1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Noomane Ben Khalifa
  7. //
  8. Publications
  9. //

Noomane Ben Khalifa

Prof. Dr.

Noomane Ben Khalifa

Contact

Prof. Dr. Noomane Ben Khalifa

Links

Advanced search options
Advanced search options

Reset

    to
    1 - 100 out of 149Page size: 100
    1. 2024
    2. Published

      How alloying and processing effects can influence the microstructure and mechanical properties of directly extruded thin zinc wires

      Nienaber, M., Bramkamp, S., Ben Khalifa, N. & Bohlen, J., 07.2024, In: Materials Science and Engineering: A. 905, 12 p., 146720.

      Research output: Journal contributions › Journal articles › Research › peer-review

    3. Published

      Neural network-based estimation and compensation of friction for enhanced deep drawing process control

      Thiery, S., Zein El Abdine, M., Heger, J. & Ben Khalifa, N., 15.05.2024, Material Forming ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024 – held in Toulouse (France), at the Pierre Baudis Convention Center between 24-26th April, 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville: MaterialsResearchForum LLC, p. 1462-1471 10 p. 162. (Materials Research Proceedings; vol. 41).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    4. Published

      Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

      Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 05.2024, In: International Journal of Material Forming. 17, 3, 13 p., 26.

      Research output: Journal contributions › Journal articles › Research › peer-review

    5. Published

      Novel Magnesium Nanocomposite for Wire-Arc Directed Energy Deposition

      Dieringa, H., Nienaber, M., Giannopoulou, D., Isakovic, J., Bohlen, J., Kujur, M. S., Ben Khalifa, N., Klein, T. & Gneiger, S., 20.01.2024, In: Materials. 17, 2, 11 p., 500.

      Research output: Journal contributions › Journal articles › Research › peer-review

    6. Published

      Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals

      Lehmann, J., Keller, S., Esterl, F., Kashaev, N., Klusemann, B. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 352-362 11 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    7. Published

      Development of a Parameterized Model for Additively Manufactured Dies to Control the Strains in Extrudates

      Esterl, F., Nienaber, M., Bohlen, J. & Ben Khalifa, N., 2024, Thirteenth International Aluminum Extrusion Technology Seminar (ET'24): April 30 - May 02 2024, Orlando, Florida, USA. Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 1-8 8 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    8. Published

      Effect of ECAP Process on the Activation of Deformation Mechanisms During Subsequent Uniaxial Tension of Mg-ZEWK2000 Sheets

      Victoria-Hernandez, J., Cano-Castillo, G., Böhm, V., Gruber, M., Volk, W., Ben Khalifa, N. & Letzig, D., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 4. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 4. p. 744-753 10 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    9. Published

      Experimental and Numerical Investigation of the Forming Zone in Dieless Wire Drawing Process of Thin Biometallic Wires

      Braatz, M., Bohlen, J. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, Vol. Volume 1. p. 479-490 12 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    10. Published

      Flow Behavior Investigation during Miniaturized Extrusion of Aluminum (AA6082) and Magnesium (AZ31)

      Nienaber, M., Esterl, F., Lehmann, J., Bohlen, J. & Ben Khalifa, N., 2024, Thirteenth International Aluminum Extrusion Technology Seminar (ET'24): April 30 - May 02 2024, Orlando, Florida, USA. Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 1-7 7 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    11. Published

      Influence of Equal-Channel Angular Pressing on the Microstructure and Texture of Mg-Zn-Y-Zr-RE Alloy Sheets

      Böhm, V., Gruber, M., Abele, E., Steinbauer, C., Victoria-Hernández, J., Letzig, D., Ben Khalifa, N. & Volk, W., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 456-466 11 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    12. Published

      Influence of Process Parameters and Die Design on the Microstructure and Texture Development of Direct Extruded Magnesium Flat Products

      Nienaber, M., Safieh, N., Bohlen, J. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 511-521 11 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    13. Published

      Influencing Parameters in the Deep Drawing of Fiber Metal Laminates with Low Viscous Matrix

      Kruse, M. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 2: ICTP 2023. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer, Vol. 2. p. 124-134 11 p. (Lecture Notes in Mechanical Engineering (LNME)).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    14. Published

      Reduction of Anisotropic Mechanical Properties During Extrusion by Means of Additively Manufactured Dies

