Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Standard

Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation. / Schwane, M.; Gagliardi, F.; Jäger, A. et al.
The Current State-of-the-Art on Material Forming. Hrsg. / Ricardo Alves de Sousa; Robertt Valente. Band 554-557 Scientific.Net , 2013. S. 787-793 (Key Engineering Materials; Band 554-557).

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Harvard

Schwane, M, Gagliardi, F, Jäger, A, Ben Khalifa, N & Tekkaya, AE 2013, Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation. in RA de Sousa & R Valente (Hrsg.), The Current State-of-the-Art on Material Forming. Bd. 554-557, Key Engineering Materials, Bd. 554-557, Scientific.Net , S. 787-793, 16th Conference on Material Forming - ESAFORM 2013, Aveiro, Portugal, 22.04.13. https://doi.org/10.4028/www.scientific.net/KEM.554-557.787

APA

Schwane, M., Gagliardi, F., Jäger, A., Ben Khalifa, N., & Tekkaya, A. E. (2013). Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation. In R. A. de Sousa, & R. Valente (Hrsg.), The Current State-of-the-Art on Material Forming (Band 554-557, S. 787-793). (Key Engineering Materials; Band 554-557). Scientific.Net . https://doi.org/10.4028/www.scientific.net/KEM.554-557.787

Vancouver

Schwane M, Gagliardi F, Jäger A, Ben Khalifa N, Tekkaya AE. Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation. in de Sousa RA, Valente R, Hrsg., The Current State-of-the-Art on Material Forming. Band 554-557. Scientific.Net . 2013. S. 787-793. (Key Engineering Materials). doi: 10.4028/www.scientific.net/KEM.554-557.787

Bibtex

@inbook{eb40395a93284a9eb6f18da5484695c8,
title = "Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation",
abstract = "The material flow in porthole dies is of crucial importance with regard to the seam weld quality in aluminum extrusion. Thus, experimental as well as numerical investigations on the effect of die geometry on the material flow were conducted. The experimental tests were performed on a 10 MN laboratory extrusion press. During the experimental trials, the extrusion ratio was varied by means of exchangeable die plates. Since the modular die allows removal of the aluminum in the welding chamber as well as in the feeders after the process, the material flow could be inspected in detail. The experimental results were used to improve the accuracy of FEA simulations, which were also conducted by commercial software. An attempt was made to improve the result quality of Eulerian FEA model regarding the simulation of an extrusion process with a gas pocket in the welding chamber. The influence of the modeling approach on the predicted material flow and on the contact pressure was analyzed and finally linked to the seam weld quality.",
keywords = "Engineering, Extrusion , FEA , Gas pocket , Porthole die , Seam weld",
author = "M. Schwane and F. Gagliardi and A. J{\"a}ger and {Ben Khalifa}, Noomane and Tekkaya, {A. E.}",
year = "2013",
doi = "10.4028/www.scientific.net/KEM.554-557.787",
language = "English",
isbn = "978-3-03785-719-9",
volume = "554-557",
series = "Key Engineering Materials",
publisher = "Scientific.Net ",
pages = "787--793",
editor = "{de Sousa}, {Ricardo Alves } and Robertt Valente",
booktitle = "The Current State-of-the-Art on Material Forming",
address = "Switzerland",
note = "16th Conference on Material Forming - ESAFORM 2013, ESAFORM 2013 ; Conference date: 22-04-2013 Through 24-04-2013",
url = "https://amcaonline.org.ar/pipermail/congresos/2012-July/000442.html",

}

RIS

TY - CHAP

T1 - Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation

AU - Schwane, M.

AU - Gagliardi, F.

AU - Jäger, A.

AU - Ben Khalifa, Noomane

AU - Tekkaya, A. E.

N1 - Conference code: 16

PY - 2013

Y1 - 2013

N2 - The material flow in porthole dies is of crucial importance with regard to the seam weld quality in aluminum extrusion. Thus, experimental as well as numerical investigations on the effect of die geometry on the material flow were conducted. The experimental tests were performed on a 10 MN laboratory extrusion press. During the experimental trials, the extrusion ratio was varied by means of exchangeable die plates. Since the modular die allows removal of the aluminum in the welding chamber as well as in the feeders after the process, the material flow could be inspected in detail. The experimental results were used to improve the accuracy of FEA simulations, which were also conducted by commercial software. An attempt was made to improve the result quality of Eulerian FEA model regarding the simulation of an extrusion process with a gas pocket in the welding chamber. The influence of the modeling approach on the predicted material flow and on the contact pressure was analyzed and finally linked to the seam weld quality.

AB - The material flow in porthole dies is of crucial importance with regard to the seam weld quality in aluminum extrusion. Thus, experimental as well as numerical investigations on the effect of die geometry on the material flow were conducted. The experimental tests were performed on a 10 MN laboratory extrusion press. During the experimental trials, the extrusion ratio was varied by means of exchangeable die plates. Since the modular die allows removal of the aluminum in the welding chamber as well as in the feeders after the process, the material flow could be inspected in detail. The experimental results were used to improve the accuracy of FEA simulations, which were also conducted by commercial software. An attempt was made to improve the result quality of Eulerian FEA model regarding the simulation of an extrusion process with a gas pocket in the welding chamber. The influence of the modeling approach on the predicted material flow and on the contact pressure was analyzed and finally linked to the seam weld quality.

KW - Engineering

KW - Extrusion

KW - FEA

KW - Gas pocket

KW - Porthole die

KW - Seam weld

UR - http://www.scopus.com/inward/record.url?scp=84880524292&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.554-557.787

DO - 10.4028/www.scientific.net/KEM.554-557.787

M3 - Article in conference proceedings

AN - SCOPUS:84880524292

SN - 978-3-03785-719-9

VL - 554-557

T3 - Key Engineering Materials

SP - 787

EP - 793

BT - The Current State-of-the-Art on Material Forming

A2 - de Sousa, Ricardo Alves

A2 - Valente, Robertt

PB - Scientific.Net

T2 - 16th Conference on Material Forming - ESAFORM 2013

Y2 - 22 April 2013 through 24 April 2013

ER -