1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Norbert Hort
  7. //
  8. Publications
  9. //

Norbert Hort

Prof. Dr.

Contact

Prof. Dr. Norbert Hort

Links

Advanced search options
Advanced search options

Reset

to
251 - 300 out of 400Page size: 50
  1. 2013

  2. Microstructural approaches of engineering materials: Influences of Dy content and heat treatments on the formation of hydrides in Mg-Dy alloys

    Huang, Y., Yang, L., Wang, Z., Kainer, K. U. & Hort, N., 2013, Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013. University of Patras, p. 971-980 10 p. (Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  3. Microstructure investigation of Mg-10Gd-1La containing alloy subjected to fatigue deformation

    Mendis, C. L., Maier, P., Müller, S., Kainer, K. U. & Hort, N., 2013, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. Association for Iron and Steel Technology (AISTECH), p. 1542-1549 8 p. (Materials Science and Technology Conference and Exhibition 2013, MS and T 2013; vol. 3).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  4. Microstructure, mechanical and corrosion properties of Mg-Gd-Zn alloys

    Srinivasa, A., Huang, Y., Mendis, C. L., Dieringa, H., Blawert, C., Kainer, K. U. & Hort, N., 2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 28-32 5 p. (Materials Science Forum; vol. 765).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  5. Nucleation kinetics of the γ-phase in a binary Mg-Al alloy

    Lalpoor, M., Dzwonczyk, J. S., Hort, N. & Offerman, S. E., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S., Neelameggham, N. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 259-262 4 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  6. 2012

  7. Hot tearing susceptibility of magnesium-gadolinium binary alloys

    Srinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K. U. & Hort, N., 12.2012, In: Transactions of the Indian Institute of Metals. 65, 6, p. 701-706 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  8. Influence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloy

    Mert, F., Blawert, C., Kainer, K. U. & Hort, N., 12.2012, In: Corrosion Science. 65, p. 145-151 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  9. Hot working mechanisms and texture development in Mg-3Sn-2Ca-0.4Al alloy

    Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 15.10.2012, In: Materials Chemistry and Physics. 136, 2-3, p. 1081-1091 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  10. Polycrystalline and amorphous MgZnCa thin films

    Schlüter, K., Zamponi, C., Hort, N., Kainer, K. U. & Quandt, E., 10.2012, In: Corrosion Science. 63, p. 234-238 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  11. High ductile as-cast Mg-RE based alloys at room temperature

    Peng, Q., Huang, Y., Kainer, K. U. & Hort, N., 15.09.2012, In: Materials Letters. 83, p. 209-212 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  12. Hot deformation mechanisms in AZ31 Magnesium Alloy Extruded at different temperatures: Impact of Texture

    Rao, K. P., Prasad, Y. V. R. K., Dzwonczyk, J., Hort, N. & Kainer, K. U., 01.09.2012, In: Metals. 2, 3, p. 292-312 21 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  13. Metallurgical characterization of hot tearing curves recorded during solidification of magnesium alloys

    Huang, Y. D., Wang, Z., Srinivasan, A., Kainer, K. U. & Hort, N., 01.09.2012, In: Acta Physica Polonica A. 122, 3, p. 497-500 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  14. Influence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg-Dy alloys

    Yang, L., Huang, Y., Feyerabend, F., Willumeit, R., Kainer, K. U. & Hort, N., 09.2012, In: Journal of the Mechanical Behavior of Biomedical Materials. 13, p. 36-44 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  15. Hot deformation behavior of Mg-2Sn-2Ca alloy in as-cast condition and after homogenization

    Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Hort, N. & Kainer, K. U., 30.08.2012, In: Materials Science and Engineering A. 552, p. 444-450 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  16. Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting

    Qiao, Z., Shi, Z., Hort, N., Zainal Abidin, N. I. & Atrens, A., 08.2012, In: Corrosion Science. 61, p. 185-207 23 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  17. Effects of corrosion environment and proteins on magnesium corrosion

