Norbert Hort
Prof. Dr.
Contact
Prof. Dr. Norbert Hort
- Engineering
Research areas
- Article in conference proceedings › Research › Not peer-reviewed
- Published
Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd Using C-Ring Tests
Maier, P., Pamidi, E., Clausius, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 73-80 8 p. (The Minerals, Metals & Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research
- Article in conference proceedings › Research › Peer-reviewed
3D characterization of beta-phases in AZ91D by synchrotron-radiation based microtomography
Witte, F., Fischer, J., Störmer, M. & Hort, N., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 389-394 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
3D microstructural evolution on solidifying Mg–5Nd–5Zn alloy observed via in situ synchrotron tomography
Subroto, T., Mendis, C. L., D’Elia, F., Szakács, G., Fife, J. L., Hort, N., Kainer, K. U. & Tolnai, D., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 605-612 8 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
A comparative study on the microstructure, mechanical properties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium
Rao, K. P., Suresh, K., Dieringa, H. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 449-461 13 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Advances in manufacturing processes for magnesium alloys
Dieringa, H., Bohlen, J., Hort, N., Letzig, D. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 3-8 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Aluminium-rich coring structures in Mg-Al alloys with carbon inoculation
Huang, Y., Zheng, X., Okechukwu, A., Kim, G. S., Kainer, K. U. & Hort, N., 2010, PRICM7. Nie, J-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 675-678 4 p. (Materials Science Forum; vol. 654-656).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
A new magnesium alloy system: TEXAS
Wiese, B., Mendis, C., Blawert, C., Nyberg, E., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 231-235 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Approaching bolt load retention behaviour of AS41 through compliance and creep deformation
Anopuo, O., Huang, Y., Hort, N., Dieringa, H. & Kainer, K. U., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 215-220 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
As solidified microstructure investigation of Mg15Y and MgxYyGd (x+y=15 wt.%) ternary alloys
Szakács, G., Mendis, C. L., Tolnai, D., Vlcek, M., Lukác, F., Stulíková, I., Smola, B., Wolff, M., Schmid-Fetzer, R., Schell, N., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 23-27 5 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Barrel Finishing of Magnesium Alloys
Petersen, N., Wiese, B. & Hort, N., 20.02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Cham: Springer Schweiz, p. 101-106 6 p. (The Minerals, Metals & Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Castability of magnesium alloys
Khan, S. S., Hort, N., Steinbach, I. & Schmauder, S., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 197-202 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Castability of some magnesium alloys in a novel castability die
Easton, M. A., Gibson, M. A., Gershenzon, M., Savage, G., Tyagi, V., Abbott, T. B. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 61-64 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Comparative study on corrosion behavior of we33 in immersion and polarization influenced by heat treatment
Maier, P., Bechly, M., Hess, B., Freese, M. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 227-237 11 p. (Minerals, Metals and Materials Series; vol. Part F12).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Compression creep at 240°C of extruded magnesium alloys containing gadolinium
Dieringa, H., Hort, N., Müller, S. & Kainer, K. U., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 270-273 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Compressive strength and hot deformation behavior of TX32 magnesium alloy with 0.4% Al and 0.4% Si additions
Rao, K. P., Prasad, Y. V. R. K., Suresh, K., Dharmendra, C., Hort, N. & Kainer, K. U., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 169-174 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Correlation between mechanical behaviour and microstructure in the Mg-Ca-Si-Sr system for degradable biomaterials based on thermodynamic calculations
Gil-Santos, A., Szakacs, G., Moelans, N., Hort, N. & Van Der Biest, O., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 431-436 6 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Corrosion and creep resistance of Thixomolded® magnesium alloys
Buzolin, R., Dieringa, H., Blawert, C., Frank, H., Mendis, C. L., Lohmüller, A., Kainer, K. U. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 381-389 9 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Corrosion behavior and microstructure of a broad range of Mg-Sn-X alloys
