Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires
Research output: Journal contributions › Journal articles › Research › peer-review
Standard
Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires. / Maier, P.; Zimmermann, F.; Rinne, M. et al.
In: Materials and Corrosion, Vol. 69, No. 2, 01.02.2018, p. 178-190.Research output: Journal contributions › Journal articles › Research › peer-review
Harvard
APA
Vancouver
Bibtex
}
RIS
TY - JOUR
T1 - Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires
AU - Maier, P.
AU - Zimmermann, F.
AU - Rinne, M.
AU - Szakács, G.
AU - Hort, N.
AU - Vogt, C.
PY - 2018/2/1
Y1 - 2018/2/1
N2 - A warm-drawn Mg6Ag wire with a diameter of 1.6 mm is investigated by immersion tests in Ringer solution in two conditions: as-drawn and solution heat-treated wire. The initial as-drawn condition showed higher strength in comparison to the solution heat-treated one. As-drawn wire has heavily twinned grains. Heat treatment causes slight grain growth, but less microgalvanic corrosion due to dissolved second phases and a significantly reduction of twin boundaries. The mean corrosion rate decreases by more than half by the heat treatment resulting in higher remaining mechanical properties. The mean corrosion rate also decreases with corrosion time, slightly more for the heat-treated condition. Pitting corrosion was still present after solution heat treatment, although the pit shape is less harmful. The corroded wires and corrosion products were analysed qualitatively and quantitatively by SEM imaging and ICP-OES with focus on the exposure time. Mg6Ag wires corrode under forming Mg(OH)2, CaCO3 and AgCl, SEM imaging proves higher corrosion resistance of heat-treated Mg6Ag. Chemical analysis of wires, corrosion products and corrosion media offer to describe the time-dependent mechanism.
AB - A warm-drawn Mg6Ag wire with a diameter of 1.6 mm is investigated by immersion tests in Ringer solution in two conditions: as-drawn and solution heat-treated wire. The initial as-drawn condition showed higher strength in comparison to the solution heat-treated one. As-drawn wire has heavily twinned grains. Heat treatment causes slight grain growth, but less microgalvanic corrosion due to dissolved second phases and a significantly reduction of twin boundaries. The mean corrosion rate decreases by more than half by the heat treatment resulting in higher remaining mechanical properties. The mean corrosion rate also decreases with corrosion time, slightly more for the heat-treated condition. Pitting corrosion was still present after solution heat treatment, although the pit shape is less harmful. The corroded wires and corrosion products were analysed qualitatively and quantitatively by SEM imaging and ICP-OES with focus on the exposure time. Mg6Ag wires corrode under forming Mg(OH)2, CaCO3 and AgCl, SEM imaging proves higher corrosion resistance of heat-treated Mg6Ag. Chemical analysis of wires, corrosion products and corrosion media offer to describe the time-dependent mechanism.
KW - corrosion
KW - magnesium wire
KW - pitting
KW - silver
KW - solution heat treatment
KW - Engineering
UR - http://www.scopus.com/inward/record.url?scp=85024375985&partnerID=8YFLogxK
U2 - 10.1002/maco.201709502
DO - 10.1002/maco.201709502
M3 - Journal articles
AN - SCOPUS:85024375985
VL - 69
SP - 178
EP - 190
JO - Materials and Corrosion - Werkstoffe und Korrosion
JF - Materials and Corrosion - Werkstoffe und Korrosion
SN - 0947-5117
IS - 2
ER -