Norbert Hort
Prof. Dr.
Contact
Prof. Dr. Norbert Hort
- Engineering
Research areas
- Article in conference proceedings › Research › Peer-reviewed
Microstructure and mechanical properties of mg-gd alloys as biodegradable implant materials
Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 253-262 10 p. (Minerals, Metals and Materials Series; vol. Part F12).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and properties of magnesium alloy Mg-1Zn-1Ca (Zx11)
Katsarou, L., Suresh, K., Rao, K. P., Hort, N., Blawert, C., Mendis, C. L. & Dieringa, H., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 419-423 5 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and thermal response of Mg-Sn alloys
Anopuo, O., Huang, Y., Blawert, C., Hort, N. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 529-534 6 p. (Magnesium Technology; vol. 2006).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure, corrosion and creep of as-cast magnesium alloys Mg-2Sn-2Ca and Mg-4Sn-2Ca
Abu Leil, T., Rao, K. P., Hort, N., Huang, Y., Blawert, C., Dieringa, H. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 257-262 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure investigation of Mg-10Gd-1La containing alloy subjected to fatigue deformation
Mendis, C. L., Maier, P., Müller, S., Kainer, K. U. & Hort, N., 2013, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Association for Iron and Steel Technology (AISTECH), p. 1542-1549 8 p. (Materials Science and Technology Conference and Exhibition 2013, MS and T 2013; vol. 3).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure, mechanical and corrosion properties of Mg-Gd-Zn alloys
Srinivasa, A., Huang, Y., Mendis, C. L., Dieringa, H., Blawert, C., Kainer, K. U. & Hort, N., 2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 28-32 5 p. (Materials Science Forum; vol. 765).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructures, Corrosion and Mechanical Properties of Mg–Si Alloys as Biodegradable Implant Materials
Wang, W., Gao, M., Huang, Y., Tan, L., Yang, K. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 151-157 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Modeling Bolt Load Retention of Ca modified AS41 using compliance-creep method
Anopuo, O., Huang, Y., Hort, N., Kainer, K. U. & Maier, P., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 278-281 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Nanomechanical Analysis and Fractography of Extruded Mg-Dy-Nd Based Alloy Influenced by Solution Heat Treatment
Maier, P., Richter, A., Clausius, B. & Hort, N., 2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 181-187 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Nucleation kinetics of the γ-phase in a binary Mg-Al alloy
Lalpoor, M., Dzwonczyk, J. S., Hort, N. & Offerman, S. E., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S., Neelameggham, N. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 259-262 4 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
On the influence of settling of (ZrB2)P inoculants on Grain Refinement of Mg-alloys: Experiment and Theoretical Calculation
Günther, R., Hartig, C., Hort, N. & Bormann, R., 2009, Linking Science and Technology for Global Solution: Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 309-313 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Powder metallurgical synthesis of biodegradable mg-hydroxyapatite composites for biomedical applications
Stüpp, C. A., Mendis, C. L., Mohedano, M., Szakács, G., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, M. C. & Hort, N., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 165-171 7 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Powder metallurgical synthesis of biodegradable Mg-Hydroxyapatite composites for biomedical applications
Stüpp, C. A., Szakács, G., Mendis, C. L., Gensch, F., Müller, S., Feyerabend, F., Hotza, D., Fredel, M. C. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 425-429 5 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Precipitation processes in Mg-Y-Nd-Ag alloys suitable for biodegradable implants
Vlček, M., Lukáč, F., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kodetová, V., Szakács, G., Hort, N. & Kainer, K. U., 05.2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials: Conference Proceedings. Ostrava: TANGER Ltd., p. 1103-1108 6 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Production of Mg-Mg2Si Composites
Neuhaus, J., Wiese, B. & Hort, N., 01.01.2024, Magnesium Technology 2024. Leonard, A., Barela, S., Neelameggham, N. R., Miller, V. M. & Tolnai, D. (eds.). Springer Science and Business Media Deutschland GmbH, p. 165-169 5 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Quantitative determination on hot tearing in Mg-Al binary alloys
Zhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 533-540 8 p. (Materials Science Forum; vol. 618 619).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Recycling of heat resistant magnesium alloys
Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2008, REWAS 2008: Global Symposium on Recycling, Waste Treatment and Clean Technology. Mishra, B., Ludwig, C. & Das, S. K. (eds.). John Wiley & Sons Inc., p. 821-828 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Residual stresses near the hot sprues of as-cast Mg-Zn alloys investigated by STRESS-SPEC neutron diffractometer
Gan, W. M., Huang, Y. D., Wang, Z., Hort, N. & Hofmann, M., 2014, International Conference on Residual Stresses 9 (ICRS 9). Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Trans Tech Publications Ltd, p. 428-432 5 p. (Materials Science Forum; vol. 768-769).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Residual stresses of the as-cast Mg-xCa alloys with hot sprues by neutron diffraction