      Esterl, F., Nienaber, M., Bohlen, J. & Ben Khalifa, N., 2024, Extended Abstract Book of the 9th JSTP International Seminar on Precision Forging : March 11–14 2024, Kyoto, Japan. Terano, M. & Matsumoto, R. (eds.). Kyoto: Japan Society for Technology of Plasticity, p. 29-30 2 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

    15. 2023
    16. Published

      Permeability and fabric compaction in forming of fiber metal laminates

      Kruse, M., Poppe, C. T., Henning, F. & Ben Khalifa, N., 07.2023, In: Journal of Composite Materials. 57, 16, p. 2593-2608 16 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    17. Published

      Experimental investigation of the fluid-structure interaction during deep drawing of fiber metal laminates in the in-situ hybridization process

      Kruse, M. & Ben Khalifa, N., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). MaterialsResearchForum LLC, Vol. 28. p. 977-986 10 p. (Materials Research Proceedings; vol. 28).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    18. Published

      Process simulation of friction extrusion of aluminum alloys

      Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    19. Published

      Investigation of the friction behavior between dry/infiltrated glass fiber fabric and metal sheet during deep drawing of fiber metal laminates

      Kruse, M., Werner, H. O., Chen, H., Mennecart, T., Liebig, W. V., Weidenmann, K. A. & Ben Khalifa, N., 02.2023, In: Production Engineering. 17, 1, p. 37-46 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    20. Published

      Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates

      Kruse, M., Lehmann, J. & Ben Khalifa, N., 01.01.2023, Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Liewald, M., Verl, A., Bauernhansl, T. & Möhring, H-C. (eds.). Cham: Springer, p. 122-130 9 p. (Lecture Notes in Production Engineering; vol. Part F1163).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    21. 2022
    22. Published

      Property profile development during wire extrusion and wire drawing of magnesium alloys AZ31 and ZX10

      Nienaber, M., Braatz, M., Ben Khalifa, N. & Bohlen, J., 01.12.2022, In: Materials and Design. 224, 13 p., 111355.

      Research output: Journal contributions › Journal articles › Research › peer-review

    23. Published

      Influence of Extrusion Rate on Microstructure and Mechanical Properties of Magnesium Alloy AM60 and an AM60-Based Metal Matrix Nanocomposite

      Giannopoulou, D., Bohlen, J., Ben Khalifa, N. & Dieringa, H., 04.08.2022, In: Nanomaterials. 12, 15, 12 p., 2682.

      Research output: Journal contributions › Journal articles › Research › peer-review

    24. Published

      Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN

      Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    25. Published

      Towards 3D Process Simulation for In Situ Hybridization of Fiber-Metal-Laminates (FML)

      Poppe, C. T., Werner, H. O., Kruse, M., Chen, H., Ben Khalifa, N., Henning, F. & Kärger, L., 22.07.2022, In: Key Engineering Materials. 926, p. 1399-1412 14 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    26. Published

      Werkzeugkonzepte und Methoden für das Strangpressen

      Ben Khalifa, N., Isakovic, J. & Bohlen, J., 28.04.2022, IPC No. B21C25/02, Deutsches Patent- und Markenamt, Patent No. 10 2020 128 163.3, 27.10.2020

      Research output: Patents › Patent

    27. Published

      Formwerkzeug und Verfahren zum Strangpressen von metallischen Werkstoffen

      Ben Khalifa, N., Isakovic, J. & Bohlen, J., 17.02.2022, IPC No. B21C 25/02, Deutsches Patent- und Markenamt, Patent No. 102020128163, 27.10.2020

      Research output: Patents › Patent

    28. Published

      Geometrical Accuracy in Two-Stage Incremental Sheet Forming with Active Medium

      Thiery, S. & Ben Khalifa, N., 2022, Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Behrens, B-A., Brosius, A., Drossel, W-G., Hintze, W., Ihlenfeldt, S. & Nyhuis, P. (eds.). Cham: Springer, p. 65-74 10 p. (Lecture Notes in Production Engineering; vol. Part F1160).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    29. Published

      Process Stability and Reproducibility of the Dieless Drawing Process for AZ31 Magnesium Wires

      Braatz, M., Bohlen, J. & Khalifa, N. B., 2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 389-400 12 p. (Key Engineering Materials; vol. 926 ).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    30. 2021
    31. Published

      Closed-loop control of product geometry by using an artificial neural network in incremental sheet forming with active medium

