1. //
  2. Start
  3. //
  4. Researchers
  5. //
  6. Norbert Hort
  7. //
  8. Publications
  9. //

Norbert Hort

Prof. Dr.

Contact

Prof. Dr. Norbert Hort

Links

Advanced search options
Advanced search options

Reset

    to
    1 - 100 out of 390Page size: 100
    Sort by: Type
    1. Article in conference proceedings › Research › Not peer-reviewed
    2. Published

      Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring Tests

      Maier, P., Pamidi, E., Clausius, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 73-80 8 p. (The Minerals, Metals & Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research

    3. Article in conference proceedings › Research › Peer-reviewed

    4. 3D characterization of beta-phases in AZ91D by synchrotron-radiation based microtomography

      Witte, F., Fischer, J., Störmer, M. & Hort, N., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 389-394 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    5. 3D microstructural evolution on solidifying Mg–5Nd–5Zn alloy observed via in situ synchrotron tomography

      Subroto, T., Mendis, C. L., D’Elia, F., Szakács, G., Fife, J. L., Hort, N., Kainer, K. U. & Tolnai, D., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 605-612 8 p. (Minerals, Metals and Materials Series; vol. Part F8).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    6. A comparative study on the microstructure, mechanical properties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium

      Rao, K. P., Suresh, K., Dieringa, H. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 449-461 13 p. (Minerals, Metals and Materials Series; vol. Part F8).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    7. Advances in manufacturing processes for magnesium alloys

      Dieringa, H., Bohlen, J., Hort, N., Letzig, D. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 3-8 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    8. Aluminium-rich coring structures in Mg-Al alloys with carbon inoculation

      Huang, Y., Zheng, X., Okechukwu, A., Kim, G. S., Kainer, K. U. & Hort, N., 2010, PRICM7. Nie, J-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 675-678 4 p. (Materials Science Forum; vol. 654-656).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    9. A new magnesium alloy system: TEXAS

      Wiese, B., Mendis, C., Blawert, C., Nyberg, E., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 231-235 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    10. Approaching bolt load retention behaviour of AS41 through compliance and creep deformation

      Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 215-220 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    11. As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloys

      Szakács, G., Mendis, C. L., Tolnai, D., Vlcek, M., Lukác, F., Stulíková, I., Smola, B., Wolff, M., Schmid-Fetzer, R., Schell, N., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 23-27 5 p. (Magnesium Technology; vol. 2016-January).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    12. Published

      Barrel Finishing of Magnesium Alloys

      Petersen, N., Wiese, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 101-106 6 p. (The Minerals, Metals & Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    13. Castability of magnesium alloys

      Khan, S. S., Hort, N., Steinbach, I. & Schmauder, S., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 197-202 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    14. Castability of some magnesium alloys in a novel castability die

      Easton, M. A., Gibson, M. A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T. B. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 61-64 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    15. Comparative study on corrosion behavior of we33 in immersion and polarization influenced by heat treatment

      Maier, P., Bechly, M., Hess, B., Freese, M. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 227-237 11 p. (Minerals, Metals and Materials Series; vol. Part F12).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    16. Compression creep at 240°C of extruded magnesium alloys containing gadolinium

      Dieringa, H., Hort, N., Müller, S. & Kainer, K. U., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 270-273 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    17. Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions

      Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Dharmendra, C., Hort, N. & Kainer, K. U., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 169-174 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    18. Correlation between mechanical behaviour and microstructure in the Mg-Ca-Si-Sr system for degradable biomaterials based on thermodynamic calculations

      Gil-Santos, A., Szakacs, G., Moelans, N., Hort, N. & Van Der Biest, O., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 431-436 6 p. (Magnesium Technology; vol. 01/2015).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    19. Corrosion and creep resistance of Thixomolded® magnesium alloys

      Buzolin, R., Dieringa, H., Blawert, C., Frank, H., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 381-389 9 p. (Minerals, Metals and Materials Series; vol. Part F8).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    20. Corrosion behavior and microstructure of a broad range of Mg-Sn-X alloys

      Abu Leil, T., Rao, K. P., Hort, N. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 281-286 6 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    21. Corrosion behavior of As-Cast binary Mg-Dy alloys

      Yang, L., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 417-421 5 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    22. Crack propagation under bending in cast MglOGdxNd-T4 alloys

      Maier, P., Mendis, C., Wolff, M. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 77-82 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    23. Creep and hot working behavior of a new magnesium alloy Mg-3Sn-2Ca