Song, J. F., Huang, Y. D., Kainer, K. U., Gan, W. M. & Hort, N., 01.08.2014, Residual Stresses IX. Francois, M., Montay, G., Panicaud, B., Retraint, D. & Rouhaud, E. (eds.). Trans Tech Publications Ltd, p. 592-597 6 p. (Advanced Materials Research; vol. 996).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Role of SiC in grain refinement of aluminum-free Mg-Zn alloys
Gu, J., Huang, Y., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 177-181 5 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Simulation of stresses during casting of binary magnesium-aluminum alloys
Pokorny, M. G., Monroe, C. A., Beckermann, C., Zhen, Z. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 401-407 7 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Solid solution strengthening in Mg-Gd alloys
Xu, Y., Ren, Z., Huang, Y., Kainer, K. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 135-139 5 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Solution heat treatment on mechanical properties and corrosion of extruded Mg5Gd compared to pure Mg
Maier, P., Bechly, M. & Hort, N., 2017, Materials Science and Technology Conference and Exhibition 2017. Association for Iron and Steel Technology (AISTECH), p. 76-83 8 p. (Materials Science and Technology Conference and Exhibition 2017, MS and T 2017; vol. 1).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Spike-forging of AS-cast TX32 magnesium alloy
Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 275-279 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Stress corrosion of the Mg-Zn-Zr alloy system using C-ring tests
Maier, P., Ostermeier, N., Wicke, J., You, S. & Hort, N., 2019, MS and T 2019 - Materials Science and Technology 2019. Materials Science and Technology (MS&T), p. 1142-1149 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetry
Tolnai, D., Szakács, G., Requena, G., Stark, A., Schell, N., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 286-290 5 p. (Materials Science Forum; vol. 765).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Study on Mg–Si–Sr ternary alloys for biomedical applications
Van der Biest, O., Gil-Santos, A., Hort, N., Schmid-Fetzer, R. & Moelans, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 413-424 12 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Texture evolution during hot deformation processing of Mg-3Sn-2Ca-0.4Al alloy
Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 295-300 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The effect of grain refinement on hot tearing in AZ91D magnesium alloy
Davis, T., Bichler, L., D’Elia, F. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 653-660 8 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The influence of de-icing salts on corrosion of Mg-alloys
Anopuo, O., Hort, N., Huang, Y. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 439-444 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The influence of the casting process on the creep properties of different AZ-based magnesium alloys
Frank, H., Dieringa, H., Hort, N. & Kainer, K. U., 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. The Minerals, Metals & Materials Society, p. 669-676 8 p. (Modeling of Casting, Welding and Advanced Solidification Processes - XI; vol. 2).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Thermodynamic description of reactions between Mg and CaO
Schmid-Fetzer, R., Kozlov, A., Wiese, B., Mendis, C. L., Tolnai, D., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 67-72 6 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
The role of solutes for grain refinement by (SiC)P: Experiment and theoretical calculation
Günther, R., Hartig, C., Anopuo, O., Hort, N. & Bormann, R., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 95-99 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Threshold stress during tensile and compressive creep in AE42 magnesium alloy
Dieringa, H., Hort, N. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
To Fail or Not to Fail
Maier, P. & Hort, N., 01.01.2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 165-168 4 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Twinning assisted crack propagation of magnesium-rare earth casting and wrought alloys under bending
Maier, P., Mendis, C., Wolff, M., Müller, S. & Hort, N., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 311-317 7 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Twin-roll casting after intensive melt shearing and subsequent rolling of an am30 magnesium alloy with addition of cao and sic
Dieringa, H., Das, S., Eskin, D., Fan, Z. Y., Katsarou, L., Horstmann, M., Kurz, G., Mendis, C., Hort, N. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 35-40 6 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Ultrasonic stirring as a production process for nanoparticle reinforced magnesium alloys and the compression creep response of ZE10 reinforced with ceria nanoparticles
Dieringa, H., Hort, N. & Kainer, K. U., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Society for Composite Materials, ESCM, 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Voltammetric studies of extruded pure magnesium in different electrolytes and its corrosion morphology
Maier, P., Gentzsch, L. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 429-437 9 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published abstract in conference proceedings › Research › Peer-reviewed
An in vitro test for corrosion and cytocompatibility of two magnesium alloys
Feyerabend, F., Hort, N., Witte, F., Kainer, K. U. & Willumeit, R., 2008, 8th World Biomaterials Congress 2008: Proceedings of a meeting held 28 May - 1 June 2008, Amsterdam, The Netherlands. . Curran Associates, p. 636 1 p. (8th World Biomaterials Congress 2008; vol. 2).Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
Biodegradable Magnesium Implants - How Do They Corrode in-vivo?
