Norbert Hort
Prof. Dr.
Contact
Prof. Dr. Norbert Hort
- Engineering
Research areas
Achieving enhanced mechanical properties in Mg-Gd-Y-Zn-Mn alloy by altering dynamic recrystallization behavior via pre-ageing treatment
Wang, K., Dou, X., Wang, J., Huang, Y., Gavras, S., Hort, N., Liu, S., Hu, H., Wang, J. & Pan, F., 14.07.2020, In: Materials Science and Engineering A. 790, 139635.Research output: Journal contributions › Journal articles › Research › peer-review
Biodegradable Materials for Medical Applications II
Drelich, J. W., Sikora-Jasinska, M., Mostaed, E., Liu, H., Maier, P., Seitz, J. M. & Hort, N., 01.05.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 5, p. 1830-1832 3 p.Research output: Journal contributions › Journal articles › Research › peer-review
Influence of Solution Heat Treatment on the Microstructure, Hardness and Stress Corrosion Behavior of Extruded Resoloy®
Maier, P., Steinacker, A., Clausius, B. & Hort, N., 01.05.2020, In: JOM: Journal of The Minerals, Metals & Materials Society. 72, 5, p. 1870-1879 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Microstructure and mechanical properties of large-scale Mg-Gd-Y-Zn-Mn alloys prepared through semi-continuous casting
Wang, K., Wang, J., Dou, X., Huang, Y., Hort, N., Gavras, S., Liu, S., Cai, Y., Wang, J. & Pan, F., 01.09.2020, In: Journal of Materials Science and Technology. 52, p. 72-82 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
Microstructural, mechanical and corrosion characterization of an as-cast Mg–3Zn–0.4Ca alloy for biomedical applications
Pulido-González, N., Torres, B., Rodrigo, P., Hort, N. & Rams, J., 01.06.2020, In: Journal of Magnesium and Alloys. 8, 2, p. 510-522 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Characterization of an extruded Mg-Dy-Nd alloy during stress corrosion with C-ring tests
Maier, P., Clausius, B., Wicke, J. & Hort, N., 05.2020, In: Metals. 10, 5, 16 p., 584.Research output: Journal contributions › Journal articles › Research › peer-review
Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates
Yu, J., Song, B., Xia, D., Zeng, X., Huang, Y., Hort, N., Mao, P. & Liu, Z., 01.09.2020, In: Journal of Magnesium and Alloys. 8, 3, p. 849-859 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature
Xia, D., Zhang, J., Chen, X., Huang, G., Jiang, B., Tang, A., Gavras, S., Huang, Y., Hort, N. & Pan, F., 03.07.2020, In: Materials Science and Engineering A. 789, 139599.Research output: Journal contributions › Journal articles › Research › peer-review
Effects of Intermetallic Microstructure on Degradation of Mg-5Nd Alloy
Zhang, Y., Huang, Y., Feyerabend, F., Gavras, S., Xu, Y., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 01.10.2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 10, p. 5498-5515 18 p.Research output: Journal contributions › Journal articles › Research › peer-review
Predicting the interfacial heat transfer coefficient of cast Mg-Al alloys using Beck's inverse analysis
Bilal, M. U. & Hort, N., 12.06.2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 8 p., 012027.Research output: Journal contributions › Conference article in journal › Research › peer-review
In vivo assessment of biodegradable magnesium alloy ureteral stents in a pig model
Tie, D., Liu, H., Guan, R., Holt-Torres, P., Liu, Y., Wang, Y. & Hort, N., 15.10.2020, In: Acta Biomaterialia. 116, p. 415-425 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
Magnesium alloys for biomedical applications
Maier, P. & Hort, N., 05.10.2020, In: Metals. 10, 10, p. 1-3 3 p., 1328.Research output: Journal contributions › Other (editorial matter etc.) › Research
Restoration mechanisms at moderate temperatures for As-Cast ZK40 magnesium alloys modified with individual Ca and Gd additions
Buzolin, R. H., Guimaraes, L. H. M., Díaz, J. A. Á., Silva, E. P. D., Tolnai, D., Mendis, C. L., Hort, N. & Pinto, H. C., 16.12.2020, In: Crystals. 10, 12, p. 1-22 22 p., 1140.Research output: Journal contributions › Journal articles › Research › peer-review
Microstructures and mechanical properties of a hot-extruded Mg−8Gd−3Yb−1.2Zn−0.5Zr (wt%) alloy