      Hort, N., Rao, K. P., Abu Leu, T., Dieringa, H., Prasad, V. Y. R. K. & Kainer, K. U., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 401-406 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    24. Cyclic deformation of newly developed magnesium cast alloys in corrosive environment

      Maier, P., Anopuo, O., Malchau, F., Wienck, G. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 495-498 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    25. Deformation microstructures and textures of cast Mg-3Sn-2Ca alloy under uniaxial hot compression

      Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Mechanical Engineering and Materials: ICMEM 2012. Jin, W. (ed.). Scientific.Net , p. 322-325 4 p. (Applied Mechanics and Materials; vol. 152-154).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    26. Development of a magnesium recycling alloy based on AM50

      Fechner, D., Maier, P., Hort, N. & Kainer, K. U., 15.03.2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 ed. Trans Tech Publications Ltd, p. 108-113 6 p. (Materials Science Forum; vol. 539-543, no. PART 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    27. Development of a magnesium recycling alloy based on the AM alloy system

      Fechner, D., Hort, N., Blawert, C. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleyuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 287-292 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    28. Development of recyclable Mg-based alloys: Az91d and Azc1231 phase information derived from heating/cooling curve analysis

      Gesing, A. J., Reade, N. D., Sokolowski, J. H., Blawert, C., Fechner, D. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 97-105 9 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    29. Effect of Alloying with Rare-Earth Metals on the Degradation of Magnesium Alloys Studied Using a Combination of Isothermal Calorimetry and Pressure Measurements

      Wadsö, L., Hort, N. & Orlov, D., 2019, Magnesium Technology 2019. Orlov, D., Joshi, V. V., Neelameggham, N. R. & Jordon, J. B. (eds.). Cham: Springer International Publishing AG, p. 121-126 6 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    30. Effect of grain size and structure, solid solution elements, precipitates and twinning on nanohardness of Mg-Re alloys

      Maier, P., Richter, A., Tober, G. & Hort, N., 07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 491-495 5 p. (Materials Science Forum; vol. 765).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    31. Published

      Effect of Heat Treatment on the Microstructure and Corrosion Properties of Mg–15Dy–1.5Zn Alloy with LPSO Phase

      Jiang, G., Huang, Y., Gavras, S., Shi, H. & Hort, N., 01.01.2024, Magnesium Technology 2024. Leonard, A., Barela, S., Neelameggham, N. R., Miller, V. M. & Tolnai, D. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 7-13 7 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    32. Effect of heat treatment on the microstructure and creep behavior of Mg-Sn-Ca alloys

      Abu Leil, T., Huang, Y., Dieringa, H., Hort, N., Kainer, K. U., Buršík, J., Jirásková, Y. & Rao, K. P., 01.05.2007, Progress in Light Metals, Aerospace Materials and Superconductors. Lu, Y., Zhang, P., Jiang, C. & Han, Y. (eds.). PART 1 ed. Trans Tech Publications Ltd, p. 69-72 4 p. (Materials Science Forum; vol. 546-549, no. PART 1).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    33. Effect of internal defects on tensile properties of A356 casting alloys

      Cheng, J., Hort, N., Kainer, K. U. & Kwak, S., 2013, METAL 2013 - 22nd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1171-1176 6 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    34. Published

      Effect of LPSO Phases on Crack Propagation in an Extruded Mg–Dy–Nd–Zn–Zr Alloy Influenced by Heat Treatment

      Maier, P., Clausius, B., Richter, A., Bittner, B., Hort, N. & Menze, R., 2021, Magnesium 2021 - Proceedings of the 12th International Conference on Magnesium Alloys and their Applications. Luo, A., Pekguleryuz, M., Agnew, S., Allison, J., Kainer, K., Nyberg, E., Poole, W., Sadayappan, K., Williams, B. & Yue, S. (eds.). Springer Science and Business Media Deutschland GmbH, p. 45-55 11 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    35. Effect of minor additions of Al and Si on the mechanical properties of cast Mg-3Sn-2Ca alloys in low temperature range

      Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 2010, PRICM7. Nie, J-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 635-638 4 p. (Materials Science Forum; vol. 654-656).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    36. Effect of Sn additions on the age hardening response, microstructures and corrosion resistance of Mg-0.8Ca (wt%) alloys

      Mendis, C. L., Tolnai, D., Blawert, C. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 237-241 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    37. Effect of the Zn content on the compression behaviour of Mg5Nd(Zn): An in situ synchrotron radiation diffraction study

      Tolnai, D., Kärcher, T., Buzolin, R., Subroto, T., D’Elia, F., Gavras, S., Stark, A., Schell, N., Hort, N. & Kainer, K. U., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 675-681 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    38. Effects of gadolinium and neodymium addition on young’s modulus of magnesium-based binary alloys