Witte, F., Hort, N. & Feyerabend, F., 26.04.2011, Magnesium Technology 2011. Sillenkens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). John Wiley & Sons Ltd., p. 17 1 p.Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review
- Journal articles › Research › Not peer-reviewed
- Published
Compressive creep behavior and microstructural evolution of sand-cast and peak-aged Mg–12Gd–0.4Zr alloy at 250 °C
Shi, H., Huang, Y., Yang, L., Liu, C., Dieringa, H., Lu, C., Xiao, L., Willumeit-Römer, R. & Hort, N., 24.08.2023, In: Materials Science & Engineering A. 882, 145422.Research output: Journal contributions › Journal articles › Research
- Published
Degradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preforms
Casas-Luna, M., Montufar, E. B., Hort, N., Díaz-de-la-Torre, S., Méndez-García, J. C., Vištejnová, L., Brínek, A., Daňhel, A., Dvořak, K., Kaiser, J. & Čelko, L., 01.12.2022, In: Journal of Magnesium and Alloys. 10, 12, p. 3641-3656 16 p.Research output: Journal contributions › Journal articles › Research
- Published
Degraded creep resistance induced by static precipitation strengthening in high-pressure die casting Mg-Al-Sm alloy
Yang, Q., Lv, S., Deng, B., Hort, N., Huang, Y., Sun, W. & Qiu, X., 2024, In: Journal of Materials Science and Technology. 178, p. 48-58 11 p.Research output: Journal contributions › Journal articles › Research
- Published
Designing Mg alloys with high strength and ductility by reducing the strength difference between the basal and non-basal slips
Zhou, S., Liu, T., Tang, A., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R. & Pan, F., 01.01.2023, In: Materials and Design. 225, 14 p., 111476.Research output: Journal contributions › Journal articles › Research
- Journal articles › Research › Peer-reviewed
Abnormal extrusion texture and reversed yield asymmetry in a Mg–Y-Sm-Zn-Zr alloy
Lyu, S., Zheng, R., Xiao, W., Huang, Y., Gavras, S., Hort, N., Li, G. & Ma, C., 08.07.2019, In: Materials Science and Engineering A. 760, p. 426-430 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Achieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatment
Wang, K., Dou, X., Wang, J., Huang, Y., Gavras, S., Hort, N., Liu, S., Hu, H., Wang, J. & Pan, F., 14.07.2020, In: Materials Science and Engineering A. 790, 139635.Research output: Journal contributions › Journal articles › Research › peer-review
Analysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi composites
Huang, Y. D., Hort, N., Dieringa, H. & Kainer, K. U., 01.01.2005, In: Composites Science and Technology. 65, 1, p. 137-147 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
An Investigation on Hot Tearing of Mg-4.5Zn-(0.5Zr) Alloys with Y Additions
Wang, Z., Song, J., Huang, Y., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.05.2015, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 46, 5, p. 2108-2118 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
An in vivo study on the metabolism and osteogenic activity of bioabsorbable Mg-1Sr alloy
Tie, D., Guan, R., Liu, H., Cipriano, A., Liu, Y., Wang, Q., Huang, Y. & Hort, N., 01.01.2016, In: Acta Biomaterialia. 29, p. 455-467 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
As cast microstructures on the mechanical and corrosion behaviour of ZK40 modified with Gd and Nd additions
Buzolin, R. H., Mohedano, M., Mendis, C. L., Mingo, B., Tolnai, D., Blawert, C., Kainer, K. U., Pinto, H. & Hort, N., 13.01.2017, In: Materials Science and Engineering A. 682, p. 238-247 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
A study on the hot deformation behavior of cast Mg-4Sn-2Ca (TX42) alloy
Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 02.2014, In: JOM: Journal of The Minerals, Metals & Materials Society. 66, 2, p. 322-328 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Automotive applications of magnesium and its alloys
Blawert, C., Hort, N. & Kainer, K. U., 08.2004, In: Transactions of the Indian Institute of Metals. 57, 4, p. 397-408 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Biodegradable magnesium-hydroxyapatite metal matrix composites
Witte, F., Feyerabend, F., Maier, P., Fischer, J., Störmer, M., Blawert, C., Dietzel, W. & Hort, N., 05.2007, In: Biomaterials. 28, 13, p. 2163-2174 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Biodegradable Materials for Medical Applications II
