Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn

Research output: Journal contributionsJournal articlesResearchpeer-review

Standard

Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn. / Zhou, Shibo; Tang, Aitao; Liu, Tingting et al.
In: Journal of Alloys and Compounds, Vol. 947, 169669, 25.06.2023.

Research output: Journal contributionsJournal articlesResearchpeer-review

Harvard

Zhou, S, Tang, A, Liu, T, Huang, Y, Peng, P, Zhang, J, Hort, N, Willumeit-Römer, R & Pan, F 2023, 'Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn', Journal of Alloys and Compounds, vol. 947, 169669. https://doi.org/10.1016/j.jallcom.2023.169669

APA

Zhou, S., Tang, A., Liu, T., Huang, Y., Peng, P., Zhang, J., Hort, N., Willumeit-Römer, R., & Pan, F. (2023). Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn. Journal of Alloys and Compounds, 947, Article 169669. https://doi.org/10.1016/j.jallcom.2023.169669

Vancouver

Zhou S, Tang A, Liu T, Huang Y, Peng P, Zhang J et al. Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn. Journal of Alloys and Compounds. 2023 Jun 25;947:169669. doi: 10.1016/j.jallcom.2023.169669

Bibtex

@article{3c5ed7a0da0e46aeb1d749ae41d729b6,
title = "Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn",
abstract = "This work systematically investigated the influence of the micro-Mn addition on the microstructures and mechanical properties of Mg-Er alloys. To investigate their deformation mechanisms during tensile testing, electron back-scattered diffraction, transmission electron microscopy, slip trace analysis, and visco-plastic self-consistent polycrystal constitutive (VPSC) modeling were used. The study showed that the as-solid solution samples only consist of the α-Mg phase. All samples exhibit a complete dynamic recrystallized (DRXed) microstructure with an average grain size of 2.79 µm after hot extrusion. The ductility first increases from 26.02 % to 35.34 % and then remains unchanged with the increment of Mn content. Meanwhile, the yield strength significantly increases from 95 MPa to 200 MPa. According to VPSC results, the initial slip resistance (τ0) difference between prismatic and basal slips decreases from 109 MPa to 92 MPa and τ0 between pyramidal and basal slip systems from 129 MPa to 112 MPa. Both the VPSC and two-beam diffraction results confirmed that pyramidalslip andslip were activated during tensile deformation. The quantitative analysis of the slip trace line verified that the volume of non-basal slip reached 65 % when the content of Mn was increased to 0.9 wt%. Mn in solid solution increased the activity of pyramidaland prismaticdislocations during deformation, which is beneficial for accommodating c-axis strain. Consequently, the ambient ductility of Mg-2Er alloy with Mn addition is improved.",
keywords = "Magnesium alloy, Deformation mechanisms, Ductility, <c+a>dislocation, Critical shear stress, Engineering",
author = "Shibo Zhou and Aitao Tang and Tingting Liu and Yuanding Huang and Peng Peng and Jianyue Zhang and Norbert Hort and Regine Willumeit-R{\"o}mer and Fusheng Pan",
note = "Publisher Copyright: {\textcopyright} 2023 Elsevier B.V.",
year = "2023",
month = jun,
day = "25",
doi = "10.1016/j.jallcom.2023.169669",
language = "English",
volume = "947",
journal = "Journal of Alloys and Compounds",
issn = "0925-8388",
publisher = "Elsevier B.V.",

}

RIS

TY - JOUR

T1 - Development of high strength-ductility Mg-Er extruded alloys by micro-alloying with Mn

AU - Zhou, Shibo

AU - Tang, Aitao

AU - Liu, Tingting

AU - Huang, Yuanding

AU - Peng, Peng

AU - Zhang, Jianyue

AU - Hort, Norbert

AU - Willumeit-Römer, Regine

AU - Pan, Fusheng

N1 - Publisher Copyright: © 2023 Elsevier B.V.

PY - 2023/6/25

Y1 - 2023/6/25

N2 - This work systematically investigated the influence of the micro-Mn addition on the microstructures and mechanical properties of Mg-Er alloys. To investigate their deformation mechanisms during tensile testing, electron back-scattered diffraction, transmission electron microscopy, slip trace analysis, and visco-plastic self-consistent polycrystal constitutive (VPSC) modeling were used. The study showed that the as-solid solution samples only consist of the α-Mg phase. All samples exhibit a complete dynamic recrystallized (DRXed) microstructure with an average grain size of 2.79 µm after hot extrusion. The ductility first increases from 26.02 % to 35.34 % and then remains unchanged with the increment of Mn content. Meanwhile, the yield strength significantly increases from 95 MPa to 200 MPa. According to VPSC results, the initial slip resistance (τ0) difference between prismatic and basal slips decreases from 109 MPa to 92 MPa and τ0 between pyramidal and basal slip systems from 129 MPa to 112 MPa. Both the VPSC and two-beam diffraction results confirmed that pyramidalslip andslip were activated during tensile deformation. The quantitative analysis of the slip trace line verified that the volume of non-basal slip reached 65 % when the content of Mn was increased to 0.9 wt%. Mn in solid solution increased the activity of pyramidaland prismaticdislocations during deformation, which is beneficial for accommodating c-axis strain. Consequently, the ambient ductility of Mg-2Er alloy with Mn addition is improved.

AB - This work systematically investigated the influence of the micro-Mn addition on the microstructures and mechanical properties of Mg-Er alloys. To investigate their deformation mechanisms during tensile testing, electron back-scattered diffraction, transmission electron microscopy, slip trace analysis, and visco-plastic self-consistent polycrystal constitutive (VPSC) modeling were used. The study showed that the as-solid solution samples only consist of the α-Mg phase. All samples exhibit a complete dynamic recrystallized (DRXed) microstructure with an average grain size of 2.79 µm after hot extrusion. The ductility first increases from 26.02 % to 35.34 % and then remains unchanged with the increment of Mn content. Meanwhile, the yield strength significantly increases from 95 MPa to 200 MPa. According to VPSC results, the initial slip resistance (τ0) difference between prismatic and basal slips decreases from 109 MPa to 92 MPa and τ0 between pyramidal and basal slip systems from 129 MPa to 112 MPa. Both the VPSC and two-beam diffraction results confirmed that pyramidalslip andslip were activated during tensile deformation. The quantitative analysis of the slip trace line verified that the volume of non-basal slip reached 65 % when the content of Mn was increased to 0.9 wt%. Mn in solid solution increased the activity of pyramidaland prismaticdislocations during deformation, which is beneficial for accommodating c-axis strain. Consequently, the ambient ductility of Mg-2Er alloy with Mn addition is improved.

KW - Magnesium alloy

KW - Deformation mechanisms

KW - Ductility

KW - <c+a>dislocation

KW - Critical shear stress

KW - Engineering

UR - http://www.scopus.com/inward/record.url?scp=85150065138&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/14b9065d-9c76-3488-8af0-277af5589d04/

U2 - 10.1016/j.jallcom.2023.169669

DO - 10.1016/j.jallcom.2023.169669

M3 - Journal articles

VL - 947

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

SN - 0925-8388

M1 - 169669

ER -