1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Benjamin Klusemann
  7. //
  8. Publications
  9. //

Benjamin Klusemann

Prof. Dr.

Benjamin Klusemann

Contact

Prof. Dr. Benjamin Klusemann

    Research areas

  • Engineering - mechanics, process simulation, material modeling, Modeling & Simulation, continuum mechanics, finite element method

Links

Advanced search options
Advanced search options

Reset

    to
    1 - 208 out of 208Page size: 500
    1. 2025
    2. Published

      Friction surfacing of aluminum alloys on Ti6Al4V - Investigation of process parameters, material deposition behavior and bonding mechanisms

      Hoffmann, M., Roos, A. & Klusemann, B., 01.05.2025, In: Surface and Coatings Technology. 503, 12 p., 131985.

      Research output: Journal contributions › Journal articles › Research › peer-review

    3. Published

      Impact of friction stir welding-like heat cycles on precipitates in AA7050 analysed by SAXS and numerical modelling

      Henninger, S., Chafle, R., Maawad, E., Klusemann, B., Müller, M. & Staron, P., 01.03.2025, In: Materialia. 39, 8 p., 102343.

      Research output: Journal contributions › Journal articles › Research › peer-review

    4. E-pub ahead of print

      Improving mechanical properties of constrained friction processing Mg-Zn-Ca alloys by modifying texture using multiple pass processing

      Chen, T., Fu, B., Suhuddin, U. F. H. R., Shen, T., Li, G., Maawad, E., Shen, J., Santos, J. F. D., Bergmann, J. P. & Klusemann, B., 01.03.2025, (E-pub ahead of print) In: Journal of Materials Science and Technology.

      Research output: Journal contributions › Journal articles › Research › peer-review

    5. Published

      Effect of ambient conditions in friction surfacing

      Hoffmann, M., Duda, E. A., Aspes, P. & Klusemann, B., 02.2025, In: Welding in the World. 69, 2, p. 397-406 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    6. E-pub ahead of print

      Mechanical behavior, microstructural evolution and texture analysis of AA2024-T351 processed by multi-layer friction surfacing with high build rates

      Hoffmann, M., Roos, A. & Klusemann, B., 29.01.2025, (E-pub ahead of print) In: Progress in Additive Manufacturing. 15 p., 146582.

      Research output: Journal contributions › Journal articles › Research › peer-review

    7. Published

      Enhancement of the mechanical properties of semi-stationary bobbin tool friction stir welded joints in AA2219 through post-weld heat treatment

      Rezende, G. N., Bernardi, M., Hoffmann, M., Bergmann, L., Zepon, G. & Klusemann, B., 01.01.2025, In: Materials Science and Engineering: A. 920, 11 p., 147498.

      Research output: Journal contributions › Journal articles › Research › peer-review

    8. Published

      Deformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen forming

      Sala, S. T., Bock, F. E., Pöltl, D., Klusemann, B., Huber, N. & Kashaev, N., 01.2025, In: Journal of Intelligent Manufacturing. 36, 1, p. 639-659 21 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    9. Accepted/In press

      Thermal Degradation and Decomposition of FR4 Laminate PCB Substrates Joined by Friction Riveting

      Rodrigues, C. F., Blaga, L. & Klusemann, B., 2025, (Accepted/In press) In: Applied Composite Materials. 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    10. 2024
    11. Published

      Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys

      Antunes Duda, E., Kallien, Z., da Silva Soares, S., Hernandez Schneider, T., Ribeiro Piaggio Cardoso, H., Vieira Braga Lemos, G., Falcade, T., Reguly, A. & Klusemann, B., 12.2024, In: Scientific Reports. 14, 1, 10 p., 9882.

      Research output: Journal contributions › Journal articles › Research › peer-review

    12. Published

      Insight into layer formation during friction surfacing: Relationship between deposition behavior and microstructure

      Hoffmann, M., Kallien, Z., Antunes Duda, E. & Klusemann, B., 12.2024, In: Materials Today Communications. 41, 13 p., 110337.

      Research output: Journal contributions › Journal articles › Research › peer-review

    13. Published

      Analysis of mechanical properties and microstructure of single and double-pass friction stir welded T-joints for aluminium stiffened Panels

      Wagner, D., Bernardi, M., Grassel, F., Chen, T., Schimanski, K., Bergmann, L. & Klusemann, B., 11.2024, In: Materials and Design. 247, 11 p., 113438.

      Research output: Journal contributions › Journal articles › Research › peer-review

    14. Published

      Local and global mechanical properties of orbital friction stir welding on API X65 PSL2 steel / Inconel 625 clad pipes

      Volff Amavisca, C., Vieira Braga Lemos, G., Dornelles Ramos, F., Bergmann, L., Reguly, A. & Klusemann, B., 10.2024, In: International Journal of Advanced Manufacturing Technology. 134, 7-8, p. 3325-3336 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    15. Published

      Fatigue crack initiation and propagation in plain and notched PBF-LB/M, WAAM, and wrought 316L stainless steel specimens

      Braun, M., Chen, T., Shen, J., Fassmer, H., Klusemann, B., Sheikhi, S., Ehlers, S., Müller, E., Sarmast, A. & Schubnell, J., 01.08.2024, In: Materials and Design. 244, 18 p., 113122.

      Research output: Journal contributions › Journal articles › Research › peer-review

    16. Published

      Application of Friction Riveting technique for the assembly of electronic components on printed circuit boards (PCB)

      Rodrigues, C. F., Boas, M. C. V., Blaga, L., Bartz, O. & Klusemann, B., 08.2024, In: International Journal of Advanced Manufacturing Technology. 133, 11-12, p. 5163-5173 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    17. Published

      Feasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic composite

      Malaske, L., Blaga, L. A., Bermann, L., Ahmad, B., Zhang, X. & Klusemann, B., 07.2024, In: Journal of Composite Materials. 58, 17, p. 1987-2003 17 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    18. Published

      Ductility and fracture behavior of cold spray additive manufactured zinc

      Huang, C. J., Chen, T., Fu, B. L., Zhang, Z. M., List, A., Wiehler, L., Klusemann, B., Li, W. Y., Gärtner, F. & Klassen, T., 05.06.2024, In: Additive Manufacturing. 89, 16 p., 104310.

      Research output: Journal contributions › Journal articles › Research › peer-review

    19. Published

      CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems

      Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 p., 102692.

      Research output: Journal contributions › Journal articles › Research › peer-review

    20. Published

      Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases

      de Castro, C. C., Neves, A. M. & Klusemann, B., 06.2024, In: Journal of Magnesium and Alloys. 12, 6, p. 2298-2311 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    21. Published

      Behavior of volumetric core defects in friction extrusion of wire from Al-Cu alloy

      Rath, L., Suhuddin, U. F. H. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA: Association of American Publishers, p. 763-770 8 p. (Materials Research Proceedings; vol. 41).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    22. Published

      Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study

      Shen, T., Fu, B., Chen, T., Suhuddin, U. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA: Association of American Publishers, p. 1705-1713 9 p. (Materials Research Proceedings; vol. 41).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    23. Published

      Eigenstrain method in simulations of laser peen forming of curved surfaces

      Poltl, D., Teja Sala, S., Kashaev, N. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville: Association of American Publishers, p. 2355-2363 9 p. (Materials Research Proceedings; vol. 41).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    24. Published

      Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

      Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 05.2024, In: International Journal of Material Forming. 17, 3, 13 p., 26.

      Research output: Journal contributions › Journal articles › Research › peer-review

    25. Published

      Experimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6

      Becker, N., dos Santos, J. F. & Klusemann, B., 16.04.2024, In: Engineering Fracture Mechanics. 300, 11 p., 109963.

