1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Norbert Hort
  7. //
  8. Publications
  9. //

Norbert Hort

Prof. Dr.

Contact

Prof. Dr. Norbert Hort

Links

Advanced search options
Advanced search options

Reset

    to
    301 - 397 out of 397Page size: 100
    1. 2010

    2. XPS studies of magnesium surfaces after exposure to Dulbecco's modified eagle medium, Hank's buffered salt solution, and simulated body fluid

      Tie, D., Feyerabend, F., Hort, N., Willumeit, R. & Hoeche, D., 12.2010, In: Advanced Engineering Materials. 12, 12, p. B699-B704 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    3. Bolt load retention and creep response of AS41 alloyed with 0.15% Ca

      Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 08.2010, In: SAE International Journal of Materials and Manufacturing. 3, 1, p. 202-210 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    4. Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines

      Feyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Drücker, H., Vogt, C. & Hort, N., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1834-1842 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    5. Interference of magnesium corrosion with tetrazolium-based cytotoxicity assays

      Fischer, J., Prosenc, M. H., Wolff, M., Hort, N., Willumeit, R. & Feyerabend, F., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1813-1823 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    6. Magnesium alloys as implant materials-Principles of property design for Mg-RE alloys

      Hort, N., Huang, Y., Fechner, D., Störmer, M., Blawert, C., Witte, F., Vogt, C., Drücker, H., Willumeit, R., Kainer, K. U. & Feyerabend, F., 05.2010, In: Acta Biomaterialia. 6, 5, p. 1714-1725 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    7. Effect of thermal and mechanical treatments on the hot working response of Mg-3Sn-1Ca alloy

      Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 02.2010, In: International Journal of Materials Research. 101, 2, p. 300-306 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    8. Preparation and properties of high purity Mg-Y biomaterials

      Peng, Q., Huang, Y., Zhou, L., Hort, N. & Kainer, K. U., 01.2010, In: Biomaterials. 31, 3, p. 398-403 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    9. Aluminium-rich coring structures in Mg-Al alloys with carbon inoculation

      Huang, Y., Zheng, X., Okechukwu, A., Kim, G. S., Kainer, K. U. & Hort, N., 2010, PRICM7. Nie, J.-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 675-678 4 p. (Materials Science Forum; vol. 654-656).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    10. Approaching bolt load retention behaviour of AS41 through compliance and creep deformation

      Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 215-220 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    11. Development of recyclable Mg-based alloys: Az91d and Azc1231 phase information derived from heating/cooling curve analysis

      Gesing, A. J., Reade, N. D., Sokolowski, J. H., Blawert, C., Fechner, D. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 97-105 9 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    12. Effect of minor additions of Al and Si on the mechanical properties of cast Mg-3Sn-2Ca alloys in low temperature range

      Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 2010, PRICM7. Nie, J.-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 635-638 4 p. (Materials Science Forum; vol. 654-656).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    13. Grain refinement of Mg-Al alloys by carbon inoculation

      Huang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K. U. & Kim, G. S., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 419-424 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    14. High temperature deformation mechanisms and processing map for hot working of cast-homogenized Mg-3Sn-2Ca alloy

      Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2010, THERMEC 2009. Chandra, T., Wanderka, N., Reimers, W. & Ionescu, M. (eds.). Trans Tech Publications Ltd, p. 3616-3621 6 p. (Materials Science Forum; vol. 638-642).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    15. Influence of cerium on stress corrosion cracking in AZ91D

      Heilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 305-309 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    16. Investigations on microstructure and properties of Mg-Sn-Ca alloys with 3% Al additions

      Elsayed, F. R., Leil, T. A., El-Aziz, A. A., Kainer, K. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    17. Microstructure and corrosion of AZ91 with small amounts of cerium

      Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Grbbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 187-191 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    18. Simulation of stresses during casting of binary magnesium-aluminum alloys

      Pokorny, M. G., Monroe, C. A., Beckermann, C., Zhen, Z. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 401-407 7 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    19. Status of the development of creep resistant magnesium materials for automotive applications

      Karl, U. K., Yuanding, H., Hajo, D. & Norbert, H., 2010, In: Materials Science Forum. 638-642, p. 73-80 8 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    20. 2009

