1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Benjamin Klusemann
  7. //
  8. Publications
  9. //

Benjamin Klusemann

Prof. Dr.

Benjamin Klusemann

Contact

Prof. Dr. Benjamin Klusemann

    Research areas

  • Engineering - mechanics, process simulation, material modeling, Modeling & Simulation, continuum mechanics, finite element method

Links

Advanced search options
Advanced search options

Reset

to
1 - 100 out of 213Page size: 100
  1. 2025
  2. Published

    Generative 3D reconstruction of Ti-6Al-4V basketweave microstructures by optimization of differentiable microstructural descriptors

    Blümer, V., Safi, A. R., Soyarslan, C., Klusemann, B. & van den Boogaard, T., 01.06.2025, In: Acta Materialia. 291, 10 p., 120947.

    Research output: Journal contributions › Journal articles › Research › peer-review

  3. Published

    The ESAFORM benchmark 2023: interlaboratory comparison benchmark for the characterization of microstructural grain growth and dynamic recrystallization kinetics of a single-phase Ni-base superalloy

    Agirre, J., Bernal, D., Flipon, B., Bernacki, M., Brüggemann, H., Bailly, D., Merklein, M., Hagenah, H., Risse, J. H., Madej, Ł., Muszka, K., Cichocki, K., Poloczek, Ł., Bylya, O., Reshetov, A., De Micheli, P., Barlier, J., Stark, A., Suhuddin, U. F. H., Staron, P., Klusemann, B. & Galdos, L., 06.2025, In: International Journal of Material Forming. 18, 2, 36 p., 33.

    Research output: Journal contributions › Journal articles › Research › peer-review

  4. Published

    Enhanced dissimilar aluminum alloy joints using 0.1 mm offset in refill friction stir spot welding

    Maranho, J. F. C., Cui, F., Tang, H., Feng, X., Luan, H., Shen, J., Wolf, W., Freitas, B. J. M., Li, W., Alcântara, N. G. D., Santos, J. F. D., Klusemann, B. & Koga, G. Y., 01.05.2025, In: Journal of Materials Research and Technology. 36, p. 1091-1104 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  5. Published

    Fatigue life enhancement via residual stress engineering due to local forming during refill friction stir spot welding

    Becker, N., Kuhn, D., Piochowiak, J. & Klusemann, B., 01.05.2025, In: Journal of Materials Research and Technology. 36, p. 2951-2959 9 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  6. Published

    Friction surfacing of aluminum alloys on Ti6Al4V - Investigation of process parameters, material deposition behavior and bonding mechanisms

    Hoffmann, M., Roos, A. & Klusemann, B., 01.05.2025, In: Surface and Coatings Technology. 503, 12 p., 131985.

    Research output: Journal contributions › Journal articles › Research › peer-review

  7. Published

    La-Ni-H metal hydride system aging effects identification

    Shang, Y., Chen, T., Karimi, F., Le, T. T., Markmann, J., Embs, J. P., Klusemann, B., Klassen, T. & Pistidda, C., 15.04.2025, In: Chemical Engineering Journal. 510, 15 p., 161682.

    Research output: Journal contributions › Journal articles › Research › peer-review

  8. Published

    Impact of friction stir welding-like heat cycles on precipitates in AA7050 analysed by SAXS and numerical modelling

    Henninger, S., Chafle, R., Maawad, E., Klusemann, B., Müller, M. & Staron, P., 01.03.2025, In: Materialia. 39, 8 p., 102343.

    Research output: Journal contributions › Journal articles › Research › peer-review

  9. E-pub ahead of print

    Improving mechanical properties of constrained friction processing Mg-Zn-Ca alloys by modifying texture using multiple pass processing

    Chen, T., Fu, B., Suhuddin, U. F. H. R., Shen, T., Li, G., Maawad, E., Shen, J., Santos, J. F. D., Bergmann, J. P. & Klusemann, B., 10.10.2025, In: Journal of Materials Science and Technology. 232, p. 209-226 18 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  10. Published

    Effect of ambient conditions in friction surfacing

    Hoffmann, M., Duda, E. A., Aspes, P. & Klusemann, B., 02.2025, In: Welding in the World. 69, 2, p. 397-406 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  11. E-pub ahead of print

    Mechanical behavior, microstructural evolution and texture analysis of AA2024-T351 processed by multi-layer friction surfacing with high build rates

    Hoffmann, M., Roos, A. & Klusemann, B., 29.01.2025, (E-pub ahead of print) In: Progress in Additive Manufacturing. 15 p., 146582.