      Research output: Journal contributions › Journal articles › Research › peer-review

    26. Published

      Investigation of microstructural and mechanical properties in AA2024-T351 multi-layer friction surfacing

      Hoffmann, M., Roos, A. & Klusemann, B., 30.03.2024, In: Surface and Coatings Technology. 480, 11 p., 130610.

      Research output: Journal contributions › Journal articles › Research › peer-review

    27. Published

      Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy

      Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, In: Journal of Materials Research and Technology. 29, p. 4895-4901 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    28. Published

      Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures

      Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, In: Additive Manufacturing Letters. 8, 8 p., 100184.

      Research output: Journal contributions › Journal articles › Research › peer-review

    29. Published

      Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy

      Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, In: Journal of Magnesium and Alloys. 12, 2, p. 516-529 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    30. Published

      Effect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditions

      Examilioti, T. N., Karanikolas, D., Riekehr, S., Al-Hamdany, N., Papanikos, P., Klusemann, B., Kashaev, N. & Alexopoulos, N. D., 23.01.2024, In: Engineering Fracture Mechanics. 295, 20 p., 109811.

      Research output: Journal contributions › Journal articles › Research › peer-review

    31. Published

      Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing

      Bock, F. E., Kallien, Z., Huber, N. & Klusemann, B., 01.01.2024, In: Computer Methods in Applied Mechanics and Engineering. 418, Part A, 26 p., 116453.

      Research output: Journal contributions › Journal articles › Research

    32. Published

      Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals

      Lehmann, J., Keller, S., Esterl, F., Kashaev, N., Klusemann, B. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 352-362 11 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    33. Published

      EFFECT OF DIFFERENT RESIDUAL STRESS ENGINEERING TECHNIQUES ON THE RESIDUAL STRESS AND FATIGUE CRACK GROWTH BEHAVIOUR IN AA7075

      Lehmann, J., Ventzke, V., Dorn, F., Knothe-Horstmann, C., Klusemann, B., Kashaev, N. & Ben Khalifa, N., 2024, European Conference on Fracture 2024: Book of Abstracts. Bozic, Z., Domazet, Z., Basan, R., Vrdoljak, M. & Andric, M. (eds.). Zagreb: University of Zagreb, p. 410-410 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

    34. Published

      Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024

      Chan, C. Y. C., Suhuddin, U. F. H. R., Rath, L., Bachiega, F. L. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 422-428 7 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    35. Published

      Microstructure refinement by a novel friction-based processing on Mg-Zn-Ca alloy

      Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA : Association of American Publishers, p. 2031-2040 10 p. (Materials Research Proceedings; vol. 41).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    36. Published

      Processability of Mg-Gd Powder via Friction Extrusion

      Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 431-441 11 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    37. 2023
    38. Published

      Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 (Scientific Reports, (2023), 13, 1, (10669), 10.1038/s41598-023-37913-4)

      Amavisca, C. V., Bergmann, L., de, C. R., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 1 p., 11959.

      Research output: Journal contributions › Other (editorial matter etc.) › Research

    39. Published

      Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625

      Amavisca, C. V., Bergmann, L., Lessa, C. R. D. L., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 10 p., 10669.

      Research output: Journal contributions › Journal articles › Research › peer-review

    40. Published

      Friction Stir Welding of Various Aluminium Alloys to Titanium

      Grassel, S. F., Bergmann, L. & Klusemann, B., 29.11.2023, In: Key Engineering Materials. 966, p. 49-54 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    41. Published

      Friction surfacing of aluminum to steel: Influence of different substrate surface topographies

      Roos, A., Metternich, F., Kallien, Z., Baumann, J., Ehrich, J., Kipp, M., Hanke, S., Biermann, D. & Klusemann, B., 01.11.2023, In: Materials and Design. 235, 12 p., 112390.

      Research output: Journal contributions › Journal articles › Research › peer-review

    42. Published

      Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion

      Suhuddin, U. F. H., Rath, L., Halak, R. M. & Klusemann, B., 01.11.2023, In: Materials Characterization. 205, 13 p., 113252.

      Research output: Journal contributions › Journal articles › Research › peer-review

    43. Published

      Process parameter assessment on the dissimilar deposition of AA2024-T351 on AA7475-T761 by friction surfacing

      Brandes, A. C., Roos, A., Klusemann, B., Martins, J. D. P., dos Santos, J. F. & Carvalho, A. L. M., 01.11.2023, In: Journal of Materials Research and Technology. 27, p. 7593-7605 13 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    44. Published

      Refill friction stir spot welding of thermoplastic composites: Case study on Carbon-fiber-reinforced polyphenylene sulfide

      Schäfer, H., Blaga, L. A., Stöver, E. & Klusemann, B., 01.10.2023, In: Thin-Walled Structures. 191, 111037.

      Research output: Journal contributions › Journal articles › Research

    45. Published

      Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys

      Kallien, Z., Hoffmann, M., Roos, A. & Klusemann, B., 10.2023, In: JOM: Journal of The Minerals, Metals & Materials Society. 75, 10, p. 4212-4222 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    46. Published

      Microstructural development of as-cast AM50 during Constrained Friction Processing: grain refinement and influence of process parameters

      de Castro, C. C., Shen, J., dos Santos, J. F. & Klusemann, B., 01.09.2023, In: Journal of Materials Processing Technology. 318, 11 p., 118018.

      Research output: Journal contributions › Journal articles › Research

    47. Published

      Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing

      Escobar, J., Gwalani, B., Silverstein, J., Ajantiwalay, T., Roach, C., Bergmann, L., dos Santos, J. F., Maawad, E., Klusemann, B. & Devaraj, A., 01.08.2023, In: Materials Characterization. 202, 10 p., 112999.

      Research output: Journal contributions › Journal articles › Research

    48. Published

      Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy

      Li, G., Chen, T., Fu, B., Shen, J., Bergmann, L., Zhou, L., Chen, K., Santos, J. F. D. & Klusemann, B., 01.08.2023, In: Journal of Materials Processing Technology. 317, 117984.

      Research output: Journal contributions › Journal articles › Research

    49. Published

      Fatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealant

      Bernardi, M., Suhuddin, U. F. H., Fu, B., Gerber, J. P., Bianchi, M., Ostrovsky, I., Sievers, B., Faes, K., Maawad, E., Lazzeri, L., dos Santos, J. F. & Klusemann, B., 01.07.2023, In: International Journal of Fatigue. 172, 107539.

      Research output: Journal contributions › Journal articles › Research › peer-review

    50. Published

      Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing

      Kallien, Z., Knothe-Horstmann, C. & Klusemann, B., 01.07.2023, In: Additive Manufacturing Letters. 6, 7 p., 100154.

      Research output: Journal contributions › Comments / Debate / Reports › Research

    51. Published

      Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process

      Jin, F., Fu, B., Shen, J., Li, J., Li, W., Santos, J. F. D. & Klusemann, B., 01.06.2023, In: Materials Characterization. 200, 112911.

      Research output: Journal contributions › Journal articles › Research

    52. Published

      Friction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint properties

      Rodrigues, C. F., Blaga, L. & Klusemann, B., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 4639-4649 11 p.

      Research output: Journal contributions › Journal articles › Research

    53. Published

      On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions

      Examilioti, T. N., Li, W., Kashaev, N., Ventzke, V., Klusemann, B., Tiryakioğlu, M. & Alexopoulos, N. D., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 895-908 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    54. Published

      Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing

      Kallien, Z., Roos, A., Knothe-Horstmann, C. & Klusemann, B., 26.04.2023, In: Materials Science & Engineering A. 871, 11 p., 144872.

