Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Standard

Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling. / Rao, K. P.; Suresh, K.; Prasad, Y. V.R.K. et al.
Magnesium Technology 2019. Hrsg. / Neale R. Neelameggham; Vineet V. Joshi; J. Brian Jordon; Dmytro Orlov. Cham: Springer International Publishing, 2019. S. 313-318 (Minerals, Metals and Materials Series).

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Harvard

Rao, KP, Suresh, K, Prasad, YVRK, Dharmendra, C & Hort, N 2019, Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling. in NR Neelameggham, VV Joshi, JB Jordon & D Orlov (Hrsg.), Magnesium Technology 2019. Minerals, Metals and Materials Series, Springer International Publishing, Cham, S. 313-318, Magnesium Technology Symposium held at the 148th TMS Annual Meeting and Exhibition - TMS 2019, San Antonio, USA / Vereinigte Staaten, 10.03.19. https://doi.org/10.1007/978-3-030-05789-3_46

APA

Rao, K. P., Suresh, K., Prasad, Y. V. R. K., Dharmendra, C., & Hort, N. (2019). Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling. In N. R. Neelameggham, V. V. Joshi, J. B. Jordon, & D. Orlov (Hrsg.), Magnesium Technology 2019 (S. 313-318). (Minerals, Metals and Materials Series). Springer International Publishing. https://doi.org/10.1007/978-3-030-05789-3_46

Vancouver

Rao KP, Suresh K, Prasad YVRK, Dharmendra C, Hort N. Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling. in Neelameggham NR, Joshi VV, Jordon JB, Orlov D, Hrsg., Magnesium Technology 2019. Cham: Springer International Publishing. 2019. S. 313-318. (Minerals, Metals and Materials Series). doi: 10.1007/978-3-030-05789-3_46

Bibtex

@inbook{d33e369a67874aa6b090f22796f26fad,
title = "Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling",
abstract = "The processing map for hot working of cast Mg–3Sn–2Ca–0.4Al (TXA320) alloy has been validated using forging experiments to form a rib–web (cup) shaped component. Finite-element (FE) simulation has also been conducted to obtain the strain and strain rate variations in the components as well as the load–stroke curves. TXA320 has been successfully forged under optimum processing conditions (450{\^A} °C at press speeds of 1 and 0.1{\^A} mm{\^A} s−1) predicted by the processing map, where dynamic recrystallization (DRX) occurs. The microstructure obtained on these components revealed fully DRX grains and the average grain size has increased with increase in temperature. The load–stroke curves predicted by FE simulation of the forging process correlate well with experimental curves, although the simulated curves are slightly lower. Forging done in the flow instability regime of the processing map resulted in specimen fracture and the microstructure exhibited cracks at flow localization bands.",
keywords = "Forging, Mg alloy, Process simulation, Processing map, Engineering",
author = "Rao, {K. P.} and K. Suresh and Prasad, {Y. V.R.K.} and C. Dharmendra and Norbert Hort",
year = "2019",
doi = "10.1007/978-3-030-05789-3_46",
language = "English",
isbn = "978-3-030-05788-6",
series = "Minerals, Metals and Materials Series",
publisher = "Springer International Publishing",
pages = "313--318",
editor = "Neelameggham, {Neale R.} and Joshi, {Vineet V.} and Jordon, {J. Brian} and Dmytro Orlov",
booktitle = "Magnesium Technology 2019",
address = "Switzerland",
note = "Magnesium Technology Symposium held at the 148th TMS Annual Meeting and Exhibition - TMS 2019, TMS2019 ; Conference date: 10-03-2019 Through 14-03-2019",

}

RIS

TY - CHAP

T1 - Forging of Mg–3Sn–2Ca–0.4Al Alloy Assisted by Its Processing Map and Validation Through Analytical Modeling

AU - Rao, K. P.

AU - Suresh, K.

AU - Prasad, Y. V.R.K.

AU - Dharmendra, C.