    Research output: Journal contributions › Journal articles › Research › peer-review

  12. Published

    Enhancement of the mechanical properties of semi-stationary bobbin tool friction stir welded joints in AA2219 through post-weld heat treatment

    Rezende, G. N., Bernardi, M., Hoffmann, M., Bergmann, L., Zepon, G. & Klusemann, B., 01.01.2025, In: Materials Science and Engineering: A. 920, 11 p., 147498.

    Research output: Journal contributions › Journal articles › Research › peer-review

  13. Published

    Deformation by design: data-driven approach to predict and modify deformation in thin Ti-6Al-4V sheets using laser peen forming

    Sala, S. T., Bock, F. E., Pöltl, D., Klusemann, B., Huber, N. & Kashaev, N., 01.2025, In: Journal of Intelligent Manufacturing. 36, 1, p. 639-659 21 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  14. Accepted/In press

    Thermal Degradation and Decomposition of FR4 Laminate PCB Substrates Joined by Friction Riveting

    Rodrigues, C. F., Blaga, L. & Klusemann, B., 2025, (Accepted/In press) In: Applied Composite Materials. 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  15. 2024
  16. Published

    Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys

    Antunes Duda, E., Kallien, Z., da Silva Soares, S., Hernandez Schneider, T., Ribeiro Piaggio Cardoso, H., Vieira Braga Lemos, G., Falcade, T., Reguly, A. & Klusemann, B., 12.2024, In: Scientific Reports. 14, 1, 10 p., 9882.

    Research output: Journal contributions › Journal articles › Research › peer-review

  17. Published

    Insight into layer formation during friction surfacing: Relationship between deposition behavior and microstructure

    Hoffmann, M., Kallien, Z., Antunes Duda, E. & Klusemann, B., 12.2024, In: Materials Today Communications. 41, 13 p., 110337.

    Research output: Journal contributions › Journal articles › Research › peer-review

  18. Published

    Analysis of mechanical properties and microstructure of single and double-pass friction stir welded T-joints for aluminium stiffened Panels

    Wagner, D., Bernardi, M., Grassel, F., Chen, T., Schimanski, K., Bergmann, L. & Klusemann, B., 11.2024, In: Materials and Design. 247, 11 p., 113438.

    Research output: Journal contributions › Journal articles › Research › peer-review

  19. Published

    Local and global mechanical properties of orbital friction stir welding on API X65 PSL2 steel / Inconel 625 clad pipes

    Volff Amavisca, C., Vieira Braga Lemos, G., Dornelles Ramos, F., Bergmann, L., Reguly, A. & Klusemann, B., 10.2024, In: International Journal of Advanced Manufacturing Technology. 134, 7-8, p. 3325-3336 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  20. Published

    Fatigue crack initiation and propagation in plain and notched PBF-LB/M, WAAM, and wrought 316L stainless steel specimens

    Braun, M., Chen, T., Shen, J., Fassmer, H., Klusemann, B., Sheikhi, S., Ehlers, S., Müller, E., Sarmast, A. & Schubnell, J., 01.08.2024, In: Materials and Design. 244, 18 p., 113122.

    Research output: Journal contributions › Journal articles › Research › peer-review

  21. Published

    Application of Friction Riveting technique for the assembly of electronic components on printed circuit boards (PCB)

    Rodrigues, C. F., Boas, M. C. V., Blaga, L., Bartz, O. & Klusemann, B., 08.2024, In: International Journal of Advanced Manufacturing Technology. 133, 11-12, p. 5163-5173 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  22. Published

    Feasibility study of friction stir joining of aluminium with carbon fibre reinforced thermoplastic composite

    Malaske, L., Blaga, L. A., Bermann, L., Ahmad, B., Zhang, X. & Klusemann, B., 07.2024, In: Journal of Composite Materials. 58, 17, p. 1987-2003 17 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  23. Published

    Ductility and fracture behavior of cold spray additive manufactured zinc

    Huang, C. J., Chen, T., Fu, B. L., Zhang, Z. M., List, A., Wiehler, L., Klusemann, B., Li, W. Y., Gärtner, F. & Klassen, T., 05.06.2024, In: Additive Manufacturing. 89, 16 p., 104310.