    21. Magnesium recycling: State-of-the-Art developments, part II

      Fechner, D., Hort, N., Blawert, C., Dietzel, W. & Kainer, K. U., 09.2009, In: Light Metal Age. 67, 5, p. 34-36 3 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    22. Hot tearing behaviour of binary Mg-1Al alloy using a contraction force measuring method

      Zhen, Z. S., Hort, N., Huang, Y. D., Utke, O., Petri, N. & Kainer, K. U., 08.2009, In: International Journal of Cast Metals Research. 22, 1-4, p. 331-334 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    23. Magnesium recycling: State-of-the-Art developments, part I

      Fechner, D., Hort, N., Blawert, C., Dietzel, W. & Kainer, K. U., 07.2009, In: Light Metal Age. 67, 4, p. 42-46 5 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    24. Investigation of minimum creep rates and stress exponents calculated from tensile and compressive creep data of magnesium alloy AE42

      Dieringa, H., Hort, N. & Kainer, K. U., 15.06.2009, In: Materials Science and Engineering A. 510-511, C, p. 382-386 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    25. Mechanical properties and corrosion performance of AZ-Mg alloy modified with Ca and Sr

      Anopuo, O., Huang, Y., Dieringa, H., Hort, N., Kainer, K. U. & Khan, A. K., 04.2009, In: SAE International Journal of Materials and Manufacturing. 1, 1, p. 103-110 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    26. Numerical determination of heat distribution and castability simulations of as cast Mg-Al alloys

      Khan, S. S., Hort, N., Eiken, J., Steinbach, I. & Schmauder, S., 03.2009, In: Advanced Engineering Materials. 11, 3, p. 162-168 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    27. Optimum parameters and rate-controlling mechanisms for hot working of extruded Mg-3Sn-1Ca alloy

      Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 25.02.2009, In: Materials Science and Engineering A. 502, 1-2, p. 25-31 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    28. Microstructure and corrosion behavior of Mg-Sn-Ca alloys after extrusion

      ABU LEIL, T., HORT, N., DIETZEL, W., BLAWERT, C., HUANG, Y., KAINER, K. U. & RAO, K. P., 02.2009, In: Transactions of Nonferrous Metals Society of China (English Edition). 19, 1, p. 40-44 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    29. Recycling of magnesium drive train components

      Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 01.2009, In: Science in China, Series E: Technological Sciences. 52, 1, p. 148-154 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    30. Elevated temperature and varied load response of AS41 at bolted joint

      Anopuo, O., Shen, G., Xu, S., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Dargusch, M. S. & Keay, S. M. (eds.). Scientific.Net , p. 509-514 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    31. Influence of strontium, silicon and calcium additions on the properties of the AM50 alloy

      Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 459-462 4 p. (Materials Science Forum; vol. 618 619).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    32. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

      Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 105-110 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    33. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

      Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Ulrich Kainer, K., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 105-110 6 p. (TMS Annual Meeting).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    34. Magnesium recycling system prepared by permanent mould- and high pressure die casting

      Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    35. Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processing

      Pinheiro, G., Santos, J. D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 191-196 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    36. On the influence of settling of (ZrB2)P inoculants on Grain Refinement of Mg-alloys: Experiment and Theoretical Calculation

      Günther, R., Hartig, C., Hort, N. & Bormann, R., 2009, Linking Science and Technology for Global Solution: Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 309-313 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    37. Quantitative determination on hot tearing in Mg-Al binary alloys

      Zhen, Z., Hort, N., Huang, Y., Petri, N., Utke, O. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 533-540 8 p. (Materials Science Forum; vol. 618 619).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    38. 2008

    39. Effects of welding conditions on microstructural transformations and mechanical properties in AE42-HP friction welded joints

      Pinheiro, G. A., Pankiewicz, C. G., Hort, N., Dos Santos, J. F. & Kainer, K. U., 01.11.2008, In: Welding in the World. 52, 11-12, p. 10-17 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    40. Hot working parameters and mechanisms in as-cast Mg-3Sn-1Ca alloy

      Prasad, Y. V. R. K., Rao, K. P., Hort, N. & Kainer, K. U., 15.10.2008, In: Materials Letters. 62, 26, p. 4207-4209 3 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    41. Degradable biomaterials based on magnesium corrosion

      Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R. & Feyerabend, F., 10.2008, In: Current Opinion in Solid State and Materials Science. 12, 5-6, p. 63-72 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    42. Evolution of microstructure and hardness of AE42 alloy after heat treatments

      Huang, Y. D., Dieringa, H., Hort, N., Maier, P., Kainer, K. U. & Liu, Y. L., 08.09.2008, In: Journal of Alloys and Compounds. 463, 1-2, p. 238-245 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    43. Progress and challenge for magnesium alloys as biomaterials

      Zeng, R., Dietzel, W., Witte, F., Hort, N. & Blawert, C., 08.2008, In: Advanced Engineering Materials. 10, 8, p. B3-B14 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    44. Hot workability characteristics of cast and homogenized Mg-3Sn-1Ca alloy

      Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 26.05.2008, In: Journal of Materials Processing Technology. 201, 1-3, p. 359-363 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    45. Effects of segregation of primary alloying elements on the creep response in magnesium alloys

      Huang, Y., Dieringa, H., Hort, N., Leil, T. A., Kainer, K. U. & Liu, Y., 05.2008, In: Scripta Materialia. 58, 10, p. 894-897 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    46. Three-dimensional microstructural analysis of Mg-Al-Zn alloys by synchrotron-radiation-based microtomography

      Witte, F., Fischer, J., Beckmann, F., Störmer, M. & Hort, N., 03.2008, In: Scripta Materialia. 58, 6, p. 453-456 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    47. Phase equilibria, thermodynamics and solidification microstructures of Mg-Sn-Ca alloys, Part 2: Prediction of phase formation in Mg-rich Mg-Sn-Ca cast alloys

      Kozlov, A., Ohno, M., Leil, T. A., Hort, N., Kainer, K. U. & Schmid-Fetzer, R., 02.2008, In: Intermetallics. 16, 2, p. 316-321 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    48. An in vitro test for corrosion and cytocompatibility of two magnesium alloys

      Feyerabend, F., Hort, N., Witte, F., Kainer, K. U. & Willumeit, R., 2008, 8th World Biomaterials Congress 2008: Proceedings of a meeting held 28 May - 1 June 2008, Amsterdam, The Netherlands. . Curran Associates, p. 636 1 p. (8th World Biomaterials Congress 2008; vol. 2).

      Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research › peer-review

    49. Castability of magnesium alloys

      Khan, S. S., Hort, N., Steinbach, I. & Schmauder, S., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 197-202 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    50. Creep and hot working behavior of a new magnesium alloy Mg-3Sn-2Ca

      Hort, N., Rao, K. P., Abu Leu, T., Dieringa, H., Prasad, V. Y. R. K. & Kainer, K. U., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 401-406 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    51. Influence of processing route on the properties of magnesium alloys

      Frank, H., Hort, N., Dieringa, H. & Kainer, K. U., 2008, Semi-Solid Processing of Alloys and Composites X - Selected: peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2008. Trans Tech Publications Ltd, p. 43-48 6 p. (Solid State Phenomena; vol. 141-143).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    52. Recycling of heat resistant magnesium alloys

      Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2008, REWAS 2008: Global Symposium on Recycling, Waste Treatment and Clean Technology. Mishra, B., Ludwig, C. & Das, S. K. (eds.). John Wiley & Sons Inc., p. 821-828 8 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    53. The role of solutes for grain refinement by (SiC)P: Experiment and theoretical calculation

      Günther, R., Hartig, C., Anopuo, O., Hort, N. & Bormann, R., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 95-99 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    54. 2007

    55. Effect of microstructural inhomogeneity on creep response of Mg-Sn alloys

      Huang, Y., Hort, N., Leil, T. A., Kainer, K. U. & Liu, Y., 15.08.2007, In: Key Engineering Materials. 345-346, 1, p. 561-564 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    56. Creep behavior of AE42 based hybrid composites

      Arunachaleswaran, A., Pereira, I. M., Dieringa, H., Huang, Y., Hort, N., Dhindaw, B. K. & Kainer, K. U., 15.07.2007, In: Materials Science and Engineering A. 460-461, p. 268-276 9 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    57. High temperature deformation behaviour of a new magnesium alloy

