Norbert Hort
Prof. Dr.
Contact
Prof. Dr. Norbert Hort
- Engineering
Research areas
Microstructures and mechanical properties of a hot-extruded Mg−8Gd−3Yb−1.2Zn−0.5Zr (wt%) alloy
Li, B., Guan, K., Yang, Q., Niu, X., Zhang, D., Lv, S., Meng, F., Huang, Y., Hort, N. & Meng, J., 05.03.2019, In: Journal of Alloys and Compounds. 776, p. 666-678 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Microstructures and mechanical properties of pure Mg processed by rotary swaging
Gan, W. M., Huang, Y. D., Wang, R., Wang, G. F., Srinivasan, A., Brokmeier, H. G., Schell, N., Kainer, K. U. & Hort, N., 11.2014, In: Materials and Design. 63, p. 83-88 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
Microstructures, Corrosion and Mechanical Properties of Mg–Si Alloys as Biodegradable Implant Materials
Wang, W., Gao, M., Huang, Y., Tan, L., Yang, K. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 151-157 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microtomography on biomaterials using the harwi-2 beamline at desy
Herzen, J., Beckmann, F., Müller, B., Witte, F., Donath, T., Leukers, B., Irsen, S. H., Störmer, M., Hort, N., Schrott-Fischer, A., Glueckert, R. & Schreyer, A., 2007, In: European Cells and Materials. 13, SUPPL.3, p. 38 1 p.Research output: Journal contributions › Conference abstract in journal › Research › peer-review
Modeling Bolt Load Retention of Ca modified AS41 using compliance-creep method
Anopuo, O., Huang, Y., Hort, N., Kainer, K. U. & Maier, P., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 278-281 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Nanomechanical Analysis and Fractography of Extruded Mg-Dy-Nd Based Alloy Influenced by Solution Heat Treatment
Maier, P., Richter, A., Clausius, B. & Hort, N., 2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 181-187 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
New development in magnesium technology for light weight structures in transportation industries
Göken, J., Bohlen, J., Hort, N., Letzig, D. & Kainer, K. U., 01.08.2003, In: Materials Science Forum. 426-432, 1, p. 153-160 8 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
New methods for in vivo degradation testing of future stent materials
Bartosch, M., Peters, H., Koerner, A., Schmitt, B., Berger, F., Hort, N. & Witte, F., 01.02.2018, In: Materials and Corrosion. 69, 2, p. 156-166 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Novel Magnesium Based Materials: Are They Reliable Drone Construction Materials? A Mini Review
Höche, D., Weber, W. E., Gazenbiller, E., Gavras, S., Hort, N. & Dieringa, H., 23.04.2021, In: Frontiers in Materials. 8, 7 p., 575530.Research output: Journal contributions › Scientific review articles › Research
Nucleation kinetics of the γ-phase in a binary Mg-Al alloy
Lalpoor, M., Dzwonczyk, J. S., Hort, N. & Offerman, S. E., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S., Neelameggham, N. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 259-262 4 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Nucleation mechanism of Mg17Al12-precipitates in binary Mg-7 wt.% Al alloy
Lalpoor, M., Dzwonczyk, J. S., Hort, N. & Offerman, S. E., 25.04.2013, In: Journal of Alloys and Compounds. 557, p. 73-76 4 p.Research output: Journal contributions › Journal articles › Research › peer-review
Numerical determination of heat distribution and castability simulations of as cast Mg-Al alloys
Khan, S. S., Hort, N., Eiken, J., Steinbach, I. & Schmauder, S., 03.2009, In: Advanced Engineering Materials. 11, 3, p. 162-168 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Observations of Microstructure-Oriented Crack Growth in a Cast Mg-Al-Ba-Ca Alloy under Tension, Compression and Fatigue
Maier, P., Ginesta, D., Clausius, B. & Hort, N., 02.04.2022, In: Metals. 12, 4, 17 p., 613.Research output: Journal contributions › Journal articles › Research › peer-review
On the influence of settling of (ZrB2)P inoculants on Grain Refinement of Mg-alloys: Experiment and Theoretical Calculation
Günther, R., Hartig, C., Hort, N. & Bormann, R., 2009, Linking Science and Technology for Global Solution: Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 309-313 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Optimization of thermo-mechanical processing for forging of newly developed creep-resistant magnesium alloy ABAX633