    Research output: Journal contributions › Journal articles › Research › peer-review

  24. Published

    CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems

    Mathew, E., Chafle, R. & Klusemann, B., 01.06.2024, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 85, 14 p., 102692.

    Research output: Journal contributions › Journal articles › Research › peer-review

  25. Published

    Effect of thermo-mechanical conditions during constrained friction processing on the particle refinement of AM50 Mg-alloy phases

    de Castro, C. C., Neves, A. M. & Klusemann, B., 06.2024, In: Journal of Magnesium and Alloys. 12, 6, p. 2298-2311 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  26. Published

    Behavior of volumetric core defects in friction extrusion of wire from Al-Cu alloy

    Rath, L., Suhuddin, U. F. H. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA: Association of American Publishers, p. 763-770 8 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  27. Published

    Dissimilar welding of aluminum to AlSi-coated steel sheets using refill friction stir spot welding: A feasibility study

    Shen, T., Fu, B., Chen, T., Suhuddin, U. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA: Association of American Publishers, p. 1705-1713 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  28. Published

    Eigenstrain method in simulations of laser peen forming of curved surfaces

    Poltl, D., Teja Sala, S., Kashaev, N. & Klusemann, B., 15.05.2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville: Association of American Publishers, p. 2355-2363 9 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  29. Published

    Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

    Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 05.2024, In: International Journal of Material Forming. 17, 3, 13 p., 26.

    Research output: Journal contributions › Journal articles › Research › peer-review

  30. Published

    Experimental investigation of crack propagation mechanism in refill friction stir spot joints of AA6082-T6

    Becker, N., dos Santos, J. F. & Klusemann, B., 16.04.2024, In: Engineering Fracture Mechanics. 300, 11 p., 109963.

    Research output: Journal contributions › Journal articles › Research › peer-review

  31. Published

    Investigation of microstructural and mechanical properties in AA2024-T351 multi-layer friction surfacing

    Hoffmann, M., Roos, A. & Klusemann, B., 30.03.2024, In: Surface and Coatings Technology. 480, 11 p., 130610.

    Research output: Journal contributions › Journal articles › Research › peer-review

  32. Published

    Behavior of microstructure and mechanical properties in the stir zone of friction stir welded ME21 magnesium alloy

    Pasetti-Roza, A., Victoria-Hernandez, J., Costa Pereira da Cunha, P. H., de Lima Lessa, C. R., Andrei Bergmann, L., Kurz, G., Letzig, D. & Klusemann, B., 01.03.2024, In: Journal of Materials Research and Technology. 29, p. 4895-4901 7 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  33. Published

    Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures

    Kallien, Z., Rath, L., Roos, A. & Klusemann, B., 01.02.2024, In: Additive Manufacturing Letters. 8, 8 p., 100184.

    Research output: Journal contributions › Journal articles › Research › peer-review

  34. Published

    Application of novel constrained friction processing method to produce fine grained biomedical Mg-Zn-Ca alloy

    Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Huang, Y., Wang, M., dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 02.2024, In: Journal of Magnesium and Alloys. 12, 2, p. 516-529 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  35. Published

    Effect of filler materials on the tensile properties and fracture toughness of laser beam welded AA2198 joints under different ageing conditions

    Examilioti, T. N., Karanikolas, D., Riekehr, S., Al-Hamdany, N., Papanikos, P., Klusemann, B., Kashaev, N. & Alexopoulos, N. D., 23.01.2024, In: Engineering Fracture Mechanics. 295, 20 p., 109811.

    Research output: Journal contributions › Journal articles › Research › peer-review

  36. Published

    Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing

    Bock, F. E., Kallien, Z., Huber, N. & Klusemann, B., 01.01.2024, In: Computer Methods in Applied Mechanics and Engineering. 418, Part A, 26 p., 116453.

    Research output: Journal contributions › Journal articles › Research

  37. Published

    Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals

    Lehmann, J., Keller, S., Esterl, F., Kashaev, N., Klusemann, B. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity: ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Cham: Springer International Publishing, Vol. 3. p. 352-362 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  38. Published

    EFFECT OF DIFFERENT RESIDUAL STRESS ENGINEERING TECHNIQUES ON THE RESIDUAL STRESS AND FATIGUE CRACK GROWTH BEHAVIOUR IN AA7075

    Lehmann, J., Ventzke, V., Dorn, F., Knothe-Horstmann, C., Klusemann, B., Kashaev, N. & Ben Khalifa, N., 2024, European Conference on Fracture 2024: Book of Abstracts. Bozic, Z., Domazet, Z., Basan, R., Vrdoljak, M. & Andric, M. (eds.). Zagreb: University of Zagreb, p. 410-410 1 p.