Abu Leil, T., Rao, K. P., Hort, N. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 281-286 6 p. (Magnesium Technology; vol. 2006).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Corrosion behavior of As-Cast binary Mg-Dy alloys
Yang, L., Feyerabend, F., Kainer, K. U., Willumeit, R. & Hort, N., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 417-421 5 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Crack propagation under bending in cast MglOGdxNd-T4 alloys
Maier, P., Mendis, C., Wolff, M. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 77-82 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Creep and hot working behavior of a new magnesium alloy Mg-3Sn-2Ca
Hort, N., Rao, K. P., Abu Leu, T., Dieringa, H., Prasad, V. Y. R. K. & Kainer, K. U., 2008, Magnesium Technology 2008: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals and Materials. Pekguleryuz, M. O., Neelameggham, N. R., Beals, R. S. & Nyberg, E. A. (eds.). The Minerals, Metals & Materials Society, p. 401-406 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Cyclic deformation of newly developed magnesium cast alloys in corrosive environment
Maier, P., Anopuo, O., Malchau, F., Wienck, G. & Hort, N., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Rainer, K. U. (eds.). Trans Tech Publications Ltd, p. 495-498 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Deformation microstructures and textures of cast Mg-3Sn-2Ca alloy under uniaxial hot compression
Dharmendra, C., Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2012, Mechanical Engineering and Materials: ICMEM 2012. Jin, W. (ed.). Scientific.Net , p. 322-325 4 p. (Applied Mechanics and Materials; vol. 152-154).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Development of a magnesium recycling alloy based on AM50
Fechner, D., Maier, P., Hort, N. & Kainer, K. U., 15.03.2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 ed. Trans Tech Publications Ltd, p. 108-113 6 p. (Materials Science Forum; vol. 539-543, no. PART 1).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Development of a magnesium recycling alloy based on the AM alloy system
Fechner, D., Hort, N., Blawert, C. & Kainer, K. U., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleyuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 287-292 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Development of recyclable Mg-based alloys: Az91d and Azc1231 phase information derived from heating/cooling curve analysis
Gesing, A. J., Reade, N. D., Sokolowski, J. H., Blawert, C., Fechner, D. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 97-105 9 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of Alloying with Rare-Earth Metals on the Degradation of Magnesium Alloys Studied Using a Combination of Isothermal Calorimetry and Pressure Measurements
Wadsö, L., Hort, N. & Orlov, D., 2019, Magnesium Technology 2019. Orlov, D., Joshi, V. V., Neelameggham, N. R. & Jordon, J. B. (eds.). Cham: Springer International Publishing AG, p. 121-126 6 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of grain size and structure, solid solution elements, precipitates and twinning on nanohardness of Mg-Re alloys
Maier, P., Richter, A., Tober, G. & Hort, N., 07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 491-495 5 p. (Materials Science Forum; vol. 765).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of Heat Treatment on the Microstructure and Corrosion Properties of Mg–15Dy–1.5Zn Alloy with LPSO Phase
Jiang, G., Huang, Y., Gavras, S., Shi, H. & Hort, N., 01.01.2024, Magnesium Technology 2024. Leonard, A., Barela, S., Neelameggham, N. R., Miller, V. M. & Tolnai, D. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 7-13 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of heat treatment on the microstructure and creep behavior of Mg-Sn-Ca alloys
Abu Leil, T., Huang, Y., Dieringa, H., Hort, N., Kainer, K. U., Buršík, J., Jirásková, Y. & Rao, K. P., 01.05.2007, Progress in Light Metals, Aerospace Materials and Superconductors. Lu, Y., Zhang, P., Jiang, C. & Han, Y. (eds.). PART 1 ed. Trans Tech Publications Ltd, p. 69-72 4 p. (Materials Science Forum; vol. 546-549, no. PART 1).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of internal defects on tensile properties of A356 casting alloys
Cheng, J., Hort, N., Kainer, K. U. & Kwak, S., 2013, METAL 2013 - 22nd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1171-1176 6 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Effect of LPSO Phases on Crack Propagation in an Extruded Mg–Dy–Nd–Zn–Zr Alloy Influenced by Heat Treatment
Maier, P., Clausius, B., Richter, A., Bittner, B., Hort, N. & Menze, R., 2021, Magnesium 2021 - Proceedings of the 12th International Conference on Magnesium Alloys and their Applications. Luo, A., Pekguleryuz, M., Agnew, S., Allison, J., Kainer, K., Nyberg, E., Poole, W., Sadayappan, K., Williams, B. & Yue, S. (eds.). Springer Science and Business Media Deutschland GmbH, p. 45-55 11 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of minor additions of Al and Si on the mechanical properties of cast Mg-3Sn-2Ca alloys in low temperature range
