ; vol. 185)(ARGESIM Report; vol. 21).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy
Wang, J., Fu, B., Bergmann, L., Liu, F. & Klusemann, B., 01.2023, In: Journal of Materials Engineering and Performance. 32, 2, p. 577-586 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
A Theory-Based Teaching Concept To Embed Sustainability In The Engineering Curriculum
Block, B-M. & Guerne, M. G., 2023, Book of Proceedings for the 51st Annual Conference of the European Society for Engineering Education: Technological University Dublin 10th -14th September, 2023; Engineering Education for Sustainability. Reilly, G., Murphy, M., Nagy, B. V. & Jarvinen, H-M. (eds.). Brüssel: European Society for Engineering Education (SEFI), p. 1672-1680 9 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Control of a Three-Axis Robot with Super Twisting Sliding Mode Control
Rehbein, J. P., Haus, B. & Mercorelli, P., 2023, 27th International Conference on System Theory, Control and Computing, ICSTCC 2023 - Proceedings. Precup, R-E. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 76-81 6 p. (International Conference on System Theory, Control and Computing, ICSTCC 2023 - Proceedings).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Datenbasierte Bestimmung der Auftragsabwicklungsstrategie
Maier, J. T., 2023, Göttingen: Sierke Verlag. 130 p. (Schriftenreihe Produktionstechnik und -systeme; vol. 21)Research output: Books and anthologies › Monographs › Research
- Published
Dynamically adjusting the k-values of the ATCS rule in a flexible flow shop scenario with reinforcement learning
Heger, J. & Voss, T., 2023, In: International Journal of Production Research. 61, 1, p. 147-161 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Input-Output Linearization of a Thermoelectric Cooler for an Ice Clamping System Using a Dual Extended Kalman Filter
Van Rossum, F., Haus, B., Mercorelli, P. & Aschemann, H., 2023, 2023 27th International Conference on Methods and Models in Automation and Robotics, MMAR 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 199-204 6 p. (International Conference on Methods and Models in Automation and Robotics).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Laser Scanning Point Cloud Improvement by Implementation of RANSAC for Pipeline Inspection Application
Sepulveda-Valdez, C., Sergiyenko, O., Alaniz-Plata, R., Nunez-Lopez, J. A., Tyrsa, V., Flores-Fuentes, W., Rodriguez-Quinonez, J. C., Mercorelli, P., Kolendovska, M., Kartashov, V., Miranda-Vega, J. E. & Murrieta-Rico, F. N., 2023, IECON 2023 - 49th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. (IECON Proceedings (Industrial Electronics Conference)).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Machine Learning Analysis in the Diagnostics of the Dynamics of Ball Bearing with Different Radial Internal Clearance
Ambrożkiewicz, B., Syta, A., Gassner, A., Georgiadis, A., Litak, G. & Meier, N., 2023, Recent Trends in Wave Mechanics and Vibrations : Proceedings of WMVC 2022. Dimitrovová, Z., Gonçalves, R., Biswas, P. & Silva, T. (eds.). Cham: Springer Schweiz, p. 599-606 8 p. (Mechanisms and Machine Science; vol. 125).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Optimization Analysis for an Uncovered Wagon Transportation with an Interactive Animated Simulation-Based Platform for Multidisciplinary Learning
Wohlstein, M. H., Zakharova, E., Block, B. M. & Mercorelli, P., 2023, Proceedings of the 15th International Conference on Computer Supported Education - Volume 2, CSEDU 2023. Jovanovic, J., Chounta, I-A., Uhomoibhi, J. & McLaren, B. (eds.). Science and Technology Publications, Lda (SciTePress), p. 451-457 7 p. (International Conference on Computer Supported Education, CSEDU - Proceedings; vol. 2).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Sliding-Mode-Based Input-Output Linearization of a Peltier Element for Ice Clamping Using a State and Disturbance Observer
van Rossum, F., Haus, B., Mercorelli, P. & Aschemann, H., 2023, 27th International Conference on System Theory, Control and Computing, ICSTCC 2023 - Proceedings. Precup, R-E. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 70-75 6 p. (International Conference on System Theory, Control and Computing, ICSTCC 2023 - Proceedings).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- 2022
- Published
Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy
Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Ajantiwalay, T., Overman, N., Fu, W., Li, Y., Bergmann, L., Maawad, E., Klusemann, B., Santos, J. F. D. & Devaraj, A., 20.12.2022, In: Journal of Alloys and Compounds. 928, 9 p., 167007.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Analysis of the construction of an autonomous robot to improve its energy efficiency when traveling through irregular terrain
Santos-Sanchez, J. O., Rojas-Casas, M. A., Sergiyenko, O., Rodriguez-Quinonez, J. C., Flores-Fuentes, W., Sepulveda-Valdez, C., Alaniz-Plata, R., Tyrsa, V. & Mercorelli, P., 09.12.2022, IECON 2022 - 48th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. (IECON Proceedings (Industrial Electronics Conference)).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
A short review on diffusion coefficients in magnesium alloys and related applications
Shi, H., Huang, Y., Luo, Q., Gavras, S., Willumeit-Römer, R. & Hort, N., 01.12.2022, In: Journal of Magnesium and Alloys. 10, 12, p. 3289-3305 17 p.Research output: Journal contributions › Scientific review articles › Research
- Published
Degradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preforms
Casas-Luna, M., Montufar, E. B., Hort, N., Díaz-de-la-Torre, S., Méndez-García, J. C., Vištejnová, L., Brínek, A., Daňhel, A., Dvořak, K., Kaiser, J. & Čelko, L., 01.12.2022, In: Journal of Magnesium and Alloys. 10, 12, p. 3641-3656 16 p.Research output: Journal contributions › Journal articles › Research
- Published
Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study
Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.Research output: Journal contributions › Journal articles › Research
- Published
Modeling of temperature- and strain-driven intermetallic compound evolution in an Al-Mg system via a multiphase-field approach with application to refill friction stir spot welding
Raza, S. H., Mittnacht, T., Diyoke, G., Schneider, D., Nestler, B. & Klusemann, B., 01.12.2022, In: Journal of the Mechanics and Physics of Solids. 169, 105059.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Property profile development during wire extrusion and wire drawing of magnesium alloys AZ31 and ZX10
Nienaber, M., Braatz, M., Ben Khalifa, N. & Bohlen, J., 01.12.2022, In: Materials and Design. 224, 13 p., 111355.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Robust Control as a Mathematical Paradigm for Innovative Engineering Applications
Mercorelli, P., 01.12.2022, In: Mathematics. 10, 23, 4 p., 4399.Research output: Journal contributions › Other (editorial matter etc.) › Research