Li, B., Guan, K., Yang, Q., Niu, X., Zhang, D., Lv, S., Meng, F., Huang, Y., Hort, N. & Meng, J., 05.03.2019, In: Journal of Alloys and Compounds. 776, p. 666-678 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Mechanical and Corrosion Properties of Two Precipitation-Hardened Mg-Y-Nd-Gd-Dy Alloys with Small Changes in Chemical Composition
Maier, P., Lauth, N., Mendis, C. L., Bechly, M. & Hort, N., 15.04.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 4, p. 1426-1435 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effects of samarium content on microstructure and mechanical properties of Mg–0.5Zn–0.5Zr alloy
Guan, K., Meng, F., Qin, P., Yang, Q., Zhang, D., Li, B., Sun, W., Lv, S., Huang, Y., Hort, N. & Meng, J., 07.2019, In: Journal of Materials Science and Technology. 35, 7, p. 1368-1377 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Microscopic deformation compatibility during biaxial tension in AZ31 Mg alloy rolled sheet at room temperature
Xia, D., Huang, G., Liu, S., Tang, A., Gavras, S., Huang, Y., Hort, N., Jiang, B. & Pan, F., 22.05.2019, In: Materials Science and Engineering A. 756, p. 1-10 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling
Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Dharmendra, C. & Hort, N., 2019, Magnesium Technology 2019. Neelameggham, N. R., Joshi, V. V., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 313-318 6 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructures, Corrosion and Mechanical Properties of Mg–Si Alloys as Biodegradable Implant Materials
Wang, W., Gao, M., Huang, Y., Tan, L., Yang, K. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 151-157 7 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influences of SiC Particle Additions on the Grain Refinement of Mg–Zn Alloys
Huang, Y., Gu, J., You, S., Kainer, K. U. & Hort, N., 2019, Magnesium Technology 2019. Joshi, V. V., Neelameggham, N. R., Jordon, J. B. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 331-338 8 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Metallography of Mg Alloys
Hort, N., Floss, V., Gavras, S., Wiese, G. & Tolnai, D., 2019, Magnesium Technology 2019. Neelameggham, N. R., Jordon, J. B., Joshi, V. V. & Orlov, D. (eds.). Cham: Springer International Publishing AG, p. 267-276 10 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Unexpected Expansion Behavior of Mg-Al Alloys During Isothermal Ageing
Zhang, X., Huang, Y., Li, X., Gan, W., Kainer, K. U. & Hort, N., 15.08.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 8, p. 2906-2912 7 p.Research output: Journal contributions › Journal articles › Research › peer-review
Effect of Alloying with Rare-Earth Metals on the Degradation of Magnesium Alloys Studied Using a Combination of Isothermal Calorimetry and Pressure Measurements
Wadsö, L., Hort, N. & Orlov, D., 2019, Magnesium Technology 2019. Orlov, D., Joshi, V. V., Neelameggham, N. R. & Jordon, J. B. (eds.). Cham: Springer International Publishing AG, p. 121-126 6 p. (Minerals, Metals and Materials Series).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Developing a die casting magnesium alloy with excellent mechanical performance by controlling intermetallic phase
Meng, F., Lv, S., Yang, Q., Qin, P., Zhang, J., Guan, K., Huang, Y., Hort, N., Li, B., Liu, X. & Meng, J., 30.07.2019, In: Journal of Alloys and Compounds. 795, p. 436-445 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
The Role of Second Phases on the Creep Behavior of As-Cast and Hot-Extruded Mg-Ca-Zr Alloys
You, S., Huang, Y., Dieringa, H., Maawad, E., Gan, W., Kainer, K. U. & Hort, N., 15.07.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 7, p. 2227-2234 8 p.Research output: Journal contributions › Journal articles › Research › peer-review
Influences of AlN/Al Nanoparticles on the Creep Properties of Elektron21 Prepared by High Shear Dispersion Technology
Yang, H., Huang, Y., Gavras, S., Kainer, K. U., Hort, N. & Dieringa, H., 15.07.2019, In: JOM: Journal of The Minerals, Metals & Materials Society. 71, 7, p. 2245-2252 8 p.Research output: Journal contributions › Journal articles › Research › peer-review