      Research output: Journal contributions › Journal articles › Research

    55. Published

      Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

      Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    56. Published

      Process characteristics of constrained friction processing of AM50 magnesium alloy

      de Castro, C. C., Shen, J., Dos Santos, J. F. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 3. p. 1739-1746 8 p. 188. (Materials Research Proceedings; vol. 28).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    57. Published

      Process simulation of friction extrusion of aluminum alloys

      Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    58. Published

      Analysis of a phase‐field finite element implementation for precipitation

      Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, In: PAMM. 22, 1, 6 p., e202200238.

      Research output: Journal contributions › Conference article in journal › Research

    59. Published

      Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing

      Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    60. Published

      Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion

      Taghipour, A., Mazaheri, Y., McDavid, J., Sheikhi, S., Braun, M., Shen, J., Klusemann, B. & Ehlers, S., 02.2023, In: Advanced Engineering Materials. 25, 4, 16 p., 2201230.

      Research output: Journal contributions › Journal articles › Research › peer-review

    61. Published

      Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy

      Wang, J., Fu, B., Bergmann, L., Liu, F. & Klusemann, B., 01.2023, In: Journal of Materials Engineering and Performance. 32, 2, p. 577-586 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    62. 2022
    63. Published

      Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy

      Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Ajantiwalay, T., Overman, N., Fu, W., Li, Y., Bergmann, L., Maawad, E., Klusemann, B., Santos, J. F. D. & Devaraj, A., 20.12.2022, In: Journal of Alloys and Compounds. 928, 9 p., 167007.

      Research output: Journal contributions › Journal articles › Research › peer-review

    64. Published

      Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study

      Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.

      Research output: Journal contributions › Journal articles › Research

    65. Published

      Modeling of temperature- and strain-driven intermetallic compound evolution in an Al-Mg system via a multiphase-field approach with application to refill friction stir spot welding

      Raza, S. H., Mittnacht, T., Diyoke, G., Schneider, D., Nestler, B. & Klusemann, B., 01.12.2022, In: Journal of the Mechanics and Physics of Solids. 169, 105059.

      Research output: Journal contributions › Journal articles › Research › peer-review

    66. Published

      Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences

      Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, In: Materials Science & Engineering A. 859, 144227.

      Research output: Journal contributions › Journal articles › Research › peer-review

    67. Published

      A multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloy

      Wang, J., Fu, B., Shen, J., Bergmann, L., Lu, X., dos Santos, J. F. & Klusemann, B., 01.09.2022, In: Journal of Materials Processing Technology. 307, 117679.

      Research output: Journal contributions › Journal articles › Research › peer-review

    68. Published

      Effect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steel

      Bergmann, L. A., Batistão, B. F., de Alcântara, N. G., Gargarella, P. & Klusemann, B., 01.09.2022, In: Welding in the World. 66, 9, p. 1747-1756 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    69. Published

      Tool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheets

      Castro, C. C. D., Shen, J., Plaine, A. H., Suhuddin, U. F. H., Alcântara, N. G. D., Santos, J. F. D. & Klusemann, B., 01.09.2022, In: Journal of Materials Research and Technology. 20, p. 857-866 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    70. Published

      Comparison of Friction Extrusion Processing from Bulk and Chips of Aluminum-Copper Alloys

      Rath, L., Suhuddin, U. F. H. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 471-480 10 p. (Key Engineering Materials; vol. 926).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    71. Published

      Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN

      Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    72. Published

      Experimental Investigation of Efficiency and Deposit Process Temperature During Multi-Layer Friction Surfacing

      Kallien, Z., Roos, A. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 187-193 7 p. (Key Engineering Materials; vol. 926).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    73. Published

      Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens

      Pöltl, D., Keller, S., Chupakhin, S., Sala, S. T., Kashaev, N. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 2293-2302 10 p. (Key Engineering Materials; vol. 926).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    74. Published

      Effect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheets

      Sala, S. T., Keller, S., Chupakhin, S., Pöltl, D., Klusemann, B. & Kashaev, N., 01.07.2022, In: Journal of Materials Processing Technology. 305, 16 p., 117578.

      Research output: Journal contributions › Journal articles › Research › peer-review

    75. Published

      Experimental and numerical investigation of laser beam-welded Al-Cu-Li joints using micro-mechanical characteristics

      Examilioti, T. N., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.07.2022, In: Journal of Materials Research and Technology. 19, p. 2431-2446 16 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    76. Published

      Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing

      Soujon, M., Kallien, Z., Roos, A., Zeller-Plumhoff, B. & Klusemann, B., 01.07.2022, In: Materials and Design. 219, 15 p., 110786.

      Research output: Journal contributions › Journal articles › Research › peer-review

    77. Published

      Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing

      Kallien, Z. & Klusemann, B., 15.05.2022, In: Surface and Coatings Technology. 437, 11 p., 128350.

      Research output: Journal contributions › Journal articles › Research › peer-review

    78. Published

      Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum

      Halak, R. M., Rath, L., Suhuddin, U. F. H. R., dos Santos, J. F. & Klusemann, B., 01.05.2022, In: International Journal of Material Forming. 15, 3, 14 p., 24.

      Research output: Journal contributions › Journal articles › Research › peer-review

    79. Published

      Tailoring powder strengths for enhanced quality of cold sprayed Al6061 deposits

      Huang, C., List, A., Shen, J., Fu, B., Yin, S., Chen, T., Klusemann, B., Gärtner, F. & Klassen, T., 01.03.2022, In: Materials and Design. 215, 18 p., 110494.

      Research output: Journal contributions › Journal articles › Research › peer-review

    80. Published

      Coupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress Prediction

      Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 01.01.2022, In: Metals. 12, 1, 19 p., 107.

      Research output: Journal contributions › Journal articles › Research › peer-review

    81. Published

      Numerical investigation of laser beam-welded AA2198 joints under different artificial ageing conditions

      Examilioti, T., Germanou, A., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.01.2022, In: Procedia Structural Integrity. 42, p. 244-250 7 p.

      Research output: Journal contributions › Conference article in journal › Research

    82. 2021
    83. Published

      Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy

      Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Overman, N., Bergmann, L., dos Santos, J. F., Staron, P., Maawad, E., Klusemann, B., Mathaudhu, S. & Devaraj, A., 20.12.2021, In: Journal of Alloys and Compounds. 887, 13 p., 161351.

      Research output: Journal contributions › Journal articles › Research › peer-review

    84. Published

      Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets

      Janga, V. S. R., Awang, M., Yamin, M. F., Suhuddin, U. F. H., Klusemann, B. & dos Santos, J. F., 06.12.2021, In: Materials. 14, 23, 20 p., 7485.

      Research output: Journal contributions › Journal articles › Research › peer-review

    85. Published

      Simulation of fatigue crack growth in residual‐stress‐afflicted specimen with a phase‐field model

      Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.12.2021, In: PAMM. 21, 1, 2 p., e202100210.

      Research output: Journal contributions › Conference abstract in journal › Research

    86. Published

      Effect of the gap width in AZ31 magnesium alloy joints obtained by friction stir welding

      Chiuzuli, F. R., Batistão, B. F., Bergmann, L. A., Alcântara, N. G. D., dos Santos, J. F., Klusemann, B. & Gargarella, P., 01.11.2021, In: Journal of Materials Research and Technology. 15, p. 5297-5306 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    87. Published

      Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel

      Fu, B., Shen, J., Suhuddin, U. F. H. R., Pereira, A. A. C., Maawad, E., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.11.2021, In: Materials and Design. 209, 18 p., 109997.

      Research output: Journal contributions › Journal articles › Research › peer-review

    88. Published

      Improved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot welding

      Fu, B., Shen, J., Suhuddin, U. F. H. R., Chen, T., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.10.2021, In: Scripta Materialia. 203, 6 p., 114113.

      Research output: Journal contributions › Journal articles › Research › peer-review

    89. Published

      Tailoring of residual stresses by specific use of defined prestress during laser shock peening

      Schwab, K. C., Keller, S., Kashaev, N. & Klusemann, B., 01.09.2021, In: Journal of Materials Processing Technology. 295, 11 p., 117154.