      Xu, Y., Li, J., Zhong, Z., Kainer, K. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 341-347 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    39. Effects of interfacial reactions during solidification on mechanical properties in short fiber reinforced AlSi12CuMgNi composites

      Huang, Y., Hort, N., Dieringa, H. & Kainer, K., 2006, Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium. Gupta, N. & Hunt, W. (eds.). John Wiley & Sons Inc., p. 165-172 8 p. (TMS Annual Meeting; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    40. Effects of Mn and Zn solutes on grain refinement of commercial pure magnesium

      Gu, J., Huang, Y., Zhang, M., Kainer, K. U. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 191-198 8 p. (Minerals, Metals and Materials Series; vol. Part F8).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    41. Published

      Electrical Resistivity of Binary Mg Alloys

      Zhang, X., Huang, Y., Kodetová, V., Vlach, M. & Hort, N., 2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 43-49 7 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    42. Elevated temperature and varied load response of AS41 at bolted joint

      Anopuo, O., Shen, G., Xu, S., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Dargusch, M. S. & Keay, S. M. (eds.). Scientific.Net , p. 509-514 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    43. Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling

      Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Dharmendra, C. & Hort, N., 2019, Magnesium Technology 2019. Neelameggham, N. R., Joshi, V. V., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 313-318 6 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    44. Grain refinement of Mg-Al alloys by carbon inoculation

      Huang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K. U. & Kim, G. S., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 419-424 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    45. High temperature deformation mechanisms and processing map for hot working of cast-homogenized Mg-3Sn-2Ca alloy

      Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2010, THERMEC 2009. Chandra, T., Wanderka, N., Reimers, W. & Ionescu, M. (eds.). Trans Tech Publications Ltd, p. 3616-3621 6 p. (Materials Science Forum; vol. 638-642).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    46. High temperature deformation of cast ZW11 magnesium alloy with very large grain size

      Rao, K. P., Bagheripoor, M., Dieringa, H. & Hort, N., 2017, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 232-237 6 p. (Key Engineering Materials; vol. 725 KEM).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    47. High temperature deformation of magnesium alloy TX32-0.4Al-0.8Si

      Dharmendra, C., Rao, K. P., Hort, N. & Kainer, K. U., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 41-45 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    48. Hot forging behavior of Mg−8Al−4Ba−4Ca (ABaX844) alloy and validation of processing map

      Rao, K. P., Dharmendra, C., Prasad, Y. V. R. K., Dieringa, H. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 289-296 8 p. (Minerals, Metals and Materials Series; vol. Part F7).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    49. Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulation

      Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 449-454 6 p. (Materials Science Forum; vol. 783-786).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    50. Hot rolling and deep drawing of AM50 sheet

      Göken, J., Hort, N., Blawert, C., Steinhoff, K. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 205-210 6 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    51. Hot tearing susceptibility of Mg-5Nd-xZn alloys

      D'Elia, F., Tolnai, D., Mendis, C. L. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 129-134 6 p. (Magnesium Technology; vol. 2016-January).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    52. Influence of cerium on stress corrosion cracking in AZ91D

      Heilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 305-309 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    53. Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91

      Zander, D., Heilig, M., Hort, N., Klaus, G., B̈hrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 381-384 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    54. Influence of Nd in extruded Mg10Gd base alloys on fatigue strength

      Maier, P., Tober, G., Mendis, C. L., Müller, S. & Hort, N., 23.05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 419-424 6 p. (Materials Science Forum; vol. 783-786).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    55. Influence of processing route on the properties of magnesium alloys

      Frank, H., Hort, N., Dieringa, H. & Kainer, K. U., 2008, Semi-Solid Processing of Alloys and Composites X - Selected: peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2008. Trans Tech Publications Ltd, p. 43-48 6 p. (Solid State Phenomena; vol. 141-143).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    56. Influence of strontium, silicon and calcium additions on the properties of the AM50 alloy

      Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 459-462 4 p. (Materials Science Forum; vol. 618 619).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    57. Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn Alloys

      Huang, Y., Gu, J., You, S., Kainer, K. U. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 331-338 8 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    58. Influences of Y additions on the hot tearing susceptibility of Mg-1.5wt.%Zn alloys

      Wang, Z., Huang, Y. D., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 306-310 5 p. (Materials Science Forum; vol. 765).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    59. Influences of yttrium content on microstructure and mechanical properties of as-cast Mg–Ca–Y–Zr alloys