      Rao, K. P., Prasad, Y. V. R. K., Hort, N., Huang, Y. & Kainer, K. U., 15.06.2007, In: Key Engineering Materials. 340-341, 1, p. 89-94 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    58. Effect of heat treatment on the microstructure and creep behavior of Mg-Sn-Ca alloys

      Abu Leil, T., Huang, Y., Dieringa, H., Hort, N., Kainer, K. U., Buršík, J., Jirásková, Y. & Rao, K. P., 01.05.2007, Progress in Light Metals, Aerospace Materials and Superconductors. Lu, Y., Zhang, P., Jiang, C. & Han, Y. (eds.). PART 1 ed. Trans Tech Publications Ltd, p. 69-72 4 p. (Materials Science Forum; vol. 546-549, no. PART 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    59. Biodegradable magnesium-hydroxyapatite metal matrix composites

      Witte, F., Feyerabend, F., Maier, P., Fischer, J., Störmer, M., Blawert, C., Dietzel, W. & Hort, N., 05.2007, In: Biomaterials. 28, 13, p. 2163-2174 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    60. Microstructure characterisation and creep properties of AE42 based hybrid composites prepared by squeeze casting process

      Arunachaleswaran, A., Dhindaw, B. K., Dieringa, H., Hort, N. & Kainer, K. U., 04.2007, In: Transactions of the Indian Institute of Metals. 60, 2-3, p. 87-91 5 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    61. Development of a magnesium recycling alloy based on AM50

      Fechner, D., Maier, P., Hort, N. & Kainer, K. U., 15.03.2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 ed. Trans Tech Publications Ltd, p. 108-113 6 p. (Materials Science Forum; vol. 539-543, no. PART 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    62. 3D characterization of beta-phases in AZ91D by synchrotron-radiation based microtomography

      Witte, F., Fischer, J., Störmer, M. & Hort, N., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 389-394 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    63. Advances in manufacturing processes for magnesium alloys

      Dieringa, H., Bohlen, J., Hort, N., Letzig, D. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 3-8 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    64. Development of a magnesium recycling alloy based on the AM alloy system

      Fechner, D., Hort, N., Blawert, C. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleyuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 287-292 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    65. Microstructural investigations of MG-AL alloys containing small amount of SiC nucleants

      Huang, Y., Hort, N., Anopuo, O., Kainer, K. U., Vidrich, G., Schiffl, A. & Liu, Y., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 421-426 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    66. Microstructure, corrosion and creep of as-cast magnesium alloys Mg-2Sn-2Ca and Mg-4Sn-2Ca

      Abu Leil, T., Rao, K. P., Hort, N., Huang, Y., Blawert, C., Dieringa, H. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 257-262 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    67. Microtomography on biomaterials using the harwi-2 beamline at desy

      Herzen, J., Beckmann, F., Müller, B., Witte, F., Donath, T., Leukers, B., Irsen, S. H., Störmer, M., Hort, N., Schrott-Fischer, A., Glueckert, R. & Schreyer, A., 2007, In: European Cells and Materials. 13, SUPPL.3, p. 38 1 p.

      Research output: Journal contributions › Conference abstract in journal › Research › peer-review

    68. The influence of de-icing salts on corrosion of Mg-alloys

      Anopuo, O., Hort, N., Huang, Y. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 439-444 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    69. Threshold stress during tensile and compressive creep in AE42 magnesium alloy

      Dieringa, H., Hort, N. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    70. 2006

    71. Enhancement of workability in AZ31 alloy - Processing maps: Part I, cast material

      Dzwonczyk, J., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 01.10.2006, In: Advanced Engineering Materials. 8, 10, p. 966-973 8 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    72. Investigations on thermal fatigue of aluminum- and magnesium-alloy based composites

      Huang, Y. D., Hort, N., Dieringa, H., Maier, P. & Kainer, K. U., 10.2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1399-1405 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    73. Powder Metallurgically Manufactured Metal Matrix Composites

      Hort, N. & Kainer, K. U., 06.06.2006, Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering. Kainer, K. U. (ed.). John Wiley & Sons Ltd., p. 243-276 34 p.