Drelich, J. W., Sikora-Jasinska, M., Mostaed, E., Liu, H., Maier, P., Seitz, J. M. & Hort, N., 01.05.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 5, p. 1830-1832 3 p.Research output: Journal contributions › Journal articles › Research › peer-review
Blood triggered corrosion of magnesium alloys
Geis-Gerstorfer, J., Schille, C., Schweizer, E., Rupp, F., Scheideler, L., Reichel, H. P., Hort, N., Nolte, A. & Wendel, H. P., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1761-1766 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
Bolt load retention and creep response of AS41 alloyed with 0.15% Ca
Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 08.2010, In: SAE International Journal of Materials and Manufacturing. 3, 1, p. 202-210 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
Bulk and local textures of pure magnesium processed by rotary swaging
Gan, W. M., Huang, Y. D., Wang, R., Zhong, Z. Y., Hort, N., Kainer, K. U., Schell, N., Brokmeier, H. G. & Schreyer, A., 01.12.2013, In: Journal of Magnesium and Alloys. 1, 4, p. 341-345 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Calculation of Schmid factor in Mg alloys: Influence of stress state
Xia, D., Chen, X., Huang, G., Jiang, B., Tang, A., Yang, H., Gavras, S., Huang, Y., Hort, N. & Pan, F., 10.2019, In: Scripta Materialia. 171, p. 31-35 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Characterization of an extruded Mg-Dy-Nd alloy during stress corrosion with C-ring tests
Maier, P., Clausius, B., Wicke, J. & Hort, N., 05.2020, In: Metals. 10, 5, 16 p., 584.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Characterization of the deformation state of magnesium by electrical resistance
Meyer, S., Wiese, B., Hort, N. & Willumeit-Römer, R., 01.07.2022, In: Scripta Materialia. 215, 4 p., 114712.Research output: Journal contributions › Journal articles › Research › peer-review
Chemical surface alteration of biodegradable magnesium exposed to corrosion media
Willumeit, R., Fischer, J., Feyerabend, F., Hort, N., Bismayer, U., Heidrich, S. & Mihailova, B., 06.2011, In: Acta Biomaterialia. 7, 6, p. 2704-2715 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Comparative study of microstructure and texture of cast and homogenized TX32 magnesium alloy after hot deformation
Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 01.01.2015, In: Metals and Materials International. 21, 1, p. 134-146 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Comparison of different in vitro tests for biocompatibility screening of Mg alloys
Scheideler, L., Füger, C., Schille, C., Rupp, F., Wendel, H. P., Hort, N., Reichel, H. P. & Geis-Gerstorfer, J., 11.2013, In: Acta Biomaterialia. 9, 10, p. 8740-8745 6 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Comparison on Hot Tearing Behavior of Binary Mg–Al, Mg–Y, Mg–Gd, Mg–Zn, and Mg–Ca Alloys
Song, J., Zhao, H., Liao, J., Jiang, B., Zhang, A., Huang, Y., Kainer, K. U., Hort, N. & Pan, F., 08.2022, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 53, 8, p. 2986-3001 16 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Compressive deformation of as-extruded LPSO-containing Mg alloys at different temperatures
Zhao, D., Zhao, C., Chen, X., Huang, Y., Hort, N., Gavras, S. & Pan, F., 01.01.2022, In: Journal of Materials Research and Technology. 16, p. 944-959 16 p.Research output: Journal contributions › Journal articles › Research › peer-review
Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions
Rao, K. P., Prasad, Y. V. R. K., Dharmendra, C., Hort, N. & Kainer, K. U., 25.08.2011, In: Materials Science and Engineering A. 528, 22-23, p. 6964-6970 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Compressive strength and hot deformation mechanisms in as-cast Mg-4Al-2Ba-2Ca (ABaX422) alloy
Rao, K. P., Ip, H. Y., Suresh, K., Prasad, Y. V. R. K., Wu, C. M. L., Hort, N. & Kainer, K. U., 01.12.2013, In: Philosophical Magazine. 93, 35, p. 4364-4377 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
Connected process design for hot working of a creep-resistant Mg–4Al–2Ba–2Ca alloy (ABaX422)
Rao, K. P., Chalasani, D., Suresh, K., Prasad, Y. V. R. K., Dieringa, H. & Hort, N., 18.06.2018, In: Metals. 8, 6, 14 p., 463.Research output: Journal contributions › Journal articles › Research › peer-review