    Research output: Contributions to collected editions/works › Published abstract in conference proceedings › Research

  39. Published

    Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024

    Chan, C. Y. C., Suhuddin, U. F. H. R., Rath, L., Bachiega, F. L. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 3. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Cham: Springer Science and Business Media Deutschland, p. 422-428 7 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  40. Published

    Microstructure refinement by a novel friction-based processing on Mg-Zn-Ca alloy

    Chen, T., Fu, B., Shen, J., Suhuddin, U. F. H. R., Wiese, B., Dos Santos, J. F., Bergmann, J. P. & Klusemann, B., 2024, Material Forming, ESAFORM 2024: The 27th International ESAFORM Conference on Material Forming – ESAFORM 2024. Araujo, A. C., Cantarel, A., Chabert, F., Korycki, A., Olivier, P. & Schmidt, F. (eds.). Millersville, PA : Association of American Publishers, p. 2031-2040 10 p. (Materials Research Proceedings; vol. 41).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  41. Published

    Processability of Mg-Gd Powder via Friction Extrusion

    Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T. & Klusemann, B., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P.-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland, p. 431-441 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  42. 2023
  43. Published

    Author Correction: Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625 (Scientific Reports, (2023), 13, 1, (10669), 10.1038/s41598-023-37913-4)

    Amavisca, C. V., Bergmann, L., de, C. R., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 1 p., 11959.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  44. Published

    Feasibility of orbital friction stir welding on clad pipes of API X65 steel and Inconel 625

    Amavisca, C. V., Bergmann, L., Lessa, C. R. D. L., Schroeder, J. G., Ramos, F. D., Lemos, G. V. B., Reguly, A. & Klusemann, B., 12.2023, In: Scientific Reports. 13, 1, 10 p., 10669.

    Research output: Journal contributions › Journal articles › Research › peer-review

  45. Published

    Friction Stir Welding of Various Aluminium Alloys to Titanium

    Grassel, S. F., Bergmann, L. & Klusemann, B., 29.11.2023, In: Key Engineering Materials. 966, p. 49-54 6 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  46. Published

    Friction surfacing of aluminum to steel: Influence of different substrate surface topographies

    Roos, A., Metternich, F., Kallien, Z., Baumann, J., Ehrich, J., Kipp, M., Hanke, S., Biermann, D. & Klusemann, B., 01.11.2023, In: Materials and Design. 235, 12 p., 112390.

    Research output: Journal contributions › Journal articles › Research › peer-review

  47. Published

    Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion

    Suhuddin, U. F. H., Rath, L., Halak, R. M. & Klusemann, B., 01.11.2023, In: Materials Characterization. 205, 13 p., 113252.

    Research output: Journal contributions › Journal articles › Research › peer-review

  48. Published

    Process parameter assessment on the dissimilar deposition of AA2024-T351 on AA7475-T761 by friction surfacing

    Brandes, A. C., Roos, A., Klusemann, B., Martins, J. D. P., dos Santos, J. F. & Carvalho, A. L. M., 01.11.2023, In: Journal of Materials Research and Technology. 27, p. 7593-7605 13 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  49. Published

    Refill friction stir spot welding of thermoplastic composites: Case study on Carbon-fiber-reinforced polyphenylene sulfide

    Schäfer, H., Blaga, L. A., Stöver, E. & Klusemann, B., 01.10.2023, In: Thin-Walled Structures. 191, 111037.

    Research output: Journal contributions › Journal articles › Research

  50. Published

    Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys

    Kallien, Z., Hoffmann, M., Roos, A. & Klusemann, B., 10.2023, In: JOM: Journal of The Minerals, Metals & Materials Society. 75, 10, p. 4212-4222 11 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  51. Published

    Microstructural development of as-cast AM50 during Constrained Friction Processing: grain refinement and influence of process parameters

    de Castro, C. C., Shen, J., dos Santos, J. F. & Klusemann, B., 01.09.2023, In: Journal of Materials Processing Technology. 318, 11 p., 118018.

    Research output: Journal contributions › Journal articles › Research

  52. Published

    Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing

    Escobar, J., Gwalani, B., Silverstein, J., Ajantiwalay, T., Roach, C., Bergmann, L., dos Santos, J. F., Maawad, E., Klusemann, B. & Devaraj, A., 01.08.2023, In: Materials Characterization. 202, 10 p., 112999.