Pitcheswara Rao, K., Dharmendra, C., Venkata Rama Krishna Prasad, Y., Hort, N. & Dieringa, H., 21.11.2017, In: Metals. 7, 11, 13 p., 513.Research output: Journal contributions › Journal articles › Research › peer-review
Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg-3Sn-1Ca alloy
Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 25.02.2009, In: Materials Science and Engineering A. 502, 1-2, p. 25-31 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Phase equilibria, thermodynamics and solidification microstructures of Mg-Sn-Ca alloys, Part 2: Prediction of phase formation in Mg-rich Mg-Sn-Ca cast alloys
Kozlov, A., Ohno, M., Leil, T. A., Hort, N., Kainer, K. U. & Schmid-Fetzer, R., 02.2008, In: Intermetallics. 16, 2, p. 316-321 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
Phase formation during solidification of Mg-Nd-Zn alloys: An in situ synchrotron radiation diffraction study
Tolnai, D., Subroto, T., Gavras, S., Buzolin, R., Stark, A., Schell, N. & Hort, N., 06.09.2018, In: Materials. 11, 9, 10 p., 1637.Research output: Journal contributions › Journal articles › Research › peer-review
Polycrystalline and amorphous MgZnCa thin films
Schlüter, K., Zamponi, C., Hort, N., Kainer, K. U. & Quandt, E., 10.2012, In: Corrosion Science. 63, p. 234-238 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Powder Metallurgically Manufactured Metal Matrix Composites
Hort, N. & Kainer, K. U., 06.06.2006, Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering. Kainer, K. U. (ed.). John Wiley & Sons Ltd., p. 243-276 34 p.Research output: Contributions to collected editions/works › Chapter › peer-review
Powder metallurgical synthesis of biodegradable mg-hydroxyapatite composites for biomedical applications
Stüpp, C. A., Mendis, C. L., Mohedano, M., Szakács, G., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, M. C. & Hort, N., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 165-171 7 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Powder metallurgical synthesis of biodegradable Mg-Hydroxyapatite composites for biomedical applications
Stüpp, C. A., Szakács, G., Mendis, C. L., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, M. C. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 425-429 5 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Precipitation hardening on mechanical and corrosion properties of extruded Mg10Gd modified with Nd and La
Maier, P., Bechly, M., Mendis, C. L. & Hort, N., 14.08.2018, In: Metals. 8, 8, 14 p., 640.Research output: Journal contributions › Journal articles › Research › peer-review
Precipitation processes in Mg-Y-Nd-Ag alloys suitable for biodegradable implants
Vlček, M., Lukáč, F., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kodetová, V., Szakács, G., Hort, N. & Kainer, K. U., 05.2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials: Conference Proceedings. Ostrava: TANGER Ltd., p. 1103-1108 6 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Predicting the interfacial heat transfer coefficient of cast Mg-Al alloys using Beck's inverse analysis
Bilal, M. U. & Hort, N., 12.06.2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 8 p., 012027.Research output: Journal contributions › Conference article in journal › Research › peer-review
Preparation and properties of high purity Mg-Y biomaterials
Peng, Q., Huang, Y., Zhou, L., Hort, N. & Kainer, K. U., 01.2010, In: Biomaterials. 31, 3, p. 398-403 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Production of Mg-Mg2Si Composites
Neuhaus, J., Wiese, B. & Hort, N., 01.01.2024, Magnesium Technology 2024. Leonard, A., Barela, S., Neelameggham, N. R., Miller, V. M. & Tolnai, D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 165-169 5 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Progress and challenge for magnesium alloys as biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N. & Blawert, C., 08.2008, In: Advanced Engineering Materials. 10, 8, p. B3-B14 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Properties and processing of magnesium-tin-calcium alloys
Hort, N., Huang, Y. D., Leil, T. A., Rao, K. P. & Kainer, K. U., 2011, In: Kovove Materialy. 49, 3, p. 163-177 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
Protecting molten magnesium and its alloys
Hort, N., Wiese, B., Dieringa, H. & Kainer, K. U., 06.2016, In: Metallurgia Italiana. 108, 6, p. 105-108 4 p.Research output: Journal contributions › Journal articles › Research › peer-review
