Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM)

Publikation: Beiträge in SammelwerkenAndere (Vor- und Nachworte ...)Forschung

Standard

Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM). / Fuhrhop, Carlos; Georgiadis, Anthimos.
SPM on SPM 2012: International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials. University of Twente, 2012. S. 92-93.

Publikation: Beiträge in SammelwerkenAndere (Vor- und Nachworte ...)Forschung

Harvard

Fuhrhop, C & Georgiadis, A 2012, Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM). in SPM on SPM 2012: International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials. University of Twente, S. 92-93, International Conference on Sanning Probe Microscopy on Soft and Polymeric Materials - SPM 2012, Rolduc Abbey, Kerkrade, Niederlande, 23.09.12.

APA

Fuhrhop, C., & Georgiadis, A. (2012). Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM). In SPM on SPM 2012: International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials (S. 92-93). University of Twente.

Vancouver

Fuhrhop C, Georgiadis A. Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM). in SPM on SPM 2012: International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials. University of Twente. 2012. S. 92-93

Bibtex

@inbook{680933ca88f14b77a0371a1cb3120feb,
title = "Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM)",
abstract = "We investigate the properties of the Polymers nanofibers for its application as sensors element. Hence, are very important the geometrical, mechanical and electrical properties of the fibers in order to determine the working range, the sensibility and the minimal detection limits of the fiber. We produce the fibers by the electrospinning methods; it is a simple and quick technique for producing fibers with nanoscale diameters from a wide range of materials. In this process, a strong electric field causes a viscous solution to form a Taylor cone, from which a thin fluid jet is formed. This fluid jet may harden by a variety of processes and become a continuous fiber, which is collected at the negative electrode as electrospun, see figure.Here we present the first step in order to determine the geometrical and the mechanical properties of the Polyethylene oxide fibers. We have deposited PEO electrospun fibers by electrospinning over a glass plate and used the AFM nanoindentation method to calculate the Young{\textquoteright}s modulus of the fiber, and its geometrical properties also by Atomic Force Microscope. In order to calculate the Young{\textquoteright} modulus we used nanoindentation based on contact mechanic model. We present the results of the calculation of the Young's modulus of the fiber and the dependence between the Young{\textquoteright}s modulus and its diameter. From the results we have observed an exponential dependence between the Young{\textquoteright}s modulus and the diameter.To apply the nanoindentation model we need to know the geometry of the cantilever{\textquoteright}s tip of the AFM. This information is not always possible to obtain from the data sheet of the AFM-cantilever and when this information is not available, we calculate the geometry of the cantilever{\textquoteright}s tip using Confocal Laser Scanning Microscope (CLSM). With this method we can calculate the face angle of the tip, which we needed for the Hertz model. Here we present these results, the angle and the 3D shape of the tip, calculated by CLSM, see figure.",
keywords = "Engineering",
author = "Carlos Fuhrhop and Anthimos Georgiadis",
year = "2012",
month = sep,
day = "23",
language = "English",
isbn = "978-90-365-3440-6",
pages = "92--93",
booktitle = "SPM on SPM 2012",
publisher = "University of Twente",
address = "Netherlands",
note = "International Conference on Sanning Probe Microscopy on Soft and Polymeric Materials - SPM 2012, SPM 2012 ; Conference date: 23-09-2012 Through 26-09-2012",
url = "https://www.chemistryviews.org/details/event/2286741/International_Conference_on_Scanning_Probe_Microscopy_on_Soft_and_Polymeric_Mate.html",

}

RIS

TY - CHAP

T1 - Nanoindentation of Poly(Ethylene Oxide) Nanofibers by Atomic Force Microscope (AFM)

