Professorship for materials mechanics
Organisational unit: Section
Organisation profile
The professorship "materials mechanics“ focuses on the development of suitable models for different classes of materials based on the physical deformation mechanisms as well as on the modeling and simulation of local production processes. The development of these material models is crucial for the application of new materials, since these models are able to describe the deformation behavior in industrial production processes which allows for their optimization. In particular, local engineering in the context of production processes is of high technological relevance in adjusting local properties. For example, laser material processing and friction stir welding are relevant processes which are investigated. A targeted heat input into the material can be used to control and adjust the properties near the surface. As a result, improved properties, particularly in terms of damage tolerance can be achieved. The complexity of the interaction between the process parameters and material properties leads to high experimental effort, with sophisticated experimental techniques required to determine the influence of the process on the component. Therefore, reliable models are required to reduce the experimental effort. The developed material and process models are used to identify optimal process parameters that produce the desired properties inside the material and structure. The main objective of the professorship is to develop realistic and efficient numerical models which are formulated on basis of the underlying physical mechanisms. The identification of these mechanisms requires interdisciplinary collaborations with scientists from materials science, mechanics and production.The cooperation between the University of Lüneburg and the Helmholtz-Zentrum Geesthacht provides an ideal opportunity to accomplish the goals of this shared professorship.
Topics
modeling of microstructures
process modeling ans simulation of laser shock peening
process modeling and simulation of laser welding
modeling of metallic glasses
modeling of residual stresses
modeling of nano materials
development of homogenization approaches for heterogeneous materials
- Article in conference proceedings › Research › Peer-reviewed
- Published
Comparison of Friction Extrusion Processing from Bulk and Chips of Aluminum-Copper Alloys
Rath, L., Suhuddin, U. F. H. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 471-480 10 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals
Lehmann, J., Keller, S., Esterl, F., Kashaev, N., Klusemann, B. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing AG, Vol. 3. p. 352-362 11 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Deformation and Anchoring of AA 2024-T3 rivets within thin printed circuit boards
Antunes Viallas Boas, M. C., Rodrigues, C. F., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 01.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 12 p. 21.4327. (ESAFORM 2021).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Digitalisierung aus der Perspektive Fachdidaktischer Forschung und Ingenieurwissenschaftlicher Lehrpraxis
Block, B-M. & Klusemann, B., 2020, 14. Ingenieurpädagogischen Regionaltagung 2019: Technische Bildung im Kontext von 'Digitalisierung' / 'Automatisierung' - Tendenzen, Möglichkeiten, Perspektiven. Petersen, M. & Kammasch, G. (eds.). Berlin: Ingenieur-Pädagogische Wissenschaftsgesellschaft, p. 147-155 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN
Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Evaluation of mechanical property predictions of refill Friction Stir Spot Welding joints via machine learning regression analyses on DoE data
Bock, F. E., Paulsen, T., Brkovic, N., Rieckmann, L., Kroeger, D., Wolgast, D., Zander, P., Suhuddin, U. F. H., dos Santos, J. F. & Klusemann, B., 02.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 11 p. 2589. (ESAFORM 2021 - 24th International Conference on Material Forming).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental Investigation of Efficiency and Deposit Process Temperature During Multi-Layer Friction Surfacing
Kallien, Z., Roos, A. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 187-193 7 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Fatigue crack propagation influenced by laser shock peening introduced residual stress fields in aluminium specimens
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.01.2020, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing: Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Niepokolczycki, A. & Komorowski, J. (eds.). Cham, Schweiz: Springer, p. 617-631 15 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Fatigue Life Extension of AA2024 Specimens and Integral Structures by Laser Shock Peening
Kashaev, N., Chupakhin, S., Ventzke, V., Horstmann, M., Riekehr, S., Barbini, A., dos Santos, J., Keller, S., Klusemann, B. & Huber, N., 25.05.2018, MATEC Web of Conferences: 12th International Fatigue Congress (FATIGUE 2018) . G, H. (ed.). EDP Sciences, Vol. 165. 6 p. 18001. (MATEC Web of Conferences; vol. 165).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties
Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024
Chan, C. Y. C., Suhuddin, U. F. H. R., Rath, L., Bachiega, F. L. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 422-428 7 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Investigation of temperature evolution and flash formation at AA5083 studs during friction surfacing