Quantitative determination on hot tearing in Mg-Al binary alloys
Zhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 533-540 8 p. (Materials Science Forum; vol. 618 619).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Recent research and developments on wrought magnesium alloys
You, S., Huang, Y., Kainer, K. U. & Hort, N., 01.09.2017, In: Journal of Magnesium and Alloys. 5, 3, p. 239-253 15 p.Research output: Journal contributions › Scientific review articles › Research
Recycling of heat resistant magnesium alloys
Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2008, REWAS 2008: Global Symposium on Recycling, Waste Treatment and Clean Technology. Mishra, B., Ludwig, C. & Das, S. K. (eds.). John Wiley & Sons Inc., p. 821-828 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Recycling of magnesium drive train components
Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 01.2009, In: Science in China, Series E: Technological Sciences. 52, 1, p. 148-154 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Reprint of: Improved cytotoxicity testing of magnesium materials
Fischer, J., Pröfrock, D., Hort, N., Willumeit, R. & Feyerabend, F., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1773-1777 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Residual stresses near the hot sprues of as-cast Mg-Zn alloys investigated by STRESS-SPEC neutron diffractometer
Gan, W. M., Huang, Y. D., Wang, Z., Hort, N. & Hofmann, M., 2014, International Conference on Residual Stresses 9 (ICRS 9). Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Trans Tech Publications Ltd, p. 428-432 5 p. (Materials Science Forum; vol. 768-769).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Residual stresses of the as-cast Mg-xCa alloys with hot sprues by neutron diffraction
Song, J. F., Huang, Y. D., Kainer, K. U., Gan, W. M. & Hort, N., 01.08.2014, Residual Stresses IX. Francois, M., Montay, G., Panicaud, B., Retraint, D. & Rouhaud, E. (eds.). Trans Tech Publications Ltd, p. 592-597 6 p. (Advanced Materials Research; vol. 996).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Restoration mechanisms at moderate temperatures for As-Cast ZK40 magnesium alloys modified with individual Ca and Gd additions
Buzolin, R. H., Guimaraes, L. H. M., Díaz, J. A. Á., Silva, E. P. D., Tolnai, D., Mendis, C. L., Hort, N. & Pinto, H. C., 16.12.2020, In: Crystals. 10, 12, p. 1-22 22 p., 1140.Research output: Journal contributions › Journal articles › Research › peer-review
Review on Hot Working Behavior and Strength of Calcium-Containing Magnesium Alloys
Rao, K. P., Prasad, Y. V. R. K., Dharmendra, C., Suresh, K., Hort, N. & Dieringa, H., 09.2018, In: Advanced Engineering Materials. 20, 9, 19 p., 1701102.Research output: Journal contributions › Scientific review articles › Research
- Published
Revisiting the tolerance limit of Fe impurity in biodegradable magnesium
Zhang, Y., Huang, Y., Chen, X., Luthringer-Feyerabend, B., Xue, J., Zander, D., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 15.04.2022, In: Scripta Materialia. 212, 114509.Research output: Journal contributions › Journal articles › Research › peer-review
Role of Ca on the corrosion resistance of Mg–9Al and Mg–9Al–0.5Mn alloys
Mingo, B., Mohedano, M., Blawert, C., del Olmo, R., Hort, N. & Arrabal, R., 30.11.2019, In: Journal of Alloys and Compounds. 811, 151992.Research output: Journal contributions › Journal articles › Research › peer-review
Role of multi-microalloying by rare earth elements in ductilization of magnesium alloys
Huang, Y., Gan, W., Kainer, K. U. & Hort, N., 01.03.2014, In: Journal of Magnesium and Alloys. 2, 1, p. 1-7 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Role of SiC in grain refinement of aluminum-free Mg-Zn alloys
Gu, J., Huang, Y., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 177-181 5 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Simulation of stresses during casting of binary magnesium-aluminum alloys
Pokorny, M. G., Monroe, C. A., Beckermann, C., Zhen, Z. & Hort, N., 12.2010, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 41, 12, p. 3196-3207 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Simulation of stresses during casting of binary magnesium-aluminum alloys