      Research output: Contributions to collected editions/works › Chapter › peer-review

    74. Microstructural investigations of the Mg-Sn-xCa system

      Hort, N., Huang, Y., Leil, T. A., Maier, P. & Kainer, K. U., 01.05.2006, In: Advanced Engineering Materials. 8, 5, p. 359-364 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    75. Intermetallics in magnesium alloys

      Hort, N., Huong, Y. & Kainer, K. U., 01.04.2006, In: Advanced Engineering Materials. 8, 4, p. 235-240 6 p.

      Research output: Journal contributions › Scientific review articles › Research

    76. Corrosion behavior and microstructure of a broad range of Mg-Sn-X alloys

      Abu Leil, T., Rao, K. P., Hort, N. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 281-286 6 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    77. Effects of interfacial reactions during solidification on mechanical properties in short fiber reinforced AlSi12CuMgNi composites

      Huang, Y., Hort, N., Dieringa, H. & Kainer, K., 2006, Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium. Gupta, N. & Hunt, W. (eds.). John Wiley & Sons Inc., p. 165-172 8 p. (TMS Annual Meeting; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    78. Hot rolling and deep drawing of AM50 sheet

      Göken, J., Hort, N., Blawert, C., Steinhoff, K. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 205-210 6 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    79. Machining of hybrid reinforced Mg-MMCs using abrasive water jetting

      Aust, E., Elsäßer, M., Hort, N. & Limberg, W., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 345-349 5 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    80. Microstructure and thermal response of Mg-Sn alloys

      Anopuo, O., Huang, Y., Blawert, C., Hort, N. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 529-534 6 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    81. The influence of the casting process on the creep properties of different AZ-based magnesium alloys

      Frank, H., Dieringa, H., Hort, N. & Kainer, K. U., 2006, Modeling of Casting, Welding and Advanced Solidification Processes - XI. The Minerals, Metals & Materials Society, p. 669-676 8 p. (Modeling of Casting, Welding and Advanced Solidification Processes - XI; vol. 2).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    82. 2005

    83. Tensile and compressive creep behaviour of Al2O3 (Saffil®) short fiber reinforced magnesium alloy AE42

      Dieringa, H., Huang, Y., Maier, P., Hort, N. & Kainer, K. U., 25.11.2005, In: Materials Science and Engineering A. 410-411, p. 85-88 4 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    84. A critical review of the Stress Corrosion Cracking (SCC) of magnesium alloys

      Winzer, N., Atrens, A., Song, G., Ghali, E., Dietzel, W., Kainer, K. U., Hort, N. & Blawert, C., 01.08.2005, In: Advanced Engineering Materials. 7, 8, p. 659-693 35 p.

      Research output: Journal contributions › Scientific review articles › Research

    85. Microstructural investigations of interfaces in short fiber reinforced AlSi12CuMgNi composites

      Huang, Y. D., Hort, N., Dieringa, H., Kainer, K. U. & Liu, Y. L., 01.08.2005, In: Acta Materialia. 53, 14, p. 3913-3923 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    86. Hot tearing of magnesium alloys

      Hort, N., Dieringa, H. & Kainer, K. U., 08.2005, In: Transactions of the Indian Institute of Metals. 58, 4, p. 703-708 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    87. Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and in-situ Mg2Si reinforced hybrid composites

      Thakur, S. K., Dieringa, H., Dhindaw, B. K., Hort, N. & Kainer, K. U., 08.2005, In: Transactions of the Indian Institute of Metals. 58, 4, p. 653-659 7 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    88. Investigations in the magnesium-tin system

      Bowles, A. L., Dieringa, H., Blawert, C., Hort, N. & Kainer, K. U., 15.07.2005, Magnesium - Science, Technology and Applications, Mg - Proceedings of the International Conference on Magnesium - Science, Technology and Applications. Ke, W., Han, E. H., Han, Y. F., Kainer, K. U. & Luo, A. A. (eds.). Trans Tech Publications Ltd, p. 135-138 4 p. (Materials Science Forum; vol. 488-489).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    89. Microstructural development in tension and compression creep of magnesium alloy AE42