      You, S., Huang, Y., Kainer, K. U. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 91-97 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    60. In situ studies of light metals with synchrotron radiation and neutrons

      Staron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M., Hort, N., Eckerlebe, H., Kainer, K. U., Müller, M. & Schreyer, A., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 192-197 6 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    61. In situ synchrotron diffraction of the solidification of Mg-RE alloys

      Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 253-257 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    62. In situ synchrotron radiation diffraction during melting and solidification of Mg-Al alloys containing CaO

      Wiese, B., Mendis, C. L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H. P., Bruckner, R., Kainer, K. U. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 191-195 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    63. In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)

      Szakacs, G., Wiese, B., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Naira, M., Kainer, K. U. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 213-218 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    64. In situ synchrotron radiation diffraction during solidification of Mgl5Gd: Effect of cooling rate

      Szakács, G., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, K. U., Grobner, J., Schmid-Fetzer, R. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 79-84 6 p. (Magnesium Technology; vol. 01/2015).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    65. Published

      In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy

      Tolnai, D., Gavras, S., Stark, A., Bartosch, M., Witte, F. & Hort, N., 01.01.2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 143-148 6 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    66. In situ tensile texture analysis of a new Mg-RE alloy

      Gan, W. M., Huang, Y. D., Xu, Y. L., Hofmann, M., Kainer, K. U. & Hort, N., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 779-783 5 p. (Materials Science Forum; vol. 879).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    67. Intermetallic phase characteristics in the Mg–Nd–Zn system

      Tolnai, D., Hill, S. A., Gavras, S., Subroto, T., Buzolin, R. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 391-397 7 p. (Minerals, Metals and Materials Series; vol. Part F7).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    68. Investigation and Modelling of the Influence of Cooling Rates on the Microstructure of AZ91 Alloys

      Gavras, S., Bilal, M. U., Tolnai, D. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 281-287 7 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    69. Investigation of compression behavior of Mg-4Zn-2(Nd, Gd)-0.5Zr at 350°C by in situ synchrotron radiation diffraction

      Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 103-107 5 p. (Magnesium Technology; vol. 01/2015).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    70. Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary Alloys

      Xu, Y., Yang, L., Liu, W., Sun, J., Xiao, L., Jiang, X. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 79-85 7 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    71. Investigations in the magnesium-tin system

      Bowles, A. L., Dieringa, H., Blawert, C., Hort, N. & Kainer, K. U., 15.07.2005, Magnesium - Science, Technology and Applications, Mg - Proceedings of the International Conference on Magnesium - Science, Technology and Applications. Ke, W., Han, E. H., Han, Y. F., Kainer, K. U. & Luo, A. A. (eds.). Trans Tech Publications Ltd, p. 135-138 4 p. (Materials Science Forum; vol. 488-489).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    72. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

      Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 105-110 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    73. Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method

      Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Ulrich Kainer, K., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 105-110 6 p. (TMS Annual Meeting).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    74. Investigations on hot tearing of Mg-Zn-(Al) alloys

      Zhou, L., Huang, Y., Mao, P., Kainer, K. U., Liu, Z. & Hort, N., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Nealameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 125-130 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    75. Investigations on microstructure and properties of Mg-Sn-Ca alloys with 3% Al additions

      Elsayed, F. R., Leil, T. A., El-Aziz, A. A., Kainer, K. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    76. In vitro corrosion and cytocompatibility properties of Mg-2Gd-X(Ag, Ca) alloys

      Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 347-351 5 p. (Magnesium Technology; vol. 2016-January).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    77. Low cycle fatigue properties of extruded Mg10GdxNd alloys

      Tober, G., Maier, P., Müller, S. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 115-120 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    78. Machining of hybrid reinforced Mg-MMCs using abrasive water jetting

      Aust, E., Elsäßer, M., Hort, N. & Limberg, W., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 345-349 5 p. (Magnesium Technology; vol. 2006).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    79. Macrostructure evolution in directionally solidified Mg-RE alloys

      Salgado-Ordorica, M. A., Punessen, W., Yi, S., Bohlen, J., Kainer, K. U. & Hort, N., 28.02.2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 113-118 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    80. Magnesium alloy containing silver for degradable biomedical implants

      Lukáč, F., Vlček, M., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kekule, T., Szakács, G., Hort, N. & Kainer, K. U., 2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1086-1091 6 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    81. Magnesium-based metal matrix nanocomposites—processing and properties

      Dieringa, H. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 679-691 13 p. (Minerals, Metals and Materials Series; vol. Part F12).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    82. Magnesium melt protection

      Hort, N., Wiese, B., Dieringa, H. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 78-81 4 p. (Materials Science Forum; vol. 828-829).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    83. Magnesium permanent mold Castings optimization

      Elsayed, F. R., Hort, N., Salgado-Ordorica, M. A. & Kainer, K., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 65-68 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    84. Magnesium pistons in engines: Fiction or fact?