Pokorny, M. G., Monroe, C. A., Beckermann, C., Zhen, Z. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 401-407 7 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Solid solution strengthening in Mg-Gd alloys
Xu, Y., Ren, Z., Huang, Y., Kainer, K. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 135-139 5 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires
Maier, P., Zimmermann, F., Rinne, M., Szakács, G., Hort, N. & Vogt, C., 01.02.2018, In: Materials and Corrosion. 69, 2, p. 178-190 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Solution heat treatment on mechanical properties and corrosion of extruded Mg5Gd compared to pure Mg
Maier, P., Bechly, M. & Hort, N., 2017, Materials Science and Technology Conference and Exhibition 2017. Association for Iron and Steel Technology (AISTECH), p. 76-83 8 p. (Materials Science and Technology Conference and Exhibition 2017, MS and T 2017; vol. 1).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Some studies on Mg alloy reinforced with ceramic discontinuous phases
Thakur, S. K., Dhindaw, B. K., Hort, N. & Kainer, K. U., 2003, In: Materials Science Forum. 419-422, II, p. 837-842 6 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
Some studies on the thermal-expansion behavior of C-Fiber, SiCp, and in-situ Mg2Si-reinforced AZ31 Mg alloy-based hybrid composites
Thakur, S. K., Dhindaw, B. K., Hort, N. & Kainer, K. U., 01.03.2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35, 13, p. 1167-1176 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Spike-forging of AS-cast TX32 magnesium alloy
Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 275-279 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Status of the development of creep resistant magnesium materials for automotive applications
Karl, U. K., Yuanding, H., Hajo, D. & Norbert, H., 2010, In: Materials Science Forum. 638-642, p. 73-80 8 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
Strengthening and ductilizing of magnesium alloying with heavy rare earth elements
Huang, Y., Xu, Y., You, S., Gan, W., Karl, K. U. & Hort, N., 07.08.2018, In: MATEC Web of Conferences. 188, 6 p., 03021.Research output: Journal contributions › Conference article in journal › Research › peer-review
Stress corrosion of the Mg-Zn-Zr alloy system using C-ring tests
Maier, P., Ostermeier, N., Wicke, J., You, S. & Hort, N., 2019, MS and T 2019 - Materials Science and Technology 2019. Materials Science and Technology (MS&T), p. 1142-1149 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Study of hot forging behavior of as-cast Mg-3Al-1Zn-2Ca alloy towards optimization of its hot workability
Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 05.2014, In: Materials and Design. 57, p. 697-704 8 p.Research output: Journal contributions › Journal articles › Research › peer-review
Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetry
Tolnai, D., Szakács, G., Requena, G., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 286-290 5 p. (Materials Science Forum; vol. 765).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Study on Mg–Si–Sr ternary alloys for biomedical applications
Van der Biest, O., Gil-Santos, A., Hort, N., Schmid-Fetzer, R. & Moelans, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 413-424 12 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Tensile and compressive creep behaviour of Al2O3 (Saffil®) short fiber reinforced magnesium alloy AE42
Dieringa, H., Huang, Y., Maier, P., Hort, N. & Kainer, K. U., 25.11.2005, In: Materials Science and Engineering A. 410-411, p. 85-88 4 p.Research output: Journal contributions › Journal articles › Research › peer-review
Texture evolution during hot deformation processing of Mg-3Sn-2Ca-0.4Al alloy
Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 295-300 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The effect of grain refinement on hot tearing in AZ91D magnesium alloy
Davis, T., Bichler, L., D’Elia, F. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 653-660 8 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The Effect of Solid Solute and Precipitate Phase on Young's Modulus of Binary Mg–RE Alloys
Xu, Y. L., Wang, L., Huang, M., Gensch, F., Kainer, K. U. & Hort, N., 10.2018, In: Advanced Engineering Materials. 20, 10, 9 p., 1800271.Research output: Journal contributions › Journal articles › Research › peer-review
The effect of Y addition on recrystallization and mechanical properties of Mg–6Zn–xY–0.5Ce–0.4Zr alloys