AU - Hort, Norbert

N1 - Conference code: 148

PY - 2019

Y1 - 2019

N2 - The processing map for hot working of cast Mg–3Sn–2Ca–0.4Al (TXA320) alloy has been validated using forging experiments to form a rib–web (cup) shaped component. Finite-element (FE) simulation has also been conducted to obtain the strain and strain rate variations in the components as well as the load–stroke curves. TXA320 has been successfully forged under optimum processing conditions (450 °C at press speeds of 1 and 0.1 mm s−1) predicted by the processing map, where dynamic recrystallization (DRX) occurs. The microstructure obtained on these components revealed fully DRX grains and the average grain size has increased with increase in temperature. The load–stroke curves predicted by FE simulation of the forging process correlate well with experimental curves, although the simulated curves are slightly lower. Forging done in the flow instability regime of the processing map resulted in specimen fracture and the microstructure exhibited cracks at flow localization bands.

AB - The processing map for hot working of cast Mg–3Sn–2Ca–0.4Al (TXA320) alloy has been validated using forging experiments to form a rib–web (cup) shaped component. Finite-element (FE) simulation has also been conducted to obtain the strain and strain rate variations in the components as well as the load–stroke curves. TXA320 has been successfully forged under optimum processing conditions (450 °C at press speeds of 1 and 0.1 mm s−1) predicted by the processing map, where dynamic recrystallization (DRX) occurs. The microstructure obtained on these components revealed fully DRX grains and the average grain size has increased with increase in temperature. The load–stroke curves predicted by FE simulation of the forging process correlate well with experimental curves, although the simulated curves are slightly lower. Forging done in the flow instability regime of the processing map resulted in specimen fracture and the microstructure exhibited cracks at flow localization bands.

KW - Forging

KW - Mg alloy

KW - Process simulation

KW - Processing map

KW - Engineering

UR - http://www.scopus.com/inward/record.url?scp=85064601083&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-05789-3_46

DO - 10.1007/978-3-030-05789-3_46

M3 - Article in conference proceedings

AN - SCOPUS:85064601083

SN - 978-3-030-05788-6

T3 - Minerals, Metals and Materials Series

SP - 313

EP - 318

BT - Magnesium Technology 2019

A2 - Neelameggham, Neale R.

A2 - Joshi, Vineet V.

A2 - Jordon, J. Brian

A2 - Orlov, Dmytro

PB - Springer International Publishing

CY - Cham

T2 - Magnesium Technology Symposium held at the 148th TMS Annual Meeting and Exhibition - TMS 2019

Y2 - 10 March 2019 through 14 March 2019

ER -

DOI

Zuletzt angesehen

Forschende

  1. Lara Rowitz

Aktivitäten

  1. Unlocking Collection Histories: Provenance Data and Agency
  2. Higher Education for Sustainable Development: Developing and Assessing Students' Competencies For Dealing with Complexity and Uncertainty
  3. Connect US – A Discussion of Innovative Teaching Projects
  4. 4. Fuldaer Feldarbeitstage - 2013
  5. PhD seminar
  6. Methods for Ph.D.
  7. Research and Teaching Collaborations with Colleagues in Underrepresented Nations
  8. Risk preferences under heterogeneous environmental risk
  9. Trinitarische Eschtologie
  10. IEEE European Intelligence and Security Informatics Conference - EISIC 2011
  11. Companion Proceedings of the 10th International Conference on Learning Analytics & Knowledge LAK20
  12. "How Should (Religious) Emotions be Sociologically Studied?"
  13. Sustainability-oriented innovation in SMEs - Forms of collaboration for capacity building
  14. Teach About US - Innovative Ways of Teaching English: The Election Project 2020
  15. “Monitoring the Monitor? Selective Responses to Human Rights Transgressions”
  16. IWH Workshop on Labour Mobility and Inequality
  17. Syria Sanctions Relief/Termination Consultation
  18. Ringvorlesung "Maple Leaf & Stars and Stripes" WiSe 2011/2012
  19. Technifizierte Theologie. Von der Muttergottes bis zu Wall-E
  20. Arlene Raven and the Feminist Studio Workshop
  21. Amplifying the Impact of Local Initiatives in Sustainability Transformations – A pragmatic Typology
  22. 3rd International Conference on Privacy, Security, Risk and Trust and 3rd International Conference on Social Computing 2011
  23. HBSC Earthwatch Workshop - 2011
  24. The Digital Revolution as Counter Revolution
  25. Publications of environmental education programs reveal interdisciplinary boundaries
  26. Projektmanagement in vernetzten Forschungsprojekten
  27. “Human Impacts & Exploring Sanctions Termination”