Professorship for materials mechanics
Organisational unit: Section
Organisation profile
The professorship "materials mechanics“ focuses on the development of suitable models for different classes of materials based on the physical deformation mechanisms as well as on the modeling and simulation of local production processes. The development of these material models is crucial for the application of new materials, since these models are able to describe the deformation behavior in industrial production processes which allows for their optimization. In particular, local engineering in the context of production processes is of high technological relevance in adjusting local properties. For example, laser material processing and friction stir welding are relevant processes which are investigated. A targeted heat input into the material can be used to control and adjust the properties near the surface. As a result, improved properties, particularly in terms of damage tolerance can be achieved. The complexity of the interaction between the process parameters and material properties leads to high experimental effort, with sophisticated experimental techniques required to determine the influence of the process on the component. Therefore, reliable models are required to reduce the experimental effort. The developed material and process models are used to identify optimal process parameters that produce the desired properties inside the material and structure. The main objective of the professorship is to develop realistic and efficient numerical models which are formulated on basis of the underlying physical mechanisms. The identification of these mechanisms requires interdisciplinary collaborations with scientists from materials science, mechanics and production.The cooperation between the University of Lüneburg and the Helmholtz-Zentrum Geesthacht provides an ideal opportunity to accomplish the goals of this shared professorship.
Topics
modeling of microstructures
process modeling ans simulation of laser shock peening
process modeling and simulation of laser welding
modeling of metallic glasses
modeling of residual stresses
modeling of nano materials
development of homogenization approaches for heterogeneous materials
- Published
A multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloy
Wang, J., Fu, B., Shen, J., Bergmann, L., Lu, X., dos Santos, J. F. & Klusemann, B., 01.09.2022, In: Journal of Materials Processing Technology. 307, 117679.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Analysis of a phase‐field finite element implementation for precipitation
Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, In: PAMM. 22, 1, 6 p., e202200238.Research output: Journal contributions › Conference article in journal › Research
- Published
Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing
Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy
Examilioto, T., Klusemann, B., Kashaev, N., Riekehr, S., Enz, J. & Alexopoulos, N., 01.01.2017, In: Procedia Structural Integrity. 5, p. 13-18 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of Adaptive Element-Free Galerkin Method to Simulate Friction Stir Welding of Aluminum
Talebi, H., Froend, M. & Klusemann, B., 01.01.2017, In: Procedia Engineering. 207, p. 580-585 6 p., 137838.Research output: Journal contributions › Conference article in journal › Research › peer-review
- Published
Application of design of experiments for laser shock peening process optimization
Chupakhin, S., Klusemann, B., Huber, N. & Kashaev, N., 19.06.2019, In: The International Journal of Advanced Manufacturing Technology. 102, 5-8, p. 1567-1581 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, In: Additive Manufacturing Letters. 8, 8 p., 100184.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy
Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, In: Journal of Magnesium and Alloys. 12, 2, p. 516-529 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of stress intensity factor superposition in residual stress fields considering crack closure
Keller, S. & Klusemann, B., 15.02.2021, In: Engineering Fracture Mechanics. 243, 13 p., 107415.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics
Bock, F. E., Aydin, R. C., Cyron, C. C., Huber, N., Kalidindi, S. R. & Klusemann, B., 15.05.2019, In: Frontiers in Materials. 6, 23 p., 110.Research output: Journal contributions › Scientific review articles › Research
- Published
Artificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drilling
Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 01.04.2017, In: The Journal of Strain Analysis for Engineering Design. 52, 3, p. 137-151 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints
Wen, Q., Li, W., Patel, V., Bergmann, L., Klusemann, B. & dos Santos, J. F., 01.01.2021, In: Acta Metallurgica Sinica (English Letters). 34, 1, p. 125-134 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 (Scientific Reports, (2023), 13, 1, (10669), 10.1038/s41598-023-37913-4)
Amavisca, C. V., Bergmann, L., de, C. R., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 1 p., 11959.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites
Schneider, K., Klusemann, B. & Bargmann, S., 01.09.2016, In: Advances in Engineering Software. 99, p. 177-188 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy
Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, In: Journal of Materials Research and Technology. 29, p. 4895-4901 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems
Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 p., 102692.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum
Halak, R. M., Rath, L., Suhuddin, U. F. H. R., dos Santos, J. F. & Klusemann, B., 01.05.2022, In: International Journal of Material Forming. 15, 3, 14 p., 24.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel
Batistao, B. F., Bergmann, L., Gargarella, P., de Alcantara, N. G., dos Santos, J. F. & Klusemann, B., 01.11.2020, In: Journal of Materials Research and Technology. 9, 6, p. 15132-15142 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing
Kallien, Z. & Klusemann, B., 15.05.2022, In: Surface and Coatings Technology. 437, 11 p., 128350.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Combined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peening
Sandmann, P., Nielsen, M. A., Keller, S., Maawad, E., Staron, P. & Klusemann, B., 01.08.2020, In: Strain. 56, 4, 17 p., e12338.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences
Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, In: Materials Science & Engineering A. 859, 144227.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints
Su, Y., Li, W., Shen, J., Fu, B., dos Santos, J. F., Klusemann, B. & Vairis, A., 17.08.2021, In: Materials Science and Engineering A. 823, 141698.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparison of Friction Extrusion Processing from Bulk and Chips of Aluminum-Copper Alloys
Rath, L., Suhuddin, U. F. H. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 471-480 10 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Compression behaviour of wire + arc additive manufactured structures
Abbaszadeh, M., Ventzke, V., Neto, L., Riekehr, S., Martina, F., Kashaev, N., Hönnige, J., Williams, S. & Klusemann, B., 01.06.2021, In: Metals. 11, 6, 18 p., 877.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Computational modeling of amorphous polymers: A Lagrangian logarithmic strain space formulation of a glass–rubber constitutive model
Raza, S. H., Soyarslan, C., Bargmann, S. & Klusemann, B., 01.02.2019, In: Computer Methods in Applied Mechanics and Engineering. 344, p. 887-909 23 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Correction to: Metallurgical aspects of joining commercially pure titanium to Ti-6Al-4V alloy in a T-joint configuration by laser beam welding
Fomin, F., Froend, M., Ventzke, V., Alvarez, P., Bauer, S. & Kashaev, N., 01.10.2018, In: The International Journal of Advanced Manufacturing Technology. 99, 1-4, p. 1059-1059 1 p., 99:1059.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys
Kallien, Z., Hoffmann, M., Roos, A. & Klusemann, B., 10.2023, In: JOM: Journal of The Minerals, Metals & Materials Society. 75, 10, p. 4212-4222 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys
Antunes Duda, E., Kallien, Z., da Silva Soares, S., Hernandez Schneider, T., Ribeiro Piaggio Cardoso, H., Vieira Braga Lemos, G., Falcade, T., Reguly, A. & Klusemann, B., 12.2024, In: Scientific Reports. 14, 10 p., 9882.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Coupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress Prediction
Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 01.01.2022, In: Metals. 12, 1, 19 p., 107.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Crack closure mechanisms in residual stress fields generated by laser shock peening: A combined experimental-numerical approach
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.11.2019, In: Engineering Fracture Mechanics. 221, 15 p., 106630.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing
Bock, F. E., Kallien, Z., Huber, N. & Klusemann, B., 01.01.2024, In: Computer Methods in Applied Mechanics and Engineering. 418, Part A, 26 p., 116453.Research output: Journal contributions › Journal articles › Research
- Published
Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals
Lehmann, J., Keller, S., Esterl, F., Kashaev, N., Klusemann, B. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 352-362 11 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Deformation and Anchoring of AA 2024-T3 rivets within thin printed circuit boards
