Development of a magnesium recycling alloy based on the AM alloy system
Publikation: Beiträge in Sammelwerken › Aufsätze in Konferenzbänden › Forschung › begutachtet
Standard
Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS. Hrsg. / Randy S. Beals; Alan A. Luo; Neale R. Neelameggham; Mihriban O. Pekguleyuz. The Minerals, Metals & Materials Society, 2007. S. 287-292 (Magnesium Technology).
Publikation: Beiträge in Sammelwerken › Aufsätze in Konferenzbänden › Forschung › begutachtet
Harvard
APA
Vancouver
Bibtex
}
RIS
TY - CHAP
T1 - Development of a magnesium recycling alloy based on the AM alloy system
AU - Fechner, Daniel
AU - Hort, Norbert
AU - Blawert, Carsten
AU - Kainer, Karl Ulrich
N1 - Conference code: 136
PY - 2007
Y1 - 2007
N2 - The expanding use of magnesium in the automotive sector leads to an increasing quantity of scrap. The trend towards recycling of magnesium alloys is visible but so far post consumer scrap has not been used for magnesium alloy production. At the moment it is very complex to separate the magnesium post consumer scrap properly with regard to a chosen alloy. Therefore it is useful to define secondary magnesium alloys made out of blended magnesium based post consumer scrap. Due to the fact that most commercial magnesium alloys contain Al and Mn as alloying elements the AM alloy system was chosen as a base for a secondary magnesium alloy. Therefore AM50 has been modified with varying amounts of Ca, Si and Sr in the range of 0.2-2.0 wt. %. Microstructure, corrosion- and mechanical properties are investigated in the as-cast and T4 condition and possible applications are highlighted.
AB - The expanding use of magnesium in the automotive sector leads to an increasing quantity of scrap. The trend towards recycling of magnesium alloys is visible but so far post consumer scrap has not been used for magnesium alloy production. At the moment it is very complex to separate the magnesium post consumer scrap properly with regard to a chosen alloy. Therefore it is useful to define secondary magnesium alloys made out of blended magnesium based post consumer scrap. Due to the fact that most commercial magnesium alloys contain Al and Mn as alloying elements the AM alloy system was chosen as a base for a secondary magnesium alloy. Therefore AM50 has been modified with varying amounts of Ca, Si and Sr in the range of 0.2-2.0 wt. %. Microstructure, corrosion- and mechanical properties are investigated in the as-cast and T4 condition and possible applications are highlighted.
KW - AM
KW - Die-casting
KW - Magnesium
KW - Post consumer scrap
KW - Recycling alloy
KW - Engineering
UR - http://www.scopus.com/inward/record.url?scp=34547895941&partnerID=8YFLogxK
M3 - Article in conference proceedings
AN - SCOPUS:34547895941
SN - 0873396634
SN - 9780873396639
T3 - Magnesium Technology
SP - 287
EP - 292
BT - Magnesium Technology 2007 - Proceedings of Symposium Sponsored by the Magnesium Committee of the Light Metals Division of TMS
A2 - Beals, Randy S.
A2 - Luo, Alan A.
A2 - Neelameggham, Neale R.
A2 - Pekguleyuz, Mihriban O.
PB - The Minerals, Metals & Materials Society
T2 - 136th Annual Meeting and Exhibition TMS 2007
Y2 - 25 February 2007 through 1 March 2007
ER -