Abnormal extrusion texture and reversed yield asymmetry in a Mg–Y-Sm-Zn-Zr alloy
Lyu, S., Zheng, R., Xiao, W., Huang, Y., Gavras, S., Hort, N., Li, G. & Ma, C., 08.07.2019, In: Materials Science and Engineering A. 760, p. 426-430 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Calculation of Schmid factor in Mg alloys: Influence of stress state
Xia, D., Chen, X., Huang, G., Jiang, B., Tang, A., Yang, H., Gavras, S., Huang, Y., Hort, N. & Pan, F., 10.2019, In: Scripta Materialia. 171, p. 31-35 5 p.Research output: Journal contributions › Journal articles › Research › peer-review
Grain refinements of magnesium alloys inoculated by additions of external SiC particles
Huang, Y., Gu, J., You, S., Ulrich Kainer, K. & Hort, N., 17.06.2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 6 p., 012049.Research output: Journal contributions › Conference article in journal › Research › peer-review
Influence of Torsion on Precipitation and Hardening Effects during Aging of an Extruded AZ91 Alloy
Song, B., Liu, T., Xin, R., Yang, H., Guo, N., Chai, L., Huang, Y. & Hort, N., 15.07.2019, In: Journal of Materials Engineering and Performance. 28, 7, p. 4403-4414 12 p.Research output: Journal contributions › Journal articles › Research › peer-review
Role of Ca on the corrosion resistance of Mg–9Al and Mg–9Al–0.5Mn alloys
Mingo, B., Mohedano, M., Blawert, C., del Olmo, R., Hort, N. & Arrabal, R., 30.11.2019, In: Journal of Alloys and Compounds. 811, 151992.Research output: Journal contributions › Journal articles › Research › peer-review
Stress corrosion of the Mg-Zn-Zr alloy system using C-ring tests
Maier, P., Ostermeier, N., Wicke, J., You, S. & Hort, N., 2019, MS and T 2019 - Materials Science and Technology 2019. Materials Science and Technology (MS&T), p. 1142-1149 8 p.Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
New methods for in vivo degradation testing of future stent materials
Bartosch, M., Peters, H., Koerner, A., Schmitt, B., Berger, F., Hort, N. & Witte, F., 01.02.2018, In: Materials and Corrosion. 69, 2, p. 156-166 11 p.Research output: Journal contributions › Journal articles › Research › peer-review
Solid solution treatment on strength and corrosion of biodegradable Mg6Ag wires
Maier, P., Zimmermann, F., Rinne, M., Szakács, G., Hort, N. & Vogt, C., 01.02.2018, In: Materials and Corrosion. 69, 2, p. 178-190 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Deformation Mechanisms and Formability Window for As-Cast Mg-6Al-2Ca-1Sn-0.3Sr Alloy (MRI 230D)
Suresh, K., Pitcheswara Rao, K., Chalasani, D., Yellapregada Venkata Rama Krishna, P., Hort, N. & Dieringa, H., 01.03.2018, In: Journal of Materials Engineering and Performance. 27, 3, p. 1440-1449 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Mg alloys: Challenges and achievements in controlling performance, and future application perspectives
Dieringa, H., Hort, N., Letzig, D., Bohlen, J., Höche, D., Blawert, C., Zheludkevich, M. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 3-14 12 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Study on Mg–Si–Sr ternary alloys for biomedical applications
Van der Biest, O., Gil-Santos, A., Hort, N., Schmid-Fetzer, R. & Moelans, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 413-424 12 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Intermetallic phase characteristics in the Mg–Nd–Zn system
Tolnai, D., Hill, S. A., Gavras, S., Subroto, T., Buzolin, R. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 391-397 7 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Hot forging behavior of Mg−8Al−4Ba−4Ca (ABaX844) alloy and validation of processing map
Rao, K. P., Dharmendra, C., Prasad, Y. V. R. K., Dieringa, H. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 289-296 8 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Influences of yttrium content on microstructure and mechanical properties of as-cast Mg–Ca–Y–Zr alloys
You, S., Huang, Y., Kainer, K. U. & Hort, N., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 91-97 7 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium pistons in engines: Fiction or fact?
