Permeability and fabric compaction in forming of fiber metal laminates

Publikation: Beiträge in ZeitschriftenZeitschriftenaufsätzeForschungbegutachtet

Standard

Permeability and fabric compaction in forming of fiber metal laminates. / Kruse, Moritz; Poppe, Christian T.; Henning, Frank et al.
in: Journal of Composite Materials, Jahrgang 57, Nr. 16, 07.2023, S. 2593-2608.

Publikation: Beiträge in ZeitschriftenZeitschriftenaufsätzeForschungbegutachtet

Harvard

APA

Vancouver

Kruse M, Poppe CT, Henning F, Ben Khalifa N. Permeability and fabric compaction in forming of fiber metal laminates. Journal of Composite Materials. 2023 Jul;57(16):2593-2608. Epub 2023 Mai 16. doi: 10.1177/00219983231175725

Bibtex

@article{01396185462b4d3f9368f07785d547b0,
title = "Permeability and fabric compaction in forming of fiber metal laminates",
abstract = "Significant fluid-structure interaction is present in fiber metal laminate forming with a low viscous matrix. A modular, process-inspired test setup is presented for one-dimensional saturated and unsaturated infiltration experiments for fiber metal laminates. Permeability measurements for different fabric orientations, fabric layers, and fiber volume contents show low scatter and good repeatability for fiber volume contents up to 65%. Fiber metal laminate specimens were formed by exchanging the mid-segment of the test setup with a punch and die. The stiffness differences between metal and fabric lead to remarkably high compactions in the bending radii, significantly reducing the flow during infiltration. Contrary to resin transfer molding processes, no formation of resin-rich zones along bending edges occurs due to the high normal pressures from metal forming. A numerical forming simulation was developed to predict the local fiber volume content. Comparing the experimental results with the numerical simulation shows that the high fiber volume content in the radii almost exclusively impacts the overall permeability. Implications for fiber metal laminate processing and modeling are outlined.",
keywords = "Engineering, Permeability, Fabrics/textiles, Fiber metal laminates, Fluid-Structure Interaction, Compaction, Forming, Finite-element-analysis, Liquid composite molding, In-situ hybridization",
author = "Moritz Kruse and Poppe, {Christian T.} and Frank Henning and {Ben Khalifa}, Noomane",
note = "Publisher Copyright: {\textcopyright} The Author(s) 2023.",
year = "2023",
month = jul,
doi = "10.1177/00219983231175725",
language = "English",
volume = "57",
pages = "2593--2608",
journal = "Journal of Composite Materials",
issn = "0021-9983",
publisher = "SAGE Publications Inc.",
number = "16",

}

RIS

TY - JOUR

T1 - Permeability and fabric compaction in forming of fiber metal laminates

AU - Kruse, Moritz

AU - Poppe, Christian T.

AU - Henning, Frank

AU - Ben Khalifa, Noomane

N1 - Publisher Copyright: © The Author(s) 2023.

PY - 2023/7

Y1 - 2023/7

N2 - Significant fluid-structure interaction is present in fiber metal laminate forming with a low viscous matrix. A modular, process-inspired test setup is presented for one-dimensional saturated and unsaturated infiltration experiments for fiber metal laminates. Permeability measurements for different fabric orientations, fabric layers, and fiber volume contents show low scatter and good repeatability for fiber volume contents up to 65%. Fiber metal laminate specimens were formed by exchanging the mid-segment of the test setup with a punch and die. The stiffness differences between metal and fabric lead to remarkably high compactions in the bending radii, significantly reducing the flow during infiltration. Contrary to resin transfer molding processes, no formation of resin-rich zones along bending edges occurs due to the high normal pressures from metal forming. A numerical forming simulation was developed to predict the local fiber volume content. Comparing the experimental results with the numerical simulation shows that the high fiber volume content in the radii almost exclusively impacts the overall permeability. Implications for fiber metal laminate processing and modeling are outlined.

AB - Significant fluid-structure interaction is present in fiber metal laminate forming with a low viscous matrix. A modular, process-inspired test setup is presented for one-dimensional saturated and unsaturated infiltration experiments for fiber metal laminates. Permeability measurements for different fabric orientations, fabric layers, and fiber volume contents show low scatter and good repeatability for fiber volume contents up to 65%. Fiber metal laminate specimens were formed by exchanging the mid-segment of the test setup with a punch and die. The stiffness differences between metal and fabric lead to remarkably high compactions in the bending radii, significantly reducing the flow during infiltration. Contrary to resin transfer molding processes, no formation of resin-rich zones along bending edges occurs due to the high normal pressures from metal forming. A numerical forming simulation was developed to predict the local fiber volume content. Comparing the experimental results with the numerical simulation shows that the high fiber volume content in the radii almost exclusively impacts the overall permeability. Implications for fiber metal laminate processing and modeling are outlined.

KW - Engineering

KW - Permeability

KW - Fabrics/textiles

KW - Fiber metal laminates

KW - Fluid-Structure Interaction

KW - Compaction

KW - Forming

KW - Finite-element-analysis

KW - Liquid composite molding

KW - In-situ hybridization

UR - http://www.scopus.com/inward/record.url?scp=85159702493&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/fe09bc1f-6f71-37de-a048-3732ffa94687/

U2 - 10.1177/00219983231175725

DO - 10.1177/00219983231175725

M3 - Journal articles

VL - 57

SP - 2593

EP - 2608

JO - Journal of Composite Materials

JF - Journal of Composite Materials

SN - 0021-9983

IS - 16

ER -

DOI