Antunes Viallas Boas, M. C., Rodrigues, C. F., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 01.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 12 p. 21.4327. (ESAFORM 2021).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- E-pub ahead of print
Deformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen forming
Sala, S. T., Bock, F. E., Pöltl, D., Klusemann, B., Huber, N. & Kashaev, N., 08.12.2023, (E-pub ahead of print) In: Journal of Intelligent Manufacturing. 21 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Diffusion-driven microstructure evolution in OpenCalphad
Herrnring, J., Sundman, B. & Klusemann, B., 01.04.2020, In: Computational Materials Science. 175, 10 p., 109236.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Digitalisierung aus der Perspektive Fachdidaktischer Forschung und Ingenieurwissenschaftlicher Lehrpraxis
Block, B-M. & Klusemann, B., 2020, 14. Ingenieurpädagogischen Regionaltagung 2019: Technische Bildung im Kontext von 'Digitalisierung' / 'Automatisierung' - Tendenzen, Möglichkeiten, Perspektiven. Petersen, M. & Kammasch, G. (eds.). Berlin: Ingenieur-Pädagogische Wissenschaftsgesellschaft, p. 147-155 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Editorial: Machine Learning and Data Mining in Materials Science
Huber, N., Kalidindi, S. R., Klusemann, B. & Cyron, C. J., 28.02.2020, In: Frontiers in Materials. 7, 3 p., 51.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Effect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditions
Examilioti, T. N., Karanikolas, D., Riekehr, S., Al-Hamdany, N., Papanikos, P., Klusemann, B., Kashaev, N. & Alexopoulos, N. D., 23.01.2024, In: Engineering Fracture Mechanics. 295, 20 p., 109811.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198
Examilioti, T. N., Kashaev, N., Ventzke, V., Klusemann, B. & Alexopoulos, N. D., 01.08.2021, In: Materials Characterization. 178, 14 p., 111257.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheets
Sala, S. T., Keller, S., Chupakhin, S., Pöltl, D., Klusemann, B. & Kashaev, N., 01.07.2022, In: Journal of Materials Processing Technology. 305, 16 p., 117578.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of laser peening process parameters and sequences on residual stress profiles
Kallien, Z., Keller, S., Ventzke, V., Kashaev, N. & Klusemann, B., 04.06.2019, In: Metals. 9, 6, 14 p., 655.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steel
Bergmann, L. A., Batistão, B. F., de Alcântara, N. G., Gargarella, P. & Klusemann, B., 01.09.2022, In: Welding in the World. 66, 9, p. 1747-1756 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN
Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of the gap width in AZ31 magnesium alloy joints obtained by friction stir welding
Chiuzuli, F. R., Batistão, B. F., Bergmann, L. A., Alcântara, N. G. D., dos Santos, J. F., Klusemann, B. & Gargarella, P., 01.11.2021, In: Journal of Materials Research and Technology. 15, p. 5297-5306 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- E-pub ahead of print
Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases
de Castro, C. C., Neves, A. M. & Klusemann, B., 17.04.2024, (E-pub ahead of print) In: Journal of Magnesium and Alloys. 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy
Wang, J., Fu, B., Bergmann, L., Liu, F. & Klusemann, B., 01.2023, In: Journal of Materials Engineering and Performance. 32, 2, p. 577-586 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Empowering materials processing and performance from data and AI
Chinesta, F., Cueto, E. & Klusemann, B., 06.08.2021, In: Materials. 14, 16, 4 p., 4409.Research output: Journal contributions › Other (editorial matter etc.) › Research
- Published
Evaluation of mechanical property predictions of refill Friction Stir Spot Welding joints via machine learning regression analyses on DoE data
Bock, F. E., Paulsen, T., Brkovic, N., Rieckmann, L., Kroeger, D., Wolgast, D., Zander, P., Suhuddin, U. F. H., dos Santos, J. F. & Klusemann, B., 02.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 11 p. 2589. (ESAFORM 2021 - 24th International Conference on Material Forming).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets
Janga, V. S. R., Awang, M., Yamin, M. F., Suhuddin, U. F. H., Klusemann, B. & dos Santos, J. F., 06.12.2021, In: Materials. 14, 23, 20 p., 7485.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Experimental and numerical investigation of laser beam-welded Al-Cu-Li joints using micro-mechanical characteristics
Examilioti, T. N., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.07.2022, In: Journal of Materials Research and Technology. 19, p. 2431-2446 16 p.Research output: Journal contributions › Journal articles › Research › peer-review