      Thiery, S., Zein El Abdine, M., Heger, J. & Ben Khalifa, N., 01.11.2021, In: International Journal of Material Forming. 14, 6, p. 1319–1335 17 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    32. Published

      Experimental Setup of Dieless Drawing Process for Magnesium Wire

      Braatz, M., Dieckmann, A., Bohlen, J. & Ben Khalifa, N., 05.09.2021, Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden 2021. Behrens, B-A., Brosius, A., Drossel, W-G., Hintze, W., Ihlenfeldt, S. & Nyhuis, P. (eds.). Cham: Springer Nature Switzerland AG, p. 38-46 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    33. Published

      Homogenization of the interfacial bonding of compound-cast AA7075/6060 bilayer billets by co-extrusion

      Chen, H., Giannopoulou, D., Greß, T., Isakovic, J., Mittler, T., Volk, W. & Ben Khalifa, N., 09.2021, In: International Journal of Material Forming. 14, 5, p. 1109-1119 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    34. Published

      Introducing Residual Stresses on Sheet Metals by Slide Hardening under Stress Superposition

      Lehmann, J., Chen, H., Kruse, M. & Ben Khalifa, N., 27.04.2021, In: Key Engineering Materials. 883, p. 143-150 8 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    35. Published

      Co-extrusion of compound-cast AA7075/6060 bilayer billets at various temperatures

      Chen, H., Giannopoulou, D., Greß, T., Mittler, T., Isakovic, J., Volk, W. & Ben Khalifa, N., 2021, Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Teekaya, E., Vivek, A. & Yoshida, Y. (eds.). Cham: Springer International Publishing AG, p. 993-1001 9 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    36. Published

      Flexible Manufacturing of Concave–Convex Parts by Incremental Sheet Forming with Active Medium

      Thiery, S. & Ben Khalifa, N., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). Cham: Springer, p. 549-561 13 p. (The Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    37. Published

      New concepts of extrusion dies to reduce the anisotropy of extruded profiles by means of additive manufacturing

      Khalifa, N. B., Isakovic, J. & Bohlen, J., 2021, In: CIRP Annals. 70, 1, p. 231-234 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    38. 2020
    39. Published

      Methode zur Erzeugung von diskontinuierlichen Profilquerschnitten durch eine Kombination aus dem Umformverfahren Strangpressen und dem Urformverfahren Kunststoffextrusion: Diskontinuierliche Co-Extrusion

      Stommel, M., Günther, F., Tekkaya, E., Ben Khalifa, N., Dahnke, C., Kloppenborg, T., Schulze, A. & Gebhardt, J., 10.09.2020, IPC No. PCT/DE 2019/000058, Europäisches Patentamt, Patent No. WO2020/177788A1, 07.03.2019

      Research output: Patents › Patent

    40. Published

      Production of aluminum AA7075/6060 compounds by die casting and hot extrusion

      Greß, T., Mittler, T., Chen, H., Stahl, J., Schmid, S., Ben Khalifa, N. & Volk, W., 01.06.2020, In: Journal of Materials Processing Technology. 280, 12 p., 116594.

      Research output: Journal contributions › Journal articles › Research › peer-review

    41. 2019
    42. Published

      Thermal Analysis and Production of As-Cast Al 7075/6060 Bilayer Billets

      Greß, T., Mittler, T., Schmid, S., Chen, H., Ben Khalifa, N. & Volk, W., 01.10.2019, In: International Journal of Metalcasting. 13, 4, p. 817-829 13 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    43. Published

      Analytical prediction of wall thickness reduction and forming forces during the radial indentation process in Incremental Profile Forming

      Grzancic, G., Löbbe, C., Ben Khalifa, N. & Tekkaya, A. E., 05.2019, In: Journal of Materials Processing Technology. 267, p. 68-79 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    44. Published

      Mechanical characterization of as-cast AA7075/6060 and CuSn6/Cu99.5 compounds using an experimental and numerical push-out test

      Greß, T., Stahl, J., Mittler, T., Spano, L., Chen, H., Ben Khalifa, N. & Volk, W., 28.03.2019, In: Materials Science & Engineering A. 751, p. 214-225 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    45. Published

      Analysis of the Influence of Fibers on the Formability of Metal Blanks in Manufacturing Processes for Fiber Metal Laminates

      Mennecart, T., Gies, S., Ben Khalifa, N. & Tekkaya, A. E., 03.2019, In: Journal of Manufacturing and Materials Processing. 3, 1, 15 p., 2.