Liu, L., Pan, F., Chen, X., Huang, Y., Song, B., Yang, H. & Hort, N., 09.2018, In: Vacuum. 155, p. 445-455 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
The formation of Sr 6.33Mg 16.67Si 13 in magnesium alloy AM50 and its effect on mechanical properties
Fechner, D., Hort, N., Blawert, C., Dieringa, H., Störmer, M. & Kainer, K. U., 07.2012, In: Journal of Materials Science. 47, 14, p. 5461-5469 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
The influence of de-icing salts on corrosion of Mg-alloys
Anopuo, O., Hort, N., Huang, Y. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 439-444 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The influence of the casting process on the creep properties of different AZ-based magnesium alloys
Frank, H., Dieringa, H., Hort, N. & Kainer, K. U., 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. The Minerals, Metals & Materials Society, p. 669-676 8 p. (Modeling of Casting, Welding and Advanced Solidification Processes - XI; vol. 2).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The interaction of precipitation and deformation in a binary Mg-Ca alloy at elevated temperatures
Lalpoor, M., Miroux, A., Mendis, C. L., Hort, N. & Offerman, S. E., 15.07.2014, In: Materials Science and Engineering A. 609, p. 116-124 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
Thermal behavior of short fiber reinforced AlSi12CuMgNi piston alloys
Huang, Y. D., Hort, N. & Kainer, K. U., 01.02.2004, In: Composites Part A: Applied Science and Manufacturing. 35, 2, p. 249-263 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and in-situ Mg2Si reinforced hybrid composites
Thakur, S. K., Dieringa, H., Dhindaw, B. K., Hort, N. & Kainer, K. U., 08.2005, In: Transactions of the Indian Institute of Metals. 58, 4, p. 653-659 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and IN-SITU Mg2Si reinforced hybrid composites
Thakur, S. K., Dieringa, H., Dhindaw, B. K., Hort, N. & Kainer, K. U., 2004, In: International SAMPE Symposium and Exhibition (Proceedings). 49, p. 307-317 11 p.Research output: Journal contributions › Conference article in journal › Research › peer-review
Thermodynamic assessment and experimental study of Mg-Gd alloys
Hampl, M., Blawert, C., Silva Campos, M. R., Hort, N., Peng, Q., Kainer, K. U. & Schmid-Fetzer, R., 25.12.2013, In: Journal of Alloys and Compounds. 581, p. 166-177 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Thermodynamic description of reactions between Mg and CaO
Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, C. L., Tolnai, D., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 67-72 6 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The Role of Second Phases on the Creep Behavior of As-Cast and Hot-Extruded Mg-Ca-Zr Alloys
You, S., Huang, Y., Dieringa, H., Maawad, E., Gan, W., Kainer, K. U. & Hort, N., 15.07.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 7, p. 2227-2234 8 p.Research output: Journal contributions › Journal articles › Research › peer-review
The role of solutes for grain refinement by (SiC)P: Experiment and theoretical calculation
Günther, R., Hartig, C., Anopuo, O., Hort, N. & Bormann, R., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 95-99 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The Role of Zn Additions on the Microstructure and Mechanical Properties of Mg–Nd–Zn Alloys
Gavras, S., Subroto, T., Buzolin, R. H., Hort, N. & Tolnai, D., 01.07.2018, In: International Journal of Metalcasting. 12, 3, p. 428-433 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
The Role of Zn on the Elevated Temperature Compression Behavior of Mg5Nd: An In Situ Synchrotron Radiation Diffraction Study
Tolnai, D., Buzolin, R. H., D‘Elia, F., Subroto, T., Gavras, S., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 01.12.2016, In: JOM: Journal of The Minerals, Metals & Materials Society. 68, 12, p. 3051-3056 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
The video microscopy-linked electrochemical cell: An innovative method to improve electrochemical investigations of biodegradable metals
Zimmermann, T., Hort, N., Zhang, Y., Müller, W. D. & Schwitalla, A., 01.04.2021, In: Materials. 14, 7, 15 p., 1601.Research output: Journal contributions › Journal articles › Research › peer-review
Thixomolded AZ91D and MRI153M magnesium alloys and their enhanced corrosion resistance
