1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Norbert Hort
  7. //
  8. Publications
  9. //

Norbert Hort

Prof. Dr.

Contact

Prof. Dr. Norbert Hort

Links

Advanced search options
Advanced search options

Reset

    to
    201 - 300 out of 390Page size: 100
    1. 2014

    2. In situ synchrotron radiation diffraction during melting and solidification of Mg-Al alloys containing CaO

      Wiese, B., Mendis, C. L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H. P., Bruckner, R., Kainer, K. U. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 191-195 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    3. Low cycle fatigue properties of extruded Mg10GdxNd alloys

      Tober, G., Maier, P., Müller, S. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 115-120 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    4. Spike-forging of AS-cast TX32 magnesium alloy

      Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 275-279 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    5. Investigation of hot workability behavior of as-cast Mg–5Sn–2Ca (TX52) magnesium alloy through processing map

      Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 01.01.2014, In: Production and Manufacturing Research. 2, 1, p. 241-252 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    6. Experimental and numerical analysis of hot tearing susceptibility for Mg-Y alloys

      Wang, Z., Huang, Y., Srinivasan, A., Liu, Z., Beckmann, F., Kainer, K. U. & Hort, N., 01.2014, In: Journal of Materials Science. 49, 1, p. 353-362 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    7. Crack propagation under bending in cast MglOGdxNd-T4 alloys

      Maier, P., Mendis, C., Wolff, M. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 77-82 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    8. In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)

      Szakacs, G., Wiese, B., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Naira, M., Kainer, K. U. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 213-218 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    9. Magnesium alloy containing silver for degradable biomedical implants

      Lukáč, F., Vlček, M., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kekule, T., Szakács, G., Hort, N. & Kainer, K. U., 2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1086-1091 6 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    10. Mechanical properties and microstructures of nano SiC reinforced ZE10 composites prepared with ultrasonic vibration

      Song, J. F., Dieringa, H., Huang, Y. D., Gan, W. M., Kainer, K. U. & Hort, N., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1019).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    11. Microstructure and compression creep strength of the newly developed magnesium alloy DieMag422

      Dieringa, H., Hort, N. & Kainer, K. U., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 177-183 7 p. (Advanced Materials Research; vol. 1019).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    12. Residual stresses near the hot sprues of as-cast Mg-Zn alloys investigated by STRESS-SPEC neutron diffractometer

      Gan, W. M., Huang, Y. D., Wang, Z., Hort, N. & Hofmann, M., 2014, International Conference on Residual Stresses 9 (ICRS 9). Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Trans Tech Publications Ltd, p. 428-432 5 p. (Materials Science Forum; vol. 768-769).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    13. 2013

    14. Thermodynamic assessment and experimental study of Mg-Gd alloys

      Hampl, M., Blawert, C., Silva Campos, M. R., Hort, N., Peng, Q., Kainer, K. U. & Schmid-Fetzer, R., 25.12.2013, In: Journal of Alloys and Compounds. 581, p. 166-177 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    15. Effect of calcium addition on the hot working behavior of as-cast AZ31 magnesium alloy

      Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 20.12.2013, In: Materials Science and Engineering A. 588, p. 272-279 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    16. Bulk and local textures of pure magnesium processed by rotary swaging

      Gan, W. M., Huang, Y. D., Wang, R., Zhong, Z. Y., Hort, N., Kainer, K. U., Schell, N., Brokmeier, H. G. & Schreyer, A., 01.12.2013, In: Journal of Magnesium and Alloys. 1, 4, p. 341-345 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    17. Compressive strength and hot deformation mechanisms in as-cast Mg-4Al-2Ba-2Ca (ABaX422) alloy

      Rao, K. P., Ip, H. Y., Suresh, K., Prasad, Y. V. R. K., Wu, C. M. L., Hort, N. & Kainer, K. U., 01.12.2013, In: Philosophical Magazine. 93, 35, p. 4364-4377 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    18. Microstructure and mechanical properties of as-cast Mg-Sn-Ca alloys and effect of alloying elements

      Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 12.2013, In: Transactions of Nonferrous Metals Society of China (English Edition). 23, 12, p. 3604-3610 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    19. Comparison of different in vitro tests for biocompatibility screening of Mg alloys

      Scheideler, L., Füger, C., Schille, C., Rupp, F., Wendel, H. P., Hort, N., Reichel, H. P. & Geis-Gerstorfer, J., 11.2013, In: Acta Biomaterialia. 9, 10, p. 8740-8745 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    20. Element distribution in the corrosion layer and cytotoxicity of alloy Mg-10Dy during in vitro biodegradation

      Yang, L., Hort, N., Laipple, D., Höche, D., Huang, Y., Kainer, K. U., Willumeit, R. & Feyerabend, F., 11.2013, In: Acta Biomaterialia. 9, 10, p. 8475-8487 13 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    21. Fast escape of hydrogen from gas cavities around corroding magnesium implants

      Kuhlmann, J., Bartsch, I., Willbold, E., Schuchardt, S., Holz, O., Hort, N., Höche, D., Heineman, W. R. & Witte, F., 11.2013, In: Acta Biomaterialia. 9, 10, p. 8714-8721 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    22. Microstructure, mechanical and corrosion properties of Mg-Dy-Gd-Zr alloys for medical applications

      Yang, L., Huang, Y., Feyerabend, F., Willumeit, R., Mendis, C., Kainer, K. U. & Hort, N., 11.2013, In: Acta Biomaterialia. 9, 10, p. 8499-8508 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    23. Development of a magnesium secondary alloy system for mixed magnesium post-consumer scrap

      Fechner, D., Blawert, C., Hort, N., Dieringa, H. & Kainer, K. U., 01.08.2013, In: Materials Science and Engineering A. 576, p. 222-230 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    24. High temperature deformation and microstructural features of TXA321 magnesium alloy: Correlations with processing map

      Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 08.2013, In: Advanced Engineering Materials. 15, 8, p. 761-766 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    25. Hot workability analysis with processing map and texture characteristics of as-cast TX32 magnesium alloy

      Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 08.2013, In: Journal of Materials Science. 48, 15, p. 5236-5246 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    26. Influences of Y additions on the hot tearing susceptibility of Mg-1.5wt.%Zn alloys

      Wang, Z., Huang, Y. D., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 306-310 5 p. (Materials Science Forum; vol. 765).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    27. Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetry

      Tolnai, D., Szakács, G., Requena, G., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 286-290 5 p. (Materials Science Forum; vol. 765).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    28. Effect of grain size and structure, solid solution elements, precipitates and twinning on nanohardness of Mg-Re alloys

      Maier, P., Richter, A., Tober, G. & Hort, N., 07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 491-495 5 p. (Materials Science Forum; vol. 765).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    29. In situ synchrotron diffraction of the solidification of Mg4Y3Nd

      Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 07.2013, In: Materials Letters. 102-103, p. 62-64 3 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    30. Investigation of biodegradation behaviour of an Mg-1Ca alloy influenced by heat treatment and applying plasma-chemical oxidation layers

      Schmigalla, S., Bender, S., Heyn, A., Hort, N. & Schmidt, J., 07.2013, In: Materials and Corrosion. 64, 7, p. 578-584 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    31. Hot tearing characteristics of binary Mg-Gd alloy castings

      Srinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K. U. & Hort, N., 05.2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 5, p. 2285-2298 14 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    32. Hot tearing susceptibility of binary Mg-Y alloy castings

      Wang, Z., Huang, Y., Srinivasan, A., Liu, Z., Beckmann, F., Kainer, K. U. & Hort, N., 05.2013, In: Materials and Design. 47, p. 90-100 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    33. Nucleation mechanism of Mg17Al12-precipitates in binary Mg-7 wt.% Al alloy

      Lalpoor, M., Dzwonczyk, J. S., Hort, N. & Offerman, S. E., 25.04.2013, In: Journal of Alloys and Compounds. 557, p. 73-76 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    34. Magnesium and Magnesium Alloys

      Sillekens, W. H. & Hort, N., 12.04.2013, Structural Materials and Processes in Transportation. Lehmhus, D., Busse, M., Herrmann, A. S. & Kayvantash, K. (eds.). Wiley-VCH Verlag, p. 113-150 38 p.