      Research output: Journal contributions › Journal articles › Research › peer-review

    90. Published

      Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints

      Su, Y., Li, W., Shen, J., Fu, B., dos Santos, J. F., Klusemann, B. & Vairis, A., 17.08.2021, In: Materials Science and Engineering A. 823, 141698.

      Research output: Journal contributions › Journal articles › Research › peer-review

    91. Published

      Modeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid technique

      Herrnring, J., Sundman, B., Staron, P. & Klusemann, B., 15.08.2021, In: Acta Materialia. 215, 14 p., 117053.

      Research output: Journal contributions › Journal articles › Research › peer-review

    92. Published

      Empowering materials processing and performance from data and AI

      Chinesta, F., Cueto, E. & Klusemann, B., 06.08.2021, In: Materials. 14, 16, 4 p., 4409.

      Research output: Journal contributions › Other (editorial matter etc.) › Research

    93. Published

      Effect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198

      Examilioti, T. N., Kashaev, N., Ventzke, V., Klusemann, B. & Alexopoulos, N. D., 01.08.2021, In: Materials Characterization. 178, 14 p., 111257.

      Research output: Journal contributions › Journal articles › Research › peer-review

    94. Published

      Phase-field modelling for fatigue crack growth under laser shock peening-induced residual stresses

      Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.08.2021, In: Archive of Applied Mechanics. 91, 8, p. 3709-3723 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    95. Published

      Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits

      Ehrich, J., Roos, A., Klusemann, B. & Hanke, S., 05.07.2021, In: Materials Science and Engineering A. 819, 141407.

      Research output: Journal contributions › Journal articles › Research › peer-review

    96. Published

      Microstructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery application

      Gera, D., Fu, B., Suhuddin, U. F. H. R., Plaine, A., Alcantara, N., dos Santos, J. F. & Klusemann, B., 01.07.2021, In: Journal of Materials Research and Technology. 13, p. 2272-2286 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    97. Published

      Compression behaviour of wire + arc additive manufactured structures

      Abbaszadeh, M., Ventzke, V., Neto, L., Riekehr, S., Martina, F., Kashaev, N., Hönnige, J., Williams, S. & Klusemann, B., 01.06.2021, In: Metals. 11, 6, 18 p., 877.

      Research output: Journal contributions › Journal articles › Research › peer-review

    98. Published

      Hybrid modelling by machine learning corrections of analytical model predictions towards high-fidelity simulation solutions

      Bock, F. E., Keller, S., Huber, N. & Klusemann, B., 10.04.2021, In: Materials. 14, 8, 19 p., 1883.

      Research output: Journal contributions › Journal articles › Research › peer-review

    99. Published

      Evaluation of mechanical property predictions of refill Friction Stir Spot Welding joints via machine learning regression analyses on DoE data

      Bock, F. E., Paulsen, T., Brkovic, N., Rieckmann, L., Kroeger, D., Wolgast, D., Zander, P., Suhuddin, U. F. H., dos Santos, J. F. & Klusemann, B., 02.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 11 p. 2589. (ESAFORM 2021 - 24th International Conference on Material Forming).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    100. Published

      Deformation and Anchoring of AA 2024-T3 rivets within thin printed circuit boards

      Antunes Viallas Boas, M. C., Rodrigues, C. F., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 01.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 12 p. 21.4327. (ESAFORM 2021).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    101. Published

      Experimental and numerical thermo-mechanical analysis of wire-based laser metal deposition of Al-Mg alloys

      Bock, F. E., Herrnring, J., Froend, M., Enz, J., Kashaev, N. & Klusemann, B., 01.04.2021, In: Journal of Manufacturing Processes. 64, p. 982-995 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    102. Published

      Experimental-numerical study of laser-shock-peening-induced retardation of fatigue crack propagation in Ti-17 titanium alloy

      Sun, R., Keller, S., Zhu, Y., Guo, W., Kashaev, N. & Klusemann, B., 01.04.2021, In: International Journal of Fatigue. 145, 13 p., 106081.

      Research output: Journal contributions › Journal articles › Research › peer-review

    103. Published

      Investigation of friction stir welding process applied to ASTM 572 steel plate cladded with Inconel (R) 625

      Landell, R. M., de Lima Lessa, C. R., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F. & Klusemann, B., 01.03.2021, In: Welding in the World. 65, 3, p. 393-403 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    104. Published

      Application of stress intensity factor superposition in residual stress fields considering crack closure

      Keller, S. & Klusemann, B., 15.02.2021, In: Engineering Fracture Mechanics. 243, 13 p., 107415.

      Research output: Journal contributions › Journal articles › Research › peer-review

    105. Published

      Investigation of temperature evolution and flash formation at AA5083 studs during friction surfacing

      Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 05.01.2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 660-665 6 p. (Materials Science Forum; vol. 1016 MSF).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    106. Published

      Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints

      Wen, Q., Li, W., Patel, V., Bergmann, L., Klusemann, B. & dos Santos, J. F., 01.01.2021, In: Acta Metallurgica Sinica (English Letters). 34, 1, p. 125-134 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    107. 2020
    108. Published

      Multiphase-field modeling of temperature-driven intermetallic compound evolution in an Al-Mg system for application to solid-state joining processes

      Raza, S. H. & Klusemann, B., 12.2020, In: Modelling and Simulation in Materials Science and Engineering. 28, 8, 085003.

      Research output: Journal contributions › Journal articles › Research › peer-review

    109. Published

      Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel

      Batistao, B. F., Bergmann, L., Gargarella, P., de Alcantara, N. G., dos Santos, J. F. & Klusemann, B., 01.11.2020, In: Journal of Materials Research and Technology. 9, 6, p. 15132-15142 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    110. Published

      Experimentally established correlation of friction surfacing process temperature and deposit geometry

      Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 15.09.2020, In: Surface and Coatings Technology. 397, 7 p., 126040.

      Research output: Journal contributions › Journal articles › Research › peer-review

    111. Published

      On the influence of laser beam welding parameters for autogenous AA2198 welded joints

      Examilioti, T., Kashaev, N., Enz, J., Klusemann, B. & Alexopoulos, N. D., 01.09.2020, In: The International Journal of Advanced Manufacturing Technology. 110, 7-8, p. 2079-2092 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    112. Published

      Combined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peening

      Sandmann, P., Nielsen, M. A., Keller, S., Maawad, E., Staron, P. & Klusemann, B., 01.08.2020, In: Strain. 56, 4, 17 p., e12338.

      Research output: Journal contributions › Journal articles › Research › peer-review

    113. Published

      On the application of laser shock peening for retardation of surface fatigue cracks in laser beam-welded AA6056

      Kashaev, N., Ushmaev, D., Ventzke, V., Klusemann, B. & Fomin, F., 01.07.2020, In: Fatigue and Fracture of Engineering Materials and Structures. 43, 7, p. 1500-1513 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    114. Published

      Mechanical performance optimization of similar thin AA 7075‐T6 sheets produced by refill friction stir spot welding

      Yamin, M. F., Awang, M., Suhuddin, U. F. H., Sallih, N., Klusemann, B. & dos Santos, J. F., 01.06.2020, In: Materialwissenschaft und Werkstofftechnik. 51, 6, p. 830-835 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    115. Published

      Two-pass friction stir welding of cladded API X65

      de Lima Lessa, C. R., Landell, R. M., Bergmann, L., dos Santos, J. F., Kwietniewski, C. E. F., Reguly, A. & Klusemann, B., 01.05.2020, In: Procedia Manufacturing. 47, p. 1010-1015 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    116. Published

      Friction riveting of 3D printed polyamide 6 with AA 6056-T6

      dos Santos Mallmann, P. H., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 05.2020, In: Procedia Manufacturing. 47, p. 406-412 7 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    117. Published

      Mechanical performance prediction for friction riveting joints of dissimilar materials via machine learning

      Bock, F. E., Blaga, L. A. & Klusemann, B., 05.2020, In: Procedia Manufacturing. 47, p. 615-622 8 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    118. Published

      The influence of laser shock peening on fatigue properties of AA2024-T3 alloy with a fastener hole

      Sikhamov, R., Fomin, F., Klusemann, B. & Kashaev, N., 09.04.2020, In: Metals. 10, 4, 13 p., 495.

