A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Standard

A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems. / Maier, Janine Tatjana; Schmidt, Matthias; Galizia, Fransesco Gabriele et al.
Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Hrsg. / Steffen G. Scholz; Robert J. Howlett; Rossi Setchi. Springer Singapur, 2023. S. 21-32 (Smart Innovation, Systems and Technologies; Band 338).

Publikation: Beiträge in SammelwerkenAufsätze in KonferenzbändenForschungbegutachtet

Harvard

Maier, JT, Schmidt, M, Galizia, FG, Bortolini, M & Ferrari, E 2023, A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems. in SG Scholz, RJ Howlett & R Setchi (Hrsg.), Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Smart Innovation, Systems and Technologies, Bd. 338, Springer Singapur, S. 21-32, Conference - Proceedings of the 9th International
Conference on Sustainable Design and
Manufacturing (SDM 2022), Split, Kroatien, 14.09.22. https://doi.org/10.1007/978-981-19-9205-6_3

APA

Maier, J. T., Schmidt, M., Galizia, F. G., Bortolini, M., & Ferrari, E. (2023). A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems. In S. G. Scholz, R. J. Howlett, & R. Setchi (Hrsg.), Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022) (S. 21-32). (Smart Innovation, Systems and Technologies; Band 338). Springer Singapur. https://doi.org/10.1007/978-981-19-9205-6_3

Vancouver

Maier JT, Schmidt M, Galizia FG, Bortolini M, Ferrari E. A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems. in Scholz SG, Howlett RJ, Setchi R, Hrsg., Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Springer Singapur. 2023. S. 21-32. (Smart Innovation, Systems and Technologies). doi: 10.1007/978-981-19-9205-6_3

Bibtex

@inbook{21b275929828420195b9c1d485714b1f,
title = "A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems",
abstract = "Globalization and rapid technological changes have led to increased customer requirements and an intensified competition. To remain cost-efficient, manufacturing companies move from traditional manufacturing systems towards flexible manufacturing systems. Reconfigurable manufacturing systems have proven to be an effective way of adapting to the rapidly changing market conditions. Although, an increasing interest in this topic is visible in academics and industrial practice, the research is still limited. From an industrial point of view, a fast and easy adaptable solution for managing such a system dynamically is required. Based on an optimization model, a genetic algorithm for the dynamic management of cellular reconfigurable manufacturing systems was developed. A case study shows the effects of varying the selection method, the crossover operator, and the values for the occurrence of crossover and mutation processes. The application of the genetic algorithm resulted in an improvement of around 3% compared to the best solution of the initial population. Random selection showed the best results in the respective case. Nevertheless, it can be assumed that this selection method is outperformed by others as the number of generations increases.",
keywords = "Engineering, Reconfigurable manufacturing, Genetic algorithm, Selection, Crossover, Mutation, Parameter variation",
author = "Maier, {Janine Tatjana} and Matthias Schmidt and Galizia, {Fransesco Gabriele} and Marco Bortolini and Emilio Ferrari",
note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.; Conference - Proceedings of the 9th International<br/>Conference on Sustainable Design and<br/>Manufacturing (SDM 2022), SDM 2022 ; Conference date: 14-09-2022 Through 16-09-2022",
year = "2023",
month = jan,
day = "1",
doi = "10.1007/978-981-19-9205-6_3",
language = "English",
isbn = "978-981-19-9204-9",
series = "Smart Innovation, Systems and Technologies",
publisher = "Springer Singapur",
pages = "21--32",
editor = "Scholz, {Steffen G.} and Howlett, {Robert J.} and Rossi Setchi",
booktitle = "Sustainable Design and Manufacturing",
address = "Switzerland",
url = "http://sdm-21.kesinternational.org/",

}

RIS

TY - CHAP

T1 - A Genetic Algorithm for the Dynamic Management of Cellular Reconfigurable Manufacturing Systems

AU - Maier, Janine Tatjana

AU - Schmidt, Matthias

AU - Galizia, Fransesco Gabriele

AU - Bortolini, Marco

AU - Ferrari, Emilio

N1 - Conference code: 9

PY - 2023/1/1

Y1 - 2023/1/1

N2 - Globalization and rapid technological changes have led to increased customer requirements and an intensified competition. To remain cost-efficient, manufacturing companies move from traditional manufacturing systems towards flexible manufacturing systems. Reconfigurable manufacturing systems have proven to be an effective way of adapting to the rapidly changing market conditions. Although, an increasing interest in this topic is visible in academics and industrial practice, the research is still limited. From an industrial point of view, a fast and easy adaptable solution for managing such a system dynamically is required. Based on an optimization model, a genetic algorithm for the dynamic management of cellular reconfigurable manufacturing systems was developed. A case study shows the effects of varying the selection method, the crossover operator, and the values for the occurrence of crossover and mutation processes. The application of the genetic algorithm resulted in an improvement of around 3% compared to the best solution of the initial population. Random selection showed the best results in the respective case. Nevertheless, it can be assumed that this selection method is outperformed by others as the number of generations increases.