      Research output: Contributions to collected editions/works › Chapter › peer-review

    35. Effects of Sn segregation and precipitates on creep response of Mg-Sn alloys

      Huang, Y., Dieringa, H., Kainer, K. U. & Hort, N., 04.2013, In: Fatigue and Fracture of Engineering Materials and Structures. 36, 4, p. 308-315 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    36. Mechanical properties and corrosion behaviour of freestanding, precipitate-free magnesium WE43 thin films

      Schlüter, K., Zamponi, C., Hapke, J., Hort, N., Kainer, K. U. & Quandt, E., 03.2013, In: International Journal of Materials Research. 104, 3, p. 286-292 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    37. Influence of Ce addition on microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy

      Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 01.2013, In: Transactions of Nonferrous Metals Society of China (English Edition). 23, 1, p. 66-72 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    38. A new magnesium alloy system: TEXAS

      Wiese, B., Mendis, C., Blawert, C., Nyberg, E., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 231-235 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    39. Effect of internal defects on tensile properties of A356 casting alloys

      Cheng, J., Hort, N., Kainer, K. U. & Kwak, S., 2013, METAL 2013 - 22nd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1171-1176 6 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    40. Effect of Sn additions on the age hardening response, microstructures and corrosion resistance of Mg-0.8Ca (wt%) alloys

      Mendis, C. L., Tolnai, D., Blawert, C. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 237-241 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    41. High temperature deformation of magnesium alloy TX32-0.4Al-0.8Si

      Dharmendra, C., Rao, K. P., Hort, N. & Kainer, K. U., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 41-45 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    42. In situ synchrotron diffraction of the solidification of Mg-RE alloys

      Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 253-257 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    43. Microstructural approaches of engineering materials: Influences of Dy content and heat treatments on the formation of hydrides in Mg-Dy alloys

      Huang, Y., Yang, L., Wang, Z., Kainer, K. U. & Hort, N., 2013, Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013. University of Patras, p. 971-980 10 p. (Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    44. Microstructure investigation of Mg-10Gd-1La containing alloy subjected to fatigue deformation

      Mendis, C. L., Maier, P., Müller, S., Kainer, K. U. & Hort, N., 2013, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Association for Iron and Steel Technology (AISTECH), p. 1542-1549 8 p. (Materials Science and Technology Conference and Exhibition 2013, MS and T 2013; vol. 3).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    45. Microstructure, mechanical and corrosion properties of Mg-Gd-Zn alloys

      Srinivasa, A., Huang, Y., Mendis, C. L., Dieringa, H., Blawert, C., Kainer, K. U. & Hort, N., 2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 28-32 5 p. (Materials Science Forum; vol. 765).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    46. Nucleation kinetics of the γ-phase in a binary Mg-Al alloy

      Lalpoor, M., Dzwonczyk, J. S., Hort, N. & Offerman, S. E., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S., Neelameggham, N. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 259-262 4 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    47. 2012

    48. Hot tearing susceptibility of magnesium-gadolinium binary alloys

      Srinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K. U. & Hort, N., 12.2012, In: Transactions of the Indian Institute of Metals. 65, 6, p. 701-706 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    49. Influence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloy

      Mert, F., Blawert, C., Kainer, K. U. & Hort, N., 12.2012, In: Corrosion Science. 65, p. 145-151 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    50. Hot working mechanisms and texture development in Mg-3Sn-2Ca-0.4Al alloy

      Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 15.10.2012, In: Materials Chemistry and Physics. 136, 2-3, p. 1081-1091 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    51. Polycrystalline and amorphous MgZnCa thin films