      Research output: Journal contributions › Journal articles › Research › peer-review

    46. Published

      Incremental sheet forming with active medium

      Ben Khalifa, N. & Thiery, S., 2019, In: CIRP Annals - Manufacturing Technology. 68, 1, p. 313-316 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    47. 2018

    48. Prediction of Process Forces in Fiber Metal Laminate Stamping

      Hahn, M., Ben Khalifa, N. & Shabaninejad, A., 01.03.2018, In: Journal of Manufacturing Science and Engineering. 140, 3, 9 p., 0310021.

      Research output: Journal contributions › Journal articles › Research › peer-review

    49. Thermoplastic fibre metal laminates: Stiffness properties and forming behaviour by means of deep drawing

      Wollmann, T., Hahn, M., Wiedemann, S., Zeiser, A., Jaschinski, J., Modler, N., Ben Khalifa, N., Meißen, F. & Paul, C., 01.02.2018, In: Archives of Civil and Mechanical Engineering. 18, 2, p. 442-450 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    50. Developments and analyses of alternative processes for the manufacturing of fiber metal laminates

      Mennecart, T., Werner, H., Khalifa, N. B. & Weidenmann, K. A., 2018, ASME 2018 13th International Manufacturing Science and Engineering Conference : Volume 2: Materials; Joint MSEC-NAMRC-Manufacturing USA. The American Society of Mechanical Engineers, Vol. 2. 9 p. MSEC2018-6447. (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 2).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    51. 2017

    52. Verfahren zur Herstellung eines Blechkörpers aus wenigstens zwei Blechen

      Tekkaya, A. E., Wernicke, S., Sieczkarek, P., Gies, S. & Ben Khalifa, N., 01.06.2017, IPC No. B21D 53/00 , Patent No. DE102015015388 (A1), 01.12.2015

      Research output: Patents › Patent

    53. Analysis of the forming behaviour of in-situ drawn sandwich sheets

      Mennecart, T., Hiegemann, L. & Ben Khalifa, N., 01.01.2017, In: Procedia Engineering. 207, p. 890-895 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    54. Investigation of new tool design for incremental profile forming

      Grzancic, G., Hiegemann, L. & Ben Khalifa, N., 01.01.2017, In: Procedia Engineering. 207, p. 1767-1772 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    55. Forming-induced damage and its effects on product properties

      Tekkaya, A. E., Ben Khalifa, N., Hering, O., Meya, R., Myslicki, S. & Walther, F., 2017, In: CIRP Annals - Manufacturing Technology. 66, 1, p. 281-284 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    56. Material flow analysis for the incremental sheet-bulk gearing by rotating tools

      Wernicke, S., Sieczkarek, P., Grodotzki, J., Gies, S., Ben Khalifa, N. & Tekkaya, A. E., 2017, Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017 : Processes. The American Society of Mechanical Engineers, Vol. 1. V001T02A061

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    57. 2016

    58. Springback Behavior of Carbon-Fiber-Reinforced Plastic Laminates With Metal Cover Layers in V-Die Bending

      Hahn, M., Ben Khalifa, N., Weddeling, C. & Shabaninejad, A., 01.12.2016, In: Journal of Manufacturing Science and Engineering. 138, 12, 8 p., 121016.

      Research output: Journal contributions › Journal articles › Research › peer-review

    59. Springback prediction and reduction in deep drawing under influence of unloading modulus degradation

      ul Hassan, H., Maqbool, F., Güner, A., Hartmaier, A., Ben Khalifa, N. & Tekkaya, A. E., 01.11.2016, In: International Journal of Material Forming. 9, 5, p. 619-633 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    60. Basic analysis of the incremental profile forming process

      Grzancic, G., Becker, C. & Ben Khalifa, N., 01.09.2016, In: Journal of Manufacturing Science and Engineering. 138, 9, 6 p., 91002.