Corrosion behavior of Mg-Gd-Zn based alloys in aqueous NaCl solution
Srinivasan, A., Blawert, C., Huang, Y., Mendis, C. L., Kainer, K. U. & Hort, N., 01.09.2014, In: Journal of Magnesium and Alloys. 2, 3, p. 245-256 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting
Qiao, Z., Shi, Z., Hort, N., Zainal Abidin, N. I. & Atrens, A., 08.2012, In: Corrosion Science. 61, p. 185-207 23 p.Research output: Journal contributions › Journal articles › Research › peer-review
Corrosion behaviour of as-cast ZK40 with CaO and Y additions
BUZOLIN, R. H., MOHEDANO, M., MENDIS, C. L., MINGO, B., TOLNAI, D., BLAWERT, C., KAINER, K. U., PINTO, H. & HORT, N., 03.2018, In: Transactions of Nonferrous Metals Society of China (English Edition). 28, 3, p. 427-439 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Corrosion behaviour of electropolished magnesium materials
Kloiber, J., Schultheiß, U., Sotelo, L., Sarau, G., Christiansen, S., Gavras, S., Hort, N. & Hornberger, H., 01.03.2024, In: Materials Today Communications. 38, 14 p., 107983.Research output: Journal contributions › Journal articles › Research › peer-review
Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluation
Schille, C., Braun, M., Wendel, H. P., Scheideler, L., Hort, N., Reichel, H. P., Schweizer, E. & Geis-Gerstorfer, J., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1797-1801 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Corrosion of Mg-9Al alloy with minor alloying elements (Mn, Nd, Ca, Y and Sn)
Mingo, B., Arrabal, R., Mohedano, M., Mendis, C. L., del Olmo, R., Matykina, E., Hort, N., Merino, M. C. & Pardo, A., 15.09.2017, In: Materials and Design. 130, p. 48-58 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Crack propagation in as-extruded and heat-treated mg-dy-nd-zn-zr alloy explained by the effect of lpso structures and their micro-and nanohardness
Maier, P., Clausius, B., Richter, A., Bittner, B., Hort, N. & Menze, R., 01.07.2021, In: Materials. 14, 13, 22 p., 3686.Research output: Journal contributions › Journal articles › Research › peer-review
Creep behavior of AE42 based hybrid composites
Arunachaleswaran, A., Pereira, I. M., Dieringa, H., Huang, Y., Hort, N., Dhindaw, B. K. & Kainer, K. U., 15.07.2007, In: Materials Science and Engineering A. 460-461, p. 268-276 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
Creep behavior of Mg-10Gd-xZn (x=2 and 6wt%) alloys
Srinivasan, A., Dieringa, H., Mendis, C. L., Huang, Y., Rajesh Kumar, R., Kainer, K. U. & Hort, N., 01.01.2016, In: Materials Science and Engineering A. 649, p. 158-167 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Current development of creep-resistant magnesium cast alloys: A review
Mo, N., Tan, Q., Bermingham, M., Huang, Y., Dieringa, H., Hort, N. & Zhang, M. X., 05.10.2018, In: Materials and Design. 155, p. 422-442 21 p.Research output: Journal contributions › Journal articles › Research › peer-review
Cytotoxicity of the ga-containing coatings on biodegradable magnesium alloys
Nguyen, A., Kunert, M., Hort, N., Schrader, C., Weisser, J. & Schmidt, J., 01.03.2015, In: Surface Innovations. 3, 1, p. 10-19 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Deformation Mechanisms and Formability Window for As-Cast Mg-6Al-2Ca-1Sn-0.3Sr Alloy (MRI 230D)
Suresh, K., Pitcheswara Rao, K., Chalasani, D., Yellapregada Venkata Rama Krishna, P., Hort, N. & Dieringa, H., 01.03.2018, In: Journal of Materials Engineering and Performance. 27, 3, p. 1440-1449 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R. & Feyerabend, F., 10.2008, In: Current Opinion in Solid State and Materials Science. 12, 5-6, p. 63-72 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Developing a die casting magnesium alloy with excellent mechanical performance by controlling intermetallic phase
Meng, F., Lv, S., Yang, Q., Qin, P., Zhang, J., Guan, K., Huang, Y., Hort, N., Li, B., Liu, X. & Meng, J., 30.07.2019, In: Journal of Alloys and Compounds. 795, p. 436-445 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Development of a magnesium secondary alloy system for mixed magnesium post-consumer scrap
Fechner, D., Blawert, C., Hort, N., Dieringa, H. & Kainer, K. U., 01.08.2013, In: Materials Science and Engineering A. 576, p. 222-230 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