AB - Globalization and rapid technological changes have led to increased customer requirements and an intensified competition. To remain cost-efficient, manufacturing companies move from traditional manufacturing systems towards flexible manufacturing systems. Reconfigurable manufacturing systems have proven to be an effective way of adapting to the rapidly changing market conditions. Although, an increasing interest in this topic is visible in academics and industrial practice, the research is still limited. From an industrial point of view, a fast and easy adaptable solution for managing such a system dynamically is required. Based on an optimization model, a genetic algorithm for the dynamic management of cellular reconfigurable manufacturing systems was developed. A case study shows the effects of varying the selection method, the crossover operator, and the values for the occurrence of crossover and mutation processes. The application of the genetic algorithm resulted in an improvement of around 3% compared to the best solution of the initial population. Random selection showed the best results in the respective case. Nevertheless, it can be assumed that this selection method is outperformed by others as the number of generations increases.

KW - Engineering

KW - Reconfigurable manufacturing

KW - Genetic algorithm

KW - Selection

KW - Crossover

KW - Mutation

KW - Parameter variation

UR - http://www.scopus.com/inward/record.url?scp=85147850633&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/acbf6022-9560-3f6e-a864-79f6ccec1027/

U2 - 10.1007/978-981-19-9205-6_3

DO - 10.1007/978-981-19-9205-6_3

M3 - Article in conference proceedings

SN - 978-981-19-9204-9

T3 - Smart Innovation, Systems and Technologies

SP - 21

EP - 32

BT - Sustainable Design and Manufacturing

A2 - Scholz, Steffen G.

A2 - Howlett, Robert J.

A2 - Setchi, Rossi

PB - Springer Singapur

T2 - Conference - Proceedings of the 9th International<br/>Conference on Sustainable Design and<br/>Manufacturing (SDM 2022)

Y2 - 14 September 2022 through 16 September 2022

ER -

DOI

Zuletzt angesehen

Publikationen

  1. CETUS – a baseline approach to type extraction
  2. Imitation and interindividual differences
  3. Frame-based Optimal Design
  4. Control of geometry deviation by stiffness variation in polymer deep drawing tools
  5. Comparative study of resonant circuit for power transmission via inductive link
  6. Non-invasive approaches for phenotyping of enhanced performance traits in bean
  7. Investigation of the utilization of oat pomace and acid whey in technical scale succinic acid fermentation including downstream processing
  8. Assessing mire-specific biodiversity with an indicator based approach
  9. The interaction of ecological norm orientation and external factors in the domain of travel mode choice behavior
  10. Facilitating collaborative processes in transdisciplinary research using design prototyping
  11. 3D characterization of beta-phases in AZ91D by synchrotron-radiation based microtomography
  12. Experimental and numerical analysis of material flow in porthole die extrusion
  13. Testing for Economies of Scope in European Railways
  14. Bifurcation loads of circular curved beams of glued-laminated timber with continuous lateral support
  15. Effects of different video- or text-based reflection stimuli on pre-service teachers’ emotions, immersion, cognitive load and knowledge-based reasoning
  16. Cognitive performance limitations in operating rooms
  17. Current and New Research Perspectives on Dynamic Facial Emotion Detection in Emotional Interface
  18. Consumer response to monochrome Guideline Daily Amount nutrition labels
  19. Non-destructive transmissive inductive thickness sensor for IoT applications
  20. Functional trait similarity of native and invasive herb species in subtropical China-Environment-specific differences are the key
  21. In situ synchrotron diffraction of the solidification of Mg-RE alloys
  22. MICSIM: Concept, Developments, and Applications of a PC Microsimulation Model for Research and Teaching
  23. UAV remote laser scanner improvement by continuous scanning using DC motors
  24. Decoding evidence-based entrepreneurship
  25. Microstructure and corrosion of AZ91 with small amounts of cerium
  26. Tree species and functional traits but not species richness affect interrill erosion processes in young subtropical forests
  27. Geometric control tools for robotic manipulators
  28. A Dual Kalman Filter to Identify Parameters of a Permanent Magnet Synchronous Motor
  29. A specification schema for software connectors
  30. Tormentil for active ulcerative colitis
  31. The effect of complacency potential on human operators’ monitoring behavior in aviation
  32. Multibody simulations of distributed flight arrays for Industry 4.0 applications
  33. QUANT - Question Answering Benchmark Curator
  34. Effects of welding conditions on microstructural transformations and mechanical properties in AE42-HP friction welded joints
  35. What restricts generative rejuvenation of Calluna vulgaris in continental, dry heathland ecosystems