Rao, K. P., Suresh, K., Hort, N. & Kainer, K. U., 2010, PRICM7. Nie, J-F. & Morton, A. (eds.). Trans Tech Publications Ltd, p. 635-638 4 p. (Materials Science Forum; vol. 654-656).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of Sn additions on the age hardening response, microstructures and corrosion resistance of Mg-0.8Ca (wt%) alloys
Mendis, C. L., Tolnai, D., Blawert, C. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 237-241 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effect of the Zn content on the compression behaviour of Mg5Nd(Zn): An in situ synchrotron radiation diffraction study
Tolnai, D., Kärcher, T., Buzolin, R., Subroto, T., D’Elia, F., Gavras, S., Stark, A., Schell, N., Hort, N. & Kainer, K. U., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 675-681 7 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effects of gadolinium and neodymium addition on young’s modulus of magnesium-based binary alloys
Xu, Y., Li, J., Zhong, Z., Kainer, K. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 341-347 7 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effects of interfacial reactions during solidification on mechanical properties in short fiber reinforced AlSi12CuMgNi composites
Huang, Y., Hort, N., Dieringa, H. & Kainer, K., 2006, Solidification Processing of Metal Matrix Composites - Rohatgi Honorary Symposium. Gupta, N. & Hunt, W. (eds.). John Wiley & Sons Inc., p. 165-172 8 p. (TMS Annual Meeting; vol. 2006).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Effects of Mn and Zn solutes on grain refinement of commercial pure magnesium
Gu, J., Huang, Y., Zhang, M., Kainer, K. U. & Hort, N., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer International Publishing AG, p. 191-198 8 p. (Minerals, Metals and Materials Series; vol. Part F8).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Electrical Resistivity of Binary Mg Alloys
Zhang, X., Huang, Y., Kodetová, V., Vlach, M. & Hort, N., 2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 43-49 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Elevated temperature and varied load response of AS41 at bolted joint
Anopuo, O., Shen, G., Xu, S., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Dargusch, M. S. & Keay, S. M. (eds.). Scientific.Net , p. 509-514 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling
Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Dharmendra, C. & Hort, N., 2019, Magnesium Technology 2019. Neelameggham, N. R., Joshi, V. V., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 313-318 6 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Grain refinement of Mg-Al alloys by carbon inoculation
Huang, Y., Zheng, X., Liu, B., Anopuo, O., Hort, N., Kainer, K. U. & Kim, G. S., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 419-424 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
High temperature deformation mechanisms and processing map for hot working of cast-homogenized Mg-3Sn-2Ca alloy
Rao, K. P., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 2010, THERMEC 2009. Chandra, T., Wanderka, N., Reimers, W. & Ionescu, M. (eds.). Trans Tech Publications Ltd, p. 3616-3621 6 p. (Materials Science Forum; vol. 638-642).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
High temperature deformation of cast ZW11 magnesium alloy with very large grain size
Rao, K. P., Bagheripoor, M., Dieringa, H. & Hort, N., 2017, Advances in Engineering Plasticity and its Application XIII. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications Ltd, p. 232-237 6 p. (Key Engineering Materials; vol. 725 KEM).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
High temperature deformation of magnesium alloy TX32-0.4Al-0.8Si
Dharmendra, C., Rao, K. P., Hort, N. & Kainer, K. U., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 41-45 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Hot forging behavior of Mg−8Al−4Ba−4Ca (ABaX844) alloy and validation of processing map
Rao, K. P., Dharmendra, C., Prasad, Y. V. R. K., Dieringa, H. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 289-296 8 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Hot forging of cast magnesium alloy TX31 using semi-closed die and its finite element simulation
Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Hort, N. & Kainer, K. U., 05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 449-454 6 p. (Materials Science Forum; vol. 783-786).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Hot rolling and deep drawing of AM50 sheet
Göken, J., Hort, N., Blawert, C., Steinhoff, K. & Kainer, K. U., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 205-210 6 p. (Magnesium Technology; vol. 2006).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Hot tearing susceptibility of Mg-5Nd-xZn alloys
D'Elia, F., Tolnai, D., Mendis, C. L. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 129-134 6 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influence of cerium on stress corrosion cracking in AZ91D