      Schlüter, K., Zamponi, C., Hort, N., Kainer, K. U. & Quandt, E., 10.2012, In: Corrosion Science. 63, p. 234-238 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    52. High ductile as-cast Mg-RE based alloys at room temperature

      Peng, Q., Huang, Y., Kainer, K. U. & Hort, N., 15.09.2012, In: Materials Letters. 83, p. 209-212 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    53. Hot deformation mechanisms in AZ31 Magnesium Alloy Extruded at different temperatures: Impact of Texture

      Rao, K. P., Prasad, Y. V. R. K., Dzwonczyk, J., Hort, N. & Kainer, K. U., 01.09.2012, In: Metals. 2, 3, p. 292-312 21 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    54. Metallurgical characterization of hot tearing curves recorded during solidification of magnesium alloys

      Huang, Y. D., Wang, Z., Srinivasan, A., Kainer, K. U. & Hort, N., 01.09.2012, In: Acta Physica Polonica A. 122, 3, p. 497-500 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    55. Influence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg-Dy alloys

      Yang, L., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K. U. & Hort, N., 09.2012, In: Journal of the Mechanical Behavior of Biomedical Materials. 13, p. 36-44 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    56. Hot deformation behavior of Mg-2Sn-2Ca alloy in as-cast condition and after homogenization

      Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Hort, N. & Kainer, K. U., 30.08.2012, In: Materials Science and Engineering A. 552, p. 444-450 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    57. Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting

      Qiao, Z., Shi, Z., Hort, N., Zainal Abidin, N. I. & Atrens, A., 08.2012, In: Corrosion Science. 61, p. 185-207 23 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    58. Effects of corrosion environment and proteins on magnesium corrosion

      Yang, L., Hort, N., Willumeit, R. & Feyerabend, F., 08.2012, In: Corrosion Engineering Science and Technology. 47, 5, p. 335-339 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    59. The formation of Sr 6.33Mg 16.67Si 13 in magnesium alloy AM50 and its effect on mechanical properties

      Fechner, D., Hort, N., Blawert, C., Dieringa, H., Störmer, M. & Kainer, K. U., 07.2012, In: Journal of Materials Science. 47, 14, p. 5461-5469 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    60. Development of high performance single-phase solid solution magnesium alloy at low temperature

      Peng, Q., Huang, Y., Kainer, K. U. & Hort, N., 03.2012, In: Advanced Engineering Materials. 14, 3, p. 178-184 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    61. Identification of unexpected hydrides in Mg-20 wt% Dy alloy by high-brilliance synchrotron radiation

      Gan, W., Huang, Y., Yang, L., Kainer, K. U., Jiang, M., Brokmeier, H. G. & Hort, N., 02.2012, In: Journal of Applied Crystallography. 45, 1, p. 17-21 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    62. Ion release from magnesium materials in physiological solutions under different oxygen tensions

      Feyerabend, F., Drücker, H., Laipple, D., Vogt, C., Stekker, M., Hort, N. & Willumeit, R., 01.2012, In: Journal of Materials Science: Materials in Medicine. 23, 1, p. 9-24 16 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    63. Deformation microstructures and textures of cast Mg-3Sn-2Ca alloy under uniaxial hot compression

      Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Mechanical Engineering and Materials: ICMEM 2012. Jin, W. (ed.). Scientific.Net , p. 322-325 4 p. (Applied Mechanics and Materials; vol. 152-154).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    64. Mechanical and corrosion properties of as-cast and extruded MG10GD alloy for biomedical application

      Maier, P., Müller, S., Dieringa, H. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S., Sillekens, W. & Neelameggham, N. (eds.). The Minerals, Metals & Materials Society, p. 253-259 7 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    65. Microstructure and creep properties of MEZ magnesium alloy processed by thixocasting

      Morales Garza, E. D., Dieringa, H., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). Cham: Springer Schweiz, p. 385-389 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    66. Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce

      Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 149-154 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    67. Texture evolution during hot deformation processing of Mg-3Sn-2Ca-0.4Al alloy

      Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 295-300 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    68. Ultrasonic stirring as a production process for nanoparticle reinforced magnesium alloys and the compression creep response of ZE10 reinforced with ceria nanoparticles

      Dieringa, H., Hort, N. & Kainer, K. U., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Society for Composite Materials, ESCM, 8 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    69. 2011

    70. Blood triggered corrosion of magnesium alloys

      Geis-Gerstorfer, J., Schille, C., Schweizer, E., Rupp, F., Scheideler, L., Reichel, H. P., Hort, N., Nolte, A. & Wendel, H. P., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1761-1766 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    71. Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluation

      Schille, C., Braun, M., Wendel, H. P., Scheideler, L., Hort, N., Reichel, H. P., Schweizer, E. & Geis-Gerstorfer, J., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1797-1801 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    72. Effect of fetal calf serum on the corrosion behaviour of magnesium alloys

      Hornberger, H., Witte, F., Hort, N. & Mueller, W. D., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1746-1755 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    73. Mechanical and corrosion properties of binary Mg-Dy alloys for medical applications

      Yang, L., Huang, Y., Peng, Q., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1827-1834 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    74. Reprint of: Improved cytotoxicity testing of magnesium materials

      Fischer, J., Pröfrock, D., Hort, N., Willumeit, R. & Feyerabend, F., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1773-1777 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    75. Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions

      Rao, K. P., Prasad, Y. V. R. K., Dharmendra, C., Hort, N. & Kainer, K. U., 25.08.2011, In: Materials Science and Engineering A. 528, 22-23, p. 6964-6970 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    76. Influence of composition on hot tearing in binary mg-zn alloys

      Zhou, L., Huang, Y. D., Mao, P. L., Kainer, K. U., Liu, Z. & Hort, N., 08.2011, In: International Journal of Cast Metals Research. 24, 3-4, p. 170-176 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    77. Improved cytotoxicity testing of magnesium materials

      Fischer, J., Pröfrock, D., Hort, N., Willumeit, R. & Feyerabend, F., 25.06.2011, In: Materials Science and Engineering: B. 176, 11, p. 830-834 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    78. Chemical surface alteration of biodegradable magnesium exposed to corrosion media

      Willumeit, R., Fischer, J., Feyerabend, F., Hort, N., Bismayer, U., Heidrich, S. & Mihailova, B., 06.2011, In: Acta Biomaterialia. 7, 6, p. 2704-2715 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    79. Corrosion behavior of As-Cast binary Mg-Dy alloys

      Yang, L., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 417-421 5 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    80. In situ studies of light metals with synchrotron radiation and neutrons

      Staron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M., Hort, N., Eckerlebe, H., Kainer, K. U., Müller, M. & Schreyer, A., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 192-197 6 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    81. Magnesium permanent mold Castings optimization

      Elsayed, F. R., Hort, N., Salgado-Ordorica, M. A. & Kainer, K., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 65-68 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    82. Modeling Bolt Load Retention of Ca modified AS41 using compliance-creep method

      Anopuo, O., Huang, Y., Hort, N., Kainer, K. U. & Maier, P., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 278-281 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    83. Biodegradable Magnesium Implants - How Do They Corrode in-vivo?

      Witte, F., Hort, N. & Feyerabend, F., 26.04.2011, Magnesium Technology 2011. Sillenkens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). John Wiley & Sons Ltd., p. 17 1 p.

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    84. Magnesium: An essential nutrient for a good biomaterial

      Manuel, M. V. & Hort, N., 04.2011, In: JOM: Journal of The Minerals, Metals & Materials Society. 63, 4, p. 99-99 1 p.

      Research output: Journal contributions › Comments / Debate / Reports › Research

    85. Mechanism of grain refinement of Mg-Al alloys by SiC inoculation

      Huang, Y., Kainer, K. U. & Hort, N., 04.2011, In: Scripta Materialia. 64, 8, p. 793-796 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    86. Magnesium (Mg) corrosion: A challenging concept for degradable implants

      Witte, F., Hort, N., Feyerabend, F. & Vogt, C., 03.2011, Corrosion of Magnesium Alloys. Song, G-L. (ed.). Elsevier Inc., p. 403-425 23 p.