    Yang, L., Hort, N., Willumeit, R. & Feyerabend, F., 08.2012, In: Corrosion Engineering Science and Technology. 47, 5, p. 335-339 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  18. The formation of Sr 6.33Mg 16.67Si 13 in magnesium alloy AM50 and its effect on mechanical properties

    Fechner, D., Hort, N., Blawert, C., Dieringa, H., Störmer, M. & Kainer, K. U., 07.2012, In: Journal of Materials Science. 47, 14, p. 5461-5469 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  19. Development of high performance single-phase solid solution magnesium alloy at low temperature

    Peng, Q., Huang, Y., Kainer, K. U. & Hort, N., 03.2012, In: Advanced Engineering Materials. 14, 3, p. 178-184 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  20. Identification of unexpected hydrides in Mg-20 wt% Dy alloy by high-brilliance synchrotron radiation

    Gan, W., Huang, Y., Yang, L., Kainer, K. U., Jiang, M., Brokmeier, H. G. & Hort, N., 02.2012, In: Journal of Applied Crystallography. 45, 1, p. 17-21 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  21. Ion release from magnesium materials in physiological solutions under different oxygen tensions

    Feyerabend, F., Drücker, H., Laipple, D., Vogt, C., Stekker, M., Hort, N. & Willumeit, R., 01.2012, In: Journal of Materials Science: Materials in Medicine. 23, 1, p. 9-24 16 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  22. Deformation microstructures and textures of cast Mg-3Sn-2Ca alloy under uniaxial hot compression

    Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Mechanical Engineering and Materials: ICMEM 2012. Jin, W. (ed.). Scientific.Net , p. 322-325 4 p. (Applied Mechanics and Materials; vol. 152-154).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  23. Mechanical and corrosion properties of as-cast and extruded MG10GD alloy for biomedical application

    Maier, P., Müller, S., Dieringa, H. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S., Sillekens, W. & Neelameggham, N. (eds.). The Minerals, Metals & Materials Society, p. 253-259 7 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  24. Microstructure and creep properties of MEZ magnesium alloy processed by thixocasting

    Morales Garza, E. D., Dieringa, H., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). Cham: Springer Schweiz, p. 385-389 5 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  25. Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce

    Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 149-154 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  26. Texture evolution during hot deformation processing of Mg-3Sn-2Ca-0.4Al alloy

    Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 295-300 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  27. Ultrasonic stirring as a production process for nanoparticle reinforced magnesium alloys and the compression creep response of ZE10 reinforced with ceria nanoparticles

    Dieringa, H., Hort, N. & Kainer, K. U., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. European Society for Composite Materials, ESCM, 8 p.

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  28. 2011

  29. Blood triggered corrosion of magnesium alloys

    Geis-Gerstorfer, J., Schille, C., Schweizer, E., Rupp, F., Scheideler, L., Reichel, H. P., Hort, N., Nolte, A. & Wendel, H. P., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1761-1766 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  30. Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluation

    Schille, C., Braun, M., Wendel, H. P., Scheideler, L., Hort, N., Reichel, H. P., Schweizer, E. & Geis-Gerstorfer, J., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1797-1801 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  31. Effect of fetal calf serum on the corrosion behaviour of magnesium alloys

    Hornberger, H., Witte, F., Hort, N. & Mueller, W. D., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1746-1755 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  32. Mechanical and corrosion properties of binary Mg-Dy alloys for medical applications

    Yang, L., Huang, Y., Peng, Q., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1827-1834 8 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  33. Reprint of: Improved cytotoxicity testing of magnesium materials

    Fischer, J., Pröfrock, D., Hort, N., Willumeit, R. & Feyerabend, F., 15.12.2011, In: Materials Science and Engineering: B. 176, 20, p. 1773-1777 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  34. Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions

    Rao, K. P., Prasad, Y. V. R. K., Dharmendra, C., Hort, N. & Kainer, K. U., 25.08.2011, In: Materials Science and Engineering A. 528, 22-23, p. 6964-6970 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  35. Influence of composition on hot tearing in binary mg-zn alloys

    Zhou, L., Huang, Y. D., Mao, P. L., Kainer, K. U., Liu, Z. & Hort, N., 08.2011, In: International Journal of Cast Metals Research. 24, 3-4, p. 170-176 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  36. Improved cytotoxicity testing of magnesium materials

