Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Standard

Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates. / Kruse, Moritz; Lehmann, Jonas; Ben Khalifa, Noomane.
Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Hrsg. / Mathias Liewald; Alexander Verl; Thomas Bauernhansl; Hans-Christian Möhring. Cham: Springer, 2023. S. 122-130 (Lecture Notes in Production Engineering; Band Part F1163).

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Harvard

Kruse, M, Lehmann, J & Ben Khalifa, N 2023, Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates. in M Liewald, A Verl, T Bauernhansl & H-C Möhring (Hrsg.), Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Lecture Notes in Production Engineering, Bd. Part F1163, Springer, Cham, S. 122-130, Conference - 12th Congress of the German Academic Association for Production Technology (WGP), Stuttgart, Baden-Württemberg, Deutschland, 11.10.22. https://doi.org/10.1007/978-3-031-18318-8_13

APA

Kruse, M., Lehmann, J., & Ben Khalifa, N. (2023). Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates. In M. Liewald, A. Verl, T. Bauernhansl, & H.-C. Möhring (Hrsg.), Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022 (S. 122-130). (Lecture Notes in Production Engineering; Band Part F1163). Springer. https://doi.org/10.1007/978-3-031-18318-8_13

Vancouver

Kruse M, Lehmann J, Ben Khalifa N. Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates. in Liewald M, Verl A, Bauernhansl T, Möhring HC, Hrsg., Production at the Leading Edge of Technology: Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Cham: Springer. 2023. S. 122-130. (Lecture Notes in Production Engineering). doi: 10.1007/978-3-031-18318-8_13

Bibtex

@inbook{941330a041f7447f89a3f6a31605662d,
title = "Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates",
abstract = "A newly developed in-situ-hybridization single-step process for the manufacturing of formed fiber-metal-laminates (FML) was introduced in previous works. During the deep drawing process, the fabric layer is infiltrated with a low-viscous thermoplastic matrix in a resin transfer molding process. The matrix polymerizes after the forming is completed. First parts could be manufactured successfully, but the influence of many process parameters continues to be unknown. The interaction of fiber and metal layer (DC04) on the formability of the FML is experimentally investigated by the deep drawing of FML parts without matrix injection. Parameters tested were the blank holding force, tool lubrication as well as different surface treatments of the metal sheet. Fiber breakage was observed after deep drawing of the dry FML. The deep drawn metal sheets were analyzed by surface strain measurements. The formability was then assessed by comparing the measured surface strains to a forming limit curve obtained by Nakajima-tests of the metal-fiber-metal stack. The results of the parameter investigation during dry deep drawing are analyzed to understand the influence of the process parameters on the in-situ hybridization process containing matrix injection.",
keywords = "Engineering, Deep drawing, Fiber-metal-laminates, Formability",
author = "Moritz Kruse and Jonas Lehmann and {Ben Khalifa}, Noomane",
note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.; Conference - 12th Congress of the German Academic Association for Production Technology (WGP) ; Conference date: 11-10-2022 Through 14-10-2022",
year = "2023",
month = jan,
day = "1",
doi = "10.1007/978-3-031-18318-8_13",
language = "English",
isbn = "978-3-031-18317-1",
series = "Lecture Notes in Production Engineering",
publisher = "Springer",
pages = "122--130",
editor = "Mathias Liewald and Alexander Verl and Thomas Bauernhansl and Hans-Christian M{\"o}hring",
booktitle = "Production at the Leading Edge of Technology",
address = "Germany",
url = "https://link.springer.com/book/10.1007/978-3-031-18318-8",

}

RIS

TY - CHAP

T1 - Parameter Investigation for the In-Situ Hybridization Process by Deep Drawing of Dry Fiber-Metal-Laminates

AU - Kruse, Moritz

AU - Lehmann, Jonas

AU - Ben Khalifa, Noomane

N1 - Conference code: 12

PY - 2023/1/1

Y1 - 2023/1/1

N2 - A newly developed in-situ-hybridization single-step process for the manufacturing of formed fiber-metal-laminates (FML) was introduced in previous works. During the deep drawing process, the fabric layer is infiltrated with a low-viscous thermoplastic matrix in a resin transfer molding process. The matrix polymerizes after the forming is completed. First parts could be manufactured successfully, but the influence of many process parameters continues to be unknown. The interaction of fiber and metal layer (DC04) on the formability of the FML is experimentally investigated by the deep drawing of FML parts without matrix injection. Parameters tested were the blank holding force, tool lubrication as well as different surface treatments of the metal sheet. Fiber breakage was observed after deep drawing of the dry FML. The deep drawn metal sheets were analyzed by surface strain measurements. The formability was then assessed by comparing the measured surface strains to a forming limit curve obtained by Nakajima-tests of the metal-fiber-metal stack. The results of the parameter investigation during dry deep drawing are analyzed to understand the influence of the process parameters on the in-situ hybridization process containing matrix injection.