    Research output: Journal contributions › Journal articles › Research

  53. Published

    Semi-stationary shoulder bobbin-tool: A new approach in tailoring macrostructure and mechanical properties of bobbin-tool friction stir welds in magnesium alloy

    Li, G., Chen, T., Fu, B., Shen, J., Bergmann, L., Zhou, L., Chen, K., Santos, J. F. D. & Klusemann, B., 01.08.2023, In: Journal of Materials Processing Technology. 317, 117984.

    Research output: Journal contributions › Journal articles › Research

  54. Published

    Fatigue behaviour of multi-spot joints of 2024-T3 aluminium sheets obtained by refill Friction Stir Spot Welding with polysulfide sealant

    Bernardi, M., Suhuddin, U. F. H., Fu, B., Gerber, J. P., Bianchi, M., Ostrovsky, I., Sievers, B., Faes, K., Maawad, E., Lazzeri, L., dos Santos, J. F. & Klusemann, B., 01.07.2023, In: International Journal of Fatigue. 172, 107539.

    Research output: Journal contributions › Journal articles › Research › peer-review

  55. Published

    Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing

    Kallien, Z., Knothe-Horstmann, C. & Klusemann, B., 01.07.2023, In: Additive Manufacturing Letters. 6, 7 p., 100154.

    Research output: Journal contributions › Comments / Debate / Reports › Research

  56. Published

    Quasi-in-situ observation of microstructure at the friction interface: Shear deformation, dynamic recrystallization and mechanical responses during friction welding process

    Jin, F., Fu, B., Shen, J., Li, J., Li, W., Santos, J. F. D. & Klusemann, B., 01.06.2023, In: Materials Characterization. 200, 112911.

    Research output: Journal contributions › Journal articles › Research

  57. Published

    Friction Riveting of FR4 substrates for printed circuit boards: Influence of process parameters on process temperature development and joint properties

    Rodrigues, C. F., Blaga, L. & Klusemann, B., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 4639-4649 11 p.

    Research output: Journal contributions › Journal articles › Research

  58. Published

    On anisotropic tensile mechanical behavior of Al-Cu-Li AA2198 alloy under different ageing conditions

    Examilioti, T. N., Li, W., Kashaev, N., Ventzke, V., Klusemann, B., Tiryakioğlu, M. & Alexopoulos, N. D., 01.05.2023, In: Journal of Materials Research and Technology. 24, p. 895-908 14 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  59. Published

    Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing

    Kallien, Z., Roos, A., Knothe-Horstmann, C. & Klusemann, B., 26.04.2023, In: Materials Science & Engineering A. 871, 11 p., 144872.

    Research output: Journal contributions › Journal articles › Research

  60. Published

    Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

    Chan, C. Y. C., Rath, L., Suhuddin, U. F. H. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 515-522 8 p. 56. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  61. Published

    Process characteristics of constrained friction processing of AM50 magnesium alloy

    de Castro, C. C., Shen, J., Dos Santos, J. F. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 3. p. 1739-1746 8 p. 188. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  62. Published

    Process simulation of friction extrusion of aluminum alloys

    Diyoke, G., Rath, L., Chafle, R., Ben Khalifa, N. & Klusemann, B., 19.04.2023, Material Forming: The 26th International ESAFORM Conference on Material Forming - ESAFORM 2023 - held in Kraków, Poland, April 19-21, 2023. Madej, L., Sitko, M. & Perzynski, K. (eds.). Millersville: MaterialsResearchForum LLC, Vol. 1. p. 487-494 8 p. (Materials Research Proceedings; vol. 28).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  63. Published

    Analysis of a phase‐field finite element implementation for precipitation

    Safi, A. R., Chafle, R. & Klusemann, B., 01.03.2023, In: PAMM. 22, 1, 6 p., e202200238.

    Research output: Journal contributions › Conference article in journal › Research

  64. Published

    Anisotropy and mechanical properties of dissimilar Al additive manufactured structures generated by multi-layer friction surfacing

    Rath, L., Kallien, Z., Roos, A., dos Santos, J. F. & Klusemann, B., 03.2023, In: The International Journal of Advanced Manufacturing Technology. 125, 5-6, p. 2091-2102 12 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  65. Published

    Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser-Based Powder Bed Fusion

    Taghipour, A., Mazaheri, Y., McDavid, J., Sheikhi, S., Braun, M., Shen, J., Klusemann, B. & Ehlers, S., 02.2023, In: Advanced Engineering Materials. 25, 4, 16 p., 2201230.

