Institute for production technology and systems
Organisational unit: Institute
- Professorship for Engineering, in particular Modelling and Simulation of Technical Systems and Processes
- Professorship for Machine Tools
- Professorship for Manufacturing – Innovative Manufacturing
- Professorship for materials mechanics
- Professorship for Materials Technology, in particular of Magnesium Materials
- Professorship for Process Measurement Technology and Intelligent Systems
- Professorship for Product Development and Design
- Professorship of Control and Drive Systems
- Professorship of Production Management
Organisation profile
The members of the Institute for Production Technology and Systems (IPTS) carry out work on a wide range of engineering-related research questions.
When it comes to subjects, the members of the Institute concentrate on the topics of supply chain management and production management, as well as on measurement, control, plasma, production and material technology. Within these fields, we aim to answer current research questions through both experimental work and the use of digital modelling. Our overarching goal here is to provide better solution strategies for complex problems within the field of engineering.
Topics
Die Forschungsschwerpunkte des IPTS liegen im Bereich neuer Produktionstechnologien und Produktionssysteme. Dazu gehören nicht nur neue Technologien für Produktinnovationen, sondern auch die Entwicklung von Prozessen, Systemen, Komponenten, Ausrüstungen und Dienstleistungen.
Forschungsziele sind unter anderem die Optimierung der wertschöpfenden Prozessschritte und Minderung indirekter Arbeitsschritte wie Transport, Handhabungsschritte, Nacharbeit und Qualitätsüberprüfung.
Ein wichtiger Aspekt ist dabei immer der schonende Umgang mit den weltweit knapper werdenden Ressourcen. Innovative, effizient gestaltete Produktions- und Servicesysteme bilden einen weiteren Forschungschwerpunkt. Von besonderer Relevanz für die Forschung in der Produktion ist die ganzheitliche Bewertung von Lebenszykluskosten bei der Produktionsplanung.
- Article in conference proceedings › Research › Peer-reviewed
- Published
Ein piezohydraulischer vollvariabler Ventilantrieb eines Verbrennungsmotors
Werner, N., Mercorelli, P., Becker, U., Harndorf, H. & Van Niekerk, T., 01.2013, Der Antrieb von morgen 2013, 8 MTZ-Fachtagung: 8. MTZ-Fachtagung ; Tagungsdokumentation. ATZ live, Vol. CD-ROM. 16 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Electrical Resistivity of Binary Mg Alloys
Zhang, X., Huang, Y., Kodetová, V., Vlach, M. & Hort, N., 2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 43-49 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Employing a Novel Metaheuristic Algorithm to Optimize an LSTM Model: A Case Study of Stock Market Prediction
Dastgerdi, A. K. & Mercorelli, P., 01.01.2023, Advances in Computing and Data Sciences: 7th International Conference, ICACDS 2023, Kolkata, India, April 27–28, 2023, Revised Selected Papers. Singh, M., Tyagi, V., Gupta, P. K., Flusser, J. & Ören, T. (eds.). Cham: Springer International Publishing AG, p. 478-489 12 p. (Communications in Computer and Information Science; vol. 1848).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Enabling Road Condition Monitoring with an on-board Vehicle Sensor Setup
Kortmann, F., Peitzmeier, H., Meier, N., Heger, J. & Drews, P., 10.2019, 2019 IEEE Sensors, SENSORS 2019 - Conference Proceedings: Conference proceedings. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 4 p. 8956699. (Proceedings of IEEE Sensors; vol. 2019-October).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Energy Optimization in Motion Planning of a Two-Link Manipulator using Bernstein Polynomials
Stephan, R., Mercorelli, P. & Belda, K., 31.05.2021, 2021 22nd International Carpathian Control Conference, ICCC 2021. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., 6 p. 9454630. (International Carpathian Control Conference, ICCC ; no. 22).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Entscheidungsbäume und bestärkendes Lernen zur dynamischen Auswahl von Reihenfolgeregeln in einem flexiblen Produktionssystem
Heger, J., Zein El Abdine, M., Sekar, S. & Voß, T., 26.08.2021, Simulation in Produktion und Logistik 2021: Erlangen, 15. - 17. September 2021. Franke, J. & Schuderer, P. (eds.). Göttingen: Cuvillier Verlag, p. 337-346 10 p. (ASIM-Mitteilung; vol. AM 177).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Estimation of Parameters in the SIR Model Using a Particle Swarm Optimization Algorithm
Marquardt, N., Hendriok, L., Haus, B. & Mercorelli, P., 2024, Advances in Data-Driven Computing and Intelligent Systems - Selected Papers from ADCIS 2023. Das, S., Saha, S., Coello, C. A. C., Rathore, H. & Bansal, J. C. (eds.). Springer Science and Business Media Deutschland GmbH, p. 157-167 11 p. (Lecture Notes in Networks and Systems; vol. 890).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Evaluation of mechanical property predictions of refill Friction Stir Spot Welding joints via machine learning regression analyses on DoE data
Bock, F. E., Paulsen, T., Brkovic, N., Rieckmann, L., Kroeger, D., Wolgast, D., Zander, P., Suhuddin, U. F. H., dos Santos, J. F. & Klusemann, B., 02.04.2021, ESAFORM 2021: 24th International Conference on Material Forming. Liège: ULiège Library, 11 p. 2589. (ESAFORM 2021 - 24th International Conference on Material Forming).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Evaluation of Time/Phase Parameters in Frequency Measurements for Inertial Navigation Systems