      Research output: Journal contributions › Journal articles › Research › peer-review

    61. Verfahren und Vorrichtung zur kombinierten Herstellung von Bauteilen mittels inkrementeller Blechumformung und additiver Verfahren in einer Aufspannung

      Hölker, R., Ben Khalifa, N. & Tekkaya, A. E., 24.03.2016, IPC No. B21D 53/00 , Deutsches Patent- und Markenamt, Patent No. DE102014014202A1, 22.09.2014, Priority date 22.09.2014

      Research output: Patents › Patent

    62. Granular media-based tube press hardening

      Chen, H., Güner, A., Ben Khalifa, N. & Tekkaya, A. E., 01.02.2016, In: Journal of Materials Processing Technology. 228, p. 145-159 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    63. Deep drawing of high-strength tailored blanks by using tailored tools

      Mennecart, T., Ul Hassan, H., Güner, A., Ben Khalifa, N. & Hosseini, M., 02.2016, In: Materials. 9, 2, 14 p., 77.

      Research output: Journal contributions › Journal articles › Research › peer-review

    64. Springback behavior of carbon-fiber-reinforced plastic laminates with metal cover layers in v-die bending

      Hahn, M., Weddeling, C., Ben Khalifa, N. & Shabaninejad, A., 2016, Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference - 2016: Processing. The American Society of Mechanical Engineers, Vol. 1. p. V001T02A060

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    65. 2015

    66. Analytical model to determine the strength of form-fit connection joined by die-less hydroforming

      Weddeling, C., Gies, S., Ben Khalifa, N. & Tekkaya, A. E., 01.10.2015, In: Journal of Manufacturing Science and Engineering. 137, 5, 10 p., 051014.

      Research output: Journal contributions › Journal articles › Research › peer-review

    67. Process limits of extrusion of multimaterial components

      Ben Khalifa, N., Foydl, A., Pietzka, D. & Jager, A., 01.10.2015, In: Journal of Manufacturing Science and Engineering. 137, 5, 9 p., 051001.

      Research output: Journal contributions › Journal articles › Research › peer-review

    68. Verfahren zur Herstellung thermoplastischer Faser-Metall-Laminat-Bauteile mittels Umformverfahren sowie entsprechend hergestellte Faser-Metall-Laminat-Bauteile

      André, K., Ben Khalifa, N., Güner, A., Henning, F., Mennecart, T., Rösner, A. & Tekkaya, A. E., 30.07.2015, IPC No. B32B 15/14 , Deutsches Patent- und Markenamt, Patent No. 10 2014 001 132, 27.01.2014, Priority date 30.07.2015, Priority No. DE102014001132A1

      Research output: Patents › Patent

    69. Prediction of roughness after ball burnishing of thermally coated surfaces

      Hiegemann, L., Weddeling, C., Ben Khalifa, N. & Tekkaya, A. E., 03.2015, In: Journal of Materials Processing Technology. 217, p. 193-201 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    70. Chip extrusion with integrated equal channel angular pressing

      Haase, M. & Ben Khalifa, N., 01.01.2015, 60 Excellent Inventions in Metal Forming. Tekkaya, A. E., Homberg, W. & Brosius, A. (eds.). Heidelberg: Springer, p. 261-266 6 p.

      Research output: Contributions to collected editions/works › Contributions to collected editions/anthologies › Research › peer-review

    71. Introduction

      Tekkaya, A. E., Ben Khalifa, N., Hölker, R. & Hiegemann, L., 01.01.2015, 60 Excellent Inventions in Metal Forming. Tekkaya, A. E., Homberg, W. & Brosius, A. (eds.). Berlin, Heidelberg: Springer Vieweg, p. vii-ix 3 p.

      Research output: Contributions to collected editions/works › Other › Research

    72. Approaches for the Simulation of Composite Extrusion - Possibilities and Limits

      Schwane, M., Kloppenborg, T., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2015, In: Materials Today: Proceedings . 2, 10 (Part A), p. 4771-4777 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    73. Basic investigations in incremental profile forming

      Grzancic, G., Becker, C., Ben Khalifa, N. & Tekkaya, A. E., 2015, Proceedings of theASME 10th International Manufacturing Science and Engineering Conference - 2015: Processing. The American Society of Mechanical Engineers, Vol. 1. p. V001T02A095

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    74. Hot Extrusion Dies with Conformal Cooling Channels Produced by Additive Manufacturing

      Hölker, R., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2015, In: Materials Today: Proceedings . 2, 10 (Part A), p. 4838-4846 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    75. Umformen faserverstärkter thermoplastischer Kunststoff-Halbzeuge mit metallischen Deckblechen für den Leichtbau