    Research output: Journal contributions › Journal articles › Research › peer-review

  66. Published

    Effect of Welding Speed on Friction Stir Welds of PM2000 Alloy

    Wang, J., Fu, B., Bergmann, L., Liu, F. & Klusemann, B., 01.2023, In: Journal of Materials Engineering and Performance. 32, 2, p. 577-586 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  67. 2022
  68. Published

    Heterogenous activation of dynamic recrystallization and twinning during friction stir processing of a Cu-4Nb alloy

    Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Ajantiwalay, T., Overman, N., Fu, W., Li, Y., Bergmann, L., Maawad, E., Klusemann, B., Santos, J. F. D. & Devaraj, A., 20.12.2022, In: Journal of Alloys and Compounds. 928, 9 p., 167007.

    Research output: Journal contributions › Journal articles › Research › peer-review

  69. Published

    Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study

    Sandmann, P., Keller, S., Kashaev, N., Ghouse, S., Hooper, P. A., Klusemann, B. & Davies, C. M., 01.12.2022, In: Additive Manufacturing. 60, Part A, 14 p., 103204.

    Research output: Journal contributions › Journal articles › Research

  70. Published

    Modeling of temperature- and strain-driven intermetallic compound evolution in an Al-Mg system via a multiphase-field approach with application to refill friction stir spot welding

    Raza, S. H., Mittnacht, T., Diyoke, G., Schneider, D., Nestler, B. & Klusemann, B., 01.12.2022, In: Journal of the Mechanics and Physics of Solids. 169, 105059.

    Research output: Journal contributions › Journal articles › Research › peer-review

  71. Published

    Comparing the fatigue performance of Ti-4Al-0.005B titanium alloy T-joints, welded via different friction stir welding sequences

    Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B. & Vairis, A., 24.11.2022, In: Materials Science & Engineering A. 859, 144227.

    Research output: Journal contributions › Journal articles › Research › peer-review

  72. Published

    A multi-scaled process study of dissimilar friction stir welding of Eurofer RAFM steel to PM2000 ODS alloy

    Wang, J., Fu, B., Shen, J., Bergmann, L., Lu, X., dos Santos, J. F. & Klusemann, B., 01.09.2022, In: Journal of Materials Processing Technology. 307, 117679.

    Research output: Journal contributions › Journal articles › Research › peer-review

  73. Published

    Effect of rotational speed and double-sided welding in friction stir–welded dissimilar joints of aluminum alloy and steel

    Bergmann, L. A., Batistão, B. F., de Alcântara, N. G., Gargarella, P. & Klusemann, B., 01.09.2022, In: Welding in the World. 66, 9, p. 1747-1756 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  74. Published

    Tool wear mechanisms and effects on refill friction stir spot welding of AA2198-T8 sheets

    Castro, C. C. D., Shen, J., Plaine, A. H., Suhuddin, U. F. H., Alcântara, N. G. D., Santos, J. F. D. & Klusemann, B., 01.09.2022, In: Journal of Materials Research and Technology. 20, p. 857-866 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  75. Published

    Comparison of Friction Extrusion Processing from Bulk and Chips of Aluminum-Copper Alloys

    Rath, L., Suhuddin, U. F. H. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 471-480 10 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  76. Published

    Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN

    Sikhamov, R., Ventzke, V., Dorn, F., Klusemann, B., Khalifa, N. B. & Kashaev, N., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 939-946 8 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  77. Published

    Experimental Investigation of Efficiency and Deposit Process Temperature During Multi-Layer Friction Surfacing

    Kallien, Z., Roos, A. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 187-193 7 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  78. Published

    Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens

    Pöltl, D., Keller, S., Chupakhin, S., Sala, S. T., Kashaev, N. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 2293-2302 10 p. (Key Engineering Materials; vol. 926).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  79. Published

    Effect of laser peen forming process parameters on bending and surface quality of Ti-6Al-4V sheets

    Sala, S. T., Keller, S., Chupakhin, S., Pöltl, D., Klusemann, B. & Kashaev, N., 01.07.2022, In: Journal of Materials Processing Technology. 305, 16 p., 117578.