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 05.01.2021, THERMEC 2021 - International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications. Ionescu, M., Sommitsch, C., Poletti, C., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 660-665 6 p. (Materials Science Forum; vol. 1016 MSF).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens
Pöltl, D., Keller, S., Chupakhin, S., Sala, S. T., Kashaev, N. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 2293-2302 10 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Processability of Mg-Gd Powder via Friction Extrusion
Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, p. 431-441 11 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Process characteristics of constrained friction processing of AM50 magnesium alloy
de Castro, C. C., Shen, J., Dos Santos, J. F. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 3. p. 1739-1746 8 p. 188. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Process simulation of friction extrusion of aluminum alloys
Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Thermal analysis of laser additive manufacturing of aluminium alloys: Experiment and simulation
Bock, F. E., Frönd, M., Herrnring, J., Enz, J., Kashaev, N. & Klusemann, B., 02.05.2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018: ESAFORM 2018. Buffa, G., Fratini, L., Ingarao, G. & Di Lorenzo, R. (eds.). American Institute of Physics Inc., 6 p. 140004. (AIP Conference Proceedings; vol. 1960, no. 1).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published abstract in conference proceedings › Research › Peer-reviewed
- Published
Experimental and numerical study of laser shock peening process of AA2198-T3 and AA2198-T8
Klusemann, B., Keller, S., Huber, N. & Kashaev, N., 2016, Book of Abstracts of the 6th International Conference on Laser Peening and Related Phenomena (6TH ICLPRP). Polese, C. (ed.). University of the Witwatersrand, p. 13 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Global modelling of the ns-laser shock peening
Pozdnyakov, V., Keller, S., Klusemann, B., Kashaev, N. & Oberrath, J., 03.2019, DPG-Frühjahrstagung der Sektion Materie und Kosmos (SMuK) : mit den Fachverbänden (sektionszugehörig): Extraterrestrische Physik, Gravitation und Relativitätstheorie, Physik der Hadronenund Kerne, Theoretische und Mathematische Grundlagen der Physik sowie weiteren Fachverbänden: Geschichte der Physik, Kurzzeit- und angewandte Laserphysik, Plasmaphysik, Umweltphysik und den Arbeitskreisen bzw. der Arbeitsgruppe: Beschleunigerphysik, Chancengleichheit, Junge DPG, Philosophie der Physik. Bad Honnef: Deutsche Physikalische Gesellschaft, p. 151 1 p. K 6.1. (Verhandlung der Deutschen Physikalischen Gesellschaft, Reihe 6; vol. 54, no. 2).Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Influences of RVE topology, discretization and boundary conditions in practical multiscaling - a comparison
Schneider, K., Klusemann, B. & Bargmann, S., 2016, Book of Abstract for Joint Annual Meeting of GAMM and DMV: March 7-11, 2016; Braunschweig, Germany. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 175 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Modeling of microstructural pattern formation in crystal plasticity
Klusemann, B., 2016, Book of Abstract of the Joint Annual Meeting of GAMM and DMV. G. F. A. M. U. M. E. V. (ed.). Technische Universität Braunschweig, p. 621 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Published
Study of intrinsic and extrinsic size effects on shear bands in metallic glasses
Klusemann, B., Soyarslan, C. & Bargmann, S., 2016, Contributions to the Foundations of Multidisciplinary Research in Mechanics: Papers presented during the 24th International Congress of Theoretical and Applied Mechanics ICTAM2016, Montreal, 22-26, 2016. Floryan, J. M. (ed.). International Union for Theoretical and Applied Mechanics, Vol. 3. p. 2524-2525 2 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Journal articles › Research › Not peer-reviewed
- Published
Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing
Bock, F. E., Kallien, Z., Huber, N. & Klusemann, B., 01.01.2024, In: Computer Methods in Applied Mechanics and Engineering. 418, Part A, 26 p., 116453.Research output: Journal contributions › Journal articles › Research
- Published
Friction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint properties
Rodrigues, C. F., Blaga, L. & Klusemann, B., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 4639-4649 11 p.Research output: Journal contributions › Journal articles › Research
- Published
Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study
Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.Research output: Journal contributions › Journal articles › Research
- Published
Microstructural development of as-cast AM50 during Constrained Friction Processing: grain refinement and influence of process parameters
de Castro, C. C., Shen, J., dos Santos, J. F. & Klusemann, B., 01.09.2023, In: Journal of Materials Processing Technology. 318, 11 p., 118018.Research output: Journal contributions › Journal articles › Research
- Published
Modeling of microstructural pattern formation in crystal plasticity
Klusemann, B., 25.10.2016, In: Proceedings in applied mathematics and mechanics. 16, 1, p. 361-362 2 p.Research output: Journal contributions › Journal articles › Research