Buzolin, R. H., Volovitch, P., Maltseva, A., Lamaka, S., Blawert, C., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 01.03.2020, In: Materials and Corrosion. 71, 3, p. 339-351 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Three-dimensional microstructural analysis of Mg-Al-Zn alloys by synchrotron-radiation-based microtomography
Witte, F., Fischer, J., Beckmann, F., Störmer, M. & Hort, N., 03.2008, In: Scripta Materialia. 58, 6, p. 453-456 4 p.Research output: Journal contributions › Journal articles › Research › peer-review
Threshold stress during tensile and compressive creep in AE42 magnesium alloy
Dieringa, H., Hort, N. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
To Fail or Not to Fail
Maier, P. & Hort, N., 01.01.2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 165-168 4 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Twinning assisted crack propagation of magnesium-rare earth casting and wrought alloys under bending
Maier, P., Mendis, C., Wolff, M., Müller, S. & Hort, N., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 311-317 7 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Twin-roll casting after intensive melt shearing and subsequent rolling of an am30 magnesium alloy with addition of cao and sic
Dieringa, H., Das, S., Eskin, D., Fan, Z. Y., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 35-40 6 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Ultrasonic stirring as a production process for nanoparticle reinforced magnesium alloys and the compression creep response of ZE10 reinforced with ceria nanoparticles
Dieringa, H., Hort, N. & Kainer, K. U., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Society for Composite Materials, ESCM, 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Understanding effects of microstructural inhomogeneity on creep response - New approaches to improve the creep resistance in magnesium alloys
Huang, Y., Dieringa, H., Kainer, K. U. & Hort, N., 01.06.2014, In: Journal of Magnesium and Alloys. 2, 2, p. 124-132 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
Unexpected Expansion Behavior of Mg-Al Alloys During Isothermal Ageing
Zhang, X., Huang, Y., Li, X., Gan, W., Kainer, K. U. & Hort, N., 15.08.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 8, p. 2906-2912 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Unexpected formation of hydrides in heavy rare earth containing magnesium alloys
Huang, Y., Yang, L., You, S., Gan, W., Kainer, K. U. & Hort, N., 01.09.2016, In: Journal of Magnesium and Alloys. 4, 3, p. 173-180 8 p.Research output: Journal contributions › Journal articles › Research › peer-review
Unraveling Recrystallization Mechanisms Governing Texture Development from Rare-Earth Element Additions to Magnesium
Imandoust, A., Barrett, C. D., Al-Samman, T., Tschopp, M. A., Essadiqi, E., Hort, N. & El Kadiri, H., 01.05.2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 5, p. 1809-1829 21 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Utilizing Synchrotron Radiation for the Characterization of Biodegradable Magnesium Alloys — From Alloy Development to the Application as Implant Material
Zeller-Plumhoff, B., Tolnai, D., Wolff, M., Greving, I., Hort, N. & Willumeit-Römer, R., 11.2021, In: Advanced Engineering Materials. 23, 11, 16 p., 2100197.Research output: Journal contributions › Scientific review articles › Research
Voltammetric studies of extruded pure magnesium in different electrolytes and its corrosion morphology
Maier, P., Gentzsch, L. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 429-437 9 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
XPS studies of magnesium surfaces after exposure to Dulbecco's modified eagle medium, Hank's buffered salt solution, and simulated body fluid
Tie, D., Feyerabend, F., Hort, N., Willumeit, R. & Hoeche, D., 12.2010, In: Advanced Engineering Materials. 12, 12, p. B699-B704 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
Zum Einfluss des Lösungsglühens und Aushärtens auf die Mikrostruktur von ZK40-Legierungen, modifiziert durch Zugaben von Ca, Gd, Nd und Y
Buzolin, R. H., Mendis, C. L., Tolnai, D., Kainer, K. U., Hort, N., Pereira Da Silva, E. & Cavalcanti Pinto, H., 05.2018, In: Praktische Metallographie/Practical Metallography. 55, 5, p. 268-287 20 p.Research output: Journal contributions › Journal articles › Research › peer-review