      Tekkaya, A. E., Hahn, M., Hiegemann, L. & Ben Khalifa, N., 2015, Intermezzo der hybriden Werkstofflösungen - Hat Blech eine Zukunft?, : Tagungsband des 35. EFB-Kolloquiums Blechverarbeitung 2015 am 24. und 25. März 2015 in Bad Boll . Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, p. 185-199 15 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research

    76. 2014

    77. Mechanics of sheet-bulk indentation

      Sieczkarek, P., Isik, K., Ben Khalifa, N., Martins, P. A. F. & Tekkaya, A. E., 11.2014, In: Journal of Materials Processing Technology. 214, 11, p. 2387-2394 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    78. Extrusion of profiles with variable wall thickness

      Selvaggio, A., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 01.01.2014, In: Procedia CIRP. 18, p. 15-20 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    79. Forming of lightweight metal components: Need for new technologies

      Tekkaya, A. E., Ben Khalifa, N., Grzancic, G. & Hölker, R., 01.01.2014, In: Procedia Engineering. 81, p. 28-37 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    80. Residual stresses in continuously reinforced composite profiles with symmetric cross sections

      Schwane, M., Kloppenborg, T., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 01.01.2014, In: Procedia CIRP. 18, p. 126-131 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    81. Additiv hergestellte Strangpresswerkzeuge: Produktivitätssteigerung durch den Einsatz von konturnaher Innenkühlung

      Hölker, R., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, In: wt Werkstattstechnik online. 104, 10, p. 679-685 7 p.

      Research output: Journal contributions › Journal articles › Research

    82. Analytical methodology for the process and joint design of form-fit joining by die-less hydroforming

      Weddeling, C., Gies, S., Khalifa, N. B. & Tekkaya, A. E., 2014, ASME 2014 International Manufacturing Science and Engineering Conference: Proceedings. The American Society of Mechanical Engineers, Vol. 2. 9 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    83. Analytical prediction of roughness after ball burnishing of thermally coated surfaces

      Hiegemann, L., Weddeling, C., Ben Khalifa, N. & Tekkaya, A. E., 2014, In: Procedia Engineering. 81, p. 1921-1926 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    84. Bridge design influences on the pressure conditions in the welding chamber for porthole die extrusion

      Gagliardi, F., Schwane, M., Citrea, T., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, Metal Forming 2014. Micari, F. & Fratini, L. (eds.). Trans Tech Publications, Vol. 622-623. p. 87-94 8 p. (Key Engineering Materials; vol. 622-623).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    85. Composite hot extrusion of functional elements

      Schwane, M., Dahnke, C., Haase, M., Ben Khalifa, N. & Erman Tekkaya, A., 2014, WGP Congress 2014. Merklein, M., Franke, J. & Hagenah, H. (eds.). Trans Tech Publications, Vol. 1018. p. 223-228 6 p. (Advanced Materials Research; vol. 1018).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    86. Control of geometry deviation by stiffness variation in polymer deep drawing tools

      Mennecart, T., Güner, A., Ben Khalifa, N. & Tekkaya, A. E., 2014, New Developments in Sheet Metal Forming Technology. Liewald, M. (ed.). MAT-INFO Werkstoff-Informationsgesellschaft mbH, p. 291-298 8 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    87. Effects of weld line in deep drawing of tailor welded blanks of high strength steels

      Mennecart, T., Güner, A., Ben Khalifa, N. & Tekkaya, A. E., 2014, Material forming - ESAFORM 2014. Larkiola, J. (ed.). Trans Tech Publications, Vol. 611-612. p. 955-962 8 p. (Key Engineering Materials; vol. 611-612).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    88. Extrusion of multi-material components

      Ben Khalifa, N., Foydl, A., Pietzka, D., Jäger, A. & Tekkaya, A. E., 2014, Proceedings of the ASME 9th International Manufacturing Science and Engineering Conference - 2014 : Processing. The American Society of Mechanical Engineers, Vol. 2. p. V002T02A088

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    89. Finite element based determination and optimization of seam weld positions in porthole die extrusion of double hollow profile with asymmetric cross section

      Schwane, M., Kloppenborg, T., Ben Khalifa, N., Jäger, A. & Tekkaya, A. E., 2014, Advances in Hot Metal Extrusion and Simulation of Light Alloys. Erman Tekkaya, A. & Jäger, A. (eds.). Trans Tech Publications, Vol. 585. p. 95-102 8 p. (Key Engineering Materials; vol. 585).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    90. Increased productivity in hot aluminum extrusion by using extrusion dies with inner cooling channels manufactured by rapid tooling