- Published
Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process
Jin, F., Fu, B., Shen, J., Li, J., Li, W., Santos, J. F. D. & Klusemann, B., 01.06.2023, In: Materials Characterization. 200, 112911.Research output: Journal contributions › Journal articles › Research
- Published
Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing
Escobar, J., Gwalani, B., Silverstein, J., Ajantiwalay, T., Roach, C., Bergmann, L., dos Santos, J. F., Maawad, E., Klusemann, B. & Devaraj, A., 01.08.2023, In: Materials Characterization. 202, 112999.Research output: Journal contributions › Journal articles › Research
- Published
Refill friction stir spot welding of thermoplastic composites: Case study on Carbon-fiber-reinforced polyphenylene sulfide
Schäfer, H., Blaga, L. A., Stöver, E. & Klusemann, B., 01.10.2023, In: Thin-Walled Structures. 191, 111037.Research output: Journal contributions › Journal articles › Research
- Published
Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy
Li, G., Chen, T., Fu, B., Shen, J., Bergmann, L., Zhou, L., Chen, K., Santos, J. F. D. & Klusemann, B., 01.08.2023, In: Journal of Materials Processing Technology. 317, 117984.Research output: Journal contributions › Journal articles › Research
- Published
Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing
Kallien, Z., Roos, A., Knothe-Horstmann, C. & Klusemann, B., 26.04.2023, In: Materials Science & Engineering A. 871, 11 p., 144872.Research output: Journal contributions › Journal articles › Research
- Journal articles › Research › Peer-reviewed
- Published
A multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloy
Wang, J., Fu, B., Shen, J., Bergmann, L., Lu, X., dos Santos, J. F. & Klusemann, B., 01.09.2022, In: Journal of Materials Processing Technology. 307, 117679.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing
Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy
Examilioto, T., Klusemann, B., Kashaev, N., Riekehr, S., Enz, J. & Alexopoulos, N., 01.01.2017, In: Procedia Structural Integrity. 5, p. 13-18 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of design of experiments for laser shock peening process optimization
Chupakhin, S., Klusemann, B., Huber, N. & Kashaev, N., 19.06.2019, In: The International Journal of Advanced Manufacturing Technology. 102, 5-8, p. 1567-1581 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures
Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, In: Additive Manufacturing Letters. 8, 8 p., 100184.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy
Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, In: Journal of Magnesium and Alloys. 12, 2, p. 516-529 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Application of stress intensity factor superposition in residual stress fields considering crack closure
Keller, S. & Klusemann, B., 15.02.2021, In: Engineering Fracture Mechanics. 243, 13 p., 107415.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Artificial neural network for correction of effects of plasticity in equibiaxial residual stress profiles measured by hole drilling
Chupakhin, S., Kashaev, N., Klusemann, B. & Huber, N., 01.04.2017, In: The Journal of Strain Analysis for Engineering Design. 52, 3, p. 137-151 15 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints
Wen, Q., Li, W., Patel, V., Bergmann, L., Klusemann, B. & dos Santos, J. F., 01.01.2021, In: Acta Metallurgica Sinica (English Letters). 34, 1, p. 125-134 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Automatic three-dimensional geometry and mesh generation of periodic representative volume elements for matrix-inclusion composites
Schneider, K., Klusemann, B. & Bargmann, S., 01.09.2016, In: Advances in Engineering Software. 99, p. 177-188 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy
Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, In: Journal of Materials Research and Technology. 29, p. 4895-4901 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems
Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 p., 102692.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum
Halak, R. M., Rath, L., Suhuddin, U. F. H. R., dos Santos, J. F. & Klusemann, B., 01.05.2022, In: International Journal of Material Forming. 15, 3, 14 p., 24.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel
Batistao, B. F., Bergmann, L., Gargarella, P., de Alcantara, N. G., dos Santos, J. F. & Klusemann, B., 01.11.2020, In: Journal of Materials Research and Technology. 9, 6, p. 15132-15142 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing
Kallien, Z. & Klusemann, B., 15.05.2022, In: Surface and Coatings Technology. 437, 11 p., 128350.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Combined experimental–numerical study on residual stresses induced by a single impact as elementary process of mechanical peening
Sandmann, P., Nielsen, M. A., Keller, S., Maawad, E., Staron, P. & Klusemann, B., 01.08.2020, In: Strain. 56, 4, 17 p., e12338.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences
Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, In: Materials Science & Engineering A. 859, 144227.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints
Su, Y., Li, W., Shen, J., Fu, B., dos Santos, J. F., Klusemann, B. & Vairis, A., 17.08.2021, In: Materials Science and Engineering A. 823, 141698.Research output: Journal contributions › Journal articles › Research › peer-review