Hort, N., Dieringa, H. & Kainer, K. U., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer International Publishing AG, p. 349-353 5 p. (Minerals, Metals and Materials Series; vol. Part F7).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Magnesium-based metal matrix nanocomposites—processing and properties
Dieringa, H. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 679-691 13 p. (Minerals, Metals and Materials Series; vol. Part F12).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Microstructure and mechanical properties of mg-gd alloys as biodegradable implant materials
Lu, Y., Huang, Y., Feyerabend, F., Willumeit-Römer, R., Kainer, K. U. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 253-262 10 p. (Minerals, Metals and Materials Series; vol. Part F12).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Comparative study on corrosion behavior of we33 in immersion and polarization influenced by heat treatment
Maier, P., Bechly, M., Hess, B., Freese, M. & Hort, N., 2018, TMS 2018 147th Annual Meeting and Exhibition Supplemental Proceedings. Cham: Springer International Publishing AG, p. 227-237 11 p. (Minerals, Metals and Materials Series; vol. Part F12).Research output: Contributions to collected editions/works › Article in conference proceedings › Research › peer-review
Hot deformation behavior and processing map of Mg-3Sn-2Ca-0.4Al-0.4Zn alloy
Dharmendra, C., Rao, K. P., Suresh, K. & Hort, N., 04.2018, In: Metals. 8, 4, 17 p., 216.Research output: Journal contributions › Journal articles › Research › peer-review
Unraveling Recrystallization Mechanisms Governing Texture Development from Rare-Earth Element Additions to Magnesium
Imandoust, A., Barrett, C. D., Al-Samman, T., Tschopp, M. A., Essadiqi, E., Hort, N. & El Kadiri, H., 01.05.2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 5, p. 1809-1829 21 p.Research output: Journal contributions › Journal articles › Research › peer-review
Corrosion behaviour of as-cast ZK40 with CaO and Y additions
BUZOLIN, R. H., MOHEDANO, M., MENDIS, C. L., MINGO, B., TOLNAI, D., BLAWERT, C., KAINER, K. U., PINTO, H. & HORT, N., 03.2018, In: Transactions of Nonferrous Metals Society of China (English Edition). 28, 3, p. 427-439 13 p.Research output: Journal contributions › Journal articles › Research › peer-review
Development and comparison of processing maps of Mg-3Sn-1Ca alloy from data obtained in tension versus compression
Rao, K. P., Suresh, K., Prasad, Y. V. R. K. & Hort, N., 07.02.2018, In: IOP Conference Series: Materials Science and Engineering. 297, 1, 6 p., 012014.Research output: Journal contributions › Conference article in journal › Research › peer-review
Effect of TiBor on the grain refinement and hot tearing susceptibility of AZ91D magnesium alloy
Davis, T. A., Bichler, L., D'Elia, F. & Hort, N., 30.08.2018, In: Journal of Alloys and Compounds. 759, p. 70-79 10 p.Research output: Journal contributions › Journal articles › Research › peer-review
Zum Einfluss des Lösungsglühens und Aushärtens auf die Mikrostruktur von ZK40-Legierungen, modifiziert durch Zugaben von Ca, Gd, Nd und Y
Buzolin, R. H., Mendis, C. L., Tolnai, D., Kainer, K. U., Hort, N., Pereira Da Silva, E. & Cavalcanti Pinto, H., 05.2018, In: Praktische Metallographie/Practical Metallography. 55, 5, p. 268-287 20 p.Research output: Journal contributions › Journal articles › Research › peer-review