Gaussian trajectories in motion control for camless engines

Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

Standard

Gaussian trajectories in motion control for camless engines. / Haus, Benedikt; Mercorelli, Paolo; Werner, Nils.
Proceedings of the 2017 21st International Conference on Process Control (PC). ed. / M. Fikar; M. Kvasnica. 1. ed. IEEE - Institute of Electrical and Electronics Engineers Inc., 2017. p. 76-80.

Research output: Contributions to collected editions/worksArticle in conference proceedingsResearchpeer-review

Harvard

Haus, B, Mercorelli, P & Werner, N 2017, Gaussian trajectories in motion control for camless engines. in M Fikar & M Kvasnica (eds), Proceedings of the 2017 21st International Conference on Process Control (PC). 1 edn, IEEE - Institute of Electrical and Electronics Engineers Inc., pp. 76-80, 21st International Conference on Process Control - PC 2017, Strbske Pleso, Slovakia, 06.06.17. https://doi.org/10.1109/PC.2017.7976192

APA

Haus, B., Mercorelli, P., & Werner, N. (2017). Gaussian trajectories in motion control for camless engines. In M. Fikar, & M. Kvasnica (Eds.), Proceedings of the 2017 21st International Conference on Process Control (PC) (1 ed., pp. 76-80). IEEE - Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PC.2017.7976192

Vancouver

Haus B, Mercorelli P, Werner N. Gaussian trajectories in motion control for camless engines. In Fikar M, Kvasnica M, editors, Proceedings of the 2017 21st International Conference on Process Control (PC). 1 ed. IEEE - Institute of Electrical and Electronics Engineers Inc. 2017. p. 76-80 doi: 10.1109/PC.2017.7976192

Bibtex

@inbook{276408be53e94ff6a69f152e4a2c1329,
title = "Gaussian trajectories in motion control for camless engines",
abstract = "In the last few years, variable engine valve control has attracted a lot of attention because of its ability to reduce pumping losses and increase torque performance over a wider speed and load range. Variable valve timing also allows control of internal exhaust gas recirculation, thus improving fuel economy and reducing NOx emissions. One of the most important issues in this context is to track suitable variable (optimized in terms of engine speed and load) motion profiles for the intake and exhaust valves. This can be achieved using dedicated actuators for the valves instead of a traditional camshaft. This contribution considers a new kind of actuator for this purpose and its control for motion tracking in the context of camless systems. However, this paper's main intention is to introduce a method of generating variable engine valve trajectories that are based on Gaussian curves and exemplarily provide the reader with information on how to exploit their favorable mathematical properties for control design purposes. As a demonstration of this kind of curve's variability, a delay-compensating phase-adaptive feedforward action is derived from a linear model description of the actuator. Simulations show the effectiveness of a simple heuristic delay-estimation algorithm in combination with the mentioned feedforward action.",
keywords = "Engine applications, servo hydraulic systems, trajectory generation, Engineering",
author = "Benedikt Haus and Paolo Mercorelli and Nils Werner",
year = "2017",
month = jul,
day = "11",
doi = "10.1109/PC.2017.7976192",
language = "English",
isbn = "978-1-5386-4012-8 ",
pages = "76--80",
editor = "M. Fikar and M. Kvasnica",
booktitle = "Proceedings of the 2017 21st International Conference on Process Control (PC)",
publisher = "IEEE - Institute of Electrical and Electronics Engineers Inc.",
address = "United States",
edition = "1",
note = "21st International Conference on Process Control - PC 2017, PC 2017 ; Conference date: 06-06-2017 Through 09-06-2017",
url = "https://www.uiam.sk/pc17/index.html%3Fq=node%252F1.html",

}

RIS

TY - CHAP

T1 - Gaussian trajectories in motion control for camless engines

AU - Haus, Benedikt

AU - Mercorelli, Paolo

AU - Werner, Nils

N1 - Conference code: 21

PY - 2017/7/11

Y1 - 2017/7/11

N2 - In the last few years, variable engine valve control has attracted a lot of attention because of its ability to reduce pumping losses and increase torque performance over a wider speed and load range. Variable valve timing also allows control of internal exhaust gas recirculation, thus improving fuel economy and reducing NOx emissions. One of the most important issues in this context is to track suitable variable (optimized in terms of engine speed and load) motion profiles for the intake and exhaust valves. This can be achieved using dedicated actuators for the valves instead of a traditional camshaft. This contribution considers a new kind of actuator for this purpose and its control for motion tracking in the context of camless systems. However, this paper's main intention is to introduce a method of generating variable engine valve trajectories that are based on Gaussian curves and exemplarily provide the reader with information on how to exploit their favorable mathematical properties for control design purposes. As a demonstration of this kind of curve's variability, a delay-compensating phase-adaptive feedforward action is derived from a linear model description of the actuator. Simulations show the effectiveness of a simple heuristic delay-estimation algorithm in combination with the mentioned feedforward action.