      Hort, N., Dieringa, H. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 349-353 5 p. (Minerals, Metals and Materials Series; vol. Part F7).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    85. Magnesium recycling system prepared by permanent mould- and high pressure die casting

      Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    86. Mechanical and corrosion properties of as-cast and extruded MG10GD alloy for biomedical application

      Maier, P., Müller, S., Dieringa, H. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S., Sillekens, W. & Neelameggham, N. (eds.). The Minerals, Metals & Materials Society, p. 253-259 7 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    87. Mechanical and corrosive properties of two magnesium wires: Mg4Gd and Mg6Ag

      Maier, P., Szakács, G., Wala, M. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 393-398 6 p. (Magnesium Technology; vol. 01/2015).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    88. Mechanical behaviour and corrosion performance of thin film magnesium WE alloys

      Schlüter, K., Reverey, J., Hort, N., Zamponi, C. & Quandt, E., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 286-289 4 p. (Materials Science Forum; vol. 690).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    89. Mechanical properties and microstructures of nano SiC reinforced ZE10 composites prepared with ultrasonic vibration

      Song, J. F., Dieringa, H., Huang, Y. D., Gan, W. M., Kainer, K. U. & Hort, N., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1019).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    90. Metallography of Mg Alloys

      Hort, N., Floss, V., Gavras, S., Wiese, G. & Tolnai, D., 2019, Magnesium Technology 2019. Neelameggham, N. R., Jordon, J. B., Joshi, V. V. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 267-276 10 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    91. Published

      Metastable–Stable

      Hort, N., 02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 11-13 3 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    92. Mg alloys: Challenges and achievements in controlling performance, and future application perspectives

      Dieringa, H., Hort, N., Letzig, D., Bohlen, J., Höche, D., Blawert, C., Zheludkevich, M. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 3-14 12 p. (Minerals, Metals and Materials Series; vol. Part F7).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    93. Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processing

      Pinheiro, G., Santos, J. D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 191-196 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    94. Microstructural approaches of engineering materials: Influences of Dy content and heat treatments on the formation of hydrides in Mg-Dy alloys

      Huang, Y., Yang, L., Wang, Z., Kainer, K. U. & Hort, N., 2013, Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013. University of Patras, p. 971-980 10 p. (Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    95. Microstructural development in tension and compression creep of magnesium alloy AE42

      Dieringa, H., Bowles, A., Hort, N. & Kainer, K. U., 15.04.2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. Pokluda, J. (ed.). Trans Tech Publications Ltd, p. 271-274 4 p. (Materials Science Forum; vol. 482).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    96. Microstructural investigations of MG-AL alloys containing small amount of SiC nucleants

      Huang, Y., Hort, N., Anopuo, O., Kainer, K. U., Vidrich, G., Schiffl, A. & Liu, Y., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 421-426 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    97. Microstructural investigations of the Mg-Sn and Mg-Sn-Al alloy systems

      Bewies, A. L., Blawert, C., Hort, N. & Kainer, K. U., 2004, Magnesium Technology 2004. Luo, A. A. (ed.). The Minerals, Metals & Materials Society, p. 307-310 4 p.

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    98. Microstructure and compression creep strength of the newly developed magnesium alloy DieMag422

      Dieringa, H., Hort, N. & Kainer, K. U., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 177-183 7 p. (Advanced Materials Research; vol. 1019).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    99. Microstructure and corrosion of AZ91 with small amounts of cerium

      Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Grbbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 187-191 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    100. Microstructure and creep properties of MEZ magnesium alloy processed by thixocasting

      Morales Garza, E. D., Dieringa, H., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). Cham: Springer Schweiz, p. 385-389 5 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    101. Published

      Microstructure and Fracture Toughness of an Extruded Mg-Dy-Nd-Zn-Zr Alloy Influenced by Heat Treatment

      Maier, P., Clausius, B., Joy, C., Menze, R., Bittner, B. & Hort, N., 2021, Magnesium Technology 2021. Miller, V. M., Maier, P., Jordon, J. B. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 19-26 8 p. (Minerals, Metals and Materials Series).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    102. Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce

      Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 149-154 6 p. (Magnesium Technology).

      Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review

    Previous 1 2 3 4 Next