    Fischer, J., Pröfrock, D., Hort, N., Willumeit, R. & Feyerabend, F., 25.06.2011, In: Materials Science and Engineering: B. 176, 11, p. 830-834 5 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  37. Chemical surface alteration of biodegradable magnesium exposed to corrosion media

    Willumeit, R., Fischer, J., Feyerabend, F., Hort, N., Bismayer, U., Heidrich, S. & Mihailova, B., 06.2011, In: Acta Biomaterialia. 7, 6, p. 2704-2715 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  38. Corrosion behavior of As-Cast binary Mg-Dy alloys

    Yang, L., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 417-421 5 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  39. In situ studies of light metals with synchrotron radiation and neutrons

    Staron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M., Hort, N., Eckerlebe, H., Kainer, K. U., Müller, M. & Schreyer, A., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 192-197 6 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  40. Magnesium permanent mold Castings optimization

    Elsayed, F. R., Hort, N., Salgado-Ordorica, M. A. & Kainer, K., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 65-68 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  41. Modeling Bolt Load Retention of Ca modified AS41 using compliance-creep method

    Anopuo, O., Huang, Y., Hort, N., Kainer, K. U. & Maier, P., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 278-281 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  42. Biodegradable Magnesium Implants - How Do They Corrode in-vivo?

    Witte, F., Hort, N. & Feyerabend, F., 26.04.2011, Magnesium Technology 2011. Sillenkens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). John Wiley & Sons Ltd., p. 17 1 p.

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

  43. Magnesium: An essential nutrient for a good biomaterial

    Manuel, M. V. & Hort, N., 04.2011, In: JOM: Journal of The Minerals, Metals & Materials Society. 63, 4, p. 99-99 1 p.

    Research output: Journal contributions › Comments / Debate / Reports › Research

  44. Mechanism of grain refinement of Mg-Al alloys by SiC inoculation

    Huang, Y., Kainer, K. U. & Hort, N., 04.2011, In: Scripta Materialia. 64, 8, p. 793-796 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  45. Magnesium (Mg) corrosion: A challenging concept for degradable implants

    Witte, F., Hort, N., Feyerabend, F. & Vogt, C., 03.2011, Corrosion of Magnesium Alloys. Song, G.-L. (ed.). Elsevier Inc., p. 403-425 23 p.

    Research output: Contributions to collected editions/works › Chapter › peer-review

  46. Macrostructure evolution in directionally solidified Mg-RE alloys

    Salgado-Ordorica, M. A., Punessen, W., Yi, S., Bohlen, J., Kainer, K. U. & Hort, N., 28.02.2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 113-118 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  47. Effect of yttrium addition on lattice parameter, Young's modulus and vacancy of magnesium

    Peng, Q., Meng, J., Li, Y., Huang, Y. & Hort, N., 25.02.2011, In: Materials Science and Engineering A. 528, 4-5, p. 2106-2109 4 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  48. Castability of some magnesium alloys in a novel castability die

    Easton, M. A., Gibson, M. A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T. B. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 61-64 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  49. Compression creep at 240°C of extruded magnesium alloys containing gadolinium

    Dieringa, H., Hort, N., Müller, S. & Kainer, K. U., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 270-273 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  50. Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions

    Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Dharmendra, C., Hort, N. & Kainer, K. U., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 169-174 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  51. Cyclic deformation of newly developed magnesium cast alloys in corrosive environment

    Maier, P., Anopuo, O., Malchau, F., Wienck, G. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 495-498 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  52. Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91

    Zander, D., Heilig, M., Hort, N., Klaus, G., B̈hrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 381-384 4 p. (Materials Science Forum; vol. 690).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  53. Investigations on hot tearing of Mg-Zn-(Al) alloys

    Zhou, L., Huang, Y., Mao, P., Kainer, K. U., Liu, Z. & Hort, N., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Nealameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 125-130 6 p. (Magnesium Technology).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

Previous 12 3 4 5 6 7 8 Next

Recently viewed