    Research output: Journal contributions › Journal articles › Research › peer-review

  80. Published

    Experimental and numerical investigation of laser beam-welded Al-Cu-Li joints using micro-mechanical characteristics

    Examilioti, T. N., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.07.2022, In: Journal of Materials Research and Technology. 19, p. 2431-2446 16 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  81. Published

    Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing

    Soujon, M., Kallien, Z., Roos, A., Zeller-Plumhoff, B. & Klusemann, B., 01.07.2022, In: Materials and Design. 219, 15 p., 110786.

    Research output: Journal contributions › Journal articles › Research › peer-review

  82. Published

    Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing

    Kallien, Z. & Klusemann, B., 15.05.2022, In: Surface and Coatings Technology. 437, 11 p., 128350.

    Research output: Journal contributions › Journal articles › Research › peer-review

  83. Published

    Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum

    Halak, R. M., Rath, L., Suhuddin, U. F. H. R., dos Santos, J. F. & Klusemann, B., 01.05.2022, In: International Journal of Material Forming. 15, 3, 14 p., 24.

    Research output: Journal contributions › Journal articles › Research › peer-review

  84. Published

    Tailoring powder strengths for enhanced quality of cold sprayed Al6061 deposits

    Huang, C., List, A., Shen, J., Fu, B., Yin, S., Chen, T., Klusemann, B., Gärtner, F. & Klassen, T., 01.03.2022, In: Materials and Design. 215, 18 p., 110494.

    Research output: Journal contributions › Journal articles › Research › peer-review

  85. Published

    Coupled Modeling Approach for Laser Shock Peening of AA2198-T3: From Plasma and Shock Wave Simulation to Residual Stress Prediction

    Pozdnyakov, V., Keller, S., Kashaev, N., Klusemann, B. & Oberrath, J., 01.01.2022, In: Metals. 12, 1, 19 p., 107.

    Research output: Journal contributions › Journal articles › Research › peer-review

  86. Published

    Numerical investigation of laser beam-welded AA2198 joints under different artificial ageing conditions

    Examilioti, T., Germanou, A., Papanikos, P., Kashaev, N., Klusemann, B. & Alexopoulos, N. D., 01.01.2022, In: Procedia Structural Integrity. 42, p. 244-250 7 p.

    Research output: Journal contributions › Conference article in journal › Research

  87. 2021
  88. Published

    Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy

    Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Overman, N., Bergmann, L., dos Santos, J. F., Staron, P., Maawad, E., Klusemann, B., Mathaudhu, S. & Devaraj, A., 20.12.2021, In: Journal of Alloys and Compounds. 887, 13 p., 161351.

    Research output: Journal contributions › Journal articles › Research › peer-review

  89. Published

    Experimental and numerical analysis of refill friction stir spot welding of thin AA7075-T6 sheets

    Janga, V. S. R., Awang, M., Yamin, M. F., Suhuddin, U. F. H., Klusemann, B. & dos Santos, J. F., 06.12.2021, In: Materials. 14, 23, 20 p., 7485.

    Research output: Journal contributions › Journal articles › Research › peer-review

  90. Published

    Simulation of fatigue crack growth in residual‐stress‐afflicted specimen with a phase‐field model

    Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.12.2021, In: PAMM. 21, 1, 2 p., e202100210.

    Research output: Journal contributions › Conference abstract in journal › Research

  91. Published

    Effect of the gap width in AZ31 magnesium alloy joints obtained by friction stir welding

    Chiuzuli, F. R., Batistão, B. F., Bergmann, L. A., Alcântara, N. G. D., dos Santos, J. F., Klusemann, B. & Gargarella, P., 01.11.2021, In: Journal of Materials Research and Technology. 15, p. 5297-5306 10 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  92. Published

    Revealing joining mechanism in refill friction stir spot welding of AZ31 magnesium alloy to galvanized DP600 steel

    Fu, B., Shen, J., Suhuddin, U. F. H. R., Pereira, A. A. C., Maawad, E., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.11.2021, In: Materials and Design. 209, 18 p., 109997.

    Research output: Journal contributions › Journal articles › Research › peer-review

  93. Published

    Improved mechanical properties of cast Mg alloy welds via texture weakening by differential rotation refill friction stir spot welding

    Fu, B., Shen, J., Suhuddin, U. F. H. R., Chen, T., dos Santos, J. F., Klusemann, B. & Rethmeier, M., 01.10.2021, In: Scripta Materialia. 203, 6 p., 114113.