      Research output: Journal contributions › Journal articles › Research › peer-review

    119. Published

      Diffusion-driven microstructure evolution in OpenCalphad

      Herrnring, J., Sundman, B. & Klusemann, B., 01.04.2020, In: Computational Materials Science. 175, 10 p., 109236.

      Research output: Journal contributions › Journal articles › Research › peer-review

    120. Published

      Editorial: Machine Learning and Data Mining in Materials Science

      Huber, N., Kalidindi, S. R., Klusemann, B. & Cyron, C. J., 28.02.2020, In: Frontiers in Materials. 7, 3 p., 51.

      Research output: Journal contributions › Other (editorial matter etc.) › Research

    121. Published

      Microstructure by design: An approach of grain refinement and isotropy improvement in multi-layer wire-based laser metal deposition

      Froend, M., Ventzke, V., Dorn, F., Kashaev, N., Klusemann, B. & Enz, J., 20.01.2020, In: Materials Science and Engineering A. 772, 13 p., 138635.

      Research output: Journal contributions › Journal articles › Research › peer-review

    122. Published

      Fatigue crack propagation influenced by laser shock peening introduced residual stress fields in aluminium specimens

      Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.01.2020, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing: Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Niepokolczycki, A. & Komorowski, J. (eds.). Cham, Schweiz: Springer, p. 617-631 15 p. (Lecture Notes in Mechanical Engineering).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    123. Published

      Digitalisierung aus der Perspektive Fachdidaktischer Forschung und Ingenieurwissenschaftlicher Lehrpraxis

      Block, B.-M. & Klusemann, B., 2020, 14. Ingenieurpädagogischen Regionaltagung 2019: Technische Bildung im Kontext von 'Digitalisierung' / 'Automatisierung' - Tendenzen, Möglichkeiten, Perspektiven. Petersen, M. & Kammasch, G. (eds.). Berlin: Ingenieur-Pädagogische Wissenschaftsgesellschaft, p. 147-155 8 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    124. 2019
    125. Published

      Crack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approach

      Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.11.2019, In: Engineering Fracture Mechanics. 221, 15 p., 106630.

      Research output: Journal contributions › Journal articles › Research › peer-review

    126. Published

      Two-step simulation approach for laser shock peening

      Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 11.2019, In: Proceedings in applied mathematics and mechanics. 19, 1, 2 p., e201900497.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    127. Published

      Thermal analysis of wire-based direct energy deposition of Al-Mg using different laser irradiances

      Froend, M., Ventzke, V., Kashaev, N., Klusemann, B. & Enz, J., 01.10.2019, In: Additive Manufacturing. 29, UNSP 100800.

      Research output: Journal contributions › Journal articles › Research › peer-review

    128. Published

      Numerical Investigation of the Effect of Rolling on the Localized Stress and Strain Induction for Wire + Arc Additive Manufactured Structures

      Abbaszadeh, M., Hönnige, J. R., Martina, F., Neto, L., Kashaev, N., Colegrove, P., Williams, S. & Klusemann, B., 15.08.2019, In: Journal of Materials Engineering and Performance. 28, 8, p. 4931-4942 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    129. Published

      Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer deposition

      Shen, J., Hanke, S., Roos, A., Santos, J. F. D. & Klusemann, B., 02.07.2019, In: AIP Conference Proceedings. 2113, 1, 6 p., 150015.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    130. Published

      Numerical study of rolling process on the plastic strain distribution in wire + arc additive manufactured Ti-6Al-4V

      Abbaszadeh, M., Hönnige, J., Martina, F., Kashaev, N., Williams, S. W. & Klusemann, B., 02.07.2019, In: AIP Conference Proceedings. 2113, 1, 6 p., 150019.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    131. Published

      Experimentally validated multi-step simulation strategy to predict the fatigue crack propagation rate in residual stress fields after laser shock peening

      Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.07.2019, In: International Journal of Fatigue. 124, p. 265-276 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    132. Published

      Application of design of experiments for laser shock peening process optimization

      Chupakhin, S., Klusemann, B., Huber, N. & Kashaev, N., 19.06.2019, In: The International Journal of Advanced Manufacturing Technology. 102, 5-8, p. 1567-1581 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    133. Published

      Effect of laser peening process parameters and sequences on residual stress profiles

      Kallien, Z., Keller, S., Ventzke, V., Kashaev, N. & Klusemann, B., 04.06.2019, In: Metals. 9, 6, 14 p., 655.

      Research output: Journal contributions › Journal articles › Research › peer-review

    134. Published

      A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics

      Bock, F. E., Aydin, R. C., Cyron, C. C., Huber, N., Kalidindi, S. R. & Klusemann, B., 15.05.2019, In: Frontiers in Materials. 6, 23 p., 110.

      Research output: Journal contributions › Scientific review articles › Research

    135. Published

      The scaled boundary finite element method for computational homogenization of heterogeneous media

      Talebi, H., Silani, M. & Klusemann, B., 06.04.2019, In: International Journal for Numerical Methods in Engineering. 118, 1, p. 1-17 17 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    136. Published

      Global modelling of the ns-laser shock peening

      Pozdnyakov, V., Keller, S., Klusemann, B., Kashaev, N. & Oberrath, J., 03.2019, DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK) : mit den Fachverbänden (sektionszugehörig): Extraterrestrische Physik, Gravitation und Relativitätstheorie, Physik der Hadronenund Kerne, Theoretische und Mathematische Grundlagen der Physik sowie weiteren Fachverbänden: Geschichte der Physik, Kurzzeit- und angewandte Laserphysik, Plasmaphysik, Umweltphysik und den Arbeitskreisen bzw. der Arbeitsgruppe: Beschleunigerphysik, Chancengleichheit, Junge DPG, Philosophie der Physik. Bad Honnef: Deutsche Physikalische Gesellschaft, p. 151 1 p. K 6.1. (Verhandlung der Deutschen Physikalischen Gesellschaft, Reihe 6; vol. 54, no. 2).

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    137. Published

      Computational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive model

      Raza, S. H., Soyarslan, C., Bargmann, S. & Klusemann, B., 01.02.2019, In: Computer Methods in Applied Mechanics and Engineering. 344, p. 887-909 23 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    138. 2018
    139. Published

      Surface modification methods for fatigue properties improvement of laser-beam-welded Ti-6Al-4V butt joints

      Fomin, F., Klusemann, B. & Kashaev, N., 31.12.2018, In: Procedia Structural Integrity. 13, p. 273-278 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    140. Published

      Experimental investigation of temperature distribution during wire-based laser metal deposition of the Al-Mg alloy 5087

      Frönd, M., Bock, F. E., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 01.12.2018, In: Materials Science Forum. 941, p. 988-994 7 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    141. Published

      Precipitation Kinetics of AA6082: An Experimental and Numerical Investigation

      Herrnring, J., Kashaev, N. & Klusemann, B., 12.2018, In: Materials Science Forum. 941, p. 1411-1417 7 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    142. Published

      Multiscale process simulation of residual stress fields of laser beam welded precipitation hardened AA6082

      Herrnring, J., Staron, P., Kashaev, N. & Klusemann, B., 11.2018, In: Materialia. 3, p. 243-255 13 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    143. Published

      Microstructure and hardness evolution of laser metal deposited AA5087 wall-structures

      Frönd, M., Ventzke, V., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 03.09.2018, In: Procedia CIRP. 74, p. 131-135 5 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    144. Published

      Microstructure and Microhardness of Wire-based Laser Metal Deposited AA5087 using an Ytterbium Fibre Laser

      Frönd, M., Ventzke, V., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 09.2018, In: Materials Characterization. 143, p. 59-67 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    145. Published

      Process Development for Wire-based Laser Metal Deposition of 5087 Aluminium alloy by using Fibre Laser

      Frönd, M., Riekehr, S., Kashaev, N., Klusemann, B. & Enz, J., 08.2018, In: Journal of Manufacturing Processes. 34, Part A, p. 721-732 12 p., 34.