      Hölker, R., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, Material Forming ESAFORM 2014: 17th Conference of the European Scientific Association on Material Forming. Larkiola, J. (ed.). Trans Tech Publications, Vol. 611-612. p. 981-988 8 p. (Key Engineering Materials; vol. 611-612).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    91. Simulation of composite hot extrusion with high reinforcing Volumes

      Schwane, M., Citrea, T., Dahnke, C., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, In: Procedia Engineering. 81, p. 1265-1270 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    92. Strangpressen von Profilen mit variabler Wandstärke

      Selvaggio, A., Haase, M., Ben Khalifa, N. & Tekkaya, A. E., 2014, In: International Aluminium Journal. 90, 11, p. 49-51 3 p.

      Research output: Journal contributions › Journal articles › Research

    93. 2013

    94. Maschinen- und werkzeugseitige Herausforderungen bei der Blechmassivumformung von komplexen Bauteilen

      Salfeld, V., Matthias, T., Krimm, R., Behrens, B-A., Sieczkarek, P., Ben Khalifa, N., Tekkaya, A. E., Hetzner, H., Tremmel, S. & Wartzack, S., 13.11.2013, Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013: 2. Workshop Blechmassivumformung. Merklein, M., Behrens, B. A. & Tekkaya, A. E. (eds.). Meisenbach GmbH Verlag, p. 13-35 23 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    95. Controlling heat balance in hot aluminum extrusion by additive manufactured extrusion dies with conformal cooling channels

      Hölker, R., Jäger, A., Ben Khalifa, N. & Tekkaya, A. E., 08.2013, In: International Journal of Precision Engineering and Manufacturing. 14, 8, p. 1487-1493 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    96. Effect of die design on the welding quality during solid state recycling of AA6060 chips by hot extrusion

      Güley, V., Güzel, A., Jäger, A., Ben Khalifa, N., Tekkaya, A. E. & Misiolek, W. Z., 01.07.2013, In: Materials Science & Engineering A. 574, p. 163-175 13 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    97. Grain size evolution simulation in aluminium alloys AA 6082 and AA 7020 during hot forward extrusion process

      Foydl, A., Segatori, A., Ben Khalifa, N., Donati, L., Brosius, A., Tomesani, L. & Tekkaya, A. E., 01.2013, In: Materials Science and Technology. 29, 1, p. 100-110 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    98. Abbildung des Werkstoffverhaltens von ferritischem Stahl in numerischen Modellen zur Darstellung von Blechmassivumformprozessen bei zyklischen Belastungspfaden

      Faßmann, D., Isik, K., Zeller, S., Beese, S., Ben Khalifa, N., Nürnberger, F., Schaper, M., Tekkaya, A. E., Löhnert, S. & Wriggers, P., 2013, Tagungsband zum 2. Erlanger Workshop Blechmassivumformung 2013: 2. Workshop Blechmassivumformung. Merklein, M., Behrens, B-A. & Tekkaya, A. E. (eds.). Bamberg: Meisenbach GmbH Verlag, p. 69-84 16 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    99. Composite extrusion of thin aluminum profiles with high reinforcing volume

      Pietzka, D., Ben Khalifa, N., Gerke, S. & Tekkaya, E., 2013, ESAFORM Conference on Material Forming, ESAFORM 2013. Alves de Sousa, R. & Valente, R. (eds.). Trans Tech Publications, Vol. 554-557. p. 801-808 8 p. (Key Engineering Materials; vol. 554-557).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    100. Incremental analysis of springback and kinematic hardening by the variation of tension during deep drawing

      ul Hassan, H., Güner, A., Khalifa, N. B. & Tekkaya, A. E., 2013, In: AIP Conference Proceedings. 1567, 1, p. 709-712 4 p.