Heilig, M., Zander, D., Olson, D., Mishra, B., Hort, N., Klaus, G., Buehrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 305-309 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influence of cerium on the formation of micro-galvanic corrosion elements of AZ91
Zander, D., Heilig, M., Hort, N., Klaus, G., B̈hrig-Polaczek, A., Gröbner, J. & Schmid-Fetzer, R., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 381-384 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influence of Nd in extruded Mg10Gd base alloys on fatigue strength
Maier, P., Tober, G., Mendis, C. L., Müller, S. & Hort, N., 23.05.2014, THERMEC 2013. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 419-424 6 p. (Materials Science Forum; vol. 783-786).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influence of processing route on the properties of magnesium alloys
Frank, H., Hort, N., Dieringa, H. & Kainer, K. U., 2008, Semi-Solid Processing of Alloys and Composites X - Selected: peer reviewed papers from the 10th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2008. Trans Tech Publications Ltd, p. 43-48 6 p. (Solid State Phenomena; vol. 141-143).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influence of strontium, silicon and calcium additions on the properties of the AM50 alloy
Fechner, D., Blawert, C., Hort, N. & Kainer, K. U., 2009, 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance. Dargusch, M. S. & Keay, S. M. (eds.). Trans Tech Publications Ltd, p. 459-462 4 p. (Materials Science Forum; vol. 618 619).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn Alloys
Huang, Y., Gu, J., You, S., Kainer, K. U. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 331-338 8 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influences of Y additions on the hot tearing susceptibility of Mg-1.5wt.%Zn alloys
Wang, Z., Huang, Y. D., Srinivasan, A., Liu, Z., Kainer, K. U. & Hort, N., 01.07.2013, Light Metals Technology 2013. Stone, I., McKay, B. & Fan, Z. (eds.). Trans Tech Publications Ltd, p. 306-310 5 p. (Materials Science Forum; vol. 765).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influences of yttrium content on microstructure and mechanical properties of as-cast Mg–Ca–Y–Zr alloys
You, S., Huang, Y., Kainer, K. U. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 91-97 7 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In situ studies of light metals with synchrotron radiation and neutrons
Staron, P., Beckmann, F., Lippmann, T., Stark, A., Oehring, M., Pyczak, F., Salgado, M., Hort, N., Eckerlebe, H., Kainer, K. U., Müller, M. & Schreyer, A., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 192-197 6 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In situ synchrotron diffraction of the solidification of Mg-RE alloys
Tolnai, D., Mendis, C. L., Stark, A., Szakács, G., Wiese, B., Kainer, K. U. & Hort, N., 2013, Magnesium Technology 2013 - Held During the TMS 2013 Annual Meeting and Exhibition. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). The Minerals, Metals & Materials Society, p. 253-257 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In situ synchrotron radiation diffraction during melting and solidification of Mg-Al alloys containing CaO
Wiese, B., Mendis, C. L., Tolnai, D., Szakacs, G., Stark, A., Schell, N., Reichel, H. P., Bruckner, R., Kainer, K. U. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 191-195 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In situ synchrotron radiation diffraction during solidification of Mg4Y and Mg4YxGd alloys (x - 1, 4 wt.%)
Szakacs, G., Wiese, B., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Naira, M., Kainer, K. U. & Hort, N., 2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 213-218 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In situ synchrotron radiation diffraction during solidification of Mgl5Gd: Effect of cooling rate
Szakács, G., Mendis, C. L., Tolnai, D., Stark, A., Schell, N., Ovri, H., Wolff, M., Kainer, K. U., Grobner, J., Schmid-Fetzer, R. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 79-84 6 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
In Situ Synchrotron Radiation Study of the Tension–Compression Asymmetry in an Extruded Mg–2Y–1Zn–1Mn Alloy
Tolnai, D., Gavras, S., Stark, A., Bartosch, M., Witte, F. & Hort, N., 01.01.2022, Magnesium Technology 2022. Maier, P., Barela, S., Miller, V. M. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 143-148 6 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In situ tensile texture analysis of a new Mg-RE alloy
Gan, W. M., Huang, Y. D., Xu, Y. L., Hofmann, M., Kainer, K. U. & Hort, N., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Trans Tech Publications Ltd, p. 779-783 5 p. (Materials Science Forum; vol. 879).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Intermetallic phase characteristics in the Mg–Nd–Zn system