AU - Fuhrhop, Carlos

AU - Georgiadis, Anthimos

PY - 2012/9/23

Y1 - 2012/9/23

N2 - We investigate the properties of the Polymers nanofibers for its application as sensors element. Hence, are very important the geometrical, mechanical and electrical properties of the fibers in order to determine the working range, the sensibility and the minimal detection limits of the fiber. We produce the fibers by the electrospinning methods; it is a simple and quick technique for producing fibers with nanoscale diameters from a wide range of materials. In this process, a strong electric field causes a viscous solution to form a Taylor cone, from which a thin fluid jet is formed. This fluid jet may harden by a variety of processes and become a continuous fiber, which is collected at the negative electrode as electrospun, see figure.Here we present the first step in order to determine the geometrical and the mechanical properties of the Polyethylene oxide fibers. We have deposited PEO electrospun fibers by electrospinning over a glass plate and used the AFM nanoindentation method to calculate the Young’s modulus of the fiber, and its geometrical properties also by Atomic Force Microscope. In order to calculate the Young’ modulus we used nanoindentation based on contact mechanic model. We present the results of the calculation of the Young's modulus of the fiber and the dependence between the Young’s modulus and its diameter. From the results we have observed an exponential dependence between the Young’s modulus and the diameter.To apply the nanoindentation model we need to know the geometry of the cantilever’s tip of the AFM. This information is not always possible to obtain from the data sheet of the AFM-cantilever and when this information is not available, we calculate the geometry of the cantilever’s tip using Confocal Laser Scanning Microscope (CLSM). With this method we can calculate the face angle of the tip, which we needed for the Hertz model. Here we present these results, the angle and the 3D shape of the tip, calculated by CLSM, see figure.

AB - We investigate the properties of the Polymers nanofibers for its application as sensors element. Hence, are very important the geometrical, mechanical and electrical properties of the fibers in order to determine the working range, the sensibility and the minimal detection limits of the fiber. We produce the fibers by the electrospinning methods; it is a simple and quick technique for producing fibers with nanoscale diameters from a wide range of materials. In this process, a strong electric field causes a viscous solution to form a Taylor cone, from which a thin fluid jet is formed. This fluid jet may harden by a variety of processes and become a continuous fiber, which is collected at the negative electrode as electrospun, see figure.Here we present the first step in order to determine the geometrical and the mechanical properties of the Polyethylene oxide fibers. We have deposited PEO electrospun fibers by electrospinning over a glass plate and used the AFM nanoindentation method to calculate the Young’s modulus of the fiber, and its geometrical properties also by Atomic Force Microscope. In order to calculate the Young’ modulus we used nanoindentation based on contact mechanic model. We present the results of the calculation of the Young's modulus of the fiber and the dependence between the Young’s modulus and its diameter. From the results we have observed an exponential dependence between the Young’s modulus and the diameter.To apply the nanoindentation model we need to know the geometry of the cantilever’s tip of the AFM. This information is not always possible to obtain from the data sheet of the AFM-cantilever and when this information is not available, we calculate the geometry of the cantilever’s tip using Confocal Laser Scanning Microscope (CLSM). With this method we can calculate the face angle of the tip, which we needed for the Hertz model. Here we present these results, the angle and the 3D shape of the tip, calculated by CLSM, see figure.

KW - Engineering

M3 - Other

SN - 978-90-365-3440-6

SP - 92

EP - 93

BT - SPM on SPM 2012

PB - University of Twente

T2 - International Conference on Sanning Probe Microscopy on Soft and Polymeric Materials - SPM 2012

Y2 - 23 September 2012 through 26 September 2012

ER -

Zuletzt angesehen

Publikationen

  1. Spectra of the planar Multipole Resonance Probe determined by a Kinetic Model
  2. Mehrsprachigkeit und Interkulturalität in Fremdsprachenportfolios
  3. α- and β-diversity in moth communities in salt marshes is driven by grazing management
  4. Forest Ecosystems: A functional and biodiversity perspective
  5. Mapping Swap Rate Projections on Bond Yields Considering Cointegration
  6. Über die (Un)Möglichkeit Co-Creation zu managen
  7. Innovation by forming technology
  8. Algorithmen? Nein, danke!
  9. Soil chemical legacies trigger species-specific and context-dependent root responses in later arriving plants
  10. Der Noth gehorchend, nicht dem eignen Trieb
  11. What makes reading Alexandra Kollontai so intriguing today?
  12. Wer oder was bestimmt "Wirklichkeit" in Organisationen?
  13. Education for Sustainable Development – European Approaches
  14. Social Entrepreneurship and Broader Theories
  15. Color
  16. Stakeholder and Value Orientation in Digital Social Innovation
  17. Requests in American and British English
  18. Temporary organizing and acceleration
  19. The use of the entropy concept in ecological economics
  20. Costs of Inaction and Costs of Action in Climate Protection
  21. Measuring what matters in sustainable consumption:
  22. Fallarbeit als Angebot – fallbasiertes Lernen als Nutzung
  23. Green sample preparation focusing on organic analytes in complex matrices
  24. Sustainable corporate purpose and sustainable corporate governance: Integrative theoretical framework and reform recommendations
  25. Sustainability Reporting as a Consequence of Environmental Orientation