    Research output: Journal contributions › Journal articles › Research › peer-review

  94. Published

    Tailoring of residual stresses by specific use of defined prestress during laser shock peening

    Schwab, K. C., Keller, S., Kashaev, N. & Klusemann, B., 01.09.2021, In: Journal of Materials Processing Technology. 295, 11 p., 117154.

    Research output: Journal contributions › Journal articles › Research › peer-review

  95. Published

    Comparing the local-global deformation mechanism in different friction stir welding sequences of Ti-4Al-0.005B titanium alloy T-joints

    Su, Y., Li, W., Shen, J., Fu, B., dos Santos, J. F., Klusemann, B. & Vairis, A., 17.08.2021, In: Materials Science and Engineering A. 823, 141698.

    Research output: Journal contributions › Journal articles › Research › peer-review

  96. Published

    Modeling precipitation kinetics for multi-phase and multi-component systems using particle size distributions via a moving grid technique

    Herrnring, J., Sundman, B., Staron, P. & Klusemann, B., 15.08.2021, In: Acta Materialia. 215, 14 p., 117053.

    Research output: Journal contributions › Journal articles › Research › peer-review

  97. Published

    Empowering materials processing and performance from data and AI

    Chinesta, F., Cueto, E. & Klusemann, B., 06.08.2021, In: Materials. 14, 16, 4 p., 4409.

    Research output: Journal contributions › Other (editorial matter etc.) › Research

  98. Published

    Effect of filler wire and post weld heat treatment on the mechanical properties of laser beam-welded AA2198

    Examilioti, T. N., Kashaev, N., Ventzke, V., Klusemann, B. & Alexopoulos, N. D., 01.08.2021, In: Materials Characterization. 178, 14 p., 111257.

    Research output: Journal contributions › Journal articles › Research › peer-review

  99. Published

    Phase-field modelling for fatigue crack growth under laser shock peening-induced residual stresses

    Seiler, M., Keller, S., Kashaev, N., Klusemann, B. & Kästner, M., 01.08.2021, In: Archive of Applied Mechanics. 91, 8, p. 3709-3723 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  100. Published

    Influence of Mg content in Al alloys on processing characteristics and dynamically recrystallized microstructure of friction surfacing deposits

    Ehrich, J., Roos, A., Klusemann, B. & Hanke, S., 05.07.2021, In: Materials Science and Engineering A. 819, 141407.

    Research output: Journal contributions › Journal articles › Research › peer-review

  101. Published

    Microstructure, mechanical and functional properties of refill friction stir spot welds on multilayered aluminum foils for battery application

    Gera, D., Fu, B., Suhuddin, U. F. H. R., Plaine, A., Alcantara, N., dos Santos, J. F. & Klusemann, B., 01.07.2021, In: Journal of Materials Research and Technology. 13, p. 2272-2286 15 p.

    Research output: Journal contributions › Journal articles › Research › peer-review

  102. Published

    Compression behaviour of wire + arc additive manufactured structures

    Abbaszadeh, M., Ventzke, V., Neto, L., Riekehr, S., Martina, F., Kashaev, N., Hönnige, J., Williams, S. & Klusemann, B., 01.06.2021, In: Metals. 11, 6, 18 p., 877.

    Research output: Journal contributions › Journal articles › Research › peer-review

  103. Published

    Hybrid modelling by machine learning corrections of analytical model predictions towards high-fidelity simulation solutions

    Bock, F. E., Keller, S., Huber, N. & Klusemann, B., 10.04.2021, In: Materials. 14, 8, 19 p., 1883.

    Research output: Journal contributions › Journal articles › Research › peer-review

  104. Published

    Evaluation of mechanical property predictions of refill Friction Stir Spot Welding joints via machine learning regression analyses on DoE data

    Bock, F. E., Paulsen, T., Brkovic, N., Rieckmann, L., Kroeger, D., Wolgast, D., Zander, P., Suhuddin, U. F. H., dos Santos, J. F. & Klusemann, B., 02.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 11 p. 2589. (ESAFORM 2021 - 24th International Conference on Material Forming).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

  105. Published

    Deformation and Anchoring of AA 2024-T3 rivets within thin printed circuit boards

    Antunes Viallas Boas, M. C., Rodrigues, C. F., Blaga, L. A., dos Santos, J. F. & Klusemann, B., 01.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 12 p. 21.4327. (ESAFORM 2021).

    Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

Previous 1 2 3 Next

Recently viewed