      Research output: Contributions to collected editions/works › Chapter › peer-review

    87. Macrostructure evolution in directionally solidified Mg-RE alloys

      Salgado-Ordorica, M. A., Punessen, W., Yi, S., Bohlen, J., Kainer, K. U. & Hort, N., 28.02.2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 113-118 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    88. Effect of yttrium addition on lattice parameter, Young's modulus and vacancy of magnesium

      Peng, Q., Meng, J., Li, Y., Huang, Y. & Hort, N., 25.02.2011, In: Materials Science and Engineering A. 528, 4-5, p. 2106-2109 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    89. Castability of some magnesium alloys in a novel castability die

      Easton, M. A., Gibson, M. A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T. B. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 61-64 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    90. Compression creep at 240°C of extruded magnesium alloys containing gadolinium

      Dieringa, H., Hort, N., Müller, S. & Kainer, K. U., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 270-273 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    91. Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions

      Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Dharmendra, C., Hort, N. & Kainer, K. U., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 169-174 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    92. Cyclic deformation of newly developed magnesium cast alloys in corrosive environment

      Maier, P., Anopuo, O., Malchau, F., Wienck, G. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 495-498 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    93. Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91

      Zander, D., Heilig, M., Hort, N., Klaus, G., B̈hrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 381-384 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    94. Investigations on hot tearing of Mg-Zn-(Al) alloys

      Zhou, L., Huang, Y., Mao, P., Kainer, K. U., Liu, Z. & Hort, N., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Nealameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 125-130 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    95. Mechanical behaviour and corrosion performance of thin film magnesium WE alloys

      Schlüter, K., Reverey, J., Hort, N., Zamponi, C. & Quandt, E., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 286-289 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    96. Properties and processing of magnesium-tin-calcium alloys

      Hort, N., Huang, Y. D., Leil, T. A., Rao, K. P. & Kainer, K. U., 2011, In: Kovove Materialy. 49, 3, p. 163-177 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    97. 2010

    98. Simulation of stresses during casting of binary magnesium-aluminum alloys

      Pokorny, M. G., Monroe, C. A., Beckermann, C., Zhen, Z. & Hort, N., 12.2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 12, p. 3196-3207 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    99. XPS studies of magnesium surfaces after exposure to Dulbecco's modified eagle medium, Hank's buffered salt solution, and simulated body fluid

      Tie, D., Feyerabend, F., Hort, N., Willumeit, R. & Hoeche, D., 12.2010, In: Advanced Engineering Materials. 12, 12, p. B699-B704 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    100. Bolt load retention and creep response of AS41 alloyed with 0.15% Ca

      Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 08.2010, In: SAE International Journal of Materials and Manufacturing. 3, 1, p. 202-210 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    101. Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines

      Feyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Drücker, H., Vogt, C. & Hort, N., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1834-1842 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    102. Interference of magnesium corrosion with tetrazolium-based cytotoxicity assays

      Fischer, J., Prosenc, M. H., Wolff, M., Hort, N., Willumeit, R. & Feyerabend, F., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1813-1823 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    103. Magnesium alloys as implant materials-Principles of property design for Mg-RE alloys

      Hort, N., Huang, Y., Fechner, D., Störmer, M., Blawert, C., Witte, F., Vogt, C., Drücker, H., Willumeit, R., Kainer, K. U. & Feyerabend, F., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1714-1725 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    104. Effect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloy

      Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 02.2010, In: International Journal of Materials Research. 101, 2, p. 300-306 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    105. Preparation and properties of high purity Mg-Y biomaterials

      Peng, Q., Huang, Y., Zhou, L., Hort, N. & Kainer, K. U., 01.2010, In: Biomaterials. 31, 3, p. 398-403 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    Previous 1 2 3 4 Next