      Research output: Journal contributions › Journal articles › Research › peer-review

    146. Published

      Generation of 3D representative volume elements for heterogeneous materials: A review

      Bargmann, S., Klusemann, B., Schneider, K., Soyarslan, C., Markmann, J., Schnabel, J. E. & Wilmers, J., 01.07.2018, In: Progress in Materials Science. 96, p. 322-384 63 p.

      Research output: Journal contributions › Scientific review articles › Research

    147. Published

      Fatigue Life Extension of AA2024 Specimens and Integral Structures by Laser Shock Peening

      Kashaev, N., Chupakhin, S., Ventzke, V., Horstmann, M., Riekehr, S., Barbini, A., dos Santos, J., Keller, S., Klusemann, B. & Huber, N., 25.05.2018, MATEC Web of Conferences: 12th International Fatigue Congress (FATIGUE 2018) . G, H. (ed.). EDP Sciences, Vol. 165. 6 p. 18001. (MATEC Web of Conferences; vol. 165).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    148. Published

      Stability of phase transformation models for Ti-6Al-4V under cyclic thermal loading imposed during laser metal deposition

      Klusemann, B. & Bambach, M., 02.05.2018, In: AIP Conference Proceedings. 1960, 1, 140012.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    149. Published

      Thermal analysis of laser additive manufacturing of aluminium alloys: Experiment and simulation

      Bock, F. E., Frönd, M., Herrnring, J., Enz, J., Kashaev, N. & Klusemann, B., 02.05.2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018: ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). American Institute of Physics Inc., 6 p. 140004. (AIP Conference Proceedings; vol. 1960, no. 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    150. Published

      Experimental and numerical investigation of residual stresses in laser shock peened AA2198

      Keller, S., Chupakhin, S., Staron, P., Maawad, E., Kashaev, N. & Klusemann, B., 01.05.2018, In: Journal of Materials Processing Technology. 255, p. 294-307 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    151. 2017
    152. Published

      Fiber laser welding of dissimilar titanium (Ti-6A1-4V/cp-Ti) T-joints and their laser forming process for aircraft application

      Froend, M., Fomin, F., Riekehr, S., Alvarez, P., Zubiri, F., Bauer, S., Klusemann, B. & Kashaev, N., 01.11.2017, In: Optics and Laser Technology. 96, p. 123-131 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    153. Published

      Fully periodic RVEs for technological relevant composites: Not worth the effort!

      Schneider, K., Klusemann, B. & Bargmann, S., 07.2017, In: Journal of Mechanics of Materials and Structures. 12, 4, p. 471-484 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    154. Published

      Artificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drilling

      Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 01.04.2017, In: The Journal of Strain Analysis for Engineering Design. 52, 3, p. 137-151 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    155. Published

      Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy

      Examilioto, T., Klusemann, B., Kashaev, N., Riekehr, S., Enz, J. & Alexopoulos, N., 01.01.2017, In: Procedia Structural Integrity. 5, p. 13-18 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    156. Published

      Application of Adaptive Element-Free Galerkin Method to Simulate Friction Stir Welding of Aluminum

      Talebi, H., Froend, M. & Klusemann, B., 01.01.2017, In: Procedia Engineering. 207, p. 580-585 6 p., 137838.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    157. Published

      Finite element modeling of laser beam welding for residual stress calculation

      Herrnring, J. & Klusemann, B., 2017, In: Proceedings in applied mathematics and mechanics. 17, 1, p. 415 - 416 2 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    158. Published

      Laser shock peening process modelling and experimental validation of AA2198-T3 and AA2198-T8

      Keller, S., Kashaev, N. & Klusemann, B., 2017, In: Proceedings in applied mathematics and mechanics. 17, 1, p. 423 - 424 2 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    159. 2016
    160. Published

      Fourth-order strain-gradient phase mixture model for nanocrystalline fcc materials

      Klusemann, B., Bargmann, S. & Estrin, Y., 02.11.2016, In: Modelling and Simulation in Materials Science and Engineering. 24, 8, p. 1-23 23 p., 085016.

      Research output: Journal contributions › Journal articles › Research › peer-review

    161. Published

      Modeling of microstructural pattern formation in crystal plasticity

      Klusemann, B., 25.10.2016, In: Proceedings in applied mathematics and mechanics. 16, 1, p. 361-362 2 p.

      Research output: Journal contributions › Journal articles › Research

    162. Published

      The effect of yield surface curvature change by cross hardening on forming limit diagrams of sheets

      Soyarslan, C., Klusemann, B. & Bargmann, S., 01.10.2016, In: International Journal of Mechanical Sciences. 117, p. 53-66 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    163. Published

      Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites

      Schneider, K., Klusemann, B. & Bargmann, S., 01.09.2016, In: Advances in Engineering Software. 99, p. 177-188 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    164. Application of neural network for correction of hole drilling plasticity effect when measuring LSP induced residual stresses

      Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 2016, Book of Abstracts of the 6th International Conference on Laser Peening and Related Phenomena (6TH ICLPRP). Polese, C. (ed.). University of the Witwatersrand, p. 15 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    165. Automatic generation and meshing of periodic representative volume elements for matrix-inclusions composites

      Schneider, K., Klusemann, B. & Bargmann, S., 2016, Data-driven modeling and numerical simulation of microstructured materials (GAMM AG DATA): Kick-Off Workshop, 26/27 September 2016, Stuttgart, Germany, Book of Abstracts . G. A. G. (ed.). Universität Stuttgart, p. 8 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

    166. Database enhanced acceleration method based on multivariate simplicial interpolation for material-dominated calculations

      Klusemann, B. & Herrnring, J., 2016, Data-driven modeling and numerical simulation of microstructured materials: Kick-Off Workshop, 26/27 September 2016, Stuttgart, Germany, Book of abstracts. G. A. G. (ed.). Universität Stuttgart, p. 18 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

    167. Published

      Experimental and numerical study of laser shock peening process of AA2198-T3 and AA2198-T8

      Klusemann, B., Keller, S., Huber, N. & Kashaev, N., 2016, Book of Abstracts of the 6th International Conference on Laser Peening and Related Phenomena (6TH ICLPRP). Polese, C. (ed.). University of the Witwatersrand, p. 13 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    168. Published

      Influences of RVE topology, discretization and boundary conditions in practical multiscaling - a comparison

      Schneider, K., Klusemann, B. & Bargmann, S., 2016, Book of Abstract for Joint Annual Meeting of GAMM and DMV: March 7-11, 2016; Braunschweig, Germany. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 175 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    169. Published

      Modeling of microstructural pattern formation in crystal plasticity

      Klusemann, B., 2016, Book of Abstract of the Joint Annual Meeting of GAMM and DMV. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 621 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    170. Published

      Study of intrinsic and extrinsic size effects on shear bands in metallic glasses

      Klusemann, B., Soyarslan, C. & Bargmann, S., 2016, Contributions to the Foundations of Multidisciplinary Research in Mechanics: Papers presented during the 24th International Congress of Theoretical and Applied Mechanics ICTAM2016, Montreal, 22-26, 2016. Floryan, J. M. (ed.). International Union for Theoretical and Applied Mechanics, Vol. 3. p. 2524-2525 2 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    171. 2015

    172. Acceleration of material-dominated calculations via phase-space simplicial subdivision and interpolation

      Klusemann, B. & Ortiz, M., 27.07.2015, In: International Journal for Numerical Methods in Engineering. 103, 4, p. 256-274 19 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    173. A directional modification of the Levkovitch-Svendsen cross-hardening model based on the stress deviator

      Soyarslan, C., Klusemann, B. & Bargmann, S., 07.2015, In: Mechanics of Materials. 86, p. 21-30 10 p., 2391.