Murrieta-Rico, F. N., Mercorelli, P., Rodriguez-Quinonez, J. C., Flores-Fuentes, W., Sergiyenko, O., Rivas-Lopez, M., Mercado-Herrera, A., Garate-Garci, A. & Tyrsa, V., 01.06.2022, 2022 IEEE 31st International Symposium on Industrial Electronics (ISIE). Piscataway: Institute of Electrical and Electronics Engineers Inc., p. 1153-1157 5 p. (IEEE International Symposium on Industrial Electronics; vol. 2022-June).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental analysis of measurement process for a QCM using the pulse coincidence method
Murrieta-Rico, F. N., Petranovskii, V., Sergiyenko, O., Mercorelli, P., Antúnez-Garcia, J., Sanchez-Lopez, J. D. D. & Yocupicio-Gaxiola, R. I., 10.2019, IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 4657-4662 6 p. 8927337. (IECON Proceedings (Industrial Electronics Conference); vol. 2019-October).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental and Numerical Investigation of the Forming Zone in Dieless Wire Drawing Process of Thin Biometallic Wires
Braatz, M., Bohlen, J. & Ben Khalifa, N., 2024, Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity - ICTP 2023 - Volume 1. Mocellin, K., Bouchard, P-O., Bigot, R. & Balan, T. (eds.). Springer Science and Business Media Deutschland GmbH, Vol. Volume 1. p. 479-490 12 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental Investigation of Efficiency and Deposit Process Temperature During Multi-Layer Friction Surfacing
Kallien, Z., Roos, A. & Klusemann, B., 22.07.2022, Achievements and Trends in Material Forming: Peer-reviewed extended papers selected from the 25 th International Conference on Material Forming (ESAFORM 2022). Vincze, G. & Barlat, F. (eds.). Baech: Trans Tech Publications Ltd, p. 187-193 7 p. (Key Engineering Materials; vol. 926).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental investigation of the fluid-structure interaction during deep drawing of fiber metal laminates in the in-situ hybridization process
Kruse, M. & Ben Khalifa, N., 19.04.2023, Material Forming - The 26th International ESAFORM Conference on Material Forming – ESAFORM 2023: ESAFORM 2023. Madej, L., Sitko, M. & Perzynsk, K. (eds.). MaterialsResearchForum LLC, Vol. 28. p. 977-986 10 p. (Materials Research Proceedings; vol. 28).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Experimental Setup of Dieless Drawing Process for Magnesium Wire
Braatz, M., Dieckmann, A., Bohlen, J. & Ben Khalifa, N., 05.09.2021, Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden 2021. Behrens, B-A., Brosius, A., Drossel, W-G., Hintze, W., Ihlenfeldt, S. & Nyhuis, P. (eds.). Cham: Springer Nature Switzerland AG, p. 38-46 9 p. (Lecture Notes in Production Engineering; vol. Part F1160).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Fatigue crack propagation influenced by laser shock peening introduced residual stress fields in aluminium specimens
Keller, S., Horstmann, M., Kashaev, N. & Klusemann, B., 01.01.2020, ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing: Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, 2019. Niepokolczycki, A. & Komorowski, J. (eds.). Cham, Schweiz: Springer, p. 617-631 15 p. (Lecture Notes in Mechanical Engineering).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Fatigue Life Extension of AA2024 Specimens and Integral Structures by Laser Shock Peening
Kashaev, N., Chupakhin, S., Ventzke, V., Horstmann, M., Riekehr, S., Barbini, A., dos Santos, J., Keller, S., Klusemann, B. & Huber, N., 25.05.2018, MATEC Web of Conferences: 12th International Fatigue Congress (FATIGUE 2018) . G, H. (ed.). EDP Sciences, Vol. 165. 6 p. 18001. (MATEC Web of Conferences; vol. 165).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Faulty Process Detection Using Machine Learning Techniques
Dastgerdi, A. K., Lange, D. & Mercorelli, P., 11.07.2023, Congress on Smart Computing Technologies : Proceedings of CSCT 2022. Bansal, J. C., Sharma, H. & Chakravorty, A. (eds.). Springer Singapore, p. 321-333 13 p. (Smart Innovation, Systems and Technologies).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
FFTSMC with Optimal Reference Trajectory Generated by MPC in Robust Robotino Motion Planning with Saturating Inputs
Hedman, M. & Mercorelli, P., 25.05.2021, 2021 American Control Conference (ACC). Piscataway: IEEE - Institute of Electrical and Electronics Engineers Inc., p. 1470-1477 8 p. 9482876. (Proceedings of the American Control Conference).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Flexible Manufacturing of Concave–Convex Parts by Incremental Sheet Forming with Active Medium
Thiery, S. & Ben Khalifa, N., 2021, Forming the Future: Proceedings of the 13th International Conference on the Technology of Plasticity. Daehn, G., Cao, J., Kinsey, B., Tekkaya, E., Vivek, A. & Yoshida, Y. (eds.). Cham: Springer, p. 549-561 13 p. (The Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Flow Behavior Investigation during Miniaturized Extrusion of Aluminum (AA6082) and Magnesium (AZ31)
Nienaber, M., Esterl, F., Lehmann, J., Bohlen, J. & Ben Khalifa, N., 2024, Thirteenth International Aluminum Extrusion Technology Seminar (ET'24): April 30 - May 02 2024, Orlando, Florida, USA. Extrusion Technology for Aluminum Profiles Foundation, Vol. 1. p. 1-7 7 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review