Tolnai, D., Hill, S. A., Gavras, S., Subroto, T., Buzolin, R. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 391-397 7 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigation and Modelling of the Influence of Cooling Rates on the Microstructure of AZ91 Alloys
Gavras, S., Bilal, M. U., Tolnai, D. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 281-287 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigation of compression behavior of Mg-4Zn-2(Nd, Gd)-0.5Zr at 350°C by in situ synchrotron radiation diffraction
Buzolin, R. H., Tolnai, D., Mendis, C. L., Stark, A., Schell, N., Pinto, H., Kainer, K. U. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 103-107 5 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigation on the Microstructure and Mechanical Properties of Mg–Gd–Nd Ternary Alloys
Xu, Y., Yang, L., Liu, W., Sun, J., Xiao, L., Jiang, X. & Hort, N., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Cham: Springer Schweiz, p. 79-85 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigations in the magnesium-tin system
Bowles, A. L., Dieringa, H., Blawert, C., Hort, N. & Kainer, K. U., 15.07.2005, Magnesium - Science, Technology and Applications, Mg - Proceedings of the International Conference on Magnesium - Science, Technology and Applications. Ke, W., Han, E. H., Han, Y. F., Kainer, K. U. & Luo, A. A. (eds.). Trans Tech Publications Ltd, p. 135-138 4 p. (Materials Science Forum; vol. 488-489).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method
Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 105-110 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method
Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Ulrich Kainer, K., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. The Minerals, Metals & Materials Society, p. 105-110 6 p. (TMS Annual Meeting).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigations on hot tearing of Mg-Zn-(Al) alloys
Zhou, L., Huang, Y., Mao, P., Kainer, K. U., Liu, Z. & Hort, N., 2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Nealameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 125-130 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Investigations on microstructure and properties of Mg-Sn-Ca alloys with 3% Al additions
Elsayed, F. R., Leil, T. A., El-Aziz, A. A., Kainer, K. & Hort, N., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 395-400 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
In vitro corrosion and cytocompatibility properties of Mg-2Gd-X(Ag, Ca) alloys
Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2016, Magnesium Technology 2016 - Held During TMS 2016: 145th Annual Meeting and Exhibition. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 347-351 5 p. (Magnesium Technology; vol. 2016-January).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Low cycle fatigue properties of extruded Mg10GdxNd alloys
Tober, G., Maier, P., Müller, S. & Hort, N., 02.2014, Magnesium Technology 2014 - Held During TMS 2014 143rd Annual Meeting and Exhibition. Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 115-120 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Machining of hybrid reinforced Mg-MMCs using abrasive water jetting
Aust, E., Elsäßer, M., Hort, N. & Limberg, W., 2006, Magnesium Technology 2006. Luo, A. A., Neelameggham, N. R. & Beals, R. S. (eds.). The Minerals, Metals & Materials Society, p. 345-349 5 p. (Magnesium Technology; vol. 2006).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Macrostructure evolution in directionally solidified Mg-RE alloys
Salgado-Ordorica, M. A., Punessen, W., Yi, S., Bohlen, J., Kainer, K. U. & Hort, N., 28.02.2011, Magnesium Technology 2011 - Held During TMS 2011 Annual Meeting and Exhibition. Sillekens, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). The Minerals, Metals & Materials Society, p. 113-118 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium alloy containing silver for degradable biomedical implants
Lukáč, F., Vlček, M., Stulíková, I., Smola, B., Kudrnová, H., Vlach, M., Kekule, T., Szakács, G., Hort, N. & Kainer, K. U., 2014, METAL 2014 - 23rd International Conference on Metallurgy and Materials, Conference Proceedings. TANGER Ltd., p. 1086-1091 6 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium-based metal matrix nanocomposites—processing and properties
Dieringa, H. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 679-691 13 p. (Minerals, Metals and Materials Series; vol. Part F12).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium melt protection
Hort, N., Wiese, B., Dieringa, H. & Kainer, K. U., 2015, Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Trans Tech Publications Ltd, p. 78-81 4 p. (Materials Science Forum; vol. 828-829).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium permanent mold Castings optimization
Elsayed, F. R., Hort, N., Salgado-Ordorica, M. A. & Kainer, K., 06.2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 65-68 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium pistons in engines: Fiction or fact?