      Research output: Journal contributions › Journal articles › Research › peer-review

    174. Thermomechanical characterization of Portevin-Le Châtelier bands in AlMg3 (AA5754) and modeling based on a modified Estrin-McCormick approach

      Klusemann, B., Fischer, G., Böhlke, T. & Svendsen, B., 04.2015, In: International Journal of Plasticity. 67, p. 192-216 25 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    175. The plastic yield and flow behavior in metallic glasses

      Thamburaja, P., Klusemann, B., Adibi, S. & Bargmann, S., 02.02.2015, In: Applied Physics Letters. 106, 5, 051903.

      Research output: Journal contributions › Journal articles › Research › peer-review

    176. Characterization of the microstructure evolution in IF-Steel and AA6016 during plane-strain tension and simple shear

      Gerstein, G., Klusemann, B., Bargmann, S. & Schaper, M., 15.01.2015, In: Materials. 8, 1, p. 285-301 17 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    177. Automatic generation of periodic representative volume elements for matrix-inclusion composites and their efficiency in multiscaling

      Schneider, K., Klusemann, B. & Bargmann, S., 2015, Proceedings of the NSCM28. Berezovski, A., Tamm, K. & Peets, T. (eds.). Tallinn University of Technology, p. 153-156 4 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research

    178. 2014

    179. Inherent and induced anisotropic finite visco-plasticity with applications to the forming of DC06 sheets

      Behrouzi, A., Soyarslan, C., Klusemann, B. & Bargmann, S., 12.2014, In: International Journal of Mechanical Sciences. 89, p. 101-111 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    180. Materials by design: An experimental and computational investigation on the microanatomy arrangement of porous metallic glasses

      Sarac, B., Klusemann, B., Xiao, T. & Bargmann, S., 15.09.2014, In: Acta Materialia. 77, p. 411-422 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    181. Microstructural pattern formation in finite-deformation single-slip crystal plasticity under cyclic loading: Relaxation vs. gradient plasticity

      Klusemann, B. & Kochmann, D. M., 15.08.2014, In: Computer Methods in Applied Mechanics and Engineering. 278, p. 765-793 29 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    182. A computational study of a model of single-crystal strain-gradient viscoplasticity with an interactive hardening relation

      Bargmann, S., Reddy, B. D. & Klusemann, B., 01.08.2014, In: International Journal of Solids and Structures. 51, 15-16, p. 2754-2764 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    183. Computational modelling of submicron-sized metallic glasses

      Bargmann, S., Xiao, T. & Klusemann, B., 02.01.2014, In: Philosophical Magazine. 94, 1, p. 1-19 19 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    184. Non-local modeling of size effects in amorphous metals

      Klusemann, B. & Xiao, T., 2014, PAMM Proceedings in Aplied Mathematics and Mechanics: 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Steinmann, P. & Leugering, G. (eds.). 1 ed. Wiley-Blackwell Publishing, Inc., Vol. 14. p. 527-528 2 p. (Proceedings in Applied Mathematics and Mechanics; vol. 14, no. 1 Special issue).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    185. 2013

    186. Application of non-convex rate dependent gradient plasticity to the modeling and simulation of inelastic microstructure development and inhomogeneous material behavior

      Klusemann, B., Yalçinkaya, T., Geers, M. G. D. & Svendsen, B., 12.2013, In: Computational Materials Science. 80, p. 51-60 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    187. Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture

      Klusemann, B., Svendsen, B. & Vehoff, H., 11.2013, In: International Journal of Plasticity. 50, p. 109-126 18 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    188. Modeling of a thermomechanical process chain for sheet steels

      Barthel, C., Klusemann, B., Denzer, R. & Svendsen, B., 09.2013, In: International Journal of Mechanical Sciences. 74, p. 46-54 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    189. Plastic deformation induced microstructure evolution through gradient enhanced crystal plasticity based on a non-convex Helmholtz energy

      Klusemann, B. & Yalçinkaya, T., 09.2013, In: International Journal of Plasticity. 48, p. 168-188 21 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    190. Modeling and simulation of size effects in metallic glasses with non-local continuum mechanics theory

      Klusemann, B. & Bargmann, S., 01.06.2013, In: Journal of the Mechanical Behavior of Materials. 22, 1-2, p. 51-66 16 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    191. Analysis and comparison of two finite element algorithms for dislocation density based crystal plasticity

      Klusemann, B., Svendsen, B. & Bargmann, S., 2013, In: GAMM Mitteilungen. 36, 2, p. 219-238 20 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    192. 2012

    193. Two models for gradient inelasticity based on non-convex energy

      Klusemann, B., Bargmann, S. & Svendsen, B., 11.2012, In: Computational Materials Science. 64, p. 96-100 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    194. Homogenization methods for multi-phase elastic composites with non-elliptical reinforcements: Comparisons and benchmarks

      Klusemann, B., Böhm, H. J. & Svendsen, B., 07.2012, In: European Journal of Mechanics, A/Solids. 34, p. 21-37 17 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    195. Homogenization modeling of thin-layer-type microstructures

      Klusemann, B. & Svendsen, B., 15.06.2012, In: International Journal of Solids and Structures. 49, 13, p. 1828-1838 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    196. Investigation of the deformation behavior of Fe-3%Si sheet metal with large grains via crystal plasticity and finite-element modeling

      Klusemann, B., Svendsen, B. & Vehoff, H., 02.2012, In: Computational Materials Science. 52, 1, p. 25-32 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    197. Microstructure-based modeling of residual stresses in WC-12Co-sprayed coatings

      Klusemann, B., Denzer, R. & Svendsen, B., 01.2012, In: Journal of Thermal Spray Technology. 21, 1, p. 96-107 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    198. Modeling and simulation of inelastic microstructure development and inhomogeneous material behavior via non-convex rate dependent gradient plasticity

      Klusemann, B., Yalçinkaya, T., Geers, M. & Svendsen, B., 2012, ECCOMAS 2012: Proceedings of the 6th EUROPEAN CONGRESS ON COMPUTATIONAL METHODS IN APPLIED SCIENCES AND ENGINEERING. Yalcinkaya, T. & Svendsen, B. (eds.). Technische Universität Wien, p. 1005-1015 11 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    199. Modeling induced flow anisotropy and phase transformations in air hardening steels

      Barthel, C., Klusemann, B., Denzer, R., Clausmeyer, T. & Svendsen, B., 2012, In: Key Engineering Materials. 504-506, p. 443-448 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    200. Modeling of sheet metals with coarse texture via crystal plasticity

      Klusemann, B., Knorr, A. F., Vehoff, H. & Svendsen, B., 2012, MEMS and Nanotechnology. Shaw, G. A., Prorok, B. C. & Starman, L. A. (eds.). Springer, Vol. 6. p. 101-110 10 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    201. Two model formulations for gradient crystal plasticity

      Klusemann, B., Bargmann, S. & Svendsen, B., 2012, 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Alber, H.-D., Kraynyukova, N. & Tropea, C. (eds.). Wiley-VCH Verlag, p. 815-818 4 p. (PAMM - Proceedings in Applied Mathematics and Mechanics; vol. 12, no. 1 (Supplement)).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    202. 2011