AB - In the last few years, variable engine valve control has attracted a lot of attention because of its ability to reduce pumping losses and increase torque performance over a wider speed and load range. Variable valve timing also allows control of internal exhaust gas recirculation, thus improving fuel economy and reducing NOx emissions. One of the most important issues in this context is to track suitable variable (optimized in terms of engine speed and load) motion profiles for the intake and exhaust valves. This can be achieved using dedicated actuators for the valves instead of a traditional camshaft. This contribution considers a new kind of actuator for this purpose and its control for motion tracking in the context of camless systems. However, this paper's main intention is to introduce a method of generating variable engine valve trajectories that are based on Gaussian curves and exemplarily provide the reader with information on how to exploit their favorable mathematical properties for control design purposes. As a demonstration of this kind of curve's variability, a delay-compensating phase-adaptive feedforward action is derived from a linear model description of the actuator. Simulations show the effectiveness of a simple heuristic delay-estimation algorithm in combination with the mentioned feedforward action.

KW - Engine applications

KW - servo hydraulic systems

KW - trajectory generation

KW - Engineering

UR - http://www.scopus.com/inward/record.url?scp=85027519053&partnerID=8YFLogxK

U2 - 10.1109/PC.2017.7976192

DO - 10.1109/PC.2017.7976192

M3 - Article in conference proceedings

AN - SCOPUS:85027519053

SN - 978-1-5386-4012-8

SP - 76

EP - 80

BT - Proceedings of the 2017 21st International Conference on Process Control (PC)

A2 - Fikar, M.

A2 - Kvasnica, M.

PB - IEEE - Institute of Electrical and Electronics Engineers Inc.

T2 - 21st International Conference on Process Control - PC 2017

Y2 - 6 June 2017 through 9 June 2017

ER -

DOI

Recently viewed

Publications

  1. Advanced extrusion processes
  2. The Role of Zn Additions on the Microstructure and Mechanical Properties of Mg–Nd–Zn Alloys
  3. Visions of Process—Swarm Intelligence and Swarm Robotics in Architectural Design and Construction
  4. Bulk and local textures of pure magnesium processed by rotary swaging
  5. ZooKeys, unlocking Earth's incredible biodiversity and building a sustainable bridge into the public domain: From "print-based" to "web-based" taxonomy, systematics, and natural history ZooKeys Editorial Opening Paper
  6. Grüne Parteien
  7. Trust in scientists, risk perception, conspiratorial beliefs, and unrealistic optimism
  8. A Method to Enhance the Accuracy of Time of Flight Measurement Systems
  9. Manual construction and mathematics- and computer-aided counting of stereoisomers. The example of oligoinositols
  10. Rational Design of Molecules by Life Cycle Engineering
  11. New Methods for the Analysis of Links between International Firm Activities and Firm Performance: A Practitioner’s Guide
  12. HPLC and chemometrics-assisted UV-spectroscopy methods for the simultaneous determination of ambroxol and doxycycline in capsule.
  13. Recontextualizing context
  14. Succession in respect of cession, unification and separation of States.
  15. Concept Maps in der Hochschullehre
  16. Microstructural approaches of engineering materials
  17. Life-protecting neoliberalism
  18. Comments on Hasenfeld and Gidron
  19. The Island of the Day After.
  20. Value co-creation through collective intelligence in the public sector
  21. The professional identity of gameworkers revisited
  22. Lifestyle-TV – Critical Attitudes towards „Banal” Programming
  23. Towards a socio-cognitive approach to knowledge transfer
  24. Introducing the MusicLab Copenhagen Dataset
  25. In situ investigation of microstructure evolution during solidification of Mg10CaxGd (x = 5, 10, 20) alloys
  26. [U]topische Körper in der Adoleszenz
  27. Analytical model to determine the strength of form-fit connection joined by die-less hydroforming
  28. One Fits Them All?
  29. Ion release from magnesium materials in physiological solutions under different oxygen tensions
  30. Computer-based Adaptive Speed Tests
  31. Lernen und Wiederlernen in chatbasiertem Computer-Supported Collaborative Learning
  32. Global flows of ecosystem services
  33. The economic value of soil carbon
  34. Contagious Agents
  35. Mapping relative risk for biodiversity from the application of pesticides, focusing on pollinators