AB - A newly developed in-situ-hybridization single-step process for the manufacturing of formed fiber-metal-laminates (FML) was introduced in previous works. During the deep drawing process, the fabric layer is infiltrated with a low-viscous thermoplastic matrix in a resin transfer molding process. The matrix polymerizes after the forming is completed. First parts could be manufactured successfully, but the influence of many process parameters continues to be unknown. The interaction of fiber and metal layer (DC04) on the formability of the FML is experimentally investigated by the deep drawing of FML parts without matrix injection. Parameters tested were the blank holding force, tool lubrication as well as different surface treatments of the metal sheet. Fiber breakage was observed after deep drawing of the dry FML. The deep drawn metal sheets were analyzed by surface strain measurements. The formability was then assessed by comparing the measured surface strains to a forming limit curve obtained by Nakajima-tests of the metal-fiber-metal stack. The results of the parameter investigation during dry deep drawing are analyzed to understand the influence of the process parameters on the in-situ hybridization process containing matrix injection.

KW - Engineering

KW - Deep drawing

KW - Fiber-metal-laminates

KW - Formability

UR - https://www.mendeley.com/catalogue/20fea411-3c11-3136-88bd-f5213f84f6a9/

UR - http://www.scopus.com/inward/record.url?scp=85166667357&partnerID=8YFLogxK

U2 - 10.1007/978-3-031-18318-8_13

DO - 10.1007/978-3-031-18318-8_13

M3 - Article in conference proceedings

SN - 978-3-031-18317-1

T3 - Lecture Notes in Production Engineering

SP - 122

EP - 130

BT - Production at the Leading Edge of Technology

A2 - Liewald, Mathias

A2 - Verl, Alexander

A2 - Bauernhansl, Thomas

A2 - Möhring, Hans-Christian

PB - Springer

CY - Cham

T2 - Conference - 12th Congress of the German Academic Association for Production Technology (WGP)

Y2 - 11 October 2022 through 14 October 2022

ER -

DOI

Zuletzt angesehen

Publikationen

  1. Does it pay to be active on many foreign markets? profitability in german multi-market exporters and importers from manufacturing industries
  2. Effect of overlapping audit and compensation committee memberships on the readability of management compensation reports in the German HDAX
  3. Foraging wireworms are attracted to root-produced volatile aldehydes
  4. Which attributes of audit committees are most beneficial for European companies?
  5. Vocational identity trajectories
  6. Make it your Break! Benefits of Person-Break Fit for Post-Break Affect
  7. Does money "buy" tolerance toward damage-causing wildlife?
  8. Affect and stock returns
  9. Deformation microstructures and textures of cast Mg-3Sn-2Ca alloy under uniaxial hot compression
  10. Stratification of stakeholders for participation in the governance of coastal social-ecological systems
  11. Exports and Productivity Growth
  12. Patient Positioning in Radiotherapy
  13. Do learner characteristics moderate the seductive-details-effect?
  14. On inhomogeneous Bernoulli convolutions and random power series
  15. Accelerated increase in plant species richness on mountain summits is linked to warming
  16. Reduced nitrate leaching from an Irish cropland soil under non-inversion tillage with cover cropping greatly outweighs increased dissolved organic nitrogen leaching
  17. How does the context and design of participatory decision making processes affect their outcomes? Evidence from sustainable land management in global drylands
  18. Towards a green and sustainable fruit waste valorisation model in Brazil
  19. “Sposi, Amici, al ballo, al gioco!”
  20. Was erklärt hohe Arbeitseinkommen der Selbstständigen?
  21. UK Unionism and Innovative Activity: Some Cautionary Remarks on the Basis of a Simple Cross-Country Test
  22. Antidepressants
  23. Sustainable management of marine fish stocks by means of sliding mode control
  24. The difficulty to behave as a (regulated) natural monopolist
  25. Factorial Validity of the Anxiety Questionnaire for Students (AFS)
  26. Die Bewertung des Informationssystems einer Unternehmung
  27. Multidimensional Time and Income Poverty
  28. Plant species diversity and endemism on islands and archipelagos, with special reference to the Macaronesian Islands
  29. GETT-QA
  30. Working time preferences and early and late retirement intentions
  31. Anspannung
  32. Simultantestprozedur für globale Nullhypothesen bei beliebiger Abhängigkeitsstruktur der Einzeltests
  33. Assessing Printability Maps in Additive Manufacturing of Metal Alloys
  34. Updating inflation expectations
  35. Climate Policy Cooperation Games between Developed and Developing Nations
  36. Pollination of apple variaties across Europe: Dependecy on cross pollination and visitor communities
  37. Sliding Mode Control and Observer-Based Disturbance Compensation for a Permanent Magnet Linear Motor