Development of high performance single-phase solid solution magnesium alloy at low temperature
Peng, Q., Huang, Y., Kainer, K. U. & Hort, N., 03.2012, In: Advanced Engineering Materials. 14, 3, p. 178-184 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
- Published
Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn
Zhou, S., Tang, A., Liu, T., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R. & Pan, F., 25.06.2023, In: Journal of Alloys and Compounds. 947, 169669.Research output: Journal contributions › Journal articles › Research › peer-review
Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates
Yu, J., Song, B., Xia, D., Zeng, X., Huang, Y., Hort, N., Mao, P. & Liu, Z., 01.09.2020, In: Journal of Magnesium and Alloys. 8, 3, p. 849-859 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of aluminum on microstructural evolution during hot deformation of TX32 magnesium alloy
Dharmendra, C., Rao, K. P., Zhao, F., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 09.2014, In: Journal of Materials Science. 49, 17, p. 5885-5898 14 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature
Xia, D., Zhang, J., Chen, X., Huang, G., Jiang, B., Tang, A., Gavras, S., Huang, Y., Hort, N. & Pan, F., 03.07.2020, In: Materials Science and Engineering A. 789, 139599.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of calcium addition on the hot working behavior of as-cast AZ31 magnesium alloy
Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 20.12.2013, In: Materials Science and Engineering A. 588, p. 272-279 8 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of erbium modification on the microstructure, mechanical and corrosion characteristics of binary Mg-Al alloys
Seetharaman, S., Blawert, C., Ng, B. M., Wong, W. L. E., Goh, C. S., Hort, N. & Gupta, M., 05.11.2015, In: Journal of Alloys and Compounds. 648, p. 759-770 12 p., 34680.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of extrusion and rotary swaging on the microstructural evolution and properties of Mg-5Li-5.3Al-0.7Si alloy
Chen, H., Zhang, M., Kong, F., Li, B., Cui, X., Huang, Y., Hort, N., Willumeit-Römer, R., Xie, W. & Wei, G., 03.10.2023, In: Materials Science & Engineering A. 885, 145627.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of fetal calf serum on the corrosion behaviour of magnesium alloys
Hornberger, H., Witte, F., Hort, N. & Mueller, W. D., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1746-1755 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of microstructural inhomogeneity on creep response of Mg-Sn alloys
Huang, Y., Hort, N., Leil, T. A., Kainer, K. U. & Liu, Y., 15.08.2007, In: Key Engineering Materials. 345-346, 1, p. 561-564 4 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of Nd Additions on the Mechanical Properties of Mg Binary Alloys
Xu, Y., Gavras, S., Gensch, F., Kainer, K. U. & Hort, N., 01.01.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 1, p. 517-525 9 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of silicon content on hot working, processing maps, and microstructural evolution of cast TX32-0.4Al magnesium alloy
Dharmendra, C., Rao, K. P., Zhao, F., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 12.06.2014, In: Materials Science and Engineering A. 606, p. 11-23 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloy
Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 02.2010, In: International Journal of Materials Research. 101, 2, p. 300-306 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of TiBor on the grain refinement and hot tearing susceptibility of AZ91D magnesium alloy
Davis, T. A., Bichler, L., D'Elia, F. & Hort, N., 30.08.2018, In: Journal of Alloys and Compounds. 759, p. 70-79 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of yttrium addition on lattice parameter, Young's modulus and vacancy of magnesium
Peng, Q., Meng, J., Li, Y., Huang, Y. & Hort, N., 25.02.2011, In: Materials Science and Engineering A. 528, 4-5, p. 2106-2109 4 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of Zn addition on hot tearing behaviour of Mg-0.5Ca-xZn alloys
Song, J., Wang, Z., Huang, Y., Srinivasan, A., Beckmann, F., Kainer, K. U. & Hort, N., 15.12.2015, In: Materials and Design. 87, p. 157-170 14 p.Research output: Journal contributions › Journal articles › Research › peer-review