      Research output: Journal contributions › Conference article in journal › Research

    101. Innovative hybrid process in metal forming

      Jäger, A., Selvaggio, A., Hänisch, S., Haase, M., Becker, C., Kolbe, J., Ben Khalifa, N. & Tekkaya, A. E., 2013, North American Manufacturing Research Conference 2013. North American Manufacturing Research Institute of SME, Vol. 41. p. 205-214 10 p. (Transactions of the North American Manufacturing Research Institution of SME).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    102. Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation

      Schwane, M., Gagliardi, F., Jäger, A., Ben Khalifa, N. & Tekkaya, A. E., 2013, The Current State-of-the-Art on Material Forming. de Sousa, R. A. & Valente, R. (eds.). Scientific.Net , Vol. 554-557. p. 787-793 7 p. (Key Engineering Materials; vol. 554-557).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    103. Novel five-axis forming press for the incremental sheet-bulk metal forming

      Sieczkarek, P., Kwiatkowski, L., Ben Khalifa, N. & Tekkaya, A. E., 2013, ESAFORM Conference on Material Forming, ESAFORM 2013. Trans Tech Publications, Vol. 554-557. p. 1478-1483 6 p. (Key Engineering Materials; vol. 554-557).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    104. Reduction of springback by use of deep drawing tools with locally and temporally varying stiffness

      Mennecart, T., ul Hassan, H., Fruth, J., Wagner, T., Güner, A., Ben Khalifa, N. & Tekkaya, A. E., 2013, TTP2013 conference proceedings: science meets industry - tools and technologies for processing ultra high strength materials . Kolleck, R. (ed.). Verlag Technische Universität Graz, p. 309-320 12 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research

    105. 2012

    106. Compound forging of hot-extruded steel-reinforced aluminum parts

      Pfeiffer, I., Foydl, A., Kammler, M., Matthias, T., Kosch, K. G., Jäger, A., Khalifa, N. B., Tekkaya, A. E. & Behrens, B. A., 11.2012, Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012. Wiley-VCH Verlag, Vol. SPL. ISSUE. p. 159-162 4 p. (Steel Research International).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    107. Strangpresse sowie verfahren zum kontinuierlichen pressen von metall

      Ben Khalifa, N., Muschalik, U., Selvaggio, A. & Tekkaya, A. E., 05.07.2012, IPC No. PCT/DE2011/001698, Patent No. WO2012034554 A3, 14.10.2010, Priority date 14.10.2010

      Research output: Patents › Patent

    108. Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP)

      Haase, M., Ben Khalifa, N., Tekkaya, A. E. & Misiolek, W. Z., 30.03.2012, In: Materials Science & Engineering A. 539, p. 194-204 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    109. High quality extrudates from aluminum chips by new billet compaction and deformation routes

      Misiolek, W. Z., Haase, M., Ben Khalifa, N., Tekkaya, A. E. & Kleiner, M., 01.01.2012, In: CIRP Annals - Manufacturing Technology. 61, 1, p. 239-242 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    110. A review of FEM code accuracy for reliable extrusion process analysis: Extrusion benchmarks 2009 and 2011

      Lorenzo, D., Ben Khalifa, N., Tomesani, L. & Tekkaya, A. E., 2012, Proceedings of the Tenth International Aluminum Extrusion Technology Seminar: Success X Design - Volum I: Extrusion/die practical, extrusion equipment, extrusion/die theoretical . Wauconda: Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 481-491 11 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    111. Effect of Porthole Design and Welding Chamber Dimensions on Material Flow and Weld Deformability of Extruded Aluminium Profiles

      Lorenzo, D., Ben Khalifa, N., Tomesani, L. & Tekkaya, A. E., 2012, Material Forming ESAFORM 2012. Merklein, M. & Hagenah, H. (eds.). Trans Tech Publications, Vol. 504-506. p. 523-528 6 p. (Key Engineering Materials; vol. 504-506).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    112. Experimental and numerical analysis of material flow in porthole die extrusion

      Kloppenborg, T., Schwane, M., Ben Khalifa, N. & Tekkaya, A. E., 2012, International Conference on Extrusion and Benchmark 2011: Progress in Extrusion Technology and Simulation of Light Metal Alloys. Tomesani, L. & Donati, L. (eds.). Trans Tech Publications, Vol. 491. p. 97-104 8 p. (Key Engineering Materials; vol. 491).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    113. Investigation of the dynamic grain structure evolution during hot extrusion of En AW-6082

      Güzel, A., Ben Khalifa, N., Jäger, A. & Tekkaya, A. E., 2012, Proceedings of the Tenth International Aluminum Extrusion Technology Seminar: Success X Design - Volum I. Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 603-609 7 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    Previous 1 2 Next