Hort, N., Dieringa, H. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 349-353 5 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium recycling system prepared by permanent mould- and high pressure die casting
Fechner, D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). John Wiley & Sons Inc., p. 111-116 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Mechanical and corrosion properties of as-cast and extruded MG10GD alloy for biomedical application
Maier, P., Müller, S., Dieringa, H. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S., Sillekens, W. & Neelameggham, N. (eds.). The Minerals, Metals & Materials Society, p. 253-259 7 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Mechanical and corrosive properties of two magnesium wires: Mg4Gd and Mg6Ag
Maier, P., Szakács, G., Wala, M. & Hort, N., 2015, Magnesium Technology 2015 - Held During TMS 2015 144th Annual Meeting and Exhibition. Manuel, M. V., Singh, A., Alderman, M., Alderman, M. & Neelameggham, N. R. (eds.). The Minerals, Metals & Materials Society, p. 393-398 6 p. (Magnesium Technology; vol. 01/2015).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Mechanical behaviour and corrosion performance of thin film magnesium WE alloys
Schlüter, K., Reverey, J., Hort, N., Zamponi, C. & Quandt, E., 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications Ltd, p. 286-289 4 p. (Materials Science Forum; vol. 690).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Mechanical properties and microstructures of nano SiC reinforced ZE10 composites prepared with ultrasonic vibration
Song, J. F., Dieringa, H., Huang, Y. D., Gan, W. M., Kainer, K. U. & Hort, N., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1019).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Metallography of Mg Alloys
Hort, N., Floss, V., Gavras, S., Wiese, G. & Tolnai, D., 2019, Magnesium Technology 2019. Neelameggham, N. R., Jordon, J. B., Joshi, V. V. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 267-276 10 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Metastable–Stable
Hort, N., 02.2023, Magnesium Technology 2023. Barela, S., Leonard, A., Maier, P., Neelameggham, N. R. & Miller, V. M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 11-13 3 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Mg alloys: Challenges and achievements in controlling performance, and future application perspectives
Dieringa, H., Hort, N., Letzig, D., Bohlen, J., Höche, D., Blawert, C., Zheludkevich, M. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 3-14 12 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructural and mechanical aspects of reinforcement welds for lightweight components produced by friction hydro pillar processing
Pinheiro, G., Santos, J. D., Hort, N. & Kainer, K. U., 2009, Magnesium Technology 2009: Proceedings of a Symposium Sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals. Nyberg, E. A., Agnew, S. R., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 191-196 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructural approaches of engineering materials: Influences of Dy content and heat treatments on the formation of hydrides in Mg-Dy alloys
Huang, Y., Yang, L., Wang, Z., Kainer, K. U. & Hort, N., 2013, Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013. University of Patras, p. 971-980 10 p. (Engineering Against Failure - Proceedings of the 3rd International Conference of Engineering Against Failure, ICEAF 2013).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructural development in tension and compression creep of magnesium alloy AE42
Dieringa, H., Bowles, A., Hort, N. & Kainer, K. U., 15.04.2005, Materials Structure and Micromechanics of Fracture IV, MSMF-4 - Proceedings of the Fourth International Conference on Materials Structure and Micromechanics of Fracture. Pokluda, J. (ed.). Trans Tech Publications Ltd, p. 271-274 4 p. (Materials Science Forum; vol. 482).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructural investigations of MG-AL alloys containing small amount of SiC nucleants
Huang, Y., Hort, N., Anopuo, O., Kainer, K. U., Vidrich, G., Schiffl, A. & Liu, Y., 2007, Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Beals, R. S., Luo, A. A., Neelameggham, N. R. & Pekguleryuz, M. O. (eds.). The Minerals, Metals & Materials Society, p. 421-426 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructural investigations of the Mg-Sn and Mg-Sn-Al alloy systems
Bewies, A. L., Blawert, C., Hort, N. & Kainer, K. U., 2004, Magnesium Technology 2004. Luo, A. A. (ed.). The Minerals, Metals & Materials Society, p. 307-310 4 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and compression creep strength of the newly developed magnesium alloy DieMag422
Dieringa, H., Hort, N. & Kainer, K. U., 2014, AMI Light Metals Conference 2014. Curle, U. A. & Möller, H. (eds.). Trans Tech Publications Ltd, p. 177-183 7 p. (Advanced Materials Research; vol. 1019).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and corrosion of AZ91 with small amounts of cerium
Zander, D., Heilig, M., Hort, N., Klaus, G., Buehrig-Polaczek, A., Grbbner, J. & Schmid-Fetzer, R., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. Agnew, S. R., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). John Wiley & Sons Inc., p. 187-191 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and creep properties of MEZ magnesium alloy processed by thixocasting
Morales Garza, E. D., Dieringa, H., Hort, N. & Kainer, K. U., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). Cham: Springer Schweiz, p. 385-389 5 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
- Published
Microstructure and Fracture Toughness of an Extruded Mg-Dy-Nd-Zn-Zr Alloy Influenced by Heat Treatment
Maier, P., Clausius, B., Joy, C., Menze, R., Bittner, B. & Hort, N., 2021, Magnesium Technology 2021. Miller, V. M., Maier, P., Jordon, J. B. & Neelameggham, N. R. (eds.). Cham: Springer Science and Business Media Deutschland GmbH, p. 19-26 8 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce
Mert, F., Özdemir, A., Kainer, K. U. & Hort, N., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). The Minerals, Metals & Materials Society, p. 149-154 6 p. (Magnesium Technology).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review