      Dieringa, H., Bowles, A., Hort, N. & Kainer, K. U., 15.04.2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. Pokluda, J. (ed.). Trans Tech Publications Ltd, p. 271-274 4 p. (Materials Science Forum; vol. 482).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    90. Analysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi composites

      Huang, Y. D., Hort, N., Dieringa, H. & Kainer, K. U., 01.01.2005, In: Composites Science and Technology. 65, 1, p. 137-147 11 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    91. Corrosion properties of secondary AZ91 alloys

      Blawert, C., Morales, E., Dietzel, W., Hort, N., Kainer, K. U., Scharf, C., Ditze, A. & Endres, F., 2005, In: Magnesium Technology. 2005, p. 447-450 4 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    92. 2004

    93. Micro-strain induced by thermal cycling in short fiber reinforced AlSi12CuMgNi piston alloy and AE42 magnesium alloy

      Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 01.11.2004, In: Advanced Engineering Materials. 6, 11, p. 883-888 6 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    94. Automotive applications of magnesium and its alloys

      Blawert, C., Hort, N. & Kainer, K. U., 08.2004, In: Transactions of the Indian Institute of Metals. 57, 4, p. 397-408 12 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    95. Some studies on the thermal-expansion behavior of C-Fiber, SiCp, and in-situ Mg2Si-reinforced AZ31 Mg alloy-based hybrid composites

      Thakur, S. K., Dhindaw, B. K., Hort, N. & Kainer, K. U., 01.03.2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35, 13, p. 1167-1176 10 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    96. Thermal behavior of short fiber reinforced AlSi12CuMgNi piston alloys

      Huang, Y. D., Hort, N. & Kainer, K. U., 01.02.2004, In: Composites Part A: Applied Science and Manufacturing. 35, 2, p. 249-263 15 p.

      Research output: Journal contributions › Journal articles › Research › peer-review

    97. Microstructural investigations of the Mg-Sn and Mg-Sn-Al alloy systems

      Bewies, A. L., Blawert, C., Hort, N. & Kainer, K. U., 2004, Magnesium Technology 2004. Luo, A. A. (ed.). The Minerals, Metals & Materials Society, p. 307-310 4 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    98. Thermal cycling and creep studies of AM50+Nd magnesium alloy based carbon fiber, SiC particulate and IN-SITU Mg2Si reinforced hybrid composites

      Thakur, S. K., Dieringa, H., Dhindaw, B. K., Hort, N. & Kainer, K. U., 2004, In: International SAMPE Symposium and Exhibition (Proceedings). 49, p. 307-317 11 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    99. 2003

    100. Effect of thermal treatment on thermal expansion behaviour of magnesium alloy based hybrid composites

      Thakur, S. K., Dhindaw, B. K., Hort, N. & Kainer, K. U., 01.08.2003, In: Materials Science Forum. 426-432, 3, p. 2027-2032 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    101. New development in magnesium technology for light weight structures in transportation industries

      Göken, J., Bohlen, J., Hort, N., Letzig, D. & Kainer, K. U., 01.08.2003, In: Materials Science Forum. 426-432, 1, p. 153-160 8 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    102. Corrosion behaviour of magnesium alloys with RE additions in sodium chloride solutions

      Morales, E. D., Ghali, E., Hort, N., Dietzel, W. & Kainer, K. U., 15.03.2003, In: Materials Science Forum. 419-422, II, p. 867-872 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    103. Influence of heat treatment on microstructure of hot extruded AZ31

      Dzwonczyk, J., Bohlen, J., Hort, N. & Kainer, K. U., 01.03.2003, In: Materials Science Forum. 419-422, I, p. 297-302 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    104. Some studies on Mg alloy reinforced with ceramic discontinuous phases

      Thakur, S. K., Dhindaw, B. K., Hort, N. & Kainer, K. U., 2003, In: Materials Science Forum. 419-422, II, p. 837-842 6 p.

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    105. 1999

    106. An improved performance super high strength copper nickel alloy for use in offshore oil & gas and other marine environments

      Tuck, C. D. S., Hort, N. & Mordike, B. L., 1999, In: NACE - International Corrosion Conference Series. 4/1999

      Research output: Journal contributions › Conference article in journal › Research › peer-review

    Previous 1 2 3 4 Next