    203. Fast, curvature-based prediction of rolling forces for porous media based on a series of detailed simulations

      Wiederkehr, T., Klusemann, B., Svendsen, B. & Müller, H., 04.2011, In: Advances in Engineering Software. 42, 4, p. 142-150 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    204. Analysis of the mechanical properties of an arc-sprayed WC-FeCSiMn coating: Nanoindentation and simulation

      Tillmann, W., Klusemann, B., Nebel, J. & Svendsen, B., 01.2011, In: Journal of Thermal Spray Technology. 20, 1-2, p. 328-335 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    205. Comparison of modeling approaches based on the microstructure of thermally sprayed coatings

      Klusemann, B. & Svendsen, B., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. Hirt, G. & Tekkaya, A. E. (eds.). Düsseldorf: Verlag Stahleisen GmbH, p. 1253–1258 6 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    206. Modeling and numerical simulation of multiscale behavior in polycrystals via extended crystal plasticity

      Klusemann, B., Bargmann, S. & Svendsen, B., 2011, 82nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Brenn, G., Holzapfel, G. A., Schanz, M. & Steinbach, O. (eds.). Wiley-VCH Verlag, Vol. 11. p. 531–532 3 p. (PAMM - Procedings in Applied Mathematics and Mechanics; vol. 11, no. 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    207. Thermodynamic formulation of models for multiscale crystal plasticity at large deformation

      Klusemann, B., Bargmann, S. & Svendsen, B., 2011, Macro to Nano-scale Inelastic Deformation and Failure of Materials & Multi-scale Modeling: Proceedings of 17. Interna- tional Symposium on Plasticity and its current Applications. Khan, A. (ed.). Fulton: NEAT Press, p. 19-21 3 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    208. 2010

    209. Homogenization approach based on laminates

      Klusemann, B. & Svendsen, B., 16.10.2010, PAMM: 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Wieners, C. (ed.). 1 ed. Wiley-VCH Verlag, Vol. 10. p. 419–420 2 p. (PAMM; vol. 10, no. 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    210. Characterization of grain microstructure development in the aluminum alloy EN AW-6060 during extrusion

      Kayser, T., Klusemann, B., Lambers, H. G., Maier, H. J. & Svendsen, B., 25.09.2010, In: Materials Science & Engineering A. 527, 24-25, p. 6568-6573 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    211. Lengthscale-dependent modelling of ductile failure in metallic microstructures

      Svendsen, B., Klusemann, B. & Hortig, C., 09.2010, In: International Journal of Materials and Structural Integrity. 4, 2-4, p. 141-159 19 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    212. Modelling and simulation of dynamic microstructure evolution of aluminium alloys during thermomechanically coupled extrusion process

      Parvizian, F., Kayser, T., Klusemann, B. & Svendsen, B., 04.2010, In: International Journal of Material Forming. 3, 1, p. 363–366 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    213. An image morphing method for 3D reconstruction and FE-analysis of pore networks in thermal spray coatings

      Wiederkehr, T., Klusemann, B., Gies, D., Müller, H. & Svendsen, B., 02.2010, In: Computational Materials Science. 47, 4, p. 881-889 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    214. Application of crystal plasticity to modeling the deformation behavior of sheet metal mesocrystals

      Klusemann, B., Svendsen, B. & Vehoff, H., 2010, Fifth International Conference Multiscale Materials Modeling - MMM 2010: Proceedings : October 4-8, 2010, Freiburg, Germany. Fraunhofer Verlag, Vol. 5. p. 447 – 450 4 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    215. Arc spraying of WCFeCSiMn cored wires. Part 2: E-Module measurement and simulation

      Nebel, J., Klusemann, B., Tillmann, W. & Svendsen, B., 2010, Thermal Spray 2010: Global Solutions for Future Applications: Proceedings of the International Thermal Spray Conference. Marple, B. R., Agarwal, A., Hyland, M. M., Li, Y.-C., Lima, R. S. & Montavon, G. (eds.). New York: Springer, p. 782–789 18 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    216. Homogenization methods for multi-phase elastic composites: Comparisons and Benchmarks

      Svendsen, B. & Klusemann, B., 2010, In: Technische Mechanik. 30, 4, p. 374-386 13 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    217. Investigation and modeling of the material behavior due to evolving dislocation microstructures in fcc and bcc metals

      Clausmeyer, T., Klusemann, B., Bargmann, S. & Svendsen, B., 2010, Proceedings of the Fifth International Conference Multiscale Materials Modeling MMM2010: Conference Proceedings. Gumbsch, P. & van der Giessen, E. (eds.). Fraunhofer Verlag, p. 384 – 387 4 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research

    218. Modellierung und simulation des material- und mikrostrukturverhaltens thermisch gespritzter schichten

      Klusemann, B. & Svendsen, B., 2010, 3D-Surface Engineering für Werkzeug- systeme der Blechformteilefertigung - Erzeugung, Modellierung, Bearbeitung.: SFB708 - Berichtsband 2007-2010. Tillmann, W. & Nebel, J. (eds.). Verlag Praxiswissen, p. 163–178 163 p. (Sonderforschungsbereich SFB 708).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    219. Multiscale material modeling

      Palnau, V., Hortig, C., Klusemann, B., Bartel, T., Svendsen, B. & Menzel, A., 2010, 1st International Conference on Product Property Prediction. Biermann, D., Tekkaya, A. E. & Tillmann, W. (eds.). Dortmund: Technische Universität Dortmund, p. 45-57 13 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    220. 2009

    221. Experimental and theoretical investigation of the microstructural evolution in aluminium alloys during extrusion

      Kayser, T., Parvizian, F., Klusemann, B. & Svendsen, B., 10.06.2009, Materials Characterisation IV: Computational Methods and Experiments. Mammoli, A. A. & Brebbia, C. A. (eds.). Southampton: WIT Press, p. 209–216 8 p. (WIT Transactions on Engineering Sciences; vol. 64).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    222. Modeling and simulation of the heterogenous material behavior in thermal-sprayed coatings

      Klusemann, B., Hortig, C. & Svendsen, B., 2009, Computational Plasticity X - Fundamentals and Applications: Fundamentals and Applications (CD-ROM). Onate, E., Owen, D. R. J. & Suarez, B. (eds.). International Center for Numerical Methods in Engineering (CIMNE), 2 p. (Computational Plasticity X - Fundamentals and Applications).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    223. Modeling and simulation of the microstructural behaviour in thermal sprayed coatings

      Klusemann, B., Hortig, C. & Svendsen, B., 2009, PAMM 80th Annual Meeting of the International Association of Applied Mathematics and Mechanics . Kalinski, K. J. (ed.). 1 ed. John Wiley & Sons Inc., Vol. 9. p. 421–422 2 p. (PAMM - Proceedings in Applied Mathematics and Mechanics; vol. 9, no. 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    224. Modellierung und simulation des heterogenen materialverhaltens in thermisch gespritzten schichten

      Klusemann, B., 2009, SFB708 - 3. öffentliches Kolloquium: Praxiswissen (3D-Surface Engineering für Werkzeugsysteme der Blechformteilefertigung). Tillmann, W. (ed.). Verlag Praxiswissen, Vol. 3. p. 107 – 115 9 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    225. 2008

    226. Physikalische modellierung und simulation des material- und strukturverhaltens thermisch gespritzter schichten

      Svendsen, B., Hortig, C. & Klusemann, B., 2008, 3D-Surface Engineering fr Werkzeugsysteme der Blechformteile- fertigung, 2: SFB708 - 2. öffentliches Kolloquium: Praxiswissen . Tillmann, W. (ed.). Verlag Praxiswissen, p. 121–132 12 